Top Sellers
Series 250 Exhaust Hose, 7/8"ID, 1-3/16"OD, 565psi Burst Pressure from SHIELDS RUBBER
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
|
Series 250 Exhaust Hose, 2-3/8"ID, 2-3/4"OD, 230psi Burst Pressure from SHIELDS RUBBER
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
|
Zinc Grouper Anode from CANADA METALS
Supplements your boat's existing anodes An excellent anodic device to supplement a vessel’s existing anode system, especially to counteract stray current from defective shore power. Clip to bolt on outdrive. Clip to grounding strap if possible or wire items together with copper wire and clip to wire. Do not connect to negative battery terminals. Dimensions: 8 1/4"L x 3 1/4"W x 1 3/8"D.
|
33C Red Jacket Cable, 18' from TELEFLEX
The most widely used cable type in the world. 8" minimum bend radius. Cable adapter kits available for use with Mercury, MerCruiser, Johnson/ Evinrude, and OMC sterndrive. 3" travel.
|
Aluminum Transom Support Master Mounting Kit from TELEFLEX
Universal mount for most outboard engine steering applications. This kit includes the Teleflex Outboard Clamp Block, Support Tube, and the Clevis Kit.
|
4300BC TFX Cable - 20' from TELEFLEX
TfXtreme's unique design assures smoothness and efficiency–with hardly any lost motion–even in the longest and most complex cable routings! This means superior feel at the control, in any boat–performance that had been considered "impossible". TfXtreme achieves the "impossible". Patent-pending splined core to achieves the impossible–easy movement and minimum lost motion.
|
Big-T Rotary Helm from TELEFLEX
Die-cast gears and added shaft support help it hold up to tough use. For single or twin station powerboats up to 34'. Boat Type: Inboards and power-assisted sterndrives, up to 34' . Steering Type: Rotary . Dimensions: 6-13/16"D behind dash front x 6-3/8"W x 5-1/16"H . Steering Wheel: Up to 20". Not included . Steering Wheel Shaft: 3/4" tapered . Cable Type: QC II SSC61XX or SSC72XX . Mounting Hardware: Requires bezel kit sold separately .
|
Side-Mount with Trim & Tilt 4-Wire from TELEFLEX
SL-3 is specifically engineered for installation without control modifications. Port or starboard installation with various cable-entry angles. Adapts for push or pull mode without tools. “Easy-On” cable design means no shift or throttle adjustments. Optional trim switch in handle grip for one-hand operation. Functions: Gearshift/throttle . Levers: Dual functions—each lever controls throttle and shift . Lever Material: Metal . Features: Push button for neutral Adjustable brake .
|
Repl. Cylinder - Repl. Hynautic Model K2 from TELEFLEX
Hydraulic Cylinders -- the same quality steering components that comprise the many Hynautic systems may also be ordered independently for both new or retrofit applications.
|
|
|
Speedometer Kit 80mph, 20-80mph, Includes pitot, 20' tubing, Dia, 3.78", Mounting Hole Max/Min, 3.41"/3.44", D 2.7" from TELEFLEX
White dial, black numerals, black pointer with fire-orange tip. Scratch-resistant curved glass lenses with polished stainless steel, near flush bezels. U. S. and metric scales with ISO symbols .
|
SeaStar Helm Seal Kit from TELEFLEX
Replacement shaft seal kit HS5176 fits various post-1990 SeaStar 1. 4, 1. 7 (I), 2. 0, 2. 4 (II), SeaStar Pro and SeaStar helms.
|
BayStar Helm Seal Kits from TELEFLEX
Replacement front seal kits for both front and rear mount helms. HS5147 fits BayStar front mount and SportTilt helms . Contains 3 screws, shaft seal and o-ring seal.
|
Tach Diesel Mag. P.U. 4000 rpm from TELEFLEX
A popular choice for gas and diesel inboard engines, White Premier instruments feature white dials with modern black and blue graphics and superior light pipe illumination. When illuminated, black dial grads and pointer become red. Fog-resistant design for enhanced readability.
|
|
|
|
10' from TELEFLEX, Chrome from TELEFLEX, 16' Cable Length from TELEFLEX
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
990
1,000
1,010
1,020
1,030
1,040
1,050
1,060
1,070
1,083
1,084
1,085
1,086
1,087
1,088
1,089
1,090
1,091
1,092
1,093
1,094
1,095
1,096
1,097
1,098
1,099
1,100
1,101
1,102
1,103
1,104
1,105
1,106
1,107
1,108
1,109
1,110
1,111
1,112
1,120
1,130
1,140
1,150
1,160
1,170
1,180
1,190
1,200
1,260
|
|
|
Home -> Engine Systems -> Steering Systems -> Steering Kits->The Rack™ Stern Drive Rack and Pinion Steering System
Great for inflatables, bass boats, jet boats and small cruisers with a small space behind the dash. Uses a machine cut pinion gear, which engages a pre-assembled rack and cable with armor-stranded core. Includes rack helm, 90° bezel, bezel kit, steering cable with stainless steel output end. Steering wheel and link-arm kits sold separately. Boat Type: Virtually all power assisted stern drive boats . Turns Lock-to-Lock: Four . Dimensions: 6 1/2"D from dash front, 28 1/2"W .
