Top Sellers
Water Temperature Gauge, IB, SD from TELEFLEX
Light grey dial, black graduations and numerals, white pointer staff. Scratch-resistant curved glass lenses with black, near flush bezels. U. S. and metric scales with ISO symbols where appropriate.
|
Hatch Riser Arm for 20" x 20" Hatch from TAYLOR
Replacement arms for Taylor hatches from 1987 to the present. Universal arms can be left or right.
|
|
|
Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Patterned to fit basic fishing boats with bench seats. (These covers are not patterned to fit over trolling motors. ) The bow and transom corners are reinforced to protect the cover from sharp aluminum edges. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.
|
Medium Edging, White, 25' Coil, 3-1/2"H x 1-1/2"W from TAYLOR
Prevent scuffing when you dock Vinyl dock guard is specially formulated for softness and durability to protect your boat or dinghy. Each piece installs easily with screws or nails to the edge of docks, piers and floats. Material: Extruded PVC . Attachment Method: Stainless steel dock nails . Shock Absorption Mechanism: Flexible PVC .
|
T-Top Boat Cover, Center-Line Length 19'5" to 20'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
Back-to-Back Lounge Chair Seat Cover, 22"H x 50"W x 22"D from TAYLOR
Breathable rip/stop polyester fabric plus air vents provide optimum protection and ventilation for your seats, especially in hot and humid climates. Polyurethane coating on the inside prevents color transfer or bleed-through . Comes with drawstring hem . Available for most popular seat styles .
|
Rechargeable Signal Air Horn from TAYLOR
Environmentally safe air horn uses air as a propellant, instead of the traditional gas-filled designs. It's economical too. no more expensive refills to buy. Recharges in seconds with a gas station air pump, air compressor, or any other mechanical compressed air source including hand pumps. Works in all weather extremes and can safely be used or stored near sources of heat. Provides approximately 20 blasts per charge. This loud horn puts out a powerful 120db. Meets all USCG regulations.
|
84”L Fiberglass Bow from TAYLOR
Bows moounted in bow sockets are the sure and easy way to keep a boat cover taut and free from water-collecting pockets. Sockets can be mounted on any rail system or anywhere on deck wall. Rubber gasket provides snug fit for fiberglass bows. Super strong and flexible, will not take a “set”. Cut to desired length. Incude rubber end covers to grab socket.
|
Replacement Gas Strut, 12" Compressed x 20" Extended Length, 40lb. Rating from TAYLOR
Reliable gas struts incorporate a strong annealed steel rod with a special coating for added corrosion resistance. Recommended by the manufacturer for use as dock box lid supports or hatch supports. Where use as a hatch cover support is desired, we recommend you base your selection upon the recommendation of the hatch manufacturer.
|
Adjustable Lock from TAYLOR
Three-part system provides easy snap-on/snap-off fender attachment and adjustment. A stainless base mounts to your boat, into which a peg snaps to hold the fender strap (sold separately). Fixed peg requires tying a knot to secure the fender at the desired height. Adjustable peg - adjust fender height by simply pulling on the strap. Max.
|
Sully Stick Winter Mooring Buoy from TAYLOR
Extend the life of your mooring with our ice-proof stickUse this long tapered buoy in place of a standard round buoy during winter months to help prevent ice entrapment and extend the life of the mooring by protecting it from the damaging effects of freezing temperatures. Molded in eyelet at the top allows for easy retrieval and the base eyelet is reinforced with galvanized metal brushing to attach a rope and connect to the anchor chain. 80"L x 6" Dia.
|
Single Deck Chair Cover, 24"H x 24"W x 22"D from TAYLOR
Protect your seats from the elements!Heavy-duty waterproof poly/vinyl blend keeps your seats from cracking and fading. Poly/vinyl blend is softer and more pliable than traditional vinyl.
|
Fender Pump from TAYLOR
Compact, high-pressure hand pump for filling fenders, rafts, footballs, etc.
|
|
|
|
White from TAYLOR, Blue from TAYLOR, 8'' from TAYLOR
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
950
960
970
980
990
1,000
1,010
1,020
1,030
1,038
1,039
1,040
1,041
1,042
1,043
1,044
1,045
1,046
1,047
1,048
1,049
1,050
1,051
1,052
1,053
1,054
1,055
1,056
1,057
1,058
1,059
1,060
1,061
1,062
1,063
1,064
1,065
1,066
1,067
1,070
1,080
1,090
1,100
1,110
1,120
1,130
1,140
1,150
1,200
1,260
|
|
|
Home -> Interior, Flags & Gifts -> Flags & Staffs -> Flag Accessories
Charlevoix Burgee/Antenna Clips Like the Charlevoix Flag Clips, these clips are designed to allow you to fly your burgee or courtesy flag from your antenna without fear of losing it. Fits standard 1/2" burgee poles or whip antennas.
