Top Sellers
Calibrated Resin Pump Set from MAS EPOXY
For use with 1 quart, 1/2 gallon, 1 gallon, 4 gallon and 5 gallon size containers.
|
TastePURE™ Spring Fresh Water System Treatment from CAMCO PRODUCTS
Clean and deodorize boat and RV fresh water systems with this safe, biodegradable formula. Dewinterize freshwater tank and lines. Good for periodic cleaning, freshening and deodorizing. One step, no-measure solution requires no mixing or preparation. One gallon cleans up to a 100 gallon tank.
|
|
|
Hullgard Primer Converter, Qt. from AWLGRIP
Hullgard Epoxy Primer is a holding primer that combines excellent anticorrosion and water barrier properties with anti-fouling tie-coat functionality. Suitable for below the waterline only, it offers a long overcoating interval without sanding to reduce work time along with superb adhesion to properly prepared fiberglass, steel, aluminum and wood. Can be recoated as soon as the solvents evaporate, even at low temperatures. 1 Gal. Theoretical Coverage – 140 Sq. 5 mils/135 microns DFT or 360 Sq.
|
Nauta 9 Gallon Flexible Fuel Tank from IMTRA CORPORATION
Flexible gasoline tanks won't rust, don't rattle, are easy to tie down, easy to carry, and won't scrape your boat. The Nauta 9-Gallon flexible fuel tank features comfortable, molded carrying handles and rugged 840-denier nylon construction. Fitted with a 1 1/2'' pivoting fill and a capped and 1/4'' NPT hose barb. Measures 28 1/2'' x 17 1/2'' x 6 1/2''.
|
LP Enamel - Hatteras White, Quart from STERLING
A popular choice among many boatyard professionals as well as do-it-yourself boat owners who want superb gloss and durability. Pros spray it, yet the Sterling Brushing System captures the same look, thanks to its unique flow properties. Sterling brushing system: Pick a color base, mix 2:1 with U-2964. Add a dash of U-2900 accelerator in cool weather. Thin about 25% with U-2965. Apply on nonskid surfaces with low-nap foam rollers and tip several times. Apply with premium China bristle brush.
|
Orpine Boat Soap, Quart from ORPIN
Fresh pine scent!Replaces musty mildew odors with a pleasant fresh pine scent. Just one ounce in three gallons of fresh or saltwater will clean a 45'L boat. Biodegradable. Biodegradable.
|
Fiberglass Boat Cleaner 920 1/2 Gallon from COLLINITE
Removes rust, exhaust, oil, grease, and oxidation stains from fiberglass. Restores the original color quickly without hard rubbing or buffing, leaves a chemically clean surface to which waxes can bond. Use with fiberglass boat wax or heavy-duty paste Fleetwax . Made in U. S. A.
|
High Gloss Gelcoat Compound Gallon from 3M PRODUCTS
Leaves a high gloss finish without wheel or swirl marksRemove fine scratches from production gel coat. Unique formulation reduces slinging while buffing and leaves a high gloss finish without wheel or swirl marks. Contains no wax or silicone.
|
|
|
|
|
Adaptor Fitting for Suzuki & Honda Lower Units from WEST MARINE
Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefisher lower units Fits standard quart plastic bottles. Flexible hose gets to hard-to-reach fill plugs.
|
Star Brite Instant Hull Cleaner, Gallon from STARBRITE
Formulated extra strong to get the job doneSimply spray or wipe on. Removes scum, algae and rust stains from fiberglass, metal and painted surfaces without rubbing. Extremely strong cleaner, avoid contact with galvanized metal. Removes scum, algae and rust stains. For use on fiberglass, metal and painted surfaces. Avoid contact with galvanized metal.
|
Premium 4-Cycle Heavy-Duty SAE 15W40 Engine Oil, Gallon from WEST MARINE
An excellent choice for all 4-cycle inboard diesel and gasoline engines operating in all conditions. Clean-burning formula meets or exceeds both industry and factory performance specifications. Powerful additives allow for dependable engine service.
