Top Sellers
Calibrated Resin Pump Set from MAS EPOXY
For use with 1 quart, 1/2 gallon, 1 gallon, 4 gallon and 5 gallon size containers.
|
Cetol Marine Light - Quart from INTERLUX
Enhances and protects the natural beauty of interior and exterior woodSemi-transparent finish prevents weathering and repels water. just wash wood thoroughly and apply. Three coats are recommended for the first application, followed by annual touchups. Marine Light is more translucent than Marine. If a gloss finish is desired, either may be overcoated with Marine Gloss. Quart. Long-lasting adhesion and protection from UV rays and weathering. Flexible, breathable, translucent finish; Quarts.
|
VC-Offshore - Baltoplate Gray, Gallon from INTERLUX
Used by performance boatsVC Offshore combines superior antifouling performance with a super smooth low friction surface for the performance conscious boater. This high-strength, vinyl antifouling paint, fortified with Teflon® yields a hard, very smooth finish for maximum durability, reduced friction and increased performance. High copper loading fights fouling on performance boats in saltwater. Can be used in fresh, salt and brackish waters. Should not be applied over non-vinyl bottom paints.
|
Micron CSC Antifouling Paint, Red, Quart from INTERLUX
Haul and relaunch without loss of performance The innovative copper-copolymer formula of Micron CSC provides a controlled release of antifouling biocide at the paint surface, which means that the longevity of the coating is related to the amount of paint applied. Can be applied over most paints in good condition. Micron CSC will not lose its effectiveness when hauled out of the water for extended periods of time (such as winter storage). Type: Copolymer . 2% Cuprous Oxide . Additives: None .
|
Brightside Pre-Kote Primer - Gray, Quart from INTERLUX
Fills minor blemishes and sands easilyOne part primer for use with Brightside or any other one-part topside enamel. Microspheres provide high build and improved sandability. (Replaces Brightside Primer and 279 White Undercoater. ) Application: Brush, roller, airless/conventional spray . Number of Coats Recommended: One or two, depending on surface condition. Drying: Overcoating: 6 to 12 hrs. Drying Time: To touch: 1 to 3 hrs. Coverage: Brush: 112 sq. ft/qt, 450 sq. ft/gal; Spray: 87 sq.
|
Chris Craft Stain #573 - Pint from INTERLUX
Chris Craft Stain - Pint Fills grain while staining wood, reducing the number of coats of varnish needed. May also be used on bare mahogany planking before applying primer or sanding surfacer.
|
Adaptor Fitting for Suzuki & Honda Lower Units from WEST MARINE
Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefisher lower units Fits standard quart plastic bottles. Flexible hose gets to hard-to-reach fill plugs.
|
Fiberglass Cleaner and Wax - Quart from SEAPOWER MARINE PROD
Cleans and waxes in one easy stepCleans, waxes, seals and protects the fiberglass surface. Contains the finest Carnauba waxes and silicones and removes surface oxidation, residue, dock marks, grease and dirt while leaving behind a durable high-gloss finish. Excellent for hand or machine use. Quart.
|
Nauta 9 Gallon Flexible Fuel Tank from IMTRA CORPORATION
Flexible gasoline tanks won't rust, don't rattle, are easy to tie down, easy to carry, and won't scrape your boat. The Nauta 9-Gallon flexible fuel tank features comfortable, molded carrying handles and rugged 840-denier nylon construction. Fitted with a 1 1/2'' pivoting fill and a capped and 1/4'' NPT hose barb. Measures 28 1/2'' x 17 1/2'' x 6 1/2''.
|
Orpine Boat Soap, Quart from ORPIN
Fresh pine scent!Replaces musty mildew odors with a pleasant fresh pine scent. Just one ounce in three gallons of fresh or saltwater will clean a 45'L boat. Biodegradable. Biodegradable.
|
Teak Care - Brightener, Quart from STARBRITE
Clean, brighten and protect your teak in three easy stepsBeautiful teak in three easy steps! Kit contains three pint-sized bottles, one each of Cleaner to remove stains and weathering; Brightener to highlight the natural grain and enhance color; and Oil to seal and protect wood from weather and UV damage. Individual, quart-sized bottles are also available. Cleaner chemically roots out stains, including ugly black mildew stains. Brightener restores teak's lustrous hue.
