Top Sellers
West Marine/SOSpenders PFD Rearming Kit, 3/8" Threaded Cylinder Neck Dia. from WEST MARINE
West Marine/SOSpenders PFD Rearming Kit Style: Automatic. Cylinder Weight: 38g. Cylinder Neck Diameter: 3/8" or 1/2" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: West Marine/SOSpenders PFD . Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
$100 Gift Card from WEST MARINE
Not sure what to get for your favorite boater? Give the West Marine Gift Card! Use our Gift Card at more than 370 West Marine stores, online, or through our catalog at 1-800-BOATING for merchandise purchases and backorder or special order deposits. . SHIPPING NOTICE: Gift Cards shipping ground delivery will ship 1st Class Mail to any US address FREE. For an additional fee, Gift Cards may be shipped via US Priority Mail, Two-Day or Overnight service. The Gift Cards cannot be redeemed for cash.
|
$250 Gift Card from WEST MARINE
Not sure what to get for your favorite boater? Give the West Marine Gift Card! Use our Gift Card at more than 370 West Marine stores, online, or through our catalog at 1-800-BOATING for merchandise purchases and backorder or special order deposits. . SHIPPING NOTICE: Gift Cards shipping ground delivery will ship 1st Class Mail to any US address FREE. For an additional fee, Gift Cards may be shipped via US Priority Mail, Two-Day or Overnight service. The Gift Cards cannot be redeemed for cash.
|
West Marine SOS Kid’s Hybrid Rearming Kit from WEST MARINE
West Marine SOS Kid’s Hybrid Rearming Kit Style: Automatic. Cylinder Weight: 12g. Cylinder Neck Diameter: 3/8" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: SOS Kid’s Hybrid. Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
West Marine/Stearns PFD Rearming Kit from WEST MARINE
West Marine/Stearns PFD Rearming Kit Style: Manual. Cylinder Weight: 16g. Cylinder Neck Diameter: 3/8" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin. PFD Brands Commonly Used With*: West Marine/Stearns PFD. Inflator Number: 840. *The term "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
West Marine 1000/Offshore PFD Rearming Kit from WEST MARINE
West Marine 1000/Offshore PFD Rearming Kit Style: Manual. Cylinder Weight: 33g. Cylinder Neck Diameter: 1/2" bayonet. Inflator Type: Secumar 401. Kit Contents: Cylinder with seal indicator. PFD Brands Commonly Used With*: West Marine 1000/Offshore PFD . Inflator Number: 401. *The term "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
WM Self-Coiling Hose - 15' from WEST MARINE
Featuring an improved flow rate and field-serviceable couplings! With an improved flow rate of 360gph, this hose delivers a powerful stream of water to make deck and boat wash-downs quick and easy. In the unlikely event of a rupture, the couplings can be removed with common hand tools, the hose shortened and the couplings replaced, which is a big advantage if you happen to be offshore! 90% usable length. Field-serviceable couplings. Strain relief at hose connection end'. 360gph flow rate.
|
|
|
PowerPro Lower Unit Gear Lube from WEST MARINE
An 80W90 synthetic gear lube that protects high-performance lower units in extreme operating conditions. Highly recommended for engines over 100hp. Meets or exceeds API MT-1 and GL-5 ratings.
|
Swivel Anchor Connector, 5/16"–7/16" Chain, 2750lb. SWL from WEST MARINE
18-8 stainless swivel connectors prevent snagging at the anchor/chain connection, slide easily over anchor rollers and prevent the chain from becoming twisted while the anchor is set. Attach with a single set screw (using the Allen wrench included).
|
1/8" NPT X 5/16" Brass hose barb from MOELLER
1/8 NPT X 5/16" Brass hose barbs with male threads.
|
Braided Polyester Cord, by the Foot from NEW ENGLAND ROPES
A low-stretch cord that’s great for flag halyards, foredeck netting, or light-air spinnaker sheets. Sold by the foot. Diameter: 1/8". Best use: Utility cord, flag halyards . Construction: Braided polyester . Breaking strength: 530lb. . Stretch: 3% at 15% of breaking strength .
|
50' Braided Polyester Cord from NEW ENGLAND ROPES
A low-stretch cord that’s great for flag halyards, foredeck netting, or light-air spinnaker sheets. Length: 50'. Diameter: 1/8". Best use: Utility cord, flag halyards . Construction: Braided polyester . Breaking strength: 530lb. . Stretch: 3% at 15% of breaking strength .
