DinghyMate - 3 Gal. Fuel Tank from SCEPTER MANUFACTURIN
Rugged, polyethylene tank mounts on the transom (up to 2 1/2” thick) right under outboard motor of an inflatable boat or dinghy, creating a safer, more spacious environment free from heavy, shifting tanks. The vented tank includes a sturdy carry handle. Fits most outboards and works with smaller aluminum vessels. ISO and CSA Certified. Meets ABYC standards. Dinghy Mate 3Gal. measures 12"H x 6 3/4"W x 23"L. Dinghy Mate 6 Gal.

DinghyMate - 6 Gal. Fuel Tank from SCEPTER MANUFACTURIN
Rugged, polyethylene tank mounts on the transom (up to 2 1/2” thick) right under outboard motor of an inflatable boat or dinghy, creating a safer, more spacious environment free from heavy, shifting tanks. The vented tank includes a sturdy carry handle. Fits most outboards and works with smaller aluminum vessels. ISO and CSA Certified. Meets ABYC standards. Dinghy Mate 3Gal. measures 12"H x 6 3/4"W x 23"L. Dinghy Mate 6 Gal.

G/Flex 655, 2 Gal. ( One 1 gal. bottle of resin, one 1 gal. bottle of hardener) from WEST SYSTEM
G/flex 655 Thickened Epoxy Adhesive comes with a thickening agent already added. G/flex offers important features: Toughness and Flexibility G/flex has been toughened. With a modulus of elasticity of 150,000 psi (WEST SYSTEM 105 Resin/205 Hardener has a modulus of elasticity of 450,000 psi), G/flex is more flexible and can deflect further than WEST SYSTEM 105/205, while being much stiffer than typical adhesive sealants. Bonds to wet and damp surfaces G/flex has the ability to glue damp woods.

PowerSurvivor 80E Watermaker from KATADYN
Provides lots of water and requires minimal space Providing 3. 5 gallons per hour, the modular 80E is the best choice for the cruising family or couples who want luxurious amounts of water. The compact, modular unit design provides lots of water without taking up a lot of space. Stainless-steel pump and Endurance series drive provides years of quiet, reliable service. Dimensions (cm): 15. 2 x 40. 64 x 35. 6 Dimensions (in): 6 x 16 x 14 Output (gal): 1. 50 gal/h (± 15%) Output (L): 12.

Bristol Amber Sealer Kit, Gal. from PHREDD INCORPORATED
Fast and easy to use Bristol wood finish does not require sanding between coats and only needs about one hour drying time between coats—so you can quickly finish your project and get out on the water and enjoy yourself! The formulation can be applied “wet on wet” with no sanding required between coats. Recommended Usage: Interior and exterior use; Above the waterline use only . Formulation: Two-part urethane . Application Methods: Brush, roller, spray . Drying Time: To overcoat: Approx. 1hr.

Fiberglass Bottomkote ACT w/Irgarol, Blue, Gal from INTERLUX
This technology enables ACT to erode away with use and eliminates the build-up of old spent coatings and the heavy sanding needed to remove them. Provides excellent protection against all marine fouling in moderate to heavy fouling waters. Can be used in fresh, salt and brackish waters. Not for sale in California and in States where prohibited by law. Type: Ablative . Recommended Usage: Low to high fouling areas; Trailerables, fiberglass, wood, steel hulls . Number of Coats Recommended: 2.

Fiberglass Bottomkote ACT w/Irgarol, Dark Blue, Gal from INTERLUX
This technology enables ACT to erode away with use and eliminates the build-up of old spent coatings and the heavy sanding needed to remove them. Provides excellent protection against all marine fouling in moderate to heavy fouling waters. Can be used in fresh, salt and brackish waters. Not for sale in California and in States where prohibited by law. Type: Ablative . Recommended Usage: Low to high fouling areas; Trailerables, fiberglass, wood, steel hulls . Number of Coats Recommended: 2.

