Top Sellers
Removable Chafe Gear Wrap, 4', for 3/4"– 7/8" Line from MEGAFEND
Protect your docklines from chafe and extend their life with attractive ballistic nylon sleeves featuring easy Velcro™ installation/removal. Ends include 1/8"dia. nylon cords that attach to line to prevent slip. Finished edges create an aesthetically pleasing, uniform look.
|
2-3/4"L Small Swivel Bail Shackle, 5/8" Snap, 7/16" Bail, 2645lb. MWL from WICHARD
Highest quality drop-forged 17-4 PH stainless-steel shackles are beautifully polished, with smooth contours. Great strength and reliability.
|
Windshield Screw Cover Foam, 1/4"H x 3/4"W x 8'L from TACO PRODUCTS
Easy do-it-yourself solution for door, windshield or hatch leaks. Specially formulated sponge rubber is engineered to withstand corrosive environments. Windshield Screw Cover Foam gives your windshield a finished look.
|
Striping Tape - Dark Blue, 3/4" from SEAFIT
Premium 2mil. thick vinyl striping tape makes it easy to add a colorful accent to your boat! Made from the same material used in quality custom boat graphics. It will not crack or peel, even in salt water, and the colors last from 5–7 years without fading. It can even be applied below the waterline. It can be bent, waved, and applied around corners. Should you change your mind or decide to update the look of your boat, simply remove the tape–no need to sand or ruin your paint or finish.
|
300 Series Fairlead Block, Fixed Style, 2-7/32" x 3/4" from SCHAEFER
Same as the Schaefer 200 Series fairlead blocks, but with twice the working load. Use #10 fasteners. Configuration: Lead block. Sheave: UV-stabilized white Delrin®. Ball Bearings: Delrin. Sheave Size: 1-7/16" (37mm). Line Diameter: 7/16". Cheek Material/Finish: Polished stainless.
|
Step Pad, 10-3/4" x 5-1/4", Blue from LEWMAR
Maintain your footing under all conditions! Self-adhesive, diamond-patterned, nonskid pads are great for decks, steps, dinghy floors, personal watercraft, etc. They resist wear and tear, peeling, saltwater, fuels and chemicals. Pads have rounded edges and are precut to fit most common step sizes. Trim with scissors for a custom fit. Peel-and-stick installation. Sold in pairs.
|
AC 36-Position Circuit Breaker Panel, 27 Circuit Breakers, 14-3/4" x 11-1/4" from BLUE SEA SYSTEMS
Blue Sea Systems designs innovative, reliable, superior quality electrical system products. Blue Sea Systems products are tested aboard the company's boat to ensure reliability and ease of use in real world conditions. This results in the delivery of innovative, reliable electrical products that exceed the quality standards of other companies. Blue Sea Systems' in-house lab is used to load test and thermal test products to ensure they will perform under marine conditions. Digital Multimeter.
|
3/4" NPT ARG Water Strainer with Plastic Strainer Basket from GROCO
The first line of defense to your engine’s cooling system. Well-made traditional bronze strainer head. No leaks under pressure or vacuum. Cast mounting brackets. Mounting system allows removal of the strainer without tools. Buna-N “O-ring” seal at strainer cap.
|
|
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
|
|
Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.
|
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
PE-1 Lexan Mast Pad Eye from FORESPAR
For use on our small poles. 1-3/4"H x 1-1/4" x 5/8"dia. ring. Same ring as supplied with 4-8 and 6-12 poles.
|
4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
|
|
3, x 1' L from B, 4" W x 3' L from B, 8" L from B, 8" Thick x 3 3, 4" from DR
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Teak Lumber
For over three centuries Van de Stadt has been supplying timber from Zaandam in the Netherlands to the boatbuilding industry as wooden mercantile vessels of the past have transitioned to the luxury yachts of today. Van de Stadt teak is air-dried before kiln drying to ensure a pleasant, homogenous appearance to the color and grain.
Part No: 0.37 5.75 3.0
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Teak Lumber
For over three centuries Van de Stadt has been supplying timber from Zaandam in the Netherlands to the boatbuilding industry as wooden mercantile vessels of the past have transitioned to the luxury yachts of today. Van de Stadt teak is air-dried before kiln drying to ensure a pleasant, homogenous appearance to the color and grain.