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
Acetal Thru-Transom Scupper from WEST MARINE
One-way rubber flapper valve and thru-hull fitting. For 1-1/2"ID hose. Overall length: 6-1/4". Installation hole size: 2". Max.
|
|
SWL from WEST MARINE, 1, 8", 4", 5, 8", 16", 4", 16"
|
|
Home -> Anchor & Docking -> Chain & Mooring->Bridle Plate Mooring System
This mooring attachment system allows you to easily attach up to three lines from the mooring to your boat. The system maintains mooring line separation to minimize chafe and increase line life. No more tangled mooring lines! Multihull systems use three lines to the boat and Monohull systems use two lines to the boat. There are two systems available for both types of boats: one with shackle attachment points and one with safety shackles and swivel for ease of use. Breaking Strength: 32,000lb.
Part No: 33040
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Bridle Plate Mooring System
This mooring attachment system allows you to easily attach up to three lines from the mooring to your boat. The system maintains mooring line separation to minimize chafe and increase line life. No more tangled mooring lines! Multihull systems use three lines to the boat and Monohull systems use two lines to the boat. There are two systems available for both types of boats: one with shackle attachment points and one with safety shackles and swivel for ease of use. Breaking Strength: 32,000lb.
Part No: 33050
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Bridle Plate Mooring System
This mooring attachment system allows you to easily attach up to three lines from the mooring to your boat. The system maintains mooring line separation to minimize chafe and increase line life. No more tangled mooring lines! Multihull systems use three lines to the boat and Monohull systems use two lines to the boat. There are two systems available for both types of boats: one with shackle attachment points and one with safety shackles and swivel for ease of use. Breaking Strength: 32,000lb.
Part No: 33040S
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Color Coated Anchor Chain
Galvanized, proof-coil anchor chain is PVC coated to protect boat surfaces. Specially formulated PVC offers excellent flexibility and durability.
Part No: 2115-RD
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Galvanized Steel Screw Pin Anchor Shackles
Roughly the same strength as proof coil chain of the same size. To prevent accidental opening, always seize the shackle pin with safety wire. For increased strength, use one size larger than the chain, especially with High-Test chain (the pins will still fit). Meet Fed. Spec. RR-C-271b Type IV Class 1.
Part No: 6590S
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Galvanized Steel Snaps
Moderately strong steel snaps with spring-loaded jaws.
Part No: LNKSPG5/16WM
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Galvanized Steel Snaps
Moderately strong steel snaps with spring-loaded jaws.
Part No: LNKSPG1/4WM
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Galvanized Thimbles
For rope eye-splice. Protects ropes from achor shackles. Forged Hot Dipped Galvanized Steel.
Part No: 172019
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Grade 40 Hot-Dip Galvanized High-Test Chain
Hot-Dipped galvanized Grade 40 HT Acco anchor chain! An industry standard, hot-galvanized, high-tensile anchor chain combines both high tensile strength and is resistance to wear. Meets ISO standards . Calibrated to ensure the proper fit for your windlass. 7200 lbs.
Part No: 500140702
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Grade 40 Hot-Dip Galvanized High-Test Chain
1/4IN HIGH TEST CHAIN.
Part No: 500193082
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Grade 40 Hot-Dip Galvanized High-Test Chain
5/16IN HIGH TEST CHAIN.
Part No: 500193083
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Grade 40 Hot-Dip Galvanized High-Test Chain
3/8IN HIGH TEST CHAIN.
Part No: 500193084
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Grade 40 Hot-Dip Galvanized High-Test Chain
3/8" HT G-40 ISO Chain 200 Drum.
Part No: 5001-92461
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Grade 40 Hot-Dip Galvanized High-Test Chain
Chain-Anchr HT ISO HD G40 1/2|Chain-Anchr HT ISO HD G40 1/2.
