Top Sellers
Deck Fill, Gas, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
|
Gusher 10 Pump from WHALE PUMPS
Die-cast, epoxy-coated, anodized alloy, synthetic neoprene rubber diaphragm and stainless steel. Removable stainless handle with lanyard. To complete the installation, select either the Aluminum or Plastic Thru-Deck Kit, which seal the installation against water intrusion and and give it a finished look. Nitrile Diaphragm Kit, AK3714, available through special order. Material: Anodized aluminum . Dimensions: 8"H x 4-1/8"W x 5-3/4"L . Port Sizes: 1-1/2" .
|
Fuel Hose, Type B-2 5/16" from MOELLER
We offer 5/16" and 3/8" SCG B-2 alcohol-resistant hose as used in pre-assembled fuel line. Sold by the foot.
|
5/16" Wire Rope Clamp from SEADOG
Investment Cast 316 Stainless Body / AISI 304 Stainless U-Bolt. Accepts 5/16" wire. 1-5/8" Long. 1-3/8" wide.
|
4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
|
60mm Racing Fiddle Block with Becket & Cleat, 882lb. SWL, 12.4oz. from LEWMAR
For chafe-free, low-friction tackles. Sheave: Anodized aluminum alloy . Ball Bearings: Delrin® . Sheave Size: 2-3/8" (60mm) & 1-5/8" (40mm) . Line Dia. : 3/8" max. . Cheek Material/Finish: Anodized aluminum alloy . Shackle/Strap Type: Swivel with three-way locking, drilled-out head . Cleat: Model with cleat: adjustable arm, aluminum cam cleat .
|
#809 Notched Spreader from WEST SYSTEM
4'' x 4'' plastic spreader with 1/8'', 3/16'' and 1/4'' notches on three sides for quickly applying modified epoxy at a constant thickness.
|
|
|
Flush Lock and Latch from PERKO
Black plastic, with stainless steel "D" ring handle, stem and lock nut. Two O-rings for increased water resistance. Position indicator shows open or closed position. Lock with 2 keys. Door thickness: 3/8" to 1-1/4" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 1-1/16" to 2-9/16" .
|
Brightside Pre-Kote Primer - Gray, Quart from INTERLUX
Fills minor blemishes and sands easilyOne part primer for use with Brightside or any other one-part topside enamel. Microspheres provide high build and improved sandability. (Replaces Brightside Primer and 279 White Undercoater. ) Application: Brush, roller, airless/conventional spray . Number of Coats Recommended: One or two, depending on surface condition. Drying: Overcoating: 6 to 12 hrs. Drying Time: To touch: 1 to 3 hrs. Coverage: Brush: 112 sq. ft/qt, 450 sq. ft/gal; Spray: 87 sq.
|
Flush Lock - Black/Stainless Steel with Adjustable Offset Cam Bar from PERKO
Black plastic with stainless steel "D" ring handle and with adjustable offset cam bar. Two O-rings for increased water resistance. Position indicator shows open or closed position. Door thickness: 3/8" to 1-14" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 3/8" to 3" .
|
Boater's Pocket Reference from ROBERT HALE
Thomas McEwen. A pocket-sized alternative to Chapman, jam-packed with information boaters need to know! Includes a wealth of how-to info, plus reference facts, figures, formulas, graphs and tables about boating. Paperback . 3 1/4"W x 5 3/8"H x 15/16"D. . 766pp.
|
|
|
Oval Deck Pipe from SEAFIT
Accepts line, thimble, shackle and chain to 3/8". Hook under cover holds chain and cover in place. Material: Chromed-plated bronze . Flange: 6. 25" x 4. 5" . I. D. : 4-3/6"L x 2-3/8"W .
|
Acetal Thru-Transom Scupper from WEST MARINE
One-way rubber flapper valve and thru-hull fitting. For 1-1/2"ID hose. Overall length: 6-1/4". Installation hole size: 2". Max.
|
|
Unidirectional Carbon Tapes - 1, 5, 3, Epoxy Pigment - White, 2" x 6"
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->#805 & #806 Poly Mixing Pots
Cured epoxy easily ''pops out'' of these poly pots .
Part No: 806
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->#808 Flexible Plastic Spreader
Double-edged, reusable squeegee for flow coating, fairing and filling applications, and applying fabrics.
Part No: 808-2
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Biaxial Fiberglass Cloth
For use with polyester or epoxy resins as a reinforcement when laying up or repairing a damaged area.
Part No: 65-817PS
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Cell-O-Fill Filler
Derived from all natural alpha cellulose, the fibrous ribbons create a matrix with the epoxy and help reduce sagging and slumping. Used in place of Colloidal Silica, it will not billow in the air like silica and you will need half as much to create the same thickness.
Part No: 25-003
|
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Cell-O-Fill Filler
Derived from all natural alpha cellulose, the fibrous ribbons create a matrix with the epoxy and help reduce sagging and slumping. Used in place of Colloidal Silica, it will not billow in the air like silica and you will need half as much to create the same thickness.