|
Fiberglass Boat Cleaner 920 1/2 Gallon from COLLINITE
Removes rust, exhaust, oil, grease, and oxidation stains from fiberglass. Restores the original color quickly without hard rubbing or buffing, leaves a chemically clean surface to which waxes can bond. Use with fiberglass boat wax or heavy-duty paste Fleetwax . Made in U. S. A.
|
High Gloss Gelcoat Compound Gallon from 3M PRODUCTS
Leaves a high gloss finish without wheel or swirl marksRemove fine scratches from production gel coat. Unique formulation reduces slinging while buffing and leaves a high gloss finish without wheel or swirl marks. Contains no wax or silicone.
|
|
|
Star Brite Instant Hull Cleaner, Gallon from STARBRITE
Formulated extra strong to get the job doneSimply spray or wipe on. Removes scum, algae and rust stains from fiberglass, metal and painted surfaces without rubbing. Extremely strong cleaner, avoid contact with galvanized metal. Removes scum, algae and rust stains. For use on fiberglass, metal and painted surfaces. Avoid contact with galvanized metal.
|
|
Quart from INTERLUX, Gallon from INTERLUX, 06qt) from EPIFANES
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Thinners & Solvents->Lacquer Thinner
For thinning lacquer and general cleanupProvides maximum leveling and highest blush resistance when thinning nitrocellulose lacquer. Also excellent for cleanup.
Part No: CML170
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Thinners & Solvents->Lacquer Thinner
For thinning lacquer and general cleanupProvides maximum leveling and highest blush resistance when thinning nitrocellulose lacquer. Also excellent for cleanup.
Part No: QML170
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Thinners & Solvents->Methyl Ethyl Ketone Solvent
A strong cleanup solvent—very effective for epoxiesMEK has characteristics similar to acetone, but is 30% slower evaporating.
Part No: QME71
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Thinners & Solvents->Methyl Ethyl Ketone Solvent
A strong cleanup solvent—very effective for epoxiesMEK has characteristics similar to acetone, but is 30% slower evaporating.
Part No: GME71
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Thinners & Solvents->Ready-Strip® Marine Paint Stripper
An environmentally safer alternative to caustic paint removers that contain methylene chloride, Ready-Strip is formulated to remove up to five layers of marine antifouling, topside paints and varnishes in one application. The process is simplified by its blue color which turns white or light blue when paint is ready to be removed. Biodegradable, non-flammable, odor-free and it easily cleans up with water.
Part No: RM01
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Thinners & Solvents->Ready-Strip® Marine Paint Stripper
An environmentally safer alternative to caustic paint removers that contain methylene chloride, Ready-Strip is formulated to remove up to five layers of marine antifouling, topside paints and varnishes in one application. The process is simplified by its blue color which turns white or light blue when paint is ready to be removed. Biodegradable, non-flammable, odor-free and it easily cleans up with water.
Part No: RM25
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Topside Paint
A flattening agent specifically formulated for mixing with Interlux's one-part finishes, Toplac, Brightside, Yacht Enamels and varnishes (Original, Goldspar Clear and Schooner) to produce a variety of gloss, satin or matte effect finishes. For interior and exterior use.
Part No: YMA715/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Topside Paint
Water-based formula dries fast and cleans up easilyExcellent for boat interiors because it resists the effects of high humidity and dries fast. Water-based for easy application, cleanup and little odor. Can be brushed, rolled or sprayed. Quart. Base Formulation: Water-based satin interior enamel contains no mercury or lead. Recommended Application Method: Brush, roller, or spray (adheres to glossy surface with no sanding required). Number of Coats Recommended: Two. Drying Time: 50°: 4hrs.
Part No: 3121-QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Topside Paint
World renowned and the topside of choice for millions of boaters, Z*Spar Enamel is a modified long oil alkyd of exceptional all-around durability. Z*Spar Enamel is a superb finish for all topside surfaces of wood, metal or fiberglass. In general, these paints do not contain UV absorbers. They have high gloss and color retention, but not as high as polyurethanes. Easiest for the amateur to apply using a brush. More compatible with underlying surfaces than polyurethanes.
