Top Sellers
Trim Tab Zinc Anode from CANADA METALS
Attaches to standard Bennett trim tabs where actuator bolts to plate.
|
Zinc Grouper Anode from CANADA METALS
Supplements your boat's existing anodes An excellent anodic device to supplement a vessel’s existing anode system, especially to counteract stray current from defective shore power. Clip to bolt on outdrive. Clip to grounding strap if possible or wire items together with copper wire and clip to wire. Do not connect to negative battery terminals. Dimensions: 8 1/4"L x 3 1/4"W x 1 3/8"D.
|
Aluminum Anode Kit Bravo II & III from CANADA METALS
Offered in aluminum, for use in salt or brackish water, or magnesium, for freshwater only.
|
Auxiliary Steering Kits for Trolling Motors - Zinc Rod from MARINETECH PRODUCTS
Steer your trolling motor with your boat's main steering wheel. These connector rods attach the trolling motor directly to the main engine—when the big one moves, the little one moves along with it. Kits come complete with two quick disconnect ball joint assemblies which make taking it off when you don't need it easy. Connect rod length is 24", cut it to size for a perfect fit. Use the drive bracket for motors that have SeaStar or Teleflex steering.
|
CP Zinc Cupboard Catch from PERKO
Chrome-plated zinc. . Supplied with box strike. . Measures: 1 1/2"W x 1 7/8"L . Requires #6 fasteners (not included). Made in USA.
|
CP Zinc Sliding Window Stop from PERKO
Chrome-plated zinc with plastic cover on stopping plate. . Base measures 3/4"W x 1 7/8"L. . Requires #8 fasteners (not included). . Stopping plate length: 1 1/2'' . Made in U. S. A.
|
CP Zinc Elbow Catch from PERKO
Chrome-plated zinc with stainless steel spring. . Measures: 1 1/8" x 9/16" . Requires #6 RH screws (Not included).
|
Zinc Chromate Yellow Spray Primer from MOELLER
For use on aluminum and galvanized steel surfaces above or below the waterline, this primer chemically etches into aluminum and forms a corrosion-resistant surface. Helps to create an even, bondable surface for top coat adhesion. Select color (Green or Yellow) that contrasts the least with the top coat you plan to apply. 12oz.
|
Boeshield T-9 Spray Lube from BOESHIELD
Penetrates, lubricates and protects This combination of solvents, lubricants and waxes was designed to penetrate, lubricate and protect surfaces, and to displace moisture. It dries to a thin, waxy, corrosion-preventing film that clings to metal for months. It will loosen rusty and corroded parts and is safe on paints, plastics and vinyls. Aerosol spray gets into cracks and crevices. 12oz.
|
10 Micron Diesel Fuel Filter/Water Separator with Metal Bowl from RACOR-PARKER FILTRAT
Racor’s Aquabloc filter media removes virtually 100% of water and solid contaminants. Filters have die-cast aluminum heads and come in different sizes for diesel engines and any rate of fuel flow. To be used on the suction side of the pump. See-thru bowls allow visual inspection for water; metal bowls are recommended for use in areas of high heat and are required by the US Coast Guard on inboard engines and gensets. Inlets/Outlets: 1/4" NPT female . Bowl Material: See-thru polymer .
|
Power Bubbles 12V DC Aerator from MARINE METALS
This system runs on low current as it's dual bellows aerate up to 2L per minute of air. It saturates circulating water with oxygen. Double discharge allows aeration of one or two livewells. Increases flow capacity. Includes 10' of air tubing. Two large airstones allow the pump to be mounted in any protected area. Suitable for fresh or saltwater. Two anti-siphon valves protect pump against water intrusion. Quietly operates with solid-state circuits. Draw: 1/4A at 12V DC.
|
Marine-Tex Putty, Gray, 14oz. from TRAVACO
Versatile epoxy putty for wide variety of repairs Repairs damaged hulls and equipment stronger than before. Fixes gel coat chips and leaks in fuel tanks, water tanks, piping, engine blocks, cracked crank cases, etc. Can be used in working temperatures of -40° to 250°F. Marine-Tex bonds to all metals, plastics, plywood, etc. Handles like putty. Formulation: Two-part epoxy putty . Recommended Usage: Bonds to aluminum, PVC, fiberglass, most plastics, metals, glass, cement and hard/soft woods .
