Gulf Islands Cruising Guide from ROBERT HALE
covers the waterways from Juan de Fuca Strait to Comox including Hornby and Denman and Lasqueti Islands.

Trim Tab Zinc Anode from CANADA METALS
Attaches to standard Bennett trim tabs where actuator bolts to plate.

Zinc Grouper Anode from CANADA METALS
Supplements your boat's existing anodes An excellent anodic device to supplement a vessel’s existing anode system, especially to counteract stray current from defective shore power. Clip to bolt on outdrive. Clip to grounding strap if possible or wire items together with copper wire and clip to wire. Do not connect to negative battery terminals. Dimensions: 8 1/4"L x 3 1/4"W x 1 3/8"D.

Aluminum Anode Kit Bravo II & III from CANADA METALS
Offered in aluminum, for use in salt or brackish water, or magnesium, for freshwater only.

Series 40 Ratchet Block, Single/Cleat, 385lb. SWL, 3.4oz. from RONSTAN
Practical Sailor's Ratchet Block Click-Off rated Ronstan's Orbit block "Overall, the most impressive with its grip, versatility, and lightweight design. " The newest addition to Ronstan’s Orbit range of super lightweight, fiber-reinforced blocks. Ideal for sheet applications on dinghies up to 16' and control line applications for small keel boats. There are two styles of Series 40 ratchet blocks. Many of the top Grand Prix Laser sailors are switching to Orbit blocks.

Sanding Discs - 5" Velcro-Backed, 40-Grit, 5 Pack from 3M PRODUCTS
Convenient hook and loop disk attachmentAdapts a 1/4” or 3/8” electric drill so it may be used as a 5” disc sander. Includes three Velcro-backed sanding discs (120-, 80- and 40-grit). Recommended Usage: Sanding fiberglass/gelcoat, paint, wood and metal. Abrasive Material: Aluminum oxide. Backing Type: Hook and loop . Disc Size: 5" disc .

Marine-Tex Putty, Gray, 14oz. from TRAVACO
Versatile epoxy putty for wide variety of repairs Repairs damaged hulls and equipment stronger than before. Fixes gel coat chips and leaks in fuel tanks, water tanks, piping, engine blocks, cracked crank cases, etc. Can be used in working temperatures of -40° to 250°F. Marine-Tex bonds to all metals, plastics, plywood, etc. Handles like putty. Formulation: Two-part epoxy putty . Recommended Usage: Bonds to aluminum, PVC, fiberglass, most plastics, metals, glass, cement and hard/soft woods .

7/16" G40 Chain, 7200lb. SWL, 21,600lb. Breaking Strength, 2.05lb./ft., 300' Standard Pack from ACCO CHAIN
Hot-Dipped galvanized Grade 40 HT Acco anchor chain! An industry standard, hot-galvanized, high-tensile anchor chain combines both high tensile strength and is resistance to wear. Meets ISO standards . Calibrated to ensure the proper fit for your windlass. 7200 lbs.

P750 Ice Eater, 115V, 25' Cord from POWER HOUSE
The P750 de-ices diameter of approximately 60 feet Prevent damaging ice formation around your boat’s hull with a 3/4 hp energy efficient Ice Eater. Motor is matched with a permanent-split capacitor to ensure quick, high-torque and smooth operation from the single-phase induction motor. Copper, stator motor windings are double-insulated, to guard against water. Internal, hard-faced mechanical seal is itself immersed in dielectric lubricating fluid and protects the motor against water intrusion.

Boeshield T-9 Spray Lube from BOESHIELD
Penetrates, lubricates and protects This combination of solvents, lubricants and waxes was designed to penetrate, lubricate and protect surfaces, and to displace moisture. It dries to a thin, waxy, corrosion-preventing film that clings to metal for months. It will loosen rusty and corroded parts and is safe on paints, plastics and vinyls. Aerosol spray gets into cracks and crevices. 12oz.

10 Micron Diesel Fuel Filter/Water Separator with Metal Bowl from RACOR-PARKER FILTRAT
Racor’s Aquabloc filter media removes virtually 100% of water and solid contaminants. Filters have die-cast aluminum heads and come in different sizes for diesel engines and any rate of fuel flow. To be used on the suction side of the pump. See-thru bowls allow visual inspection for water; metal bowls are recommended for use in areas of high heat and are required by the US Coast Guard on inboard engines and gensets. Inlets/Outlets: 1/4" NPT female . Bowl Material: See-thru polymer .

Power Bubbles 12V DC Aerator from MARINE METALS
This system runs on low current as it's dual bellows aerate up to 2L per minute of air. It saturates circulating water with oxygen. Double discharge allows aeration of one or two livewells. Increases flow capacity. Includes 10' of air tubing. Two large airstones allow the pump to be mounted in any protected area. Suitable for fresh or saltwater. Two anti-siphon valves protect pump against water intrusion. Quietly operates with solid-state circuits. Draw: 1/4A at 12V DC.

Inflatable Life Vest, Orange from Ultra 4000 Manual/Automatic Inflatable Life Vest
USCG-Approved Type V for use when worn on uninspected commercial vessels less than 40 ft. Approved substitute for a Type II or III PFD only when worn and used in accordance with the owner's manual. High-visibility reflective tape and emergency whistle on bladder . Halkey-Roberts 1F automatic inflator with single point indicator . Automatic inflation when submerged in water; manual inflation by pulling lanyard or by oral tube . Provides 33. Pocket to store extra cylinder or gear and D-ring .

Inflatable Life Vest, Black from Ultra 4000 Manual/Automatic Inflatable Life Vest
USCG-Approved Type V for use when worn on uninspected commercial vessels less than 40 ft. Approved substitute for a Type II or III PFD only when worn and used in accordance with the owner's manual. High-visibility reflective tape and emergency whistle on bladder . Halkey-Roberts 1F automatic inflator with single point indicator . Automatic inflation when submerged in water; manual inflation by pulling lanyard or by oral tube . Provides 33. Pocket to store extra cylinder or gear and D-ring .

Halyard Kit, 1/8" Wire Dia., 3/8" Line Dia., 40' Wire Length, 40' Line Length from WEST MARINE RIGGING
Convenient, do-it-yourself kits offer an economical way to replace old halyards We offer these kits for those who want to replace their old halyards or install new low-stretch halyards. Made of the highest quality 7x19 oil-free stainless wire and New England Ropes premium white Sta-Set yacht braid. Comes with a Flemish eye at the rope end, and a thimble and sleeve, but no shackle. Rope Type: Sta-Set Yacht Braid . Shackle: Flemish eye splice, sleeve and thimble, no shackle .