Top Sellers
Calibrated Resin Pump Set from MAS EPOXY
For use with 1 quart, 1/2 gallon, 1 gallon, 4 gallon and 5 gallon size containers.
|
VC-Offshore - Baltoplate Gray, Gallon from INTERLUX
Used by performance boatsVC Offshore combines superior antifouling performance with a super smooth low friction surface for the performance conscious boater. This high-strength, vinyl antifouling paint, fortified with Teflon® yields a hard, very smooth finish for maximum durability, reduced friction and increased performance. High copper loading fights fouling on performance boats in saltwater. Can be used in fresh, salt and brackish waters. Should not be applied over non-vinyl bottom paints.
|
Cetol Marine Light - Quart from INTERLUX
Enhances and protects the natural beauty of interior and exterior woodSemi-transparent finish prevents weathering and repels water. just wash wood thoroughly and apply. Three coats are recommended for the first application, followed by annual touchups. Marine Light is more translucent than Marine. If a gloss finish is desired, either may be overcoated with Marine Gloss. Quart. Long-lasting adhesion and protection from UV rays and weathering. Flexible, breathable, translucent finish; Quarts.
|
Micron CSC Antifouling Paint, Red, Quart from INTERLUX
Haul and relaunch without loss of performance The innovative copper-copolymer formula of Micron CSC provides a controlled release of antifouling biocide at the paint surface, which means that the longevity of the coating is related to the amount of paint applied. Can be applied over most paints in good condition. Micron CSC will not lose its effectiveness when hauled out of the water for extended periods of time (such as winter storage). Type: Copolymer . 2% Cuprous Oxide . Additives: None .
|
Adaptor Fitting for Suzuki & Honda Lower Units from WEST MARINE
Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefisher lower units Fits standard quart plastic bottles. Flexible hose gets to hard-to-reach fill plugs.
|
Fiberglass Cleaner and Wax - Quart from SEAPOWER MARINE PROD
Cleans and waxes in one easy stepCleans, waxes, seals and protects the fiberglass surface. Contains the finest Carnauba waxes and silicones and removes surface oxidation, residue, dock marks, grease and dirt while leaving behind a durable high-gloss finish. Excellent for hand or machine use. Quart.
|
Inflatable Boat Antifouling Paint from PETTIT
Water-based, multi-season ablative antifouling paint. For hard- or soft-bottom inflatables. Cleans up with water. Black. Quart. Type: Copolymer Ablative. Recommended Usage: PVC or Hypalon; trailered boats. Biocide: CuOx 41%. Additives: No. Compatibility: With all other antifouling paints in good condition except VC-17. Number of Coats Recommended: Two.
|
Teak Care - Brightener, Quart from STARBRITE
Clean, brighten and protect your teak in three easy stepsBeautiful teak in three easy steps! Kit contains three pint-sized bottles, one each of Cleaner to remove stains and weathering; Brightener to highlight the natural grain and enhance color; and Oil to seal and protect wood from weather and UV damage. Individual, quart-sized bottles are also available. Cleaner chemically roots out stains, including ugly black mildew stains. Brightener restores teak's lustrous hue.
|
Chris Craft Stain #573 - Pint from INTERLUX
Chris Craft Stain - Pint Fills grain while staining wood, reducing the number of coats of varnish needed. May also be used on bare mahogany planking before applying primer or sanding surfacer.
|
Orpine Boat Soap, Quart from ORPIN
Fresh pine scent!Replaces musty mildew odors with a pleasant fresh pine scent. Just one ounce in three gallons of fresh or saltwater will clean a 45'L boat. Biodegradable. Biodegradable.
|
Marine Structural Filler - Quart from WEST MARINE
Great for fiberglass and sheet metal ding repairsFiberglass filler with long strand reinforcing fibers for fiberglass and sheet metal repairs. Water-resistant. Hardener included. Great for quick and easy ding repair on fibergalss surfboards, sailboards, canoes and runabouts. Formulation: Polyester putty . Recommended Usage: Fiberglass and sheet metal repairs . Color: White.
|
Methyl Ethyl Ketone Solvent - Quart from KLEAN STRIP
A strong cleanup solvent—very effective for epoxiesMEK has characteristics similar to acetone, but is 30% slower evaporating.
|
Cleaner & Wax - Quart from 3M PRODUCTS
One-step processDesigned to remove light-to-medium oxidation, clean, polish and protect fiberglass gel coat and marine topside paints. A unique liquid formulation combines a compound with a special blend of waxes which restore shine and protect in one application.
|
711-M28 Marine Sanitation System from SEALAND
Marine Traveler Head Complete sanitation system in one self-contained package. China bowl provides the comforts of home. Freshwater operation and Teflon seal reduce odors. Efficient unit uses less than one quart of water per flush. Water level and flushing action controlled by a single foot pedal. One-piece holding tank has 9.
|
Amazing Roll Off All Purpose Cleaner, Quart from BELL CHEMICAL CORP.