|
On & Off Hull/Bottom Cleaner - Gallon from MARYKATE
Powerful cleaner removes marine growth from hull Removes waterline, algae, rust and scum. Won't harm fiberglass. Brush-on/rinse-off, biodegradable formula.
|
|
from AWLGRIP, Gallon from AWLGRIP, Quart from AWLGRIP, Gallon from STERLING
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->2-Part Linear Polyurethane Enamel
A popular choice among many boatyard professionals as well as do-it-yourself boat owners who want superb gloss and durability. Pros spray it, yet the Sterling Brushing System captures the same look, thanks to its unique flow properties. Sterling brushing system: Pick a color base, mix 2:1 with U-2964. Add a dash of U-2900 accelerator in cool weather. Thin about 25% with U-2965. Apply on nonskid surfaces with low-nap foam rollers and tip several times. Apply with premium China bristle brush.
Part No: U-1003 GAL
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->2015 Flagship Varnish
Offers the highest UV protection availableSimilar characteristics to the super-popular Captain’s varnish, but it offers the highest UV protection available. It can be built up to many coats for a deep, mirror-like finish. Not for use below the waterline. Recommended Usage: Exterior or interior, above water . Formulation: Traditional alkyd, 48% solids . Application Method(s): Brush or spray (thin 20% for spraying) . Drying Time: To touch: 2 hrs at 70°; overcoat: 18 hrs. Color: Light amber .
Part No: 8720106
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->2015 Flagship Varnish
Offers the highest UV protection availableSimilar characteristics to the super-popular Captain’s varnish, but it offers the highest UV protection available. It can be built up to many coats for a deep, mirror-like finish. Not for use below the waterline. Recommended Usage: Exterior or interior, above water . Formulation: Traditional alkyd, 48% solids . Application Method(s): Brush or spray (thin 20% for spraying) . Drying Time: To touch: 2 hrs at 70°; overcoat: 18 hrs. Color: Light amber .
Part No: 2015-QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->2018 Clear Sealer
For sealing non-oily wood before overcoatingPhenolic resin-based sealer for priming bare wood. Recommended Usage: Priming bare wood before painting (not for teak or other oily woods) . Formulation: Clear phenolic resin based sealer . Recommended Usage: Priming bare wood before painting (not for teak or other oily woods) Formulation: Clear phenolic resin based sealer Application Method(s): Brush (temperature 20°F or higher) . Drying Time: To recoat: 4 hrs (sanding required) . Coverage: 150sq.
Part No: 2018-QT
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->2018 Clear Sealer
For sealing non-oily wood before overcoatingPhenolic resin-based sealer for priming bare wood. Recommended Usage: Priming bare wood before painting (not for teak or other oily woods) . Formulation: Clear phenolic resin based sealer . Recommended Usage: Priming bare wood before painting (not for teak or other oily woods) Formulation: Clear phenolic resin based sealer Application Method(s): Brush (temperature 20°F or higher) . Drying Time: To recoat: 4 hrs (sanding required) . Coverage: 150sq.
Part No: 1201806
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Thinners & Solvents->202 Fiberglass Solvent Wash
Essential for use prior to painting bare fiberglass gel coats regardless of their age. A combination of several solvents, some of which evaporate slowly to hold contaminants in suspension so they can be wiped from the surface before the solvent dries. Removes mold release agents, wax, oil and grease.
Part No: Y202/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->545 Anti-Corrosive Epoxy Primer, (Professional Application Only)
For steel, aluminum, wood or fiberglass. Spray, brush, roll on. Covers up to 497 sq. ft. /gal. Recoat in 12 hours. NOTE: Awlgrip is intended for professional application only and is not available for sale to retail customers.
Part No: OD3001/1QTUS
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->545 Anti-Corrosive Epoxy Primer, (Professional Application Only)
For steel, aluminum, wood or fiberglass. Spray, brush, roll on. Covers up to 497 sq. ft. /gal. Recoat in 12 hours. NOTE: Awlgrip is intended for professional application only and is not available for sale to retail customers.
