Top Sellers
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
Capstan 1000 Rope Winch from POWERWINCH
Versatile system uses an easy to operate foot switch to retrieve anchors or fishing pots or provide power assistance on limited crew sailboats. Solid, 1-piece, machined capstan features aluminum housing with stainless steel internal shafts and hardware. Deck mounted design saves space for rope locker. Mounting template included. Pulling Power: 1000lbs. Speed Up: 40'/min. Boat size: to 55' . Rope Type: 3-strand nylon. Draw: 27A @12v. Measure 6 5/16"H x 8"W x 10 9/16"L.
|
Fuel Hose, Type B-2 5/16" from MOELLER
We offer 5/16" and 3/8" SCG B-2 alcohol-resistant hose as used in pre-assembled fuel line. Sold by the foot.
|
Teak Plugs - 3/8" from SEAFIT
Use these teak plugs to cover screw heads or fill small holes for a beautiful smooth finish to your installation. Sizes: 1/4" 5/8" 5/16" 3/8" 1/2" 1".
|
Anchor Safety Strap from LEWMAR
18" long stainless steel; PVC coated with 4" bolt, nut and snap link Fits 1/4", 5/16" and 3/8" chain.
|
101 Polysulfide Marine Sealant - White, 10 OZ from 3M PRODUCTS
Adhesive/sealant for a wide variety of materialsOne-part polysulfide product seals joints between similar and dissimilar surfaces wood, fiberglass, metal and glass above and below the waterline. Non-sagging, non-shrinking and permanently flexible. Excellent resistance to weathering. White. Recommended Usage: Seals mechanically fastened joints, above or below water; fiberglass, wood, metal, most plastics. Cure Time: Tack free: 5 hrs; complete cure in 14-21 days; remains permanently flexible.
|
High Gloss Gelcoat Compound Gallon from 3M PRODUCTS
Leaves a high gloss finish without wheel or swirl marksRemove fine scratches from production gel coat. Unique formulation reduces slinging while buffing and leaves a high gloss finish without wheel or swirl marks. Contains no wax or silicone.
|
Sanding Discs - 5" Velcro-Backed, 40-Grit, 5 Pack from 3M PRODUCTS
Convenient hook and loop disk attachmentAdapts a 1/4” or 3/8” electric drill so it may be used as a 5” disc sander. Includes three Velcro-backed sanding discs (120-, 80- and 40-grit). Recommended Usage: Sanding fiberglass/gelcoat, paint, wood and metal. Abrasive Material: Aluminum oxide. Backing Type: Hook and loop . Disc Size: 5" disc .
|
Chafe Tape from 3M PRODUCTS
Adhesive-backed cloth chafe tape is made to wrap thimbles, docklines, and other points subject to wear.
|
Cleaner & Wax - Quart from 3M PRODUCTS
One-step processDesigned to remove light-to-medium oxidation, clean, polish and protect fiberglass gel coat and marine topside paints. A unique liquid formulation combines a compound with a special blend of waxes which restore shine and protect in one application.
|
5200 Polyurethane Adhesive/Sealant, White, 3oz. from 3M PRODUCTS
Tenacious bonds and watertight seals above or below waterline Provides exceptionally strong adhesion, yet stays flexible after it cures; may be used above or below the waterline. Ideal for underwater thru-hull fittings, hull-to-deck joints, portholes and bonding wood to fiberglass. Goes on smoothly, wont sag, and remains workable up to four hours. Cures in 57 days with no shrinking. Recommended Usage: Permanent bonding, above and below water. Removal: Mechanical removal .
|
5200 Polyurethane Adhesive/Sealant, White, 1oz. from 3M PRODUCTS
Tenacious bonds and watertight seals above or below waterline Provides exceptionally strong adhesion, yet stays flexible after it cures; may be used above or below the waterline. Ideal for underwater thru-hull fittings, hull-to-deck joints, portholes and bonding wood to fiberglass. Goes on smoothly, wont sag, and remains workable up to four hours. Cures in 57 days with no shrinking. Recommended Usage: Permanent bonding, above and below water. Removal: Mechanical removal .
|
WetOrDry™ Finishing Sandpaper - Ultra Fine 600 Grit, 5 Pack from 3M PRODUCTS
Ideal for wet sanding between coats of varnish, paint and other finishes. Made with silicon carbide, a sharp synthetic mineral that cuts fast and is satin smooth.