Amazing Roll Off, All Purpose Cleaner Amazing Roll Off cleans dirt that other cleaners can't touch and rolls off with little or no rubbing. Inhibits rust and leaves a wax-like finish that resists dirt . A non-acid product that is biodegradable and environmentally safe.
|
|
Quart from INTERLUX, Quart from PETTIT, Gallon from INTERLUX
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4207/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4218/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4360/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4351/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4253/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4359/1
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4250/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4247/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4250/QTCA
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside Pre-Kote Primer
Fills minor blemishes and sands easilyOne part primer for use with Brightside or any other one-part topside enamel. Microspheres provide high build and improved sandability. (Replaces Brightside Primer and 279 White Undercoater. ) Application: Brush, roller, airless/conventional spray . Number of Coats Recommended: One or two, depending on surface condition. Drying: Overcoating: 6 to 12 hrs. Drying Time: To touch: 1 to 3 hrs. Coverage: Brush: 112 sq. ft/qt, 450 sq. ft/gal; Spray: 87 sq.
Part No: Y4279/1
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside Pre-Kote Primer
Fills minor blemishes and sands easilyOne part primer for use with Brightside or any other one-part topside enamel. Microspheres provide high build and improved sandability. (Replaces Brightside Primer and 279 White Undercoater. ) Application: Brush, roller, airless/conventional spray . Number of Coats Recommended: One or two, depending on surface condition. Drying: Overcoating: 6 to 12 hrs. Drying Time: To touch: 1 to 3 hrs. Coverage: Brush: 112 sq. ft/qt, 450 sq. ft/gal; Spray: 87 sq.
Part No: Y4279/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside Pre-Kote Primer
Fills minor blemishes and sands easilyOne part primer for use with Brightside or any other one-part topside enamel. Microspheres provide high build and improved sandability. (Replaces Brightside Primer and 279 White Undercoater. ) Application: Brush, roller, airless/conventional spray . Number of Coats Recommended: One or two, depending on surface condition. Drying: Overcoating: 6 to 12 hrs. Drying Time: To touch: 1 to 3 hrs. Coverage: Brush: 112 sq. ft/qt, 450 sq. ft/gal; Spray: 87 sq.
Part No: Y4280/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside® Striping Enamels with Teflon®
Durable coating resists abrasionA high-quality polyurethane finish that has been formulated for application to boottops and accent stripes. Excellent abrasion resistance and durability and ideal for use above the waterline. Contains Teflon® for easy cleaning, reduced waterline staining and added abrasion resistance. 1/2 Pint. Application: Brush, roller, conventional/airless spray. Number of Coats Recommended: Two coats minimum. Drying Time: To touch - 1 to 3 hrs. ; To recoat - 8 to 16 hrs.
Part No: Y4258/HP
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside® Striping Enamels with Teflon®
Durable coating resists abrasionA high-quality polyurethane finish that has been formulated for application to boottops and accent stripes. Excellent abrasion resistance and durability and ideal for use above the waterline. Contains Teflon® for easy cleaning, reduced waterline staining and added abrasion resistance. 1/2 Pint. Application: Brush, roller, conventional/airless spray. Number of Coats Recommended: Two coats minimum. Drying Time: To touch - 1 to 3 hrs. ; To recoat - 8 to 16 hrs.
Part No: Y4359/HP
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside® Striping Enamels with Teflon®
Durable coating resists abrasionA high-quality polyurethane finish that has been formulated for application to boottops and accent stripes. Excellent abrasion resistance and durability and ideal for use above the waterline. Contains Teflon® for easy cleaning, reduced waterline staining and added abrasion resistance. 1/2 Pint. Application: Brush, roller, conventional/airless spray. Number of Coats Recommended: Two coats minimum. Drying Time: To touch - 1 to 3 hrs. ; To recoat - 8 to 16 hrs.
Part No: Y4990/HP
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside® Striping Enamels with Teflon®
Durable coating resists abrasionA high-quality polyurethane finish that has been formulated for application to boottops and accent stripes. Excellent abrasion resistance and durability and ideal for use above the waterline. Contains Teflon® for easy cleaning, reduced waterline staining and added abrasion resistance. 1/2 Pint. Application: Brush, roller, conventional/airless spray. Number of Coats Recommended: Two coats minimum. Drying Time: To touch - 1 to 3 hrs. ; To recoat - 8 to 16 hrs.
Part No: Y4248/HP
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->C-8761 M.E.K. Solvent
For use with gloss topcoats in very cold weather and brush cleaning.