Part No: OD3001/1GLUS
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->545 Anti-Corrosive Epoxy Primer, (Professional Application Only)
For steel, aluminum, wood or fiberglass. Spray, brush, roll on. Covers up to 497 sq. ft. /gal. Recoat in 12 hours. NOTE: Awlgrip is intended for professional application only and is not available for sale to retail customers.
Part No: OD8001/1QTUS
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->545 Anti-Corrosive Epoxy Primer, (Professional Application Only)
For steel, aluminum, wood or fiberglass. Spray, brush, roll on. Covers up to 497 sq. ft. /gal. Recoat in 12 hours. NOTE: Awlgrip is intended for professional application only and is not available for sale to retail customers.
Part No: OD8001/1GLUS
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->545 Anti-Corrosive Epoxy Primer, (Professional Application Only)
For steel, aluminum, wood or fiberglass. Spray, brush, roll on. Covers up to 497 sq. ft. /gal. Recoat in 12 hours. NOTE: Awlgrip is intended for professional application only and is not available for sale to retail customers.
Part No: OD1001/1QTUS
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->6149 Easypoxy White Undercoater
Use to fill small surface blemishes and imperfectionsUse as a base coat for Easypoxy enamels when the surface is less than smooth. Can be applied to fiberglass, wood and previously painted surfaces. Dries quickly. Easy to sand. Formulation: One-part high-build primer. Number of Coats Recommended: One or more, depending on surface condition. Drying Time: To recoat: 2 to 16 hrs. Coverage: 100 sq. ft/qt, 400 sq. ft/gal. .
Part No: 1614906
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->6980 Rustlok Steel Primer
Easy-to-apply, effective, anti-corrosive barrierOne-part, moisture-cured polyurethane coating locks in and stops the spread of rust on steel, galvanized and stainless steel and cast iron. Forms a dense, waterproof barrier for maximum corrosion resistance. Primary Usage: Trailers and other ferrous metal parts . Applies Over: Steel, cast iron, galvanized and stainless steel . Drying Time: 30 min. Number of Coats Recommended: Three coats minimum . Thinner: 120, Model 249961 . Coverage: 87 sq.
Part No: 6980-GA
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->94U-1000 Low VOC Primer
Part of Sterling's Linear Polyurethane SystemUnlike U-1000, its predecessor, this white primer is higher in solids, covers better, requires fewer coats and shrinks less. Best primer for brush application. Finish sand with 220 grit for a fine topcoat finish. Use full strength for brushing or thin material with U-2965 if needed. Formulation: Two-part polyurethane sanding finish surfacer, 2:1 mix ratio . Applies Over: Gel coat, existing finishes, plastics, composites, high-build epoxy primers .
Part No: 94U-1000 GA
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->94U-1000 Low VOC Primer
Part of Sterling's Linear Polyurethane SystemUnlike U-1000, its predecessor, this white primer is higher in solids, covers better, requires fewer coats and shrinks less. Best primer for brush application. Finish sand with 220 grit for a fine topcoat finish. Use full strength for brushing or thin material with U-2965 if needed. Formulation: Two-part polyurethane sanding finish surfacer, 2:1 mix ratio . Applies Over: Gel coat, existing finishes, plastics, composites, high-build epoxy primers .
Part No: 94U-1000 QT
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->94U-1000C Catalyst
Mix 94U-1000C catalyst with the 94U-1000 Low VOC White Primer and apply immediately as no pre-reaction time is needed. 94U-1000C catalyst only Mix 2:1 primer with catalyst.
Part No: 94U-1000C PT
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->94U-1000C Catalyst
Mix 94U-1000C catalyst with the 94U-1000 Low VOC White Primer and apply immediately as no pre-reaction time is needed. 94U-1000C catalyst only Mix 2:1 primer with catalyst.