|
Horizontal Chrome/Brass Masthead Light, Boat Size to 12m (39'4"), 2-3/8"H x 7/8"W from PERKO
For powerboats and sailboats. Chrome-plated brass or chrome-plated zinc. Mounting Hardware: #4 FHMS Volts: 12V Draw: 0.
|
Adaptor Fitting for Suzuki & Honda Lower Units from WEST MARINE
Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefisher lower units Fits standard quart plastic bottles. Flexible hose gets to hard-to-reach fill plugs.
|
Steamship Funnel Waste Basket from AUTHENTIC MODELS
A charming reminder of the age of steam This jauntily raked wastebasket is crafted from hand turned and shaped metal.
|
|
CM806190KITA from CANADA METALS, Zinc
|
|
Home -> Paint & Maintenance -> Zinc Anodes->Alpha I, Bravo I, Bravo II/III Outdrive & Verado Outboard Aluminum & Magnesium Anode Kits
Offered in aluminum, for use in salt or brackish water, or magnesium, for freshwater only.
Part No: CMVERADO6KITA
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes->Alpha I, Bravo I, Bravo II/III Outdrive & Verado Outboard Aluminum & Magnesium Anode Kits
Offered in aluminum, for use in salt or brackish water, or magnesium, for freshwater only.
Part No: CMBRAVO23KITM
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes->Alpha I, Bravo I, Bravo II/III Outdrive & Verado Outboard Aluminum & Magnesium Anode Kits
Offered in aluminum, for use in salt or brackish water, or magnesium, for freshwater only.
Part No: CMBRAVO23KITZ
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes->Alpha I, Bravo I, Bravo II/III Outdrive & Verado Outboard Aluminum & Magnesium Anode Kits
Offered in aluminum, for use in salt or brackish water, or magnesium, for freshwater only.
Part No: CMBRAVO1KITZ
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes->Alpha I, Bravo I, Bravo II/III Outdrive & Verado Outboard Aluminum & Magnesium Anode Kits
Offered in aluminum, for use in salt or brackish water, or magnesium, for freshwater only.
Part No: CMALPHAKITZ
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes->Alpha I, Bravo I, Bravo II/III Outdrive & Verado Outboard Aluminum & Magnesium Anode Kits
Offered in aluminum, for use in salt or brackish water, or magnesium, for freshwater only.
Part No: CMBRAVO3KITZ
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes->Aluminum Anodes for MerCruiser Stern Drive
Aluminum Anodes for MerCruiser Stern Drive Where indicated, sold as a kit.
Part No: CM806190KITA
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes->Anode-Mercury Fin
All Mercury anodes conform to Mil-A-24779. Standard Skeg 2 1/4".
Part No: 34127-A
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes->Canada Metal Outdrive Anode - Volvo 3855411
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface. When the anode is almost dissolved, it needs to be replaced. Canada Metal uses a special steel combination fastener that makes it possible to use their Balldriver, which is a hex driver with a universal ball tip, to make easy adjustments.
Part No: CM875812Z
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes->Canada Metal Outdrive Anode - Volvo 3855411
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface. When the anode is almost dissolved, it needs to be replaced. Canada Metal uses a special steel combination fastener that makes it possible to use their Balldriver, which is a hex driver with a universal ball tip, to make easy adjustments.
Part No: CM872139Z
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes->Canada Metal Outdrive Anode - Volvo 3855411
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface. When the anode is almost dissolved, it needs to be replaced. Canada Metal uses a special steel combination fastener that makes it possible to use their Balldriver, which is a hex driver with a universal ball tip, to make easy adjustments.
Part No: CMV18M
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes->Canada Metal Outdrive Anode - Volvo 3855411
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface. When the anode is almost dissolved, it needs to be replaced. Canada Metal uses a special steel combination fastener that makes it possible to use their Balldriver, which is a hex driver with a universal ball tip, to make easy adjustments.
Part No: CM872793Z
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes->Canada Metal Outdrive Anode - Volvo 3855411
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface. When the anode is almost dissolved, it needs to be replaced. Canada Metal uses a special steel combination fastener that makes it possible to use their Balldriver, which is a hex driver with a universal ball tip, to make easy adjustments.