Part No: 0.87 3.87 1.0
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Teak Lumber
For over three centuries Van de Stadt has been supplying timber from Zaandam in the Netherlands to the boatbuilding industry as wooden mercantile vessels of the past have transitioned to the luxury yachts of today. Van de Stadt teak is air-dried before kiln drying to ensure a pleasant, homogenous appearance to the color and grain.
Part No: 0.50 1.87 3.0
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Teak Lumber
For over three centuries Van de Stadt has been supplying timber from Zaandam in the Netherlands to the boatbuilding industry as wooden mercantile vessels of the past have transitioned to the luxury yachts of today. Van de Stadt teak is air-dried before kiln drying to ensure a pleasant, homogenous appearance to the color and grain.
Part No: 0.87 1.87 4.0
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Teak Lumber
For over three centuries Van de Stadt has been supplying timber from Zaandam in the Netherlands to the boatbuilding industry as wooden mercantile vessels of the past have transitioned to the luxury yachts of today. Van de Stadt teak is air-dried before kiln drying to ensure a pleasant, homogenous appearance to the color and grain.
Part No: 0.87 0.87 2.0
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Teak Lumber
For over three centuries Van de Stadt has been supplying timber from Zaandam in the Netherlands to the boatbuilding industry as wooden mercantile vessels of the past have transitioned to the luxury yachts of today. Van de Stadt teak is air-dried before kiln drying to ensure a pleasant, homogenous appearance to the color and grain.
Part No: 0.50 1.87 2.5
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Teak Lumber
For over three centuries Van de Stadt has been supplying timber from Zaandam in the Netherlands to the boatbuilding industry as wooden mercantile vessels of the past have transitioned to the luxury yachts of today. Van de Stadt teak is air-dried before kiln drying to ensure a pleasant, homogenous appearance to the color and grain.
Part No: 0.37 5.75 5.0
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Teak Lumber
For over three centuries Van de Stadt has been supplying timber from Zaandam in the Netherlands to the boatbuilding industry as wooden mercantile vessels of the past have transitioned to the luxury yachts of today. Van de Stadt teak is air-dried before kiln drying to ensure a pleasant, homogenous appearance to the color and grain.
Part No: 0.87 3.87 4.0
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Teak Lumber
For over three centuries Van de Stadt has been supplying timber from Zaandam in the Netherlands to the boatbuilding industry as wooden mercantile vessels of the past have transitioned to the luxury yachts of today. Van de Stadt teak is air-dried before kiln drying to ensure a pleasant, homogenous appearance to the color and grain.
Part No: 0.37 5.75 1.0
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Watertite® Epoxy Filler
Versitile compound excellent for glazing and blister repairA fast-cure, two-part epoxy compound that is also excellent for blister repair. Can be applied up to 3/4" thick without sagging. As a glazing compound, it can be spread to a smooth, thin layer. Formulation: Fast cure two-part epoxy filler Recommended Usage: Gelcoat repair, osmotic blister repair Drying: To touch - 10 to 70 min. ; Sandable - 3 to 24 hrs. ; Immersion - 2 days Color: Light Blue Quantity: 500ml (17oz. ); 1000ML (34oz.
Part No: YAV135KIT/500
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Watertite® Epoxy Filler
Versitile compound excellent for glazing and blister repairA fast-cure, two-part epoxy compound that is also excellent for blister repair. Can be applied up to 3/4" thick without sagging. As a glazing compound, it can be spread to a smooth, thin layer. Formulation: Fast cure two-part epoxy filler Recommended Usage: Gelcoat repair, osmotic blister repair Drying: To touch - 10 to 70 min. ; Sandable - 3 to 24 hrs. ; Immersion - 2 days Color: Light Blue Quantity: 500ml (17oz. ); 1000ML (34oz.
Part No: YAV135KIT/L
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->West System Application Videos & Technical Books
WEST SYSTEM® Technical Books—Guide you through a wide range of projects and repairs These books are chock-full of important of information on recommended product usage, applications, and step-by-step instructions for a wide variety of projects, including blister repair, deck reinforcement, lamination repair, closing of punctures and holes, dry rot repairs and more. Specific step-by-step instructions. Helpful illustrations.
