Top Sellers
PE-1 Lexan Mast Pad Eye from FORESPAR
For use on our small poles. 1-3/4"H x 1-1/4" x 5/8"dia. ring. Same ring as supplied with 4-8 and 6-12 poles.
|
1/4" Aluminum Hose Barb, 1/4" Make Thread from MOELLER
Barb-Fuel 1/4Npt x 1/4 M Thrd|Barb-Fuel 1/4Npt x 1/4 M Thrd.
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
Zinc Grouper Anode from CANADA METALS
Supplements your boat's existing anodes An excellent anodic device to supplement a vessel’s existing anode system, especially to counteract stray current from defective shore power. Clip to bolt on outdrive. Clip to grounding strap if possible or wire items together with copper wire and clip to wire. Do not connect to negative battery terminals. Dimensions: 8 1/4"L x 3 1/4"W x 1 3/8"D.
|
#809 Notched Spreader from WEST SYSTEM
4'' x 4'' plastic spreader with 1/8'', 3/16'' and 1/4'' notches on three sides for quickly applying modified epoxy at a constant thickness.
|
Small Recessed Transom Shower from SHURFLO
Ideal for mounting to any horizontal surface. Kit includes spray nozzle, hose and necessary hardware for easy installation. White. Material: ABS plastic . Dimensions: 3-7/8"H x 3"W x 2-7/8"L . Port Sizes: 1/2" NPT . Clearance: 2-1/4" .
|
5/16" Wire Rope Clamp from SEADOG
Investment Cast 316 Stainless Body / AISI 304 Stainless U-Bolt. Accepts 5/16" wire. 1-5/8" Long. 1-3/8" wide.
|
CP Zinc Cupboard Catch from PERKO
Chrome-plated zinc. . Supplied with box strike. . Measures: 1 1/2"W x 1 7/8"L . Requires #6 fasteners (not included). Made in USA.
|
Whale Swim 'N' Rinse Transom Shower from WHALE PUMPS
Whale Swim 'N' Rinse Transom Shower Add the convenience of a hot and cold shower to your transom. The easy-to-install shower connects directly to the Whale Quick Connect 15 mm freshwater system. Durable, ABS plastic housing with cover hides the shower when not in use. 7' retracting hose . Water conservation control on the handset . Base plate: 6-1/2" x 11-1/2" . Allow 3-1/2" behind surface .
|
Solid Brass Vertical Action Galley Pump from FYNSPRAY
Vertical plunger pump with a gracefully arched spout. 50 strokes per gallon. 1"diameter tube. Fits 1/2"–5/8" hose. Requires 8 1/2" clearance below counter surface; 9 3/4" above Material: Brass. Capacity: 50 strokes/gal. Dimensions: 9 3/4"H. Cutout Size: 1 1/8". Clearance: 8 1/2".
|
Dual Warning Light and Buzzer from COLE HERSEE
Works with oil pressure, temperature, halon extinguishers, etc Use with grounded or ungrounded switches For use with Marine Engine Warning Alarm Kit Steel case measures 1-7/8"D x 1"W x 1-11/32"H Fits panels to 13/64" thick 12V DC .
|
12V Macerator Pump, 14A Draw from SHURFLO
Designed specifically for the marine environment with run dry premium impeller technology. 5" male thread to screw directly onto a tank flange. Type: Macerating flexible impeller gpm: 13 Macerates: Yes Self-Prime: 5' Material: Nylon body, nitrile impeller, stainless wear plate Port Sizes: Inlet: 1-1/2" barb and 1-1/2" NPT male; Outlet: 1" hose barb Dimensions: 3-3/8"H x 4-5/8"W x 11"L Innovative blade design ensures problem-free pumping Inlet port has both a 1.
|
Holding Clips, 1/4" from BECKSON MARINE INC
Heavy-duty, nonmagnetic, noncorroding clips. Require four #8 FHWS fasteners.
|
G. O'Day 222/Santana 525,Length 47", Height at tip 2 1/4", Width at butt 1 1/2", Width at tip 2" from WEST MARINE
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Can’t find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.
|
3/16" Stock Dia. U-Bolt, 1-3/8” Thread Length, 1-3/16" Hole Spacing, 1" Eye Dia. from SEAFIT
Stainless steel U-Bolts have metric threads. The top plate is held in place by small ears that are forged into the U-bolt. Includes matching backing plate. ShWt .
|
|
from GROCO, 1, 1-1, from EEMAX INC, 27-1, 38"H from JABSCO, 43"L x 4
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
890
900
910
920
930
940
950
960
970
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1,000
1,001
1,002
1,003
1,004
1,005
1,006
1,007
1,008
1,009
1,010
1,011
1,012
1,020
1,030
1,040
1,050
1,060
1,070
1,080
1,090
1,100
1,200
1,260
|
|
|
Home -> Plumbing -> Freshwater Systems -> Sinks, Faucets & Shower->Stainless Steel Sinks and Basins
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.
