Top Sellers
|
|
Adjustable Lock from TAYLOR
Three-part system provides easy snap-on/snap-off fender attachment and adjustment. A stainless base mounts to your boat, into which a peg snaps to hold the fender strap (sold separately). Fixed peg requires tying a knot to secure the fender at the desired height. Adjustable peg - adjust fender height by simply pulling on the strap. Max.
|
Medium Edging, White, 25' Coil, 3-1/2"H x 1-1/2"W from TAYLOR
Prevent scuffing when you dock Vinyl dock guard is specially formulated for softness and durability to protect your boat or dinghy. Each piece installs easily with screws or nails to the edge of docks, piers and floats. Material: Extruded PVC . Attachment Method: Stainless steel dock nails . Shock Absorption Mechanism: Flexible PVC .
|
84”L Fiberglass Bow from TAYLOR
Bows moounted in bow sockets are the sure and easy way to keep a boat cover taut and free from water-collecting pockets. Sockets can be mounted on any rail system or anywhere on deck wall. Rubber gasket provides snug fit for fiberglass bows. Super strong and flexible, will not take a “set”. Cut to desired length. Incude rubber end covers to grab socket.
|
Replacement Gas Strut, 12" Compressed x 20" Extended Length, 40lb. Rating from TAYLOR
Reliable gas struts incorporate a strong annealed steel rod with a special coating for added corrosion resistance. Recommended by the manufacturer for use as dock box lid supports or hatch supports. Where use as a hatch cover support is desired, we recommend you base your selection upon the recommendation of the hatch manufacturer.
|
T-Top Boat Cover, Center-Line Length 20'5" to 21'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
Welcome Aboard Mat, Navy, 18" X 30" from TAYLOR
High-quality, marine-grade mats will add spice to any deck or door. Made from plush carpet that is waterproof, stain- and fade-resistant. Mats are mold- and mildew-resistant and feature a nonskid rubber backing.
|
Sully Stick Winter Mooring Buoy from TAYLOR
Extend the life of your mooring with our ice-proof stickUse this long tapered buoy in place of a standard round buoy during winter months to help prevent ice entrapment and extend the life of the mooring by protecting it from the damaging effects of freezing temperatures. Molded in eyelet at the top allows for easy retrieval and the base eyelet is reinforced with galvanized metal brushing to attach a rope and connect to the anchor chain. 80"L x 6" Dia.
|
Single Deck Chair Cover, 24"H x 24"W x 22"D from TAYLOR
Protect your seats from the elements!Heavy-duty waterproof poly/vinyl blend keeps your seats from cracking and fading. Poly/vinyl blend is softer and more pliable than traditional vinyl.
|
Fender Pump from TAYLOR
Compact, high-pressure hand pump for filling fenders, rafts, footballs, etc.
|
|
|
T-Top Boat Cover, Center-Line Length 19'5" to 20'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
Windshield Support Bar, 13" from TAYLOR
Top-quality support bars are original equipment on many walk-thru windshields. Anodized aluminum tubing with nylon fittings, which pivot in almost any direction for easy installation.
|
Back-to-Back Lounge Chair Seat Cover, 22"H x 50"W x 22"D from TAYLOR
Breathable rip/stop polyester fabric plus air vents provide optimum protection and ventilation for your seats, especially in hot and humid climates. Polyurethane coating on the inside prevents color transfer or bleed-through . Comes with drawstring hem . Available for most popular seat styles .
|
Pontoon Captain's Stand, 33"H x 26"W x 19"D from TAYLOR
Protect your seats from the elements!Heavy-duty waterproof poly/vinyl blend keeps your seats from cracking and fading. Poly/vinyl blend is softer and more pliable than traditional vinyl.
|
|
White from TAYLOR, Fixed from TAYLOR, Orange from TAYLOR
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
960
970
980
990
1,000
1,010
1,020
1,030
1,040
1,045
1,046
1,047
1,048
1,049
1,050
1,051
1,052
1,053
1,054
1,055
1,056
1,057
1,058
1,059
1,060
1,061
1,062
1,063
1,064
1,065
1,066
1,067
1,068
1,069
1,070
1,071
1,072
1,073
1,074
1,080
1,090
1,100
1,110
1,120
1,130
1,140
1,150
1,200
1,260
|
|
|
Home -> Seating & Covers -> Covers & Biminis->Blue Super Storage Covers
Get it all under wraps, away from the elements!A strong 8x10 mesh core between 3mil sheets of UV-resistant polyethylene creates a lightweight, durable protective cover for your boat or your belongings. Long-lasting 3. 4-oz. fabric, aluminum grommets and a heavy rope in the hem give these tarps extra strength. Waterproof, mildewproof, rotproof, and highly UV-resistant.