Part No: 57925
|
|
|
|
Home -> Interior, Flags & Gifts -> Flags & Staffs->Charlevoix Flag Clips
This simple one-piece clip attaches semi-permanently to your pole and keeps your flag securely in place at speeds up to 50 mph. Flags can be attached or removed in seconds The clips are also removable.
Part No: 57926
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Mooring Whips
Positions your boat a safe distance from the dockMooring whips are a safe and economical way to protect your boat from costly dockside and seawall damage. Protect your boat and dock while mooring and in areas where severe weather, high wakes, winds and tides are common. These whips, crafted from heavy-duty, solid fiberglass keep your boat away from the dock by applying continuously variable pressure while spring lines keep the boat from moving too far out of position.
Part No: MW.120
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Bumpers->Heavy Duty Dock Bumpers
The ultimate in durable docking protection. Dock Pro heavy-duty bumpers are ideal for rough conditions and are made from UV resistant, marine-grade vinyl. The straight-mount model affixes easily to flat surfaces and pilings and the corner-mount provides the same protection on right-angle sections. Both models have inflation valves for variable firmness. Material: Vinyl . Attachment Method: Screw Mount . Cross Section Shape: Molded Arch . Shock Absorption Mechanism: Air Cushion .
Part No: 45510
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->Hot Shot™ Zippered Storage Boots for Bimini BoaTops®
Boots feature one separating plastic zipper for easy on/easy off, and are made of Hot Shot™ acrylic-coated polyester fabric — a fabric that makes the boot strong yet lightweight and easy to store.
Part No: 63176OW
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Fenders
Get 4 lifetime-guaranteed fendersall in one convenient mesh bag! An exclusive special buy for our customers, these 6. 5" x 23" white fenders deliver needed protection for your boat and come together in a convenient black mesh carry bag for toting the fenders or other gear. Hull Gard fenders are a good choice for light duty in protected waters and have an oval shape that keeps them from rolling out of position.
Part No: 261023
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Dock Post Bumpers
These bumpers are designed to protect your boat from damage caused by pipe supported type docks by preventing the boat from contact with the metal dock pipe and hardware at dock level. Easily slides over 1-1/2" and 2" dock pipe and rests securely against the dock. . Molded from marine-grade vinyl with an inflation valve to adjust firmness.
Part No: 45600
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Piling Caps
Made from heavy duty polypropylene, these piling caps will discourage birds from sitting on top of your pilings.
Part No: 6200WM
|
|
|
|
The newest universal-fit boat covers from Taylor feature heavy-duty polyester fabric in two-tone colors for a unique look while fully capable of surviving the rigors of the road. Each cover includes a storage bag, tie-down straps and a support pole for a complete boat cover care system. 6. 5oz. polyester fabric with excellent mildew- and water-resistance.
Part No: 70905
|
|
|
|
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
Part No: 74203OB
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Replacement Gas Struts for Dock Boxes & Hatches
Reliable gas struts incorporate a strong annealed steel rod with a special coating for added corrosion resistance. Recommended by the manufacturer for use as dock box lid supports or hatch supports. Where use as a hatch cover support is desired, we recommend you base your selection upon the recommendation of the hatch manufacturer.
Part No: 1838
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Replacement Gas Struts for Dock Boxes & Hatches
Reliable gas struts incorporate a strong annealed steel rod with a special coating for added corrosion resistance. Recommended by the manufacturer for use as dock box lid supports or hatch supports. Where use as a hatch cover support is desired, we recommend you base your selection upon the recommendation of the hatch manufacturer.
Part No: 1864
|
|
|
|
High-quality, marine-grade mats will add spice to any deck or door. Made from plush carpet that is waterproof, stain- and fade-resistant. Mats are mold- and mildew-resistant and feature a nonskid rubber backing.
Part No: 44000
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Survivor Series Fenders
.
Part No: 857034
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Survivor Series Fenders
.
Part No: 851824
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Mooring Gear->Sur-Mark Marker Buoy
Self-righting buoy provides maximum stability in the worst conditions. Visible day or night. Add a label (below) for cautionary applications. Tough, UV-protected seamless polyethylene with a recessed, galvanized eye. Internal ballast. 10''dia. x 49''H. Base: 18''dia.