Part No: S67-6530-UM-D
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Sinks, Faucets & Shower->Twist Deck Shower
A refreshing departure from deck shower designs of the past, the innovative Twist offers simple operation in a space-saving, ergonomic design. Spray holes are located in the soft-body handle and a twist of the wrist is all you need to initiate water flow or mix hot with cold. Material: High-impact, glass-filled polypropylene and Nitrile . Dimensions: Side Mount: 4-3/4"dia. x 7-1/2"H (Requires 6"D clearance); Top Mount: 2-5/16"dia. x 7-1/2"D . 2' .
Part No: DS0006
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Water Heaters
The large surface area of the 7/8" heat exchanger heats water fast and built-in 5/8" hose barbs make plumbing to engine coolant easy. They come complete with ignition-protected controls and high-pressure valves and include a remote, resettable, high-temperature limiter which resets simply by turning the power off then on again. The optional Temperature Control Valve regulates coolant flow through the exchanger to maintain potable water temperature at a safe 140°F.
Part No: 40002
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Water Heaters
EEMAX Electric Instantaneous Water Heaters Hot water on demand. This unit turns on automatically and shuts off again when water flow stops – no waiting for a storage tank to heat up. Requires only one cold water input line and mounts on bulkhead. Constructed of high strength reinforced salt water resistant plastic and stainless steel. Runs on 120V shore power Compact size (10. 75”L x 5. 25”W x 2.
Part No: EX3012M
|
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Water Heaters
EEMAX Electric Instantaneous Water Heaters Hot water on demand. This unit turns on automatically and shuts off again when water flow stops – no waiting for a storage tank to heat up. Requires only one cold water input line and mounts on bulkhead. Constructed of high strength reinforced salt water resistant plastic and stainless steel. Runs on 120V shore power Compact size (10. 75”L x 5. 25”W x 2.
Part No: EX2412M
|
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Water Heaters
Hot water on demand. This unit turns on automatically and shuts off again when water flow stops – no waiting for a storage tank to heat up. Requires only one cold water input line and mounts on bulkhead. Constructed of high strength reinforced salt water resistant plastic and stainless steel. Runs on 120V shore power Compact size (10. 75”L x 5. 25”W x 2.
Part No: EX3512M
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Water Heaters
For 6-, 11-, & 20-Gallon 120VAC 1500W water heaters.
Part No: 14121
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Water Heaters->1700 Series Water Heater Replacement Parts
Water Heater Replacement PartsPressure Relief Valve Themostat Heating Element.
Part No: WH1A-S
|
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Water Heaters->1700 Series Water Heater Replacement Parts
Water Heater Replacement PartsPressure Relief Valve Themostat Heating Element.
Part No: WH3
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Water Heaters->AC Electric Water Heaters
Corrosion-resistant Kuuma water heaters have non-ferrous aluminum casings and tanks. The large surface area of the 7/8" heat exchanger heats water fast and built-in 5/8" hose barbs make plumbing to engine coolant easy. They come complete with ignition-protected controls and high-pressure valves and include a remote, resettable, high-temperature limiter which resets simply by turning the power off then on again. Two-year warranty, not valid unless used with galvanic isolator.
Part No: 41800
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Water Heaters->AC Electric Water Heaters
Corrosion-resistant Kuuma water heaters have non-ferrous aluminum casings and tanks. The large surface area of the 7/8" heat exchanger heats water fast and built-in 5/8" hose barbs make plumbing to engine coolant easy. They come complete with ignition-protected controls and high-pressure valves and include a remote, resettable, high-temperature limiter which resets simply by turning the power off then on again. Two-year warranty, not valid unless used with galvanic isolator.