|
Scotchgard Marine Liquid Wax, 500ml from 3M PRODUCTS
Durable wax actually bonds to your boat's surfaceSpecial formulation uses reactive chemistry to actually bond to your boat’s surface and provide exceptionally high gloss with lasting durability. Protects gelcoat and topside coatings from damaging ultraviolet radiation, and is excellent for use on gelcoat, topside paints, painted aluminum and marine metal parts. Uses reactive chemistry to bond to your boat's surface. Exceptionally high gloss with lasting durability.
|
Marine Mildew Block from 3M PRODUCTS
Helps keep your boat fresh and looking like newUnique non-toxic formula provides long-lasting protection to help keep your boat fresh and looking like new. Works on virtually all surfaces above the waterline, including sails, seat cushions, carpeting, canvas, deck furniture, rub rails, showers, boat covers and vinyl. 16. 9oz. 16. 9oz.
|
|
6" from 3M PRODUCTS, 5" from 3M PRODUCTS, 8" from 3M PRODUCTS
|
|
Home -> Paint & Maintenance -> Sandpaper
|SPAPR-Stikit P400 2 3/4in.
Part No: 02590
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper
3M Imperial Wetordry Sanding Sheet, 9" x 11" Used in wet sanding, fine featheredging or last final sanding step before priming. Most flexible backing with more consistent scratch pattern make this 3Ms best wet sanding product. 500G.
Part No: 02037
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper
Works with electric and air drills on painted surfaces, metal, plastic and wood. Kit uses 2'' discs to reach those hard to get at surfaces. . Contains:. One 2'' disc holder. . Three 2'' RegaliteTM sanding discs. . Two 2'' Scotch-BriteTM stripping discs.
Part No: 03050NA
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper
When it's time to get serious, try this pad!An excellent aid for removing marine growth, paint layers, and crusty hull deposits, this aggressive stainless steel scrub pad is comfortable to use and will not rust or leave residue that rusts.
Part No: 35050
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper
Especially suited to wood and sealer sanding A silicone carbide, open coat, A weight sheet that is especially suited to wood and sealer sanding. The product is stearated and resin bonded, and is available in grades 240 and finer. Conforms for contour sanding .
Part No: 415N
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper
Sharp, synthetic silicon carbide cuts fast and smooth for wet or dry sanding between coats of varnish, paint or other finishes, sanding metal for repainting or prior primer coat, and wet finishing of plastic/fiberglass and top coats. Use with water to red uce clogging and extend abrasive life.
Part No: 88599NA
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper -> Sandpaper Accessories
.
Part No: 99425NA
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper
Sturdy, durable and shaped to comfortably fit the hand. An embossed rubber face allows good adhesion for Stikit™ Sheet Rolls.
Part No: 05440
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper
Uses a 2 3/4'' x 9'' sheet, which is 1/4 of a standard 9'' x 11'' sheet of sandpaper, or 1/2 of a ''Long & Skinny. '' Hold paper securely during wet or dry sanding.
Part No: 09292
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper
Grades available for stripping paint down to metal, shaping and sanding plastic filler and removal of coarser scratches in body filler and scratch refinement of bare metal.
Part No: 00615
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper
Aggressive, sharp, fast cutting and long lasting discs. Their construction also resists dulling, loading and edge wear.
Part No: 1489
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper -> Abrasive Long And Skinny->Imperial L/S Sheets (PB) (AO) - P120E-Grit, 50 Pk
Aluminum oxide and tough Cubitron mineral blend for exceptionally fast cut. Tough E-weight paper backing assists cut and is durable for longer life. Purple color indicates top quality and best cost/value. 80-grit. Package of 50. Aluminum oxide, Cubitron mineral blend abrasive. Imperial E-Weight paper backing assists cut.
Part No: 00389
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper -> Abrasive Long And Skinny->Imperial L/S Sheets (PB) (AO) - P120E-Grit, 50 Pk
Aluminum oxide and tough Cubitron mineral blend for exceptionally fast cut. Tough E-weight paper backing assists cut and is durable for longer life. Purple color indicates top quality and best cost/value. 80-grit. Package of 50. Aluminum oxide, Cubitron mineral blend abrasive. Imperial E-Weight paper backing assists cut.
Part No: 00393
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper -> Abrasive Long And Skinny->Imperial L/S Sheets (PB) (AO) - P120E-Grit, 50 Pk
Aluminum oxide and tough Cubitron mineral blend for exceptionally fast cut. Tough E-weight paper backing assists cut and is durable for longer life. Purple color indicates top quality and best cost/value. 80-grit. Package of 50. Aluminum oxide, Cubitron mineral blend abrasive. Imperial E-Weight paper backing assists cut.