Part No: 25-004
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Colloidal Silica
Fumed Colloidal Silica (also known as CAB-0-SIL) Use when an extremely hard solid with high density is needed, i. e. structural bonding, filling and filleting. Add strength to a top coat by using a small amount of Colloidal Silica ( about a tablespoon per 4 ounces). This will add strength and finish absolutely clear.
Part No: 25-002
|
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Colloidal Silica
Fumed Colloidal Silica (also known as CAB-0-SIL) Use when an extremely hard solid with high density is needed, i. e. structural bonding, filling and filleting. Add strength to a top coat by using a small amount of Colloidal Silica ( about a tablespoon per 4 ounces). This will add strength and finish absolutely clear.
Part No: 25-001
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Episize™ Glass Tape
Episize™ Glass Tape Versatile WEST SYSTEM EpisizeTM 9-oz. woven fabric tapes are ideal for reinforcing chines, hull/deck corners and similar structural applications. When bonded with WEST SYSTEM epoxy, they provide additional tensile strength to resist hairline crack development and abrasion. #729 2" wide x 10' or 50 yard rolls. #731 3" wide x 50 yard roll. #732 4" wide x 10' or 50 yard rolls.
Part No: 729
|
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Episize™ Glass Tape
Episize™ Glass Tape Versatile WEST SYSTEM EpisizeTM 9-oz. woven fabric tapes are ideal for reinforcing chines, hull/deck corners and similar structural applications. When bonded with WEST SYSTEM epoxy, they provide additional tensile strength to resist hairline crack development and abrasion. #729 2" wide x 10' or 50 yard rolls. #731 3" wide x 50 yard roll. #732 4" wide x 10' or 50 yard rolls.
Part No: 732-10
|
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Episize™ Glass Tape
Episize™ Glass Tape Versatile WEST SYSTEM EpisizeTM 9-oz. woven fabric tapes are ideal for reinforcing chines, hull/deck corners and similar structural applications. When bonded with WEST SYSTEM epoxy, they provide additional tensile strength to resist hairline crack development and abrasion. #729 2" wide x 10' or 50 yard rolls. #731 3" wide x 50 yard roll. #732 4" wide x 10' or 50 yard rolls.
Part No: 733
|
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Episize™ Glass Tape
Episize™ Glass Tape Versatile WEST SYSTEM EpisizeTM 9-oz. woven fabric tapes are ideal for reinforcing chines, hull/deck corners and similar structural applications. When bonded with WEST SYSTEM epoxy, they provide additional tensile strength to resist hairline crack development and abrasion. #729 2" wide x 10' or 50 yard rolls. #731 3" wide x 50 yard roll. #732 4" wide x 10' or 50 yard rolls.
Part No: 732
|
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Episize™ Glass Tape
Episize™ Glass Tape Versatile WEST SYSTEM EpisizeTM 9-oz. woven fabric tapes are ideal for reinforcing chines, hull/deck corners and similar structural applications. When bonded with WEST SYSTEM epoxy, they provide additional tensile strength to resist hairline crack development and abrasion. #729 2" wide x 10' or 50 yard rolls. #731 3" wide x 50 yard roll. #732 4" wide x 10' or 50 yard rolls.
Part No: 729-10
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Episize™ Unidirectional Carbon Tape
Episize™ Unidirectional Carbon Tapes Carbon fiber unidirectional reinforcing tapes are used to improve tensile and compressive strength and stiffness in one direction while adding minimum thickness and weight. Fiber bundles are held in place by a polyester fill thread for easy handling and wet out. . 015" thickness. #702 (144k fibers/inch width) 11/2" wide x 12' or 50' rolls.
Part No: 702-12
|
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Episize™ Unidirectional Carbon Tape
Episize™ Unidirectional Carbon Tapes Carbon fiber unidirectional reinforcing tapes are used to improve tensile and compressive strength and stiffness in one direction while adding minimum thickness and weight. Fiber bundles are held in place by a polyester fill thread for easy handling and wet out. . 015" thickness. #702 (144k fibers/inch width) 11/2" wide x 12' or 50' rolls.
Part No: 703-50
|
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Episize™ Unidirectional Carbon Tape
Episize™ Unidirectional Carbon Tapes Carbon fiber unidirectional reinforcing tapes are used to improve tensile and compressive strength and stiffness in one direction while adding minimum thickness and weight. Fiber bundles are held in place by a polyester fill thread for easy handling and wet out. . 015" thickness. #702 (144k fibers/inch width) 11/2" wide x 12' or 50' rolls.
Part No: 703-12
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Epoxy Color Pigments
WEST SYSTEM pigments are epoxy-based liquid colorants used to tint the epoxy mixture to provide an even color base for the final finish system. Cured, pigmented epoxy surfaces are not a final finish surface, but require an additional opaque or UV filter coating for ultraviolet protection. Add to the mixed resin/hardener at a rate of approximately one teaspoon of pigment to 8 fl oz of epoxy. More pigment will increase opaqueness and mixture viscosity. 501 White Pigment - One 4 oz. - One 4 oz.
