Top Sellers
Safe-T Quick System with 16' Cable from TELEFLEX
Rotary three-turn steering kit with a quick connect cable set up to cut down on installation time. This system works on most boats with power steering assist, inboards and small outboards under 50hp where NFB isn't required. Boat Type: Virtually all power-assisted outboard, stern drive, and inboard boats . Steering Type: Rotary . Turns Lock-to-Lock: 3 . Dimensions: 4-7/8"D behind dash front x 6-7/8"W x 5-5/16"H . Steering Wheel: Up to 16". Not included .
|
Economy Deck Plates - 4" from WEST MARINE
These screw-in plates are made from durable polyethylene. The tight O-ring seal prevents water leakage. Large cover and flange threads catch quickly and screw-in easily. Dimensions for 4" deck plate: Cutout: 4 1/2". Flange diameter: 5 3/4". Dimensions for 6" deck plate: Cutout: 6 1/2".
|
1x19 Wire Lifeline Kit with Gate Included from SUNCOR
Innovative lifeline kits feature Quick Attach™ compression fittings that make rigging lifelines yourself easier, with no need to peel wires apart. Fittings are precision machined from 316 stainless steel and are certified with a break strength greater than the wire itself. Each Kit includes 40' of 3/16" wire (choose PVC coated (5/16"), or uncoated) and two turnbuckles with toggle.
|
PVC-Coated Wire Lifeline Kit without Gate from SUNCOR
Innovative lifeline kits feature Quick Attach™ compression fittings that make rigging lifelines yourself easier, with no need to peel wires apart. Fittings are precision machined from 316 stainless steel and are certified with a break strength greater than the wire itself. Each Kit includes 40' of 3/16" wire (choose PVC coated (5/16"), or uncoated) and two turnbuckles with toggle.
|
1x19 Wire Lifeline Kit without Gate from SUNCOR
Innovative lifeline kits feature Quick Attach™ compression fittings that make rigging lifelines yourself easier, with no need to peel wires apart. Fittings are precision machined from 316 stainless steel and are certified with a break strength greater than the wire itself. Each Kit includes 40' of 3/16" wire (choose PVC coated (5/16"), or uncoated) and two turnbuckles with toggle.
|
PVC-Coated Wire Lifeline Kit with Gate Included from SUNCOR
Innovative lifeline kits feature Quick Attach™ compression fittings that make rigging lifelines yourself easier, with no need to peel wires apart. Fittings are precision machined from 316 stainless steel and are certified with a break strength greater than the wire itself. Each Kit includes 40' of 3/16" wire (choose PVC coated (5/16"), or uncoated) and two turnbuckles with toggle.
|
Anchor Rode, 20' x 5/16" Chain + 200' x 9/16" Rope from SUNCOR
Quality premade rodes feature Suncor’s BBB chain and Yale’s premium three-strand twist for a rugged, durable combination at a fraction of the cost of custom rode.
|
Anchor Rode, 15' x 5/16" Chain + 150' x 9/16" Rope from SUNCOR
Quality premade rodes feature Suncor’s BBB chain and Yale’s premium three-strand twist for a rugged, durable combination at a fraction of the cost of custom rode.
|
Safe-T Quick System with 8' Cable from TELEFLEX
Rotary three-turn steering kit with a quick connect cable set up to cut down on installation time. This system works on most boats with power steering assist, inboards and small outboards under 50hp where NFB isn't required. Boat Type: Virtually all power-assisted outboard, stern drive, and inboard boats . Steering Type: Rotary . Turns Lock-to-Lock: 3 . Dimensions: 4-7/8"D behind dash front x 6-7/8"W x 5-5/16"H . Steering Wheel: Up to 16". Not included .
|
Safe-T Quick System with 17' Cable from TELEFLEX
Rotary three-turn steering kit with a quick connect cable set up to cut down on installation time. This system works on most boats with power steering assist, inboards and small outboards under 50hp where NFB isn't required. Boat Type: Virtually all power-assisted outboard, stern drive, and inboard boats . Steering Type: Rotary . Turns Lock-to-Lock: 3 . Dimensions: 4-7/8"D behind dash front x 6-7/8"W x 5-5/16"H . Steering Wheel: Up to 16". Not included .
|
Safe-T Quick System with 12' Cable from TELEFLEX
Rotary three-turn steering kit with a quick connect cable set up to cut down on installation time. This system works on most boats with power steering assist, inboards and small outboards under 50hp where NFB isn't required. Boat Type: Virtually all power-assisted outboard, stern drive, and inboard boats . Steering Type: Rotary . Turns Lock-to-Lock: 3 . Dimensions: 4-7/8"D behind dash front x 6-7/8"W x 5-5/16"H . Steering Wheel: Up to 16". Not included .
|
Safe-T Quick System with 18' Cable from TELEFLEX
Rotary three-turn steering kit with a quick connect cable set up to cut down on installation time. This system works on most boats with power steering assist, inboards and small outboards under 50hp where NFB isn't required. Boat Type: Virtually all power-assisted outboard, stern drive, and inboard boats . Steering Type: Rotary . Turns Lock-to-Lock: 3 . Dimensions: 4-7/8"D behind dash front x 6-7/8"W x 5-5/16"H . Steering Wheel: Up to 16". Not included .