Fiberglass Bottomkote ACT w/Irgarol, Red, Gal from INTERLUX
This technology enables ACT to erode away with use and eliminates the build-up of old spent coatings and the heavy sanding needed to remove them. Provides excellent protection against all marine fouling in moderate to heavy fouling waters. Can be used in fresh, salt and brackish waters. Not for sale in California and in States where prohibited by law. Type: Ablative . Recommended Usage: Low to high fouling areas; Trailerables, fiberglass, wood, steel hulls . Number of Coats Recommended: 2.

Fiberglass Bottomkote ACT w/Irgarol, Green, Gal from INTERLUX
This technology enables ACT to erode away with use and eliminates the build-up of old spent coatings and the heavy sanding needed to remove them. Provides excellent protection against all marine fouling in moderate to heavy fouling waters. Can be used in fresh, salt and brackish waters. Not for sale in California and in States where prohibited by law. Type: Ablative . Recommended Usage: Low to high fouling areas; Trailerables, fiberglass, wood, steel hulls . Number of Coats Recommended: 2.

Fiberglass Bottomkote ACT w/Irgarol, Black, Gal from INTERLUX
This technology enables ACT to erode away with use and eliminates the build-up of old spent coatings and the heavy sanding needed to remove them. Provides excellent protection against all marine fouling in moderate to heavy fouling waters. Can be used in fresh, salt and brackish waters. Not for sale in California and in States where prohibited by law. Type: Ablative . Recommended Usage: Low to high fouling areas; Trailerables, fiberglass, wood, steel hulls . Number of Coats Recommended: 2.

Brightside Pre-Kote, White, Gallon from INTERLUX
Fills minor blemishes and sands easilyOne part primer for use with Brightside or any other one-part topside enamel. Microspheres provide high build and improved sandability. (Replaces Brightside Primer and 279 White Undercoater. ) Application: Brush, roller, airless/conventional spray . Number of Coats Recommended: One or two, depending on surface condition. Drying: Overcoating: 6 to 12 hrs. Drying Time: To touch: 1 to 3 hrs. Coverage: Brush: 112 sq. ft/qt, 450 sq. ft/gal; Spray: 87 sq.

Bilgekote - Gray, Gallon from INTERLUX
Helps to protect gelcoat and fiberglass in bilgeBilgekote is a fast-drying, durable coating formulated for application to bilge areas. Bilgekote helps prevent absorption of oil, gasoline or sludge into wood and fiberglass. Formulation: One-part enamel for bilge areas . Application: Brush, roller, conventional/airless spray. Number of Coats Recommended: One/Two. Coverage: Brush: 75 sq. ft/qt, 300 sq. ft/gal; Spray: 60 sq. ft/gal. Thinner: Brush: 333 - Model 117598; Spray: 216 - Model 117945.

Copper Bronze - Quart from PETTIT
Frequently used on classic wooden boats, this bronze-colored antifouling paint provides resistance to algae, barnacles, grass and zebra mussels. Not for sale in California and in States where prohibited by law. Type: Modified epoxy . Recommended Usage: Low to moderate fouling waters . Biocide: 33. 2% Cuprous Oxide . Additives: None . Number of Coats Recommended: 2 . Coverage: 400 sq. ft. /gal.

Vertical Action Pump from FYNSPRAY
Affordable, quality plastic pump with European styling. Vertical plunger action, with a 4" spout. Material: Chrome. Capacity: 58 strokes/gal. Dimensions: 4"H. Cutout Size: 1-1/4". Clearance: 9".

28-Gallon Holding Tank System from SEALAND
This complete system combines SeaLand’s TankWatch® 4 level indicator, SaniGard® vent filter, 12V SaniPump® discharge pump and TankSaver® vacuum relief valve in one package. It features separate ports for overboard and dockside discharge. The vent filter includes a cartridge that contains odor removing media, lasts one boating season and is easily replaced. The vacuum relief valve protects the tank from excessive suction by dockside pumps. Material: Polyethelyne . Wall: 5/8" . 5 gal.