Part No: 501-8
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Glue Application Brushes
These brushes are useful in a wide variety of small bonding and coating applications.
Part No: 803-144
|
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Glue Application Brushes
These brushes are useful in a wide variety of small bonding and coating applications.
Part No: 803-12
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Large Capacity Metering Pumps
306-25 - 5:1 Ratio Metering Pump For metering larger quantities of 105 Resin and 205 or 206 (5:1 ratio) Hardeners. The 306-25 Pump will reduce mixing time and waste on large projects. Reservoirs hold one gallon of resin, one quart of hardener. Dispenses approximately 0. Can be converted to a 3:1 ratio. 306-23 - 3:1 Ratio Metering Pump Similar to 306-25 Metering Pump described above. Can be converted to a 5:1 ratio. 309 High-Capacity Gear Pump For use with 205 or 206 (5:1 ratio) Hardeners.
Part No: 309
|
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Large Capacity Metering Pumps
306-25 - 5:1 Ratio Metering Pump For metering larger quantities of 105 Resin and 205 or 206 (5:1 ratio) Hardeners. The 306-25 Pump will reduce mixing time and waste on large projects. Reservoirs hold one gallon of resin, one quart of hardener. Dispenses approximately 0. Can be converted to a 3:1 ratio. 306-23 - 3:1 Ratio Metering Pump Similar to 306-25 Metering Pump described above. Can be converted to a 5:1 ratio. 309 High-Capacity Gear Pump For use with 205 or 206 (5:1 ratio) Hardeners.
Part No: 306-25
|
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Large Capacity Metering Pumps
306-25 - 5:1 Ratio Metering Pump For metering larger quantities of 105 Resin and 205 or 206 (5:1 ratio) Hardeners. The 306-25 Pump will reduce mixing time and waste on large projects. Reservoirs hold one gallon of resin, one quart of hardener. Dispenses approximately 0. Can be converted to a 3:1 ratio. 306-23 - 3:1 Ratio Metering Pump Similar to 306-25 Metering Pump described above. Can be converted to a 5:1 ratio. 309 High-Capacity Gear Pump For use with 205 or 206 (5:1 ratio) Hardeners.
Part No: 306-23
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Resin Coloring Agent
Match colors like a pro with these coloring agentsFor use with polyester or epoxy resins, fillers, or putties. These tints also work well with nonskid coatings. Use with West Marine Gel Coat or Evercoat Polyester Gel Paste.
Part No: 100509
|
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Resin Coloring Agent
Match colors like a pro with these coloring agentsFor use with polyester or epoxy resins, fillers, or putties. These tints also work well with nonskid coatings. Use with West Marine Gel Coat or Evercoat Polyester Gel Paste.
Part No: 100505
|
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Resin Coloring Agent
Match colors like a pro with these coloring agentsFor use with polyester or epoxy resins, fillers, or putties. These tints also work well with nonskid coatings. Use with West Marine Gel Coat or Evercoat Polyester Gel Paste.
Part No: 100507
|
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Resin Coloring Agent
Match colors like a pro with these coloring agentsFor use with polyester or epoxy resins, fillers, or putties. These tints also work well with nonskid coatings. Use with West Marine Gel Coat or Evercoat Polyester Gel Paste.
Part No: 100503
|
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Resin Coloring Agent
Match colors like a pro with these coloring agentsFor use with polyester or epoxy resins, fillers, or putties. These tints also work well with nonskid coatings. Use with West Marine Gel Coat or Evercoat Polyester Gel Paste.
Part No: 100508
|
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Resin Coloring Agent
Match colors like a pro with these coloring agentsFor use with polyester or epoxy resins, fillers, or putties. These tints also work well with nonskid coatings. Use with West Marine Gel Coat or Evercoat Polyester Gel Paste.
Part No: 100506
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Resin Rollers
Handy resin rollers help get the job done rightDurable plastic rollers with ergonomic handles reduce hand fatigue. They work well for multiple-layer laminating jobs. Remove air bubbles and create inside corners with these rollers.
Part No: FR-1307
|
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Resin Rollers
Handy resin rollers help get the job done rightDurable plastic rollers with ergonomic handles reduce hand fatigue. They work well for multiple-layer laminating jobs. Remove air bubbles and create inside corners with these rollers.
Part No: FR-1303
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Vacuum Bagging Materials
Vacuum bagging is a clamping system used for laminating a wide range of fabrics, core materials and veneers. It offers many advantages over conventional clamping. By laminating over simple molds, composites can be molded into a wide range of functional shapes. #879 Release Fabric Economical Release Fabric is a tough, finely woven nylon fabric treated with a release agent. Peels easily and leaves a smooth textured surface, ready for bonding or finishing. Available in 60" wide x 2 yd.
Part No: 882-20
|
|
|
