Top Sellers
Calibrated Resin Pump Set from MAS EPOXY
For use with 1 quart, 1/2 gallon, 1 gallon, 4 gallon and 5 gallon size containers.
|
TastePURE™ Spring Fresh Water System Treatment from CAMCO PRODUCTS
Clean and deodorize boat and RV fresh water systems with this safe, biodegradable formula. Dewinterize freshwater tank and lines. Good for periodic cleaning, freshening and deodorizing. One step, no-measure solution requires no mixing or preparation. One gallon cleans up to a 100 gallon tank.
|
Hullgard Primer Converter, Qt. from AWLGRIP
Hullgard Epoxy Primer is a holding primer that combines excellent anticorrosion and water barrier properties with anti-fouling tie-coat functionality. Suitable for below the waterline only, it offers a long overcoating interval without sanding to reduce work time along with superb adhesion to properly prepared fiberglass, steel, aluminum and wood. Can be recoated as soon as the solvents evaporate, even at low temperatures. 1 Gal. Theoretical Coverage – 140 Sq. 5 mils/135 microns DFT or 360 Sq.
|
LP Enamel - Hatteras White, Quart from STERLING
A popular choice among many boatyard professionals as well as do-it-yourself boat owners who want superb gloss and durability. Pros spray it, yet the Sterling Brushing System captures the same look, thanks to its unique flow properties. Sterling brushing system: Pick a color base, mix 2:1 with U-2964. Add a dash of U-2900 accelerator in cool weather. Thin about 25% with U-2965. Apply on nonskid surfaces with low-nap foam rollers and tip several times. Apply with premium China bristle brush.
|
Nauta 9 Gallon Flexible Fuel Tank from IMTRA CORPORATION
Flexible gasoline tanks won't rust, don't rattle, are easy to tie down, easy to carry, and won't scrape your boat. The Nauta 9-Gallon flexible fuel tank features comfortable, molded carrying handles and rugged 840-denier nylon construction. Fitted with a 1 1/2'' pivoting fill and a capped and 1/4'' NPT hose barb. Measures 28 1/2'' x 17 1/2'' x 6 1/2''.
|
Cetol Marine Light - Quart from INTERLUX
Enhances and protects the natural beauty of interior and exterior woodSemi-transparent finish prevents weathering and repels water. just wash wood thoroughly and apply. Three coats are recommended for the first application, followed by annual touchups. Marine Light is more translucent than Marine. If a gloss finish is desired, either may be overcoated with Marine Gloss. Quart. Long-lasting adhesion and protection from UV rays and weathering. Flexible, breathable, translucent finish; Quarts.
|
VC-Offshore - Baltoplate Gray, Gallon from INTERLUX
Used by performance boatsVC Offshore combines superior antifouling performance with a super smooth low friction surface for the performance conscious boater. This high-strength, vinyl antifouling paint, fortified with Teflon® yields a hard, very smooth finish for maximum durability, reduced friction and increased performance. High copper loading fights fouling on performance boats in saltwater. Can be used in fresh, salt and brackish waters. Should not be applied over non-vinyl bottom paints.
|
Orpine Boat Soap, Quart from ORPIN
Fresh pine scent!Replaces musty mildew odors with a pleasant fresh pine scent. Just one ounce in three gallons of fresh or saltwater will clean a 45'L boat. Biodegradable. Biodegradable.
|
Micron CSC Antifouling Paint, Red, Quart from INTERLUX
Haul and relaunch without loss of performance The innovative copper-copolymer formula of Micron CSC provides a controlled release of antifouling biocide at the paint surface, which means that the longevity of the coating is related to the amount of paint applied. Can be applied over most paints in good condition. Micron CSC will not lose its effectiveness when hauled out of the water for extended periods of time (such as winter storage). Type: Copolymer . 2% Cuprous Oxide . Additives: None .
|
Fiberglass Boat Cleaner 920 1/2 Gallon from COLLINITE
Removes rust, exhaust, oil, grease, and oxidation stains from fiberglass. Restores the original color quickly without hard rubbing or buffing, leaves a chemically clean surface to which waxes can bond. Use with fiberglass boat wax or heavy-duty paste Fleetwax . Made in U. S. A.
|
Brightside Pre-Kote Primer - Gray, Quart from INTERLUX
Fills minor blemishes and sands easilyOne part primer for use with Brightside or any other one-part topside enamel. Microspheres provide high build and improved sandability. (Replaces Brightside Primer and 279 White Undercoater. ) Application: Brush, roller, airless/conventional spray . Number of Coats Recommended: One or two, depending on surface condition. Drying: Overcoating: 6 to 12 hrs. Drying Time: To touch: 1 to 3 hrs. Coverage: Brush: 112 sq. ft/qt, 450 sq. ft/gal; Spray: 87 sq.
|
High Gloss Gelcoat Compound Gallon from 3M PRODUCTS
Leaves a high gloss finish without wheel or swirl marksRemove fine scratches from production gel coat. Unique formulation reduces slinging while buffing and leaves a high gloss finish without wheel or swirl marks. Contains no wax or silicone.