Part No: CM832598M
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes->Canada Metal Outdrive Anode - Volvo 3855411
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface. When the anode is almost dissolved, it needs to be replaced. Canada Metal uses a special steel combination fastener that makes it possible to use their Balldriver, which is a hex driver with a universal ball tip, to make easy adjustments.
Part No: CM852835Z
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes->Canada Metal Outdrive Anode - Volvo 3855411
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface. When the anode is almost dissolved, it needs to be replaced. Canada Metal uses a special steel combination fastener that makes it possible to use their Balldriver, which is a hex driver with a universal ball tip, to make easy adjustments.
Part No: CM3855411Z
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes->Canada Metal Outdrive Anode - Volvo 3855411
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface. When the anode is almost dissolved, it needs to be replaced. Canada Metal uses a special steel combination fastener that makes it possible to use their Balldriver, which is a hex driver with a universal ball tip, to make easy adjustments.
Part No: CM875821M
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes->Canada Metal Outdrive Anode - Volvo 3855411
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface. When the anode is almost dissolved, it needs to be replaced. Canada Metal uses a special steel combination fastener that makes it possible to use their Balldriver, which is a hex driver with a universal ball tip, to make easy adjustments.
Part No: CM875821Z
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes->Canada Metal Outdrive Anode - Volvo 3855411
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface. When the anode is almost dissolved, it needs to be replaced. Canada Metal uses a special steel combination fastener that makes it possible to use their Balldriver, which is a hex driver with a universal ball tip, to make easy adjustments.
Part No: CM832598Z
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes->Canada Metal Outdrive Anode - Volvo 3855411
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface. When the anode is almost dissolved, it needs to be replaced. Canada Metal uses a special steel combination fastener that makes it possible to use their Balldriver, which is a hex driver with a universal ball tip, to make easy adjustments.
Part No: CMV17
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes->Canada Metal Outdrive Anode - Volvo 3855411
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface. When the anode is almost dissolved, it needs to be replaced. Canada Metal uses a special steel combination fastener that makes it possible to use their Balldriver, which is a hex driver with a universal ball tip, to make easy adjustments.
Part No: CMV18
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes->Canada Metal Outdrive Anode - Volvo 3855411
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface. When the anode is almost dissolved, it needs to be replaced. Canada Metal uses a special steel combination fastener that makes it possible to use their Balldriver, which is a hex driver with a universal ball tip, to make easy adjustments.
Part No: CM852835M
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes->Canada Metals - Outboard/Outdrive Anodes
.
Part No: CMMP83RZ
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes->Canada Metals - Outboard/Outdrive Anodes
.
Part No: CMMP70RZ
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes->Canada Metals - Outboard/Outdrive Anodes
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface. When the anode is almost dissolved, it needs to be replaced. Canada Metal uses a special steel combination fastener that makes it possible to use their Balldriver, which is a hex driver with a universal ball tip, to make easy adjustments.
Part No: CMMP63RZ
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes->Max Prop Zinc Kit
Three blade feathering propeller anodes. Each kit contains two zincs, two sets mounting screws (1ea. years 1984-2003, 1ea. 2004-current), one grease zerk, two grease port screws, allen wrenches, sandpaper and installation instructions.
Part No: MP-ZINKT-70
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes->Max Prop Zinc Kit
Three blade feathering propeller anodes. Each kit contains two zincs, two sets mounting screws (1ea. years 1984-2003, 1ea. 2004-current), one grease zerk, two grease port screws, allen wrenches, sandpaper and installation instructions.
Part No: MP-ZINKT-83
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes->Merc Alpha Plate (Zinc / Aluminum)
Merc Alpha Plate Anode.
Part No: 821629
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes->Merc Hydra Ram Alpha Anode
Stainless steel fasteners, galvanized steel inserts (allowing the anode lower resistive build-up) and the highest grade of zinc and aluminum materials.
Part No: 806189
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes->Merc Hydra Ram Alpha Anode
Stainless steel fasteners, galvanized steel inserts (allowing the anode lower resistive build-up) and the highest grade of zinc and aluminum materials.
Part No: 806189-A
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes->Merc I/O Zinc Anode
Mercruiser Drive System Anodes Replaces: 821629, A1, Q1 .
Part No: 18-6080
|
|
|