Part No: 1330308
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Topside Paint
Achieve professional-quality results with this simplified two-part painting system Simpler to use then other two-part polyurethanes, Perfection has been formulated to enable “do-it-yourselfers” to achieve professional quality results with ease on topsides, superstructure and decks. It is resistant to a wide range of chemicals, including fuels, mild acids and detergents. May be brushed, rolled, or sprayed over primed fiberglass, wood, aluminum, or steel. Number of Coats Recommended: Two/three .
Part No: YZM914KIT/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Topside Paint
Strictly for spray applicationsSpeeds up the cure process of Perfection Two-Part Polyurethane. Should only be used for spray application. Highly reactive material reduces cure time of Perfection Two-Part Polyurethane. Decreases pot life (working life) of Perfection.
Part No: YQA100/250
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Topside Paint->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4258/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Topside Paint->Premium Yacht Enamel
Traditional alkyd-based enamel applies easily by brush or sprayA fast-drying, high-quality alkyd-based enamel for use above the waterline. Good hiding characteristics and excellent gloss retention. Easy application by brush or spray with good flow and self-leveling ability. Base Formulation: One-part alkyd enamel . Recommended Application Method: Brush, roller, airless/conventional spray . Number of Coats Recommended: Two . Primer Needed: Prekote 4279 . Drying Time: To touch: 1 to 3 hrs.
Part No: Y1/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Topside Paint->Premium Yacht Enamel
Traditional alkyd-based enamel applies easily by brush or sprayA fast-drying, high-quality alkyd-based enamel for use above the waterline. Good hiding characteristics and excellent gloss retention. Easy application by brush or spray with good flow and self-leveling ability. Base Formulation: One-part alkyd enamel . Recommended Application Method: Brush, roller, airless/conventional spray . Number of Coats Recommended: Two . Primer Needed: Prekote 4279 . Drying Time: To touch: 1 to 3 hrs.
Part No: Y108/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Topside Paint->Premium Yacht Enamel
Traditional alkyd-based enamel applies easily by brush or sprayA fast-drying, high-quality alkyd-based enamel for use above the waterline. Good hiding characteristics and excellent gloss retention. Easy application by brush or spray with good flow and self-leveling ability. Base Formulation: One-part alkyd enamel . Recommended Application Method: Brush, roller, airless/conventional spray . Number of Coats Recommended: Two . Primer Needed: Prekote 4279 . Drying Time: To touch: 1 to 3 hrs.
Part No: Y220/1
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Topside Paint->Premium Yacht Enamel
Traditional alkyd-based enamel applies easily by brush or sprayA fast-drying, high-quality alkyd-based enamel for use above the waterline. Good hiding characteristics and excellent gloss retention. Easy application by brush or spray with good flow and self-leveling ability. Base Formulation: One-part alkyd enamel . Recommended Application Method: Brush, roller, airless/conventional spray . Number of Coats Recommended: Two . Primer Needed: Prekote 4279 . Drying Time: To touch: 1 to 3 hrs.
Part No: Y1/1
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Topside Paint->Premium Yacht Enamel
Traditional alkyd-based enamel applies easily by brush or sprayA fast-drying, high-quality alkyd-based enamel for use above the waterline. Good hiding characteristics and excellent gloss retention. Easy application by brush or spray with good flow and self-leveling ability. Base Formulation: One-part alkyd enamel . Recommended Application Method: Brush, roller, airless/conventional spray . Number of Coats Recommended: Two . Primer Needed: Prekote 4279 . Drying Time: To touch: 1 to 3 hrs.
Part No: Y220/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Topside Paint->Soy Stripper
Enjoy easy removal of multiple layers of topside and bottom paint with this, environmentally-friendly, soy-based product. It's easy to use. Just brush it on, allow it to work, then remove the paint with a putty knife or pressure washer. Features a gel formula that sticks to vertical surfaces.
Part No: 892261000505
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Topside Paint->Soy Stripper
Enjoy easy removal of multiple layers of topside and bottom paint with this, environmentally-friendly, soy-based product. It's easy to use. Just brush it on, allow it to work, then remove the paint with a putty knife or pressure washer. Features a gel formula that sticks to vertical surfaces.