|
|
|
|
|
Adaptor Fitting for Suzuki & Honda Lower Units from WEST MARINE
Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefisher lower units Fits standard quart plastic bottles. Flexible hose gets to hard-to-reach fill plugs.
|
|
Gallon from STERLING, Quart from STERLING, Gallon from INTERLUX
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Trilux 33 Antifouling Paint
Replacing Trilux and Micron 33, Trilux 33 is enhanced by the addition of booster technology in the form of Biolux. Biolux is a system that combines advanced biocides with customized paint resin technology to optimize biocide release and fouling prevention. Type: Ablative . Recommended Usage: Fresh, salt, brackish water; aluminum hulls, outdrives, outboards (can be applied to fiberglass, wood and other underwater metals) . Biocide: 24% Cuprous Thiocyanate . Number of Coats Recommended: Two .
Part No: YBA068/1
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Trilux 33 Antifouling Paint
Replacing Trilux and Micron 33, Trilux 33 is enhanced by the addition of booster technology in the form of Biolux. Biolux is a system that combines advanced biocides with customized paint resin technology to optimize biocide release and fouling prevention. Type: Ablative . Recommended Usage: Fresh, salt, brackish water; aluminum hulls, outdrives, outboards (can be applied to fiberglass, wood and other underwater metals) . Biocide: 24% Cuprous Thiocyanate . Number of Coats Recommended: Two .
Part No: YBA068/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Trilux Prop & Drive Antifouling Paint
For aluminum outdrives, outboards and hulls Trilux® Prop & Drive has been specially formulated with Biolux™ to be the safest & most effective product for use on aluminum outdrives & outboards. When applied over properly primed aluminum Trilux® Prop & Drive with Biolux™ will provide good antifouling protection. One can covers approximately 22sq. ft. (one lower unit). Recommended Usage: Fresh, salt, brackish water; trailerable, dry-stored boats; aluminum lower units- outdrives .
Part No: YBA063A/16
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Trilux Prop & Drive Antifouling Paint
For aluminum outdrives, outboards and hulls Trilux® Prop & Drive has been specially formulated with Biolux™ to be the safest & most effective product for use on aluminum outdrives & outboards. When applied over properly primed aluminum Trilux® Prop & Drive with Biolux™ will provide good antifouling protection. One can covers approximately 22sq. ft. (one lower unit). Recommended Usage: Fresh, salt, brackish water; trailerable, dry-stored boats; aluminum lower units- outdrives .
Part No: YBA068A/16
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Trilux Prop & Drive Antifouling Paint
For aluminum outdrives, outboards and hulls Trilux® Prop & Drive has been specially formulated with Biolux™ to be the safest & most effective product for use on aluminum outdrives & outboards. When applied over properly primed aluminum Trilux® Prop & Drive with Biolux™ will provide good antifouling protection. One can covers approximately 22sq. ft. (one lower unit). Recommended Usage: Fresh, salt, brackish water; trailerable, dry-stored boats; aluminum lower units- outdrives .
Part No: Y5499A
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Trilux Prop & Drive Antifouling Paint
For aluminum outdrives, outboards and hulls Trilux® Prop & Drive has been specially formulated with Biolux™ to be the safest & most effective product for use on aluminum outdrives & outboards. When applied over properly primed aluminum Trilux® Prop & Drive with Biolux™ will provide good antifouling protection. One can covers approximately 22sq. ft. (one lower unit). Recommended Usage: Fresh, salt, brackish water; trailerable, dry-stored boats; aluminum lower units- outdrives .
Part No: Y5495A/16
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Trilux Prop & Drive Antifouling Paint
For aluminum outdrives, outboards and hulls Trilux® Prop & Drive has been specially formulated with Biolux™ to be the safest & most effective product for use on aluminum outdrives & outboards. When applied over properly primed aluminum Trilux® Prop & Drive with Biolux™ will provide good antifouling protection. One can covers approximately 22sq. ft. (one lower unit). Recommended Usage: Fresh, salt, brackish water; trailerable, dry-stored boats; aluminum lower units- outdrives .
Part No: YPA985N/16
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Trinidad SR Antifouling Paint
Dual biocide paint for heavy-fouling areas Combines Pettit’s proven performer with the latest technology in soft-growth antifouling protection, a biocide booster called CIBA Irgarol, which significantly reduces slime, algae and other marine and freshwater organisms. The high copper loading boosted by Irgarol together give you the maximum protection against growth in the most extreme conditions. Voted "Gear of the Year" by Practical Sailor in both 2000 and 2004. Type: Modified epoxy .
Part No: 1277GA
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Trinidad SR Antifouling Paint
Dual biocide paint for heavy-fouling areas Combines Pettit’s proven performer with the latest technology in soft-growth antifouling protection, a biocide booster called CIBA Irgarol, which significantly reduces slime, algae and other marine and freshwater organisms. The high copper loading boosted by Irgarol together give you the maximum protection against growth in the most extreme conditions. Voted "Gear of the Year" by Practical Sailor in both 2000 and 2004. Type: Modified epoxy .