Part No: 00391
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper -> Abrasive Long And Skinny->Imperial L/S Sheets (PB) (AO) - P120E-Grit, 50 Pk
Aluminum oxide and tough Cubitron mineral blend for exceptionally fast cut. Tough E-weight paper backing assists cut and is durable for longer life. Purple color indicates top quality and best cost/value. 80-grit. Package of 50. Aluminum oxide, Cubitron mineral blend abrasive. Imperial E-Weight paper backing assists cut.
Part No: 00394
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper -> Sandpaper Accessories
High-density, tear-resistant, clear film that is treated on both sides for excellent paint overspray adhesion. 3" film unfolds to 12' x 400'. . Use with Overspray Protective Sheet Masker. . Not recommended for overnight outdoor use.
Part No: 06727
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper -> Sandpaper Accessories
3M™ Imperial™ Hookit™ Sheet 01878 4-1/2 in x 30 in. P40E, 10 sheets per sleeve.
Part No: 01878
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper -> Sandpaper Accessories->Steel Wool Pads
Easier on the hands than steel wool. Won’t rust, splinter or shed.
Part No: 10118
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper -> Sandpaper Accessories->Steel Wool Pads
Easier on the hands than steel wool. Won’t rust, splinter or shed.
Part No: 10120
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper -> Sandpaper Discs
The backing provides excellent shelling and tear resistance, thus increasing the life and performance of the disc.
Part No: 21799
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper -> Sandpaper Discs->Gold 236U Sanding Discs
Economical, tough paper-backed discs offer long life and a consistent finish. Aluminum oxide mineral with a non-staining Fre-Cut coating resists loading. Excellent for gel coat, wood and plastic applications.
Part No: 21794
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper -> Sandpaper Discs->Gold Disc (FB) - 6", P500-Grit, 75 Pk
3M™ 255L Gold Film Discs are designed for use on marine paints, gel coat and primer systems that are tougher to sand. 3M™ 260L Gold Film Discs are designed for machine sanding in finer grades prior to compounding.
Part No: 01329
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper -> Sandpaper Discs->Gold Disc (FB) - 6", P500-Grit, 75 Pk
3M™ 255L Gold Film Discs are designed for use on marine paints, gel coat and primer systems that are tougher to sand. 3M™ 260L Gold Film Discs are designed for machine sanding in finer grades prior to compounding.
Part No: 01323
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper -> Sandpaper Discs->Gold Disc (FB) - 6", P500-Grit, 75 Pk
3M™ 255L Gold Film Discs are designed for use on marine paints, gel coat and primer systems that are tougher to sand. 3M™ 260L Gold Film Discs are designed for machine sanding in finer grades prior to compounding.
Part No: 01328
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper -> Sandpaper Discs->Gold Disc (FB) - 6", P500-Grit, 75 Pk
3M™ 255L Gold Film Discs are designed for use on marine paints, gel coat and primer systems that are tougher to sand. 3M™ 260L Gold Film Discs are designed for machine sanding in finer grades prior to compounding.
Part No: 01332
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper -> Sandpaper Discs->Gold Disc (FB) - 6", P500-Grit, 75 Pk
3M™ 255L Gold Film Discs are designed for use on marine paints, gel coat and primer systems that are tougher to sand. 3M™ 260L Gold Film Discs are designed for machine sanding in finer grades prior to compounding.
Part No: 01330
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper -> Sandpaper Discs->Gold Disc (FB) - 6", P500-Grit, 75 Pk
3M™ 255L Gold Film Discs are designed for use on marine paints, gel coat and primer systems that are tougher to sand. 3M™ 260L Gold Film Discs are designed for machine sanding in finer grades prior to compounding.
Part No: 01326
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper -> Sandpaper Discs->Gold Disc (FB) - 6", P500-Grit, 75 Pk
3M™ 255L Gold Film Discs are designed for use on marine paints, gel coat and primer systems that are tougher to sand. 3M™ 260L Gold Film Discs are designed for machine sanding in finer grades prior to compounding.
Part No: 01321
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper -> Sandpaper Discs->Gold Disc (FB) - 6", P500-Grit, 75 Pk
3M™ 255L Gold Film Discs are designed for use on marine paints, gel coat and primer systems that are tougher to sand. 3M™ 260L Gold Film Discs are designed for machine sanding in finer grades prior to compounding.
Part No: 01324
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper -> Sandpaper Discs->Gold Disc (FB) - 6", P500-Grit, 75 Pk
3M™ 255L Gold Film Discs are designed for use on marine paints, gel coat and primer systems that are tougher to sand. 3M™ 260L Gold Film Discs are designed for machine sanding in finer grades prior to compounding.
Part No: 01325
|
|
|