Part No: 002
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->West System Application Videos & Technical Books
WEST SYSTEM® Technical Books—Guide you through a wide range of projects and repairs These books are chock-full of important of information on recommended product usage, applications, and step-by-step instructions for a wide variety of projects, including blister repair, deck reinforcement, lamination repair, closing of punctures and holes, dry rot repairs and more. Specific step-by-step instructions. Helpful illustrations.
Part No: 002-740
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->West System Application Videos & Technical Books
WEST SYSTEM® Technical Books—Guide you through a wide range of projects and repairs These books are chock-full of important of information on recommended product usage, applications, and step-by-step instructions for a wide variety of projects, including blister repair, deck reinforcement, lamination repair, closing of punctures and holes, dry rot repairs and more. Specific step-by-step instructions. Helpful illustrations.
Part No: 002-650
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->West System Application Videos & Technical Books
WEST SYSTEM® Technical Books—Guide you through a wide range of projects and repairs These books are chock-full of important of information on recommended product usage, applications, and step-by-step instructions for a wide variety of projects, including blister repair, deck reinforcement, lamination repair, closing of punctures and holes, dry rot repairs and more. Specific step-by-step instructions. Helpful illustrations.
Part No: 002-550
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->West System Application Videos & Technical Books
WEST SYSTEM® Technical Books—Guide you through a wide range of projects and repairs These books are chock-full of important of information on recommended product usage, applications, and step-by-step instructions for a wide variety of projects, including blister repair, deck reinforcement, lamination repair, closing of punctures and holes, dry rot repairs and more. Specific step-by-step instructions. Helpful illustrations.
Part No: 002-150
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->West System Application Videos & Technical Books
WEST SYSTEM® Technical Books—Guide you through a wide range of projects and repairs These books are chock-full of important of information on recommended product usage, applications, and step-by-step instructions for a wide variety of projects, including blister repair, deck reinforcement, lamination repair, closing of punctures and holes, dry rot repairs and more. Specific step-by-step instructions. Helpful illustrations.
Part No: 002-970
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Wood Putty
A quick and easy way to fill nicks and scratches in woodReal wood in a plastic base. Perfect for filling nicks and scratches in virtually any wood. Dries fast, sands easily and can be painted over. Dries fast.
Part No: 36041122
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape
Full face mask lens cover replacement part.
Part No: 6885
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape
These polyethylene-coated coated shoe covers provide non-slip protection on most surfaces. One size fits most shoes.
Part No: 68431
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape
Quality handle to extend your reach 60" long, one-piece wood handle with threaded end. Lacquered wood.
Part No: 36005
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape
Comfortable insurance against damaged hearingDurable plastic cups and easy headband adjustment make these protective and comfortable. 22dB noise reduction rating. Easy adjustment.
Part No: R1425ES
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape
Provides protection against certain oil and non-oil based particlesDesigned to help provide reliable worker protection against certain oil and non-oil based particles. Commonly used for sanding epoxies, gel coats and fiberglass. Pkg. of 20. Primary Usage: Nuisance level organic vapor relief (concentrations not exceeding the OSHA PEL or applicable exposure level, whichever is lower. ). Approvals: NOSH# TC-84A-1350 . Securing Device: Braided straps .
Part No: 8247
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape
Fits standard plastic insert (Model 160762).
Part No: 35001
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape
Protect your eyes—you only have one pair!Soft and comfortable, general-use goggles; not for use with chemicals.
Part No: R1620ES
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape
7500 Series Respirator Supply Kit Includes organic vapor cartridge, N95 particulate filter & filter retainer.
Part No: 37150
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape
3M replacement particulate filter retainer.
Part No: 501
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape
Shrink Tape Buckles Premium installation supply to ensure a professional shrinkwrap job from start to finish. 3/4" Buckles.
Part No: WM-075
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape
Protects against unhealthy exposure to chemicals and paintKeep paint, resins, overspray and other messy things off your head. One size fits all. Extra-long neck.
Part No: 68580
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape
Stylish safety glasses with 5-position adjustable temples. They can be used in any setting in which eye protection is required both indoors and outdoors.
Part No: R1721ES
|
|
|