Top Sellers
Water Temperature Gauge, IB, SD from TELEFLEX
Light grey dial, black graduations and numerals, white pointer staff. Scratch-resistant curved glass lenses with black, near flush bezels. U. S. and metric scales with ISO symbols where appropriate.
|
Hatch Riser Arm for 20" x 20" Hatch from TAYLOR
Replacement arms for Taylor hatches from 1987 to the present. Universal arms can be left or right.
|
|
|
Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Patterned to fit basic fishing boats with bench seats. (These covers are not patterned to fit over trolling motors. ) The bow and transom corners are reinforced to protect the cover from sharp aluminum edges. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.
|
T-Top Boat Cover, Center-Line Length 20'5" to 21'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
T-Top Boat Cover, Center-Line Length 19'5" to 20'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
Fleece Fender Cover, Fits Fenders 10" x 26", Black from TAYLOR
Perfect for use with Big B and other center-tube style fenders, these 100% polyester fleece covers will provide posh protection for your boat! Made of rugged, 12-ounce Blizzard fleece, they are UV- light and tear-resistant. The draw string hem enables adjustment for a snug fit and also permits removal for washing.
|
|
|
Single Deck Chair Cover, 24"H x 24"W x 22"D from TAYLOR
Protect your seats from the elements!Heavy-duty waterproof poly/vinyl blend keeps your seats from cracking and fading. Poly/vinyl blend is softer and more pliable than traditional vinyl.
|
Back-to-Back Lounge Chair Seat Cover, 22"H x 50"W x 22"D from TAYLOR
Breathable rip/stop polyester fabric plus air vents provide optimum protection and ventilation for your seats, especially in hot and humid climates. Polyurethane coating on the inside prevents color transfer or bleed-through . Comes with drawstring hem . Available for most popular seat styles .
|
84”L Fiberglass Bow from TAYLOR
Bows moounted in bow sockets are the sure and easy way to keep a boat cover taut and free from water-collecting pockets. Sockets can be mounted on any rail system or anywhere on deck wall. Rubber gasket provides snug fit for fiberglass bows. Super strong and flexible, will not take a “set”. Cut to desired length. Incude rubber end covers to grab socket.
|
Replacement Gas Strut, 12" Compressed x 20" Extended Length, 40lb. Rating from TAYLOR
Reliable gas struts incorporate a strong annealed steel rod with a special coating for added corrosion resistance. Recommended by the manufacturer for use as dock box lid supports or hatch supports. Where use as a hatch cover support is desired, we recommend you base your selection upon the recommendation of the hatch manufacturer.
|
Gunnel Guard - 1/2" Round, 1-1/2" Diameter, 20' Length from TAYLOR
These polyester-covered guards will protect your boat from dings and scratches and they won’t rot in the sun or saltwater like cotton guards. Great for use on dinghies and swim platforms, too. Fabric tabs attach easily with screws or nails. Half Round is for flat surfaces; 3/4 Round is for 90° edges. Sold in 10' or 20' lengths or by the foot up to 50'. Material: Polyester fabric/closed-cell foam . Attachment Method: Screws or nails . Shock Absorption Mechanism: Foam padding .
|
Medium Edging, White, 25' Coil, 3-1/2"H x 1-1/2"W from TAYLOR
Prevent scuffing when you dock Vinyl dock guard is specially formulated for softness and durability to protect your boat or dinghy. Each piece installs easily with screws or nails to the edge of docks, piers and floats. Material: Extruded PVC . Attachment Method: Stainless steel dock nails . Shock Absorption Mechanism: Flexible PVC .
|
Pontoon Captain's Stand, 33"H x 26"W x 19"D from TAYLOR
Protect your seats from the elements!Heavy-duty waterproof poly/vinyl blend keeps your seats from cracking and fading. Poly/vinyl blend is softer and more pliable than traditional vinyl.
|
|
from TAYLOR, Cover from TAYLOR, White from TAYLOR, Blue from TAYLOR
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
960
970
980
990
1,000
1,010
1,020
1,030
1,040
1,050
1,051
1,052
1,053
1,054
1,055
1,056
1,057
1,058
1,059
1,060
1,061
1,062
1,063
1,064
1,065
1,066
1,067
1,068
1,069
1,070
1,071
1,072
1,073
1,074
1,075
1,076
1,077
1,078
1,079
1,080
1,090
1,100
1,110
1,120
1,130
1,140
1,150
1,160
1,200
1,260
|
|
|
.