Part No: 702540
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Fenders->Tuff End™ Round Fenders
Tough enough to meet the punishing demands of the commercial marine industry Tuff End buoys feature heavy duty seamless construction to meet the punishing demands of the commercial marine industry. The curved design hole prevents chafing. Compressor or football needle valve inflation. Made from thick-walled marine grade vinyl for durability. Injection molded ends for high strength. Trivalve™ for easy inflation with football needle or compressor. Great for larger boats or rafting! .
Part No: 61140
|
|
|
|
Silver gray 11-oz. poly/cotton fabric is water repellent and mildew resistant. Covers feature bound edges, draw-rope in hem and they're cut to fit close for trailering.
Part No: 926555
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Fenders->Tuff End™ Round Fenders
Tough enough to meet the punishing demands of the commercial marine industry Tuff End buoys feature heavy duty seamless construction to meet the punishing demands of the commercial marine industry. The curved design hole prevents chafing. Compressor or football needle valve inflation. Made from thick-walled marine grade vinyl for durability. Injection molded ends for high strength. Trivalve™ for easy inflation with football needle or compressor. Great for larger boats or rafting! .
Part No: 61149
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Hatch Accessories->Hatch Riser Arms
Replacement arms for Taylor hatches from 1987 to the present. Universal arms can be left or right.
Part No: 1722
|
|
|
|
Patterned to fit basic fishing boats with bench seats. (These covers are not patterned to fit over trolling motors. ) The bow and transom corners are reinforced to protect the cover from sharp aluminum edges. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.
Part No: 86016
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Hatch Accessories
Secure windshield doors and prevent excess rattling at high speeds. A simple twist holds door firmly in place. Black thermoplastic. Self-tap screws. Two per pack.
Part No: 1162
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Dock & Post Bumpers
Closed-cell foam encased in a soft fabric cover protects your boat against contact damage. Unlike traditional vinyl or rubber, it won't squeak or mar, and the high-density foam will never leak or become flat. Polyester cover is UV-, mildew-, dirt- and abrasion- resistant. Cleans easily. Flexible enough to mount on curves or around corners. Material: Polyester/Foam . Attachment Method: Mounting tabs/fasteners . Cross Section Shape: Semi-circular . Shock Absorption Mechanism: Foam Padding .
Part No: DB3.60
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Big B™ Fenders
Center Rope Tube for versatilityThe versatile Big B™ Fender incorporates an integral 3/4"dia. Center Rope Tube that allows end-to-end line passage. It can be hung vertically or horizontally with a single line. Big B fenders feature seamless construction, with molded ribs to minimize roll. Big B's are made from the highest quality marine grade vinyl with a high gloss finish. Features a football needle valve for precise air pressure regulation. center hole accepts up to 5/8"dia.
Part No: 531025
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Survivor Series Fenders
.
Part No: 857824
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Bumpers->Dock Pro™ Inflatable Dock Wheels
Smooth rolling wheels fend your vessel away from the dock. Molded-in standard-needle inflation valves let you adjust firmness. Hot dip galvanized hardware. Strong, 2"dia. axle housing on the 12" and 18" model, and 3/4" dia. axle housing on the 9" model. Material: Vinyl. Attachment Method: Galvanized hardware. Shock Absoption Mechanism: Inflated vinyl bumper.
Part No: 1073
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Fender Accessories
No need for knots in your fender lines. No knot HD marine nylon fender hanger keeps fenders in place with a simple system.
Part No: 1105
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Piling Caps
Made from heavy duty polypropylene, these piling caps will discourage birds from sitting on top of your pilings.
Part No: 6202WM
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Hatch Accessories->Stainless-Steel Gas Struts for Dock Boxes & Hatches
Made of corrosion resistant 316 stainless steel for extended service in demanding marine environments. Recommended by the manufacturer for use as dock box lid supports or hatch supports. Where use as a hatch cover support is desired, we recommend you base your selection upon the recommendation of the hatch manufacturer.
Part No: 1848
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Gas Lift Support Accessories
Gas Lift Support Accessories.
Part No: 1857
|
|
|
|
Protect your seats from the elements!Heavy-duty waterproof poly/vinyl blend keeps your seats from cracking and fading. Poly/vinyl blend is softer and more pliable than traditional vinyl.