|
Safe-T Quick System with 14' Cable from TELEFLEX
Rotary three-turn steering kit with a quick connect cable set up to cut down on installation time. This system works on most boats with power steering assist, inboards and small outboards under 50hp where NFB isn't required. Boat Type: Virtually all power-assisted outboard, stern drive, and inboard boats . Steering Type: Rotary . Turns Lock-to-Lock: 3 . Dimensions: 4-7/8"D behind dash front x 6-7/8"W x 5-5/16"H . Steering Wheel: Up to 16". Not included .
|
2-3/4" Overall L, 9/16" Upper Eye ID, 11/32" Swivel ID from WICHARD
Drop forged from high-resistance 17-4 stainless for great strength. Quick-release design opens easily under load with the included lanyard.
|
Safe-T Quick System with 13' Cable from TELEFLEX
Rotary three-turn steering kit with a quick connect cable set up to cut down on installation time. This system works on most boats with power steering assist, inboards and small outboards under 50hp where NFB isn't required. Boat Type: Virtually all power-assisted outboard, stern drive, and inboard boats . Steering Type: Rotary . Turns Lock-to-Lock: 3 . Dimensions: 4-7/8"D behind dash front x 6-7/8"W x 5-5/16"H . Steering Wheel: Up to 16". Not included .
|
|
Quick Attach Stud, 16" Thread from SUNCOR, 4" Thread from SUNCOR
|
This site contains about 39,562 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
980
990
1,000
1,010
1,020
1,030
1,040
1,050
1,060
1,065
1,066
1,067
1,068
1,069
1,070
1,071
1,072
1,073
1,074
1,075
1,076
1,077
1,078
1,079
1,080
1,081
1,082
1,083
1,084
1,085
1,086
1,087
1,088
1,089
1,090
1,091
1,092
1,093
1,094
1,100
1,110
1,120
1,130
1,140
1,150
1,160
1,170
1,200
1,300
1,319
|
|
|
Cordage -> Rigging Products->Quick Attach™ Stud & Jaw Turnbuckles
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud and Jaw Turnbuckle mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0765-0703
|
|
|
|
Cordage -> Rigging Products->Quick Attach™ Stud & Jaw Turnbuckles
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud and Jaw Turnbuckle mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0765-0904
|
|
|
Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0775-1208
|
|
|
Cordage -> Rigging Products->Quick Attach™ Toggle Swage Fittings
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Toggle mechanical swage fitting allows a self-aligning capability for a more flexible connection such as boat lifelines. Quick Attach fittings allow very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools.
Part No: C0778-1309
|
|
|
|
Cordage -> Rigging Products->Quick Attach™ Toggle Swage Fittings
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Toggle mechanical swage fitting allows a self-aligning capability for a more flexible connection such as boat lifelines. Quick Attach fittings allow very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools.
Part No: C0778-1007
|
|
|
|
Cordage -> Rigging Products->Quick Attach™ Stud & Jaw Turnbuckles
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud and Jaw Turnbuckle mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0765-1309
|
|
|
Cordage -> Rigging Products -> Rigging Terminals->Quick Attach™ Stud & Toggle Turnbuckles
Fittings are precision machined from 316 stainless steel Holding power of at least 90% of the maximum breakload of the wire rope used The wire will always break before the fitting even gets distorted Very fast attachment to any type of cable (1x19, 7x19, or 7x7) using only simple tools.
Part No: C0764-0704
|
|
|
|
Cordage -> Rigging Products->Quick Attach™ Toggle Swage Fittings
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Toggle mechanical swage fitting allows a self-aligning capability for a more flexible connection such as boat lifelines. Quick Attach fittings allow very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools.
Part No: C0778-0904
|
|
|
|
Cordage -> Rigging Products->Quick Attach™ Stud & Jaw Turnbuckles
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud and Jaw Turnbuckle mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0765-1610
|
|
|
|
Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0772-2013
|
|
|
|
Cordage -> Rigging Products->Quick Attach™ Stud & Jaw Turnbuckles
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud and Jaw Turnbuckle mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0765-1307
|
|
|
|
Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0772-0704
|
|
|
|
Cordage -> Rigging Products->Quick Attach™ Stud & Jaw Turnbuckles
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud and Jaw Turnbuckle mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0765-1005
|
|
|
|
Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0771-0904
|
|
|
|
Cordage -> Rigging Products->Quick Attach™ Stud & Jaw Turnbuckles
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud and Jaw Turnbuckle mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0765-1007
|
|
|
|
Cordage -> Rigging Products->Quick Attach™ Stud & Jaw Turnbuckles
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud and Jaw Turnbuckle mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0765-0905
|
|
|
|
Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0775-1206
|
|
|
|
Cordage -> Rigging Products->Quick Attach™ Toggle Swage Fittings
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Toggle mechanical swage fitting allows a self-aligning capability for a more flexible connection such as boat lifelines. Quick Attach fittings allow very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools.
Part No: C0778-0703
|
|
|
|
Cordage -> Rigging Products->Quick Attach™ Stud & Jaw Turnbuckles
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud and Jaw Turnbuckle mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0765-0704
|
|
|
|
Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0771-0703
|
|
|
|
Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0771-1307
|
|
|
|
Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0772-1609
|
|
|
|
Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0775-1006
|
|
|
|
Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0771-1005
|
|
|
|
Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0771-1609
|
|
|
|
Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0772-0904
|
|
|
|
Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0772-1005
|
|
|
|
Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0772-1307
|
|
|
|
Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0771-0704
|
|
|
|
Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0775-0604
|
|