Part No: 40611
|
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Water Heaters->AC Electric Water Heaters
Corrosion-resistant Kuuma water heaters have non-ferrous aluminum casings and tanks. The large surface area of the 7/8" heat exchanger heats water fast and built-in 5/8" hose barbs make plumbing to engine coolant easy. They come complete with ignition-protected controls and high-pressure valves and include a remote, resettable, high-temperature limiter which resets simply by turning the power off then on again. Two-year warranty, not valid unless used with galvanic isolator.
Part No: 41810
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Water Heaters->Isotemp WaterHeaters
Slim 15, Basic 24 and Basic 40 models may be mounted vertically or horizontally and are secured by stainless steel mounting feet which rotate to achieve the hose lead you wish. Material: Storage tank and connections: 316 stainless steel; Heating coil: nickel-plated copper; cover and mounting feet: 304 stainless steel Port Sizes: Freshwater inlet & outlet fittings are 1/2"BSP (1/2"NPT adapter fittings included); heat exchanger inlet & outlets are 1/2"NPT Draw: 6.
Part No: 602421B000003
|
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Water Heaters->Isotemp WaterHeaters
Slim 15, Basic 24 and Basic 40 models may be mounted vertically or horizontally and are secured by stainless steel mounting feet which rotate to achieve the hose lead you wish. Material: Storage tank and connections: 316 stainless steel; Heating coil: nickel-plated copper; cover and mounting feet: 304 stainless steel Port Sizes: Freshwater inlet & outlet fittings are 1/2"BSP (1/2"NPT adapter fittings included); heat exchanger inlet & outlets are 1/2"NPT Draw: 6.
Part No: 604021B000003
|
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Water Heaters->Isotemp WaterHeaters
Slim 15, Basic 24 and Basic 40 models may be mounted vertically or horizontally and are secured by stainless steel mounting feet which rotate to achieve the hose lead you wish. Material: Storage tank and connections: 316 stainless steel; Heating coil: nickel-plated copper; cover and mounting feet: 304 stainless steel Port Sizes: Freshwater inlet & outlet fittings are 1/2"BSP (1/2"NPT adapter fittings included); heat exchanger inlet & outlets are 1/2"NPT Draw: 6.
Part No: 601521S000003
|
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Water Heaters->Isotemp WaterHeaters
Slim 15, Basic 24 and Basic 40 models may be mounted vertically or horizontally and are secured by stainless steel mounting feet which rotate to achieve the hose lead you wish. Material: Storage tank and connections: 316 stainless steel; Heating coil: nickel-plated copper; cover and mounting feet: 304 stainless steel Port Sizes: Freshwater inlet & outlet fittings are 1/2"BSP (1/2"NPT adapter fittings included); heat exchanger inlet & outlets are 1/2"NPT Draw: 6.
Part No: 601623Q000003
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Water Tanks
PST-1 Pressurized Steel Water Storage Tank For freshwater or saltwater use. May be mounted in any position (including upside down) and anywhere in the cold water plumbing after the pump. Mounting hardware included 2"L x 8"diameter Capacity: 1 gal Port: 3/4" Max.
Part No: PST-1
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Water Tanks
This kit enables you to seal existing ports in your Todd water tank and install new ones wherever you need them for your installation.
Part No: 90-2218
|
|
![Water Tank Straight Pipe-to-Hose Adapter Kit from TODD ENTERPRISES]( "Water Tank Straight Pipe-to-Hose Adapter Kit from TODD ENTERPRISES")
|
|
Home -> Plumbing -> Freshwater Systems -> Water Tanks
Include all the fittings necessary to attach a water tank to the appropriate hoses (two 1/2" hose barbs and one 1 1/2" hose barb). All fittings screw into the tank; the opposite end of the fitting accepts the hose.
Part No: 93-2222
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Water Tanks
Polished stainless steel housing with butyl rubber diaphragm provides maximum corrosion resistance. Easy to install and maintain, this 2gal. capacity tank maintains consistent water pressure and temperature. Reduces pump cycling. Pre-charged to 20psi. Includes mounting feet for easy installation and a mounting bracket to accommodate any type of Shurflo water pump. Material: Stainless steel with butyl rubber diaphragm . . Pressure: 100psi . Port Sizes: 1/2" NPT female .