Part No: 40240
|
|
|
|
|
Protect your seats from the elements!Heavy-duty waterproof poly/vinyl blend keeps your seats from cracking and fading. Poly/vinyl blend is softer and more pliable than traditional vinyl.
Part No: 40420
|
|
|
|
|
Protect your seats from the elements!Heavy-duty waterproof poly/vinyl blend keeps your seats from cracking and fading. Poly/vinyl blend is softer and more pliable than traditional vinyl.
Part No: 40248
|
|
|
|
The newest universal-fit boat covers from Taylor feature heavy-duty polyester fabric in two-tone colors for a unique look while fully capable of surviving the rigors of the road. Each cover includes a storage bag, tie-down straps and a support pole for a complete boat cover care system. 6. 5oz. polyester fabric with excellent mildew- and water-resistance.
Part No: 70907
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Bumpers->EPDM Rubber Dock Guards
Protect your boat and dock with this new line of EPDM rubber dock edging. EPDM rubber is designed to withstand the most extreme environments and is soft enough to cushion your boat from the dock or pier. It’s softer than vinyl and stays flexible when exposed to UV, offering uncompromising longevity. Choose from five different profiles for protection where you need it most. Attachment Method: Stainless steel dock nails (sold separately). Shock Absorption Mechanism: EPDM Rubber.
Part No: 96038
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Bridle Plate Mooring System
This mooring attachment system allows you to easily attach up to three lines from the mooring to your boat. The system maintains mooring line separation to minimize chafe and increase line life. No more tangled mooring lines! Multihull systems use three lines to the boat and Monohull systems use two lines to the boat. There are two systems available for both types of boats: one with shackle attachment points and one with safety shackles and swivel for ease of use. Breaking Strength: 32,000lb.
Part No: 33050S
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Mooring Whips
Positions your boat a safe distance from the dockMooring whips are a safe and economical way to protect your boat from costly dockside and seawall damage. Protect your boat and dock while mooring and in areas where severe weather, high wakes, winds and tides are common. These whips, crafted from heavy-duty, solid fiberglass keep your boat away from the dock by applying continuously variable pressure while spring lines keep the boat from moving too far out of position.
Part No: MW.160
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Tuff End™ Oval Fenders
Tuff End fenders are for heavy duty marine applications. Constructed from the same flexible, resilient vinyl as our Super Gard, Big B, and Hull Gard fenders, the end in each Tuff End is injection molded for extra strength and reliability. Tuff Ends are designed to perform under the most demanding conditions. Fender eyes are injection molded vinyl . Eyes are tested to 2000 psi tensile strength, the strongest in the industry!.
Part No: 1191
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Tuff End™ Oval Fenders
Tuff End fenders are for heavy duty marine applications. Constructed from the same flexible, resilient vinyl as our Super Gard, Big B, and Hull Gard fenders, the end in each Tuff End is injection molded for extra strength and reliability. Tuff Ends are designed to perform under the most demanding conditions. Fender eyes are injection molded vinyl . Eyes are tested to 2000 psi tensile strength, the strongest in the industry!.
Part No: 1193
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->Bimini Support Poles (Pr)
Keep your Bimini up off the gunwales when not in use. A pair of support poles replaces aft tensioning straps. 377820 Adjusts from 28''-48". 271380 is 40" fixed .
Part No: 11989
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Dock & Post Bumpers
.
Part No: DB3.90
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Hull Gard® Inflatable Vinyl Fenders
Hull Gard Fenders stay put and won't roll out of position! The finest utility fender on the market, and a good choice for light duty in protected waters, Hull Gard features a unique oval design which prevents the fender from rolling out of position. The Hull Gard combines unsurpassed softness and superior strength to provide the maximum protection available from a utility fender.
Part No: 1024
|
|
|
|
|
.
Part No: 74720OT
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Piling Caps
Made from heavy duty polypropylene, these piling caps will discourage birds from sitting on top of your pilings.
Part No: 6204WM
|
|
|
|
Home -> Interior, Flags & Gifts -> Flags & Staffs -> Flag Accessories->Stainless Steel Flag Poles
Stainless steel flagstaffs always look grand Quality stainless-steel flag poles clamp or socket mount to fly your colors. Lengths from 18" to 48. " An excellent non-corroding staff for displaying ensigns, courtesy flags and more.
Part No: 905
|
|
|