Part No: SS14116
|
|
|
|
Home -> Engine Systems -> Steering Systems->SeaStar Outboard Hose Kits (two hoses per kit)
Easy installation, and made to fit most single/twin outboards A popular choice for unmatched comfort and control of your outboard, this steering system offers smooth and efficient steering for all hull types. Use with single outboards up to 300hp and dual outboards up to 600hp total. i. displacement helm pump, semi-universal front-mount cylinder, two quarts of oil, bleeder kit and installation guide. Order the popular HK6300 kit complete with set of two 22' hoses, or purchase hoses separately.
Part No: HO5114
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Cables->479 Cables
.
Part No: CC20512
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Steering Kits->No Feedback Safe-T II System
The special snap-in cable design cuts installation time dramatically, and allows you to upgrade to precision steering in practically no time at all. The compact rotary helm fits into existing Teleflex rotary steering dash cutouts. Includes the new Safe-T II helm, 90° bezel, kit and Quick Connect steering cable. Steering wheel and link-arm kits sold separately. Boat Type: Non-power assisted V-4 and smaller outboards. Up to 50 MPH . Steering Type: Rotary . Steering Wheel: Up to 16".
Part No: SS13215
|
|
|
|
Home -> Engine Systems -> Steering Systems->No Feedback Rack System
This rack and pinion system delivers precision control using patented No Feedback technology. Ideal for boats with single, nonpower-assisted outboards. Fits standard rack and pinion dash cutout. Includes NFB rack helm, 90° bezel, kit and cable. Steering wheel and link-arm kits sold separately. Boat Type: Boats with V-6 outboards and smaller. Single station only . Steering Type: Rack and Pinion . Turns Lock-to-Lock: 4 . Dimensions: 8-5/16"D from dash front x 28-1/2"W .
Part No: SS15117
|
|
|
|
Home -> Engine Systems -> Control Systems->3300 Universal Control Cables
.
Part No: CC17220
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Mechanical Steering->Ball Joint Rod Ends
For 1/2"-20 telescopics.
Part No: SA27276P
|
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Cables->33C Supreme Red-Jacket Cables
.
Part No: 301947-03-276.0
|
|
|
|
Home -> Engine Systems -> Steering Systems->SeaStar Pro Front-Mount Outboard Hydraulic Steering System
Recommended for single non-power-assisted outboards up to 300hp. The easy-to-install Sea Star PRO kit is built using the same components used in factory boatbuilding. The kit includes a 2. 0 PRO HH5770 helm, semi-universal front mount HC5345 cylinder, two quarts of oil and an installation guide. Kit can be used with jackplates (allow enough hose length for full steering motion and no interference during trim and tilt) and performance props. Match the helm with Kevlar reinforced HO57XX hoses.
Part No: HO5722
|
|
|
|
Home -> Engine Systems -> Steering Systems->Replacement Cables, Rack & Pinion
Old style rack replacement cable for the SSC124 cable only. The helm is no longer made, and we suggest a complete steering system upgrade to either the SS141XX or SS151XX kits.
Part No: SSC12418
|
|
|
|
Home -> Engine Systems -> Control Systems->3300 Cable System Parts
High-quality replacement parts and accessories for engine controls.
Part No: CA27373P
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Hydraulic Steering->SeaStar 1.7 Front-Mount Outboard Hydraulic Steering Kits
Easy installation, and made to fit most single/twin outboards A popular choice for unmatched comfort and control of your outboard, this steering system offers smooth and efficient steering for all hull types. Use with single outboards up to 300hp and dual outboards up to 600hp total. i. displacement helm pump, semi-universal front-mount cylinder, two quarts of oil, bleeder kit and installation guide. Order the popular HK6300 kit complete with set of two 22' hoses, or purchase hoses separately.
Part No: HK6322A
|
|
|
|
Home -> Engine Systems -> Steering Systems
Stylish low profile flush mount design available in several function and style options. For single or dual station applications with single or twin engines. Single function (each lever controls shift or throttle). Suits 33C type cables.
Part No: CH4451P
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Wheels And Steering Acc.->TFXtreme 4300 BC Performance Cables
TfXtreme's unique design assures smoothness and efficiency–with hardly any lost motion–even in the longest and most complex cable routings! This means superior feel at the control, in any boat–performance that had been considered "impossible". TfXtreme achieves the "impossible". Patent-pending splined core to achieves the impossible–easy movement and minimum lost motion.