Part No: 3400-002
|
|
![Water Tank 90°Pipe-to-Hose Adapter Kit from TODD ENTERPRISES]( "Water Tank 90°Pipe-to-Hose Adapter Kit from TODD ENTERPRISES")
|
|
Home -> Plumbing -> Freshwater Systems -> Water Tanks
Kits include all fittings needed to attach hoses to a water tank. All fittings screw into the tank. The opposite end of the fitting accepts the hose. Teflon tape is supplied for easy installation and to ensure a tight fit. Two 1/2" hose barbs. One 1-1/2" hose barb.
Part No: 93-2223
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Water Tanks
Ideal for tight spaces where larger tanks won't fit, this tank is designed to maintain waterline pressure and reduce unwanted pump cycling—which helps to keep the pump cool and extend its life. Incorporates a butyl rubber diaphragm in a nylon housing to maintain pressure for years. Material: Nylon . Capacity: 24fl. oz. . Pressure: 125psi . Port Sizes: 1/2" NPS male . Dimensions: 4. 8"H x 3. 8"W x 9.
Part No: 182-200
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Water Tanks
Reliable Collapsible Water Carrier Holds five gallons of water and folds flat for storage.
Part No: 5000-13
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Water Tanks->Accumulator Tanks
Made of non-corrosive plastic, these tanks have an internal pressurized bladder which reduces pulsation and rapid on/off pump cycling. Bladders are pre-pressurized and their pressure can be adjusted with a standard bicycle pump. Tanks mount in any position. Include convenient Snap-Fit fittings. Material: Plastic with rubber bladder . Port Sizes: Includes four Snap-Fit port fittings: Two for 1/2" hose; Two for 1/2" Qest thread. Maximum Pressure: 125psi .
Part No: 30573-0000
|
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Water Tanks->Accumulator Tanks
Made of non-corrosive plastic, these tanks have an internal pressurized bladder which reduces pulsation and rapid on/off pump cycling. Bladders are pre-pressurized and their pressure can be adjusted with a standard bicycle pump. Tanks mount in any position. Include convenient Snap-Fit fittings. Material: Plastic with rubber bladder . Port Sizes: Includes four Snap-Fit port fittings: Two for 1/2" hose; Two for 1/2" Qest thread. Maximum Pressure: 125psi .
Part No: 30573-0003
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Water Tanks->Flexible Water Tanks
Flexible, light and form-fitting, these tanks use a PVC bladder inside a tough, abrasion-resistant nylon outer “envelope. ” Maintenance is easy because the inner bladder can be removed for cleaning and inspection. The bladder is slightly oversized so pressure is exerted on its nylon shell, rather than on the heat-welded seams. 1 1/2" 90° fill and 1/2" straight outlet fittings ready to install. Port Sizes: 1-1/2" 90° fill, 1/2" straight outlet . Vent: No .
Part No: 18031
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Water Tanks->Tournament Series Livewell Pumps
Brawniest baitwell pumps in the industry! Designed for the toughest applications, these 1600GPH (6056 L. ) Tournament Series pumps are the highest capacity 12V DC livewell pumps on the market. The 209B features a rugged bronze base and the Dual Port Pump (209FDP), with a glass-filled nylon base, allows connection to a washdown pump. These pumps have been developed to withstand the rigors of tournament fishing while supplying the volume of water required to keep bait and catch alive and healthy.
Part No: 209FDP
|
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Water Tanks->Tournament Series Livewell Pumps
Brawniest baitwell pumps in the industry! Designed for the toughest applications, these 1600GPH (6056 L. ) Tournament Series pumps are the highest capacity 12V DC livewell pumps on the market. The 209B features a rugged bronze base and the Dual Port Pump (209FDP), with a glass-filled nylon base, allows connection to a washdown pump. These pumps have been developed to withstand the rigors of tournament fishing while supplying the volume of water required to keep bait and catch alive and healthy.
Part No: 209B
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Watermakers
Protects pump and membrane from excessive exposure to silt and other suspended particulates. For use in such places as glacier bays, inland waterways, strongly brackish water and shallow waters where the bottom may be agitated.
Part No: 8012859
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Watermakers
The best-selling watermaker for cruising sailboats. Small and quiet, it can be mounted almost anywhere—simply tee into any existing seawater source such as engine intake, galley, etc. Its compact, simple design and stainless steel construction ensures reliability and low maintenance. In an emergency, the 40E can be operated manually (handle included). Weighs 25lb. Dimensions (cm): 17. 2 x 41. 9 x 39. 4 Dimensions (in): 6. 8 x 16. 5 x 15.
Part No: 8013438
|
|
|