Part No: 46103
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Mooring Gear->Traditional Sur-Moor™ Mooring Buoys
Built to withstand the toughest mooring environments On traditional buoys, a shaft passes through the buoy’s center, holding together top and bottom with galvanized steel rings. The pennant from the boat attaches to the mooring chain under the buoy, never to the top ring. Polyethylene shell and closed-cell foam core.
Part No: 22171
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Tidy-Ups™ Fender Adjusters
Snap it over a lifeline or rail and adjust fender height in a jiffy. Holds fender whips securely without hard-to-untie knots. Vinyl strap with stainless hardware. For lines up to 5/8''dia.
Part No: 1016
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Super Gard™ Fenders
.
Part No: 954520
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis -> Bimini Tops->Zippered Storage Boots for Bimini BoaTops
Keep your Bimini BoaTop® neatly stored when you are not on the boat. Boots feature one separating zipper for easy on/easy off, and are made of marine vinyl to last for years.
Part No: 63164
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Fenders->Fender Cushions™
These unique rectangular cushions won't roll or ride up so they protect better than conventional fenders when boats are rafted together. Soft, flexible and durable PVC. Six molded tubes offer superior crush resistance. Hang vertically or horizontally, or use the two rows of coenter holes to tie it as a piling cushion.
Part No: 46100
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->Bimini Mount Screws
Flat heads for easy turns.
Part No: 11737
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis -> Bimini & Cover Hardware->Boat Cover Support Bows
Keep water or debris from pooling on an unsupported cover with strong and flexible bows.
Part No: 929
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Bumpers->Dock Pro™ Dock Bumpers
Take the teeth out of dock edges and sidesSave your boat from damage from dock edges and sides. Heavy-duty, marine grade vinyl bumpers provide years of superior cushioning. Solid flaps attach easily to any dock with nails or screws and finish washers (sold separately). Save your boat from damaging dock edges and sides. Heavy-duty, marine grade vinyl bumpers provide years of superior shock absorption .
Part No: 46075
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Bumpers
Impact-absorbing polyethylene cushion mounts horizontally or vertically. Pre-drilled. Galvanized fasteners included. Material: Semi-rigid polyethylene . Attachment Method: Galvanized screws (included), or use optional stainless steel dock nails. Cross-Section Shape: Rectangular . Dimensions: 4" x 6" x 48" . Shock Absorption Mechanism: Padding .
Part No: 46055
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Hatch Accessories
Includes O-rings, post and screw Fits Ultra II Powerboat hatches.
Part No: 1727
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis -> Rectangular Tarps->Blue Super Storage Covers
Get it all under wraps, away from the elements!A strong 8x10 mesh core between 3mil sheets of UV-resistant polyethylene creates a lightweight, durable protective cover for your boat or your belongings. Long-lasting 3. 4-oz. fabric, aluminum grommets and a heavy rope in the hem give these tarps extra strength. Waterproof, mildewproof, rotproof, and highly UV-resistant.
Part No: 700810
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Mooring Gear->Sur-Moor T3C Mooring Buoys
Moor securely with these highly visible buoys Hard-skin buoys feature a reflective blue band to increase visibility. The mooring chain passes through a PVC tube in the center of these buoys and must be secured to a 4" galvanized O-Ring (Model 201105) or T3C Mooring Collar using an appropriately-sized anchor shackle, all sold separately. Buoyancy is provided by closed-cell foam protected by a polyethylene shell . Three-year warranty .
Part No: 46372
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Hull Gard® Inflatable Vinyl Fenders
Hull Gard Fenders stay put and won't roll out of position! The finest utility fender on the market, and a good choice for light duty in protected waters, Hull Gard features a unique oval design which prevents the fender from rolling out of position. The Hull Gard combines unsurpassed softness and superior strength to provide the maximum protection available from a utility fender.
Part No: 1022
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Fenders->Tuff End™ Round Fenders
Tough enough to meet the punishing demands of the commercial marine industry Tuff End buoys feature heavy duty seamless construction to meet the punishing demands of the commercial marine industry. The curved design hole prevents chafing. Compressor or football needle valve inflation. Made from thick-walled marine grade vinyl for durability. Injection molded ends for high strength. Trivalve for easy inflation with football needle or compressor. Great for larger boats or rafting! .
Part No: 1152
|
|
|