Required Waste/Oil Garbage Placards from WEST MARINE
Get ready for a Coast Guard inspection with required plaquesCoast Guard regulations require these plaques to be displayed on any boat 26' feet and over with an enclosed engine compartment. Adhesive backing. Easy to apply. White text on black background.

Hatch Riser Arm for 20" x 20" Hatch from TAYLOR
Replacement arms for Taylor hatches from 1987 to the present. Universal arms can be left or right.

Replacement Hatch Handle, 1987–1993 from TAYLOR
Replacement handles for Taylor hatches from 1987 to the present. Includes O-rings, post and screw.

10mm Ball Stud pair from TAYLOR
Taylor 10mm Ball Stud pair.

Boat Vent II from TAYLOR
The newest in boat cover venting and support Don't let your interior suffer from mold and mildew damage. The patented Boat Vent II installs quickly and easily, with no screws or fasteners. The venting area provides for greater volume of exhaust air while closing the top to bottom gap - keeping water out!. The Boat Vent II is manufactured from a superior grade polycarbonate blend material for strength and UV resistance and will accommodate either 3/4" or 7/8" support poles.

12" Dia. Straight Mount Inflatable Dock Wheel from TAYLOR
Smooth rolling wheels fend your vessel away from the dock. Molded-in standard-needle inflation valves let you adjust firmness. Hot dip galvanized hardware. Strong, 2"dia. axle housing on the 12" and 18" model, and 3/4" dia. axle housing on the 9" model. Material: Vinyl. Attachment Method: Galvanized hardware. Shock Absoption Mechanism: Inflated vinyl bumper.

Adjustable Lock from TAYLOR
Three-part system provides easy snap-on/snap-off fender attachment and adjustment. A stainless base mounts to your boat, into which a peg snaps to hold the fender strap (sold separately). Fixed peg requires tying a knot to secure the fender at the desired height. Adjustable peg - adjust fender height by simply pulling on the strap. Max.

Extra Peg for Standard Lock from TAYLOR
Three-part system provides easy snap-on/snap-off fender attachment and adjustment. A stainless base mounts to your boat, into which a peg snaps to hold the fender strap (sold separately). Fixed peg requires tying a knot to secure the fender at the desired height. Adjustable peg - adjust fender height by simply pulling on the strap. Max.

Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Patterned to fit basic fishing boats with bench seats. (These covers are not patterned to fit over trolling motors. ) The bow and transom corners are reinforced to protect the cover from sharp aluminum edges. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.

Rechargeable Signal Air Horn from TAYLOR
Environmentally safe air horn uses air as a propellant, instead of the traditional gas-filled designs. It's economical too. no more expensive refills to buy. Recharges in seconds with a gas station air pump, air compressor, or any other mechanical compressed air source including hand pumps. Works in all weather extremes and can safely be used or stored near sources of heat. Provides approximately 20 blasts per charge. This loud horn puts out a powerful 120db. Meets all USCG regulations.

84”L Fiberglass Bow from TAYLOR
Bows moounted in bow sockets are the sure and easy way to keep a boat cover taut and free from water-collecting pockets. Sockets can be mounted on any rail system or anywhere on deck wall. Rubber gasket provides snug fit for fiberglass bows. Super strong and flexible, will not take a “set”. Cut to desired length. Incude rubber end covers to grab socket.

Replacement Gas Strut, 12" Compressed x 20" Extended Length, 40lb. Rating from TAYLOR
Reliable gas struts incorporate a strong annealed steel rod with a special coating for added corrosion resistance. Recommended by the manufacturer for use as dock box lid supports or hatch supports. Where use as a hatch cover support is desired, we recommend you base your selection upon the recommendation of the hatch manufacturer.

T-Top Boat Cover, Center-Line Length 20'5" to 21'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.

Welcome Aboard Mat, Navy, 18" X 30" from TAYLOR
High-quality, marine-grade mats will add spice to any deck or door. Made from plush carpet that is waterproof, stain- and fade-resistant. Mats are mold- and mildew-resistant and feature a nonskid rubber backing.

Sully Stick Winter Mooring Buoy from TAYLOR
Extend the life of your mooring with our ice-proof stickUse this long tapered buoy in place of a standard round buoy during winter months to help prevent ice entrapment and extend the life of the mooring by protecting it from the damaging effects of freezing temperatures. Molded in eyelet at the top allows for easy retrieval and the base eyelet is reinforced with galvanized metal brushing to attach a rope and connect to the anchor chain. 80"L x 6" Dia.