Part No: 93077
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->Bimini Jaw Slides
Nylon, sold in pairs, black or white.
Part No: 11711
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Tidy Ups Line Holders
Durable, UV-resistant vinyl straps let you hang almost anything from lifelines or rails. D-ring makes a great tie-off for fenders. Standard rail model snaps onto rails to 1"diameter.
Part No: 1019
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Fenders->Tuff End™ Round Fenders
Tough enough to meet the punishing demands of the commercial marine industry Tuff End buoys feature heavy duty seamless construction to meet the punishing demands of the commercial marine industry. The curved design hole prevents chafing. Compressor or football needle valve inflation. Made from thick-walled marine grade vinyl for durability. Injection molded ends for high strength. Trivalve™ for easy inflation with football needle or compressor. Great for larger boats or rafting! .
Part No: 1143
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis -> Bimini & Cover Hardware->Boat Cover Support Bows
Keep water or debris from pooling on an unsupported cover with strong and flexible bows.
Part No: 934
|
|
|
|
Home -> Cabinet & Deck Hardware -> Windshields->Windshield Support Bars
Top-quality support bars are original equipment on many walk-thru windshields. Anodized aluminum tubing with nylon fittings, which pivot in almost any direction for easy installation.
Part No: 1636
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Bumpers->Dock Pro™ Corner Mount Inflatable Dock Wheels
Smooth rolling wheels fend your vessel away from the dock. Molded-in standard-needle inflation valves let you adjust firmness. Hot dip galvanized hardware. Strong, 2"dia. axle housing on the 12" and 18" model, and 3/4" dia. axle housing on the 9" model. Material: Vinyl. Attachment Method: Galvanized hardware. Shock Absoption Mechanism: Inflated vinyl bumper.
Part No: 1081
|
|
|
|
Patterned towards high-powered, flat-wake designed, competition ski boats built with elongated cockpits. A windshield and a ski-tow bar make up the two dominant features projecting above the deck. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.
Part No: 76828
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->Grommet Set: Tool and Extra Grommets
Set contains hole punch, setting tool, and 18 #2 brass grommets and washers.
Part No: 1365
|
|
|
|
.
Part No: 46186
|
|
|
|
Protect your seats from the elements!Heavy-duty waterproof poly/vinyl blend keeps your seats from cracking and fading. Poly/vinyl blend is softer and more pliable than traditional vinyl.
Part No: 40245
|
|
|
|
RU 3MAN ECONOMY INFL CVR, WHT|RU 3MAN ECONOMY INFL CVR, WHT.
Part No: 70115E
|
|
|
|
|
**98-05SUGRSND TAN 2+4 DC JT P.
Part No: 66218UB
|
|
|
|
These durable lightweight covers are ideal for protection on the mooring or in storage (not meant for trailering). Features a 70-Denier lightweight polyester fabric that’s the perfect blend of economy and simplicity.
Part No: 70286
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Hull Gard® Inflatable Vinyl Fenders
Hull Gard Fenders stay put and won't roll out of position! The finest utility fender on the market, and a good choice for light duty in protected waters, Hull Gard features a unique oval design which prevents the fender from rolling out of position. The Hull Gard combines unsurpassed softness and superior strength to provide the maximum protection available from a utility fender.
Part No: 91022
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Replacement Gas Struts for Dock Boxes & Hatches
Reliable gas struts incorporate a strong annealed steel rod with a special coating for added corrosion resistance. Recommended by the manufacturer for use as dock box lid supports or hatch supports. Where use as a hatch cover support is desired, we recommend you base your selection upon the recommendation of the hatch manufacturer.