Part No: 892261000536
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Topside Paint->U-1001C Top Coat Spray Catalyst
Spray catalyst for gloss topcoats.
Part No: U-1001C QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Topside Paint->U-2964 Brushing Catalyst
U-2964 brushing catalyst for gloss topcoats.
Part No: U-2964 1/2GAL
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Topside Paint->U-2964 Brushing Catalyst
U-2964 brushing catalyst for gloss topcoats.
Part No: U-2964 PT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Topside Paint->U-2964 Brushing Catalyst
U-2964 brushing catalyst for gloss topcoats.
Part No: U-2964 QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Topside Paint->Universal Enamels Spray Paint
For application on diverse surfaces including fiberglass, wood, plastic, metal—even vinyl! These enamels are rust, fade, chip and chemical resistant and remain flexibile in extreme conditions. Ergonomic bottle with trigger actuation eliminates drips and finger fatigue. New misting system minimizes overspray and permits spraying from any angle—even upside down! Colors (except Flat Black) dry to a gloss finish. 12oz.
Part No: 245216
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Varnishes->1015 Captain's Varnish
Easy-to-apply, traditional, amber-colored varnishCaptain’s varnish is recommended for the highest quality work. It has outstanding gloss retention, is extremely durable and contains a UV shield. Not for use below the waterline. Recommended Usage: Exterior or interior, above water . Formulation: Traditional alkyd, 48% solids . Additives: UV inhibitors . Drying Time: To touch: 2 hrs. ; overcoat: 12 hrs. Number of Coats Recommended: Previously varnished: 2 coats; bare wood: 4 or more coats .
Part No: V1015-QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Varnishes->1015 Captain's Varnish
Easy-to-apply, traditional, amber-colored varnishCaptain’s varnish is recommended for the highest quality work. It has outstanding gloss retention, is extremely durable and contains a UV shield. Not for use below the waterline. Recommended Usage: Exterior or interior, above water . Formulation: Traditional alkyd, 48% solids . Additives: UV inhibitors . Drying Time: To touch: 2 hrs. ; overcoat: 12 hrs. Number of Coats Recommended: Previously varnished: 2 coats; bare wood: 4 or more coats .
Part No: V1015-GA
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Varnishes->1015 Captain's Varnish
Easy-to-apply, traditional, amber-colored varnishCaptain’s varnish is recommended for the highest quality work. It has outstanding gloss retention, is extremely durable and contains a UV shield. Not for use below the waterline. Recommended Usage: Exterior or interior, above water . Formulation: Traditional alkyd, 48% solids . Additives: UV inhibitors . Drying Time: To touch: 2 hrs. ; overcoat: 12 hrs. Number of Coats Recommended: Previously varnished: 2 coats; bare wood: 4 or more coats .
Part No: V1015-PT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Clear High-Gloss Varnish
This trusted varnish produces beautiful results! Formulated with a high solids content of Chinese tung oil, combined with non-yellowing, modified alkyd resins and blended with a perfect balance of UV absorbers. It provides high build and superior gloss, flow and durability. Excellent flexibility and water resistance in all climates. Recommended Usage: Exterior or interior, above water . Additives: UV inhibitors . Application Methods: Brush, roll or spray . ; overcoat: 24 hrs. @ 65°F 65%RH .
Part No: CV.1000
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Varnishes->Clear High-Gloss Varnish
This trusted varnish produces beautiful results! Formulated with a high solids content of Chinese tung oil, combined with non-yellowing, modified alkyd resins and blended with a perfect balance of UV absorbers. It provides high build and superior gloss, flow and durability. Excellent flexibility and water resistance in all climates. Recommended Usage: Exterior or interior, above water . Additives: UV inhibitors . Application Methods: Brush, roll or spray . ; overcoat: 24 hrs. @ 65°F 65%RH .
Part No: CV.500
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Woodcare Kits, Misc.->Paste Wood Filler/Stain
Color stains the wood while it fills the pores in open-grained mahogany. One gallon covers about 400sq. ft.
Part No: 1082-PT
|
|
|