Part No: C-8761 GAL
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Copper Bronze Specialty Bottom Paint
Mail-In Rebate Download Rebate Form (PDF) A traditional favorite Modified epoxy antifouling with an attractive, traditional bronze finish. Great for classic runabouts. 33. 2% cuprous oxide provides resistance to algae, barnacles, grass and zebra mussels. Bronze color. Type: Modified epoxy . Recommended Usage: Low to moderate fouling areas; year-round immersion; fiberglass, wood and steel hulls . Biocide: Cuprous oxide. Additives: None. Number of Coats Recommended: Two . Coverage: 100sq.
Part No: 1933-QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Copper Bronze Specialty Bottom Paint
Mail-In Rebate Download Rebate Form (PDF) A traditional favorite Modified epoxy antifouling with an attractive, traditional bronze finish. Great for classic runabouts. 33. 2% cuprous oxide provides resistance to algae, barnacles, grass and zebra mussels. Bronze color. Type: Modified epoxy . Recommended Usage: Low to moderate fouling areas; year-round immersion; fiberglass, wood and steel hulls . Biocide: Cuprous oxide. Additives: None. Number of Coats Recommended: Two . Coverage: 100sq.
Part No: 1933-GA
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Bottom Paint & Coatings->CPP Plus Antifouling Paint
Mail-In Rebate - View Details Download Rebate Form (PDF) Growth-free protection with minimal paint build-up! CPP Plus is an affordable self-polishing ablative paint. This “self-polishing” paint releases new biocide as the boat moves through the water and combines excellent protection with minimal paint build-up. Can be used in fresh or salt water. Not available in Canada or California .
Part No: 411128006
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->CPP Plus Antifouling Paint
Growth-free protection with minimal paint build-up! CPP Plus is an affordable self-polishing ablative paint. This “self-polishing” paint releases new biocide as the boat moves through the water and combines excellent protection with minimal paint build-up. Can be used in fresh or salt water. Not available in Canada or California .
Part No: 411168006
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->CPP Plus Antifouling Paint
Growth-free protection with minimal paint build-up! CPP Plus is an affordable self-polishing ablative paint. This “self-polishing” paint releases new biocide as the boat moves through the water and combines excellent protection with minimal paint build-up. Can be used in fresh or salt water. Not available in Canada or California .
Part No: 411188006
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Easypoxy 1-Part Polyurethane Enamel
Flows on easily and gives the glossy appearance of being sprayedA one-part blend of urethane, silicone and alkyd products. Even brushed or rolled, it gives the high gloss appearance of being sprayed on. For best results, prime surface with Easypoxy White Undercoater. Great for fiberglass, wood or metal. Base Formulation: One-part polyurethane/silicone modified alkyd enamel . Recommended Application Method: Brush, roller, conventional/airless spray. Number of Coats Recommended: Two or more .
Part No: 3248-QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Easypoxy 1-Part Polyurethane Enamel
Flows on easily and gives the glossy appearance of being sprayedA one-part blend of urethane, silicone and alkyd products. Even brushed or rolled, it gives the high gloss appearance of being sprayed on. For best results, prime surface with Easypoxy White Undercoater. Great for fiberglass, wood or metal. Base Formulation: One-part polyurethane/silicone modified alkyd enamel . Recommended Application Method: Brush, roller, conventional/airless spray. Number of Coats Recommended: Two or more .
Part No: 3520-QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Easypoxy 1-Part Polyurethane Enamel
.
Part No: 3706-QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Easypoxy 1-Part Polyurethane Enamel
Flows on easily and gives the glossy appearance of being sprayedA one-part blend of urethane, silicone and alkyd products. Even brushed or rolled, it gives the high gloss appearance of being sprayed on. For best results, prime surface with Easypoxy White Undercoater. Great for fiberglass, wood or metal. Base Formulation: One-part polyurethane/silicone modified alkyd enamel . Recommended Application Method: Brush, roller, conventional/airless spray. Number of Coats Recommended: Two or more .
Part No: 1323708
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Easypoxy 1-Part Polyurethane Enamel
.
Part No: 1310806
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Easypoxy 1-Part Polyurethane Enamel
.
Part No: 3213-QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Easypoxy 1-Part Polyurethane Enamel
Flows on easily and gives the glossy appearance of being sprayedA one-part blend of urethane, silicone and alkyd products. Even brushed or rolled, it gives the high gloss appearance of being sprayed on. For best results, prime surface with Easypoxy White Undercoater. Great for fiberglass, wood or metal. Base Formulation: One-part polyurethane/silicone modified alkyd enamel . Recommended Application Method: Brush, roller, conventional/airless spray. Number of Coats Recommended: Two or more .
Part No: 3711-QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Easypoxy 1-Part Polyurethane Enamel
.
Part No: 3175-QT
|
|
|