Part No: 1277QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Bottom Paint & Coatings->Trinidad SR Antifouling Paint
Mail-In Rebate Download Rebate Form (PDF) Dual biocide paint for heavy-fouling areas Combines Pettit’s proven performer with the latest technology in soft-growth antifouling protection, a biocide booster called CIBA Irgarol, which significantly reduces slime, algae and other marine and freshwater organisms. Type: Modified epoxy . Recommended Usage: High fouling areas, year-round immersion, fiberglass, wood and steel hulls . Biocide: 70% Cuprous Oxide . Additives: Irgarol anti-slime additive .
Part No: 1877GA
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Trinidad SR Antifouling Paint
Dual biocide paint for heavy-fouling areas Combines Pettit’s proven performer with the latest technology in soft-growth antifouling protection, a biocide booster called CIBA Irgarol, which significantly reduces slime, algae and other marine and freshwater organisms. The high copper loading boosted by Irgarol together give you the maximum protection against growth in the most extreme conditions. Voted "Gear of the Year" by Practical Sailor in both 2000 and 2004. Type: Modified epoxy .
Part No: 1677GA
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Bottom Paint & Coatings->Trinidad SR Antifouling Paint
Mail-In Rebate Download Rebate Form (PDF) Dual biocide paint for heavy-fouling areas Combines Pettit’s proven performer with the latest technology in soft-growth antifouling protection, a biocide booster called CIBA Irgarol, which significantly reduces slime, algae and other marine and freshwater organisms. Recommended Usage: High fouling areas, year-round immersion, fiberglass, wood and steel hulls . Additives: Irgarol anti-slime additive . Number of Coats Recommended: Two . /qt.
Part No: 1377GA
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Trinidad SR Antifouling Paint
Dual biocide paint for heavy-fouling areas Combines Pettit’s proven performer with the latest technology in soft-growth antifouling protection, a biocide booster called CIBA Irgarol, which significantly reduces slime, algae and other marine and freshwater organisms. The high copper loading boosted by Irgarol together give you the maximum protection against growth in the most extreme conditions. Voted "Gear of the Year" by Practical Sailor in both 2000 and 2004. Type: Modified epoxy .
Part No: 1877QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->U-1000 White Primer
For fiberglass and existing paint. Mix U-1000 in a 2:1 ratio with U-1000C catalyst for brush or spray application. To brush, thin with U-2965. To spray, thin with either U-1014 or U-1385. Finish sand with 220 grit for a fine topcoat finish. A mixed quart covers about 50 sq.
Part No: U-1000 QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->U-1000 White Primer
For fiberglass and existing paint. Mix U-1000 in a 2:1 ratio with U-1000C catalyst for brush or spray application. To brush, thin with U-2965. To spray, thin with either U-1014 or U-1385. Finish sand with 220 grit for a fine topcoat finish. A mixed quart covers about 50 sq.
Part No: U-1000P
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->U-1000C Catalyst Primer
Use with U-1000 Primer.
Part No: U-1000C GAL
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->U-1000C Catalyst Primer
Use with U-1000 Primer.
Part No: U-1000C PT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->U-1000C Catalyst Primer
Use with U-1000 Primer.
Part No: U-1000C QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->U-1001C Top Coat Spray Catalyst
Spray catalyst for gloss topcoats.
Part No: U-1001C GAL
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->U-1014 Urethane Summer Reducer
Summer urethane reducer. For use with urethane primers U-1171, U-1482, U-3225.
Part No: U-1014 QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->U-1014 Urethane Summer Reducer
Summer urethane reducer. For use with urethane primers U-1171, U-1482, U-3225.
Part No: U-1014 GAL
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->U-1289 Epoxy Reducer
For use with all epoxy-based primers.
Part No: U-1289 GAL
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->U-1289 Epoxy Reducer
For use with all epoxy-based primers.
Part No: U-1289 QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->U-1385 Winter Urethane Reducer
Use with with all urethane topcoats and urethane finish primers by spray.
Part No: U-1385 GAL
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->U-1385 Winter Urethane Reducer
Use with with all urethane topcoats and urethane finish primers by spray.
Part No: U-1385 QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->U-2900 Urethane Accelerator
For U-2900 use maximum of 1 oz per catalyzed gallon of topcoat. To be added in small quantities to accelerate the drying schedule of Urethane Topcoats and Primers.
Part No: U-2900-4OZ
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->U-2900 Urethane Accelerator
For U-2900 use maximum of 1 oz per catalyzed gallon of topcoat. To be added in small quantities to accelerate the drying schedule of Urethane Topcoats and Primers.
Part No: U-2900-2
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->U-2965 Brushing Thinner Solvent
Used to reduce high build and finish primers, gloss topcoats and U-1000.
Part No: U-2965 GAL
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->U-2965 Brushing Thinner Solvent
Used to reduce high build and finish primers, gloss topcoats and U-1000.
Part No: U-2965 QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->U-3218 Flattener Paste - Quart
To order this product in gallon click here.
Part No: U-3218 QT
|
|
|