Part No: CC69206
|
|
|
|
|
Home -> Engine Systems -> Steering Systems->TFXtreme 4300 BC Performance Cables
TfXtreme's unique design assures smoothness and efficiency–with hardly any lost motion–even in the longest and most complex cable routings! This means superior feel at the control, in any boat–performance that had been considered "impossible". TfXtreme achieves the "impossible". Patent-pending splined core to achieves the impossible–easy movement and minimum lost motion.
Part No: CCX43019
|
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Cables->TFXtreme 6400 BC Performance Cables
TfXtreme's unique design assures smoothness and efficiency–with hardly any lost motion–even in the longest and most complex cable routings! This means superior feel at the control, in any boat–performance that had been considered "impossible". TfXtreme achieves the "impossible". Patent-pending splined core to achieves the impossible–easy movement and minimum lost motion.
Part No: CCX64023
|
|
|
|
Home -> Engine Systems -> Engine Instruments->Premier Series Engine Instruments
.
Part No: 62720P
|
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Cables->479 Cables
.
Part No: CC20510
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Steering Kits->Safe-T® Quick Stern Drive Rotary Steering System
Rotary three-turn steering kit with a quick connect cable set up to cut down on installation time. This system works on most boats with power steering assist, inboards and small outboards under 50hp where NFB isn't required. Boat Type: Virtually all power-assisted outboard, stern drive, and inboard boats . Steering Type: Rotary . Turns Lock-to-Lock: 3 . Dimensions: 4-7/8"D behind dash front x 6-7/8"W x 5-5/16"H . Steering Wheel: Up to 16". Not included .
Part No: SS13710
|
|
|
|
Home -> Engine Systems -> Engine Instruments -> Engine Instr. Components->Teleflex Premier Series Gauges
When illuminated, light piping distributes light evenly across dial and into the staff of the pointer Excellent, "halo-less", night readability of the dial Four-gauge set includes speedometer, tachometer, fuel gauge and voltmeter Six-gauge set includes speedometer, tachometer, fuel gauge, voltmeter, and oil gauge .
Part No: 62714P
|
|
|
|
|
Home -> Engine Systems -> Control Systems->3300 Universal Control Cables
.
Part No: CC17211
|
|
|
|
|
Home -> Engine Systems -> Control Systems->3300 Universal Control Cables
.
Part No: CC17216
|
|
|
|
Home -> Engine Systems -> Control Systems->S Controls
Optional neutral safety switch to prevent starting in gear Optional detent kit (if used in dual station, use on main operating station) .
Part No: CH5200P
|
|
|
|
|
Home -> Engine Systems -> Control Systems->S Controls
Optional neutral safety switch to prevent starting in gear Optional detent kit (if used in dual station, use on main operating station) .
Part No: 061001
|
|
|
|
|
Home -> Engine Systems -> Control Systems->Morse Utility Control Cables
.
Part No: 018873-00-120.0
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Accessories->Cable Adapter Kits
Adapts 33C or 33C Supreme cables to fit directly into engine connections. Model 161424 for Evinrude/Johnson: 55-235hp, '78 to date: 20+hp, '86; 20, 25 &30hp motors may need OMC Kit 397488 if motor does not have it installed.
Part No: 300557
|
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Accessories->3300 Cable System Parts
High-quality replacement parts and accessories for engine controls.
Part No: 300646
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Accessories->Engine-Specific Connection Kits for OEM Cables
For 1973-1978 OMC original equipment style “400” type cables with bare wire ends. For use with two cables.
Part No: CA27208P
|
|
|
|
|
Home -> Engine Systems -> Steering Systems->The Rack™ Stern Drive Rack and Pinion Steering System
Great for inflatables, bass boats, jet boats and small cruisers with a small space behind the dash. Uses a machine cut pinion gear, which engages a pre-assembled rack and cable with armor-stranded core. Includes rack helm, 90° bezel, bezel kit, steering cable with stainless steel output end. Steering wheel and link-arm kits sold separately. Boat Type: Virtually all power assisted stern drive boats . Turns Lock-to-Lock: Four . Dimensions: 6 1/2"D from dash front, 28 1/2"W .
Part No: SS14120
|
|
|
|
|
Home -> Engine Systems -> Steering Systems->Safe-T® Quick Stern Drive Rotary Steering System
Rotary three-turn steering kit with a quick connect cable set up to cut down on installation time. This system works on most boats with power steering assist, inboards and small outboards under 50hp where NFB isn't required. Boat Type: Virtually all power-assisted outboard, stern drive, and inboard boats . Steering Type: Rotary . Turns Lock-to-Lock: 3 . Dimensions: 4-7/8"D behind dash front x 6-7/8"W x 5-5/16"H . Steering Wheel: Up to 16". Not included .
Part No: SS13719
|
|
|