Part No: 1830
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Replacement Gas Struts for Dock Boxes & Hatches
Reliable gas struts incorporate a strong annealed steel rod with a special coating for added corrosion resistance. Recommended by the manufacturer for use as dock box lid supports or hatch supports. Where use as a hatch cover support is desired, we recommend you base your selection upon the recommendation of the hatch manufacturer.
Part No: 1832
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Big B™ Fenders
Center Rope Tube for versatility The versatile Big B™ Fender incorporates an integral 3/4"dia. It can be hung vertically or horizontally with a single line. Horizontal hanging is useful protection against pilings, awkward docking situations, and tidal change areas. Big B fenders feature seamless construction, with molded ribs to minimize roll. Features a football needle valve for precise air pressure regulation. Available in four diameters to fit a full range of boat sizes.
Part No: 541032
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Survivor Series Fenders
.
Part No: 850622
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Survivor Series Fenders
.
Part No: 851128
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis -> Bimini Tops->White Vinyl Bimini Tops - 6L X 42H
Shield yourself from the relentless rays of the sun and make your boating more enjoyable with these high-quality, affordable Bimini tops. They are constructed from waterproof, mildew and UV-resistant marine grade white vinyl. Our BoaTop® kits include everything you need for a custom installation including the folding framework, the fabric top, all mounting hardware, and complete instructions. Free Adjustable Bimini Support Pole - View Details. Optional matching storage boot sold separately .
Part No: 62170
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Bumpers->Removable Post Bumpers
Portable protection that stays in place better than fenders. Polyester webbing and Delrin buckles permit quick attachment to threatening posts at unprotected and unfamiliar docks. 3'L. Material: Polyester fabric/closed-cell foam . Attachment Method: Polyester webbing, delrin buckles . Cross Section: D-shape . Shock Absorption Mechanism: Foam padding .
Part No: RPB3.30
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->Boat Cover Repair and Reinforcement Material
Reinforcement material is 1 square yard of tough vinyl for protection from tears in high risk areas Adhesive included.
Part No: 67681
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Big B™ Fenders
Center Rope Tube for versatility The versatile Big B™ Fender incorporates an integral 3/4"dia. It can be hung vertically or horizontally with a single line. Horizontal hanging is useful protection against pilings, awkward docking situations, and tidal change areas. Big B fenders feature seamless construction, with molded ribs to minimize roll. Features a football needle valve for precise air pressure regulation. Available in four diameters to fit a full range of boat sizes.
Part No: 41026
|
|
|
|
Patterned to fit V-Hull offshore fishing boats with large open cockpits, center-steering consoles, high bow rails and short windscreens. Outboard models are made to cover a single outboard. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.
Part No: 85219
|
|
|
|
Silver gray 11-oz. poly/cotton fabric is water repellent and mildew resistant. Covers feature bound edges, draw-rope in hem and they're cut to fit close for trailering.
Part No: 926111
|
|
|
|
Home -> Cordage -> Anchor Line & Dock Line -> Chafe Gear and Snubbers->Removable Chafe Guards
A removable version of original Perimeter chafe guards with hook-and-loop closures for easy removal. Ideal for anchor lines where you may not have access to the bitter end. Sold individually.
Part No: RCG1.14
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis -> Bimini & Cover Hardware->Bimini Slide Assemblies
Mount your Bimini top on sliding track. Chrome slide assemblies fit most deck hinges. Sold with white nylon slides.
Part No: 993018
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Tidy-Ups™ Fender Adjusters
Snap it over a lifeline or rail and adjust fender height in a jiffy. Holds fender whips securely without hard-to-untie knots. Vinyl strap with stainless hardware. For lines up to 5/8''dia.
Part No: 1018
|
|
|
|
|
.
Part No: 71226
|
|
|