Part No: 500191626
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Grade 43 ISO High-Test Windlass Chain
A high tensile strength carbon steel anchor (windlass) chain with an ISO short link. The short link makes it more flexible and ideally suited as a windlass chain. Check fit or contact windlass manufacturer before purchase. This extra thick hot dip galvanized finish is recommended for all marine applications. Grade 43 ISO. Material: Carbon steel.
Part No: 501340601
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Grade 43 ISO High-Test Windlass Chain
A high tensile strength carbon steel anchor (windlass) chain with an ISO short link. The short link makes it more flexible and ideally suited as a windlass chain. Check fit or contact windlass manufacturer before purchase. This extra thick hot dip galvanized finish is recommended for all marine applications. Grade 43 ISO. Material: Carbon steel.
Part No: 5001-40801
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Grade 70 Hot Dip Galvanized Lashing Chain
Grade 70 high-test chain is extremely strong for its light weight. Its high strength-to-weight ratio is achieved by special heat treating and it resists wear because of its exceptional hardness properties. High strength, light weight and hot dip galvanizing make Grade 70 chain ideal for boating applications.
Part No: 5201-40601
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Grade 70 Hot Dip Galvanized Lashing Chain
Grade 70 high-test chain is extremely strong for its light weight. Its high strength-to-weight ratio is achieved by special heat treating and it resists wear because of its exceptional hardness properties. High strength, light weight and hot dip galvanizing make Grade 70 chain ideal for boating applications.
Part No: 5213-40401
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Grade 70 Hot Dip Galvanized Lashing Chain
Grade 70 high-test chain is extremely strong for its light weight. Its high strength-to-weight ratio is achieved by special heat treating and it resists wear because of its exceptional hardness properties. High strength, light weight and hot dip galvanizing make Grade 70 chain ideal for boating applications.
Part No: 5201-40501
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Grade 70 Hot Dip Galvanized Lashing Chain
Grade 70 high-test chain is extremely strong for its light weight. Its high strength-to-weight ratio is achieved by special heat treating and it resists wear because of its exceptional hardness properties. High strength, light weight and hot dip galvanizing make Grade 70 chain ideal for boating applications.
Part No: 5201-40402
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Grade 70 Hot Dip Galvanized Lashing Chain
Grade 70 high-test chain is extremely strong for its light weight. Its high strength-to-weight ratio is achieved by special heat treating and it resists wear because of its exceptional hardness properties. High strength, light weight and hot dip galvanizing make Grade 70 chain ideal for boating applications.
Part No: 5201-40502
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Grade 70 Hot Dip Galvanized Lashing Chain
Grade 70 high-test chain is extremely strong for its light weight. Its high strength-to-weight ratio is achieved by special heat treating and it resists wear because of its exceptional hardness properties. High strength, light weight and hot dip galvanizing make Grade 70 chain ideal for boating applications.
Part No: 5213-40601
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Grade 70 Hot Dip Galvanized Lashing Chain
Grade 70 high-test chain is extremely strong for its light weight. Its high strength-to-weight ratio is achieved by special heat treating and it resists wear because of its exceptional hardness properties. High strength, light weight and hot dip galvanizing make Grade 70 chain ideal for boating applications.
Part No: 5201-40602
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Grade 70 Hot Dip Galvanized Lashing Chain
Grade 70 high-test chain is extremely strong for its light weight. Its high strength-to-weight ratio is achieved by special heat treating and it resists wear because of its exceptional hardness properties. High strength, light weight and hot dip galvanizing make Grade 70 chain ideal for boating applications.
Part No: 5201-40401
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Happy Hooker Mooring Hook Tip
Makes picking up moorings a snap!Passes and returns a mooring line through a ring or eye automatically. No parts to retrieve when pulling away. Attaches to nearly any diameter pole (not included) with bolt or hose clamp.
Part No: B203MAR-00-000
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->High Test Chain
High-test chain, sold by the foot.
Part No: 5013-40571
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->High Test Chain
High-test chain, sold by the foot.
Part No: 5013-40471
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Hot Dipped Galvanized "O" Rings
Hot Dipped Galvanized Steel Multiple application.
Part No: 192630
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Lap Links
Laps arel ong and tapered for a smooth assembly.
Part No: 4417740
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Lap Links
Laps arel ong and tapered for a smooth assembly.
Part No: 4417840
|
|
|