Part No: 94U-1000C HG
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->94U-1000C Catalyst
Mix 94U-1000C catalyst with the 94U-1000 Low VOC White Primer and apply immediately as no pre-reaction time is needed. 94U-1000C catalyst only Mix 2:1 primer with catalyst.
Part No: 94U-1000C QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Adjustable Wrenches
Manufactured to ANSI standards, wrenches are drop-forged chrome-vanadium steel with a wide I-beam handle design. Each includes SAE and metric markings. Jaw capacities are 3/4" (6" model) and 1 1/4" (10" model).
Part No: 15010
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Adjustable Wrenches
Manufactured to ANSI standards, wrenches are drop-forged chrome-vanadium steel with a wide I-beam handle design. Each includes SAE and metric markings. Jaw capacities are 3/4" (6" model) and 1 1/4" (10" model).
Part No: 15006
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Alodine 1201 Primer (Professional Application Only)
Gold, chromic acid conversion coating for aluminum prevents corrosion.
Part No: 73003/1GLUS
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Alodine 1201 Primer (Professional Application Only)
Gold, chromic acid conversion coating for aluminum prevents corrosion.
Part No: O73003/1QTUS
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Alumaspray Plus
It is safe for use on aluminum outdrives and outboard motors. Resists slime and other marine growth and cleans itself by washing away at a controlled rate when in contact with water. Type: Ablative aerosol; for outdrives and underwater metals. Recommended Usage: Fresh, salt, brackish water; trailerable, dry-stored boats, aluminum lower units on outdrives, outboards. Biocide: Zinc Pyrithione. Number of Coats Recommended: Two over properly-primed metal . sq. to recoat; 16hrs to launch @70°F.
Part No: 1186320
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Awl-Fair Fairing Compound (Professional Application Only)
Awlfair L. W. is a premium, epoxy trowelable fairing compound used for fairing, levelling and smoothing surface imperfections, caused by gauges, pitting, dents or weld seams. For use above and below the waterline. Super smooth finish and easy sanding. Requires less working time.
Part No: OD7007/1QTUS
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Awl-Fair Fairing Compound (Professional Application Only)
Awlfair L. W. is a premium, epoxy trowelable fairing compound used for fairing, levelling and smoothing surface imperfections, caused by gauges, pitting, dents or weld seams. For use above and below the waterline. Super smooth finish and easy sanding. Requires less working time.
Part No: OD8020/1GLUS
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Awl-Fair Fairing Compound (Professional Application Only)
Awlfair L. W. is a premium, epoxy trowelable fairing compound used for fairing, levelling and smoothing surface imperfections, caused by gauges, pitting, dents or weld seams. For use above and below the waterline. Super smooth finish and easy sanding. Requires less working time.
Part No: OD7007/1GLUS
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Awl-Fair Fairing Compound (Professional Application Only)
Awlfair L. W. is a premium, epoxy trowelable fairing compound used for fairing, levelling and smoothing surface imperfections, caused by gauges, pitting, dents or weld seams. For use above and below the waterline. Super smooth finish and easy sanding. Requires less working time.
Part No: OD8200/1QTUS
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Awl-Fair Fairing Compound (Professional Application Only)
Awlfair L. W. is a premium, epoxy trowelable fairing compound used for fairing, levelling and smoothing surface imperfections, caused by gauges, pitting, dents or weld seams. For use above and below the waterline. Super smooth finish and easy sanding. Requires less working time.
Part No: OD7200/2GLUS
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Awl-Fair Fairing Compound (Professional Application Only)
Awlfair L. W. is a premium, epoxy trowelable fairing compound used for fairing, levelling and smoothing surface imperfections, caused by gauges, pitting, dents or weld seams. For use above and below the waterline. Super smooth finish and easy sanding. Requires less working time.
Part No: OD8200/2GLUS
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Awlcraft 2000 (Professional Application Only)
This two-component, fast-drying urethane coating provides a long-lasting, buffable finish with excellent gloss and color retention. Do not use below the waterline.
Part No: F8063/1QTUS
|
|
|
