Top Sellers
Flush Kit For 2- & 4-Stroke Outboards from MERCURY MARINE
Fits Mercury/Mariner 4 and 5hp 2-stroke outboards and 4, 5 and 6hp 4-stroke outboards.
|
Adjustable Height Standard Friction Lock Pedestal Seat, Ribbed Series from GARELICK
Seat raises or lowers, locks at desired height . 2-7/8" (7cm) diameter stanchion tube, 9" (23cm) diameter base plate . Anodized protective finish helps prevent saltwater corrosion and weathering. . 2-7/8" (7cm) diameter ribbed stanchion tube, 9.
|
Rule-A-Matic Plus Float Switch from RULE INDUSTRIES
Is the float switch working? It's easy to check! Features a Rule-A-Matic float switch and an impact-resistant cover to protect against debris and jamming. Wiring is "blocked" by a rubber grommet to provide strain relief. Includes a convenient feature for manual tests. Activation Method: Float with mechanical contacts. Dimensions: 2-3/4"H x 2-1/2"W x 4-7/8"L. Capacity: 20A @ 12/24/32V DC.
|
Calibrated Resin Pump Set from MAS EPOXY
For use with 1 quart, 1/2 gallon, 1 gallon, 4 gallon and 5 gallon size containers.
|
Marine Silicone Sealant, Clear, 10oz. Tube from WEST MARINE
Use wherever a flexible, removable seal is required A specially-formulated marine silicone that won’t sag, shrink or turn yellow. Can be used above and below the waterline wherever a flexible, removable seal is required. Excellent for bedding deck fittings and hardware that you may want to remove at some time. Also good for insulating between dissimilar metals to prevent galvanic corrosion. Formulation: One-part silicone sealant . Bonds to non-oily woods, metal, fiberglass, glass, plastics .
|
G. O'Day 222/Santana 525,Length 47", Height at tip 2 1/4", Width at butt 1 1/2", Width at tip 2" from WEST MARINE
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Can’t find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.
|
Lube Tube Adapter for Yamaha, Nissan, Tohatsu, Honda (2-50hp) from WEST MARINE
Marine lower unit drain, flush and fill tool. Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefishier lower units. Quick, easy and clean way to change marine lower unit gear lube. For use with all 8- and 10-oz.
|
Marine Whistle from WEST MARINE
Keep this powerful, rugged and reliable whistle attached to your PFD. Made for the marine environment, from noncorroding, high-impact plastic. No metal parts.
|
Premium 4-Cycle Heavy-Duty SAE 15W40 Engine Oil, Gallon from WEST MARINE
An excellent choice for all 4-cycle inboard diesel and gasoline engines operating in all conditions. Clean-burning formula meets or exceeds both industry and factory performance specifications. Powerful additives allow for dependable engine service.
|
Life Jacket Organizer Bag from WEST MARINE
Keep extra lifejackets contained & easy to find Keep your life jackets readily accessible and protect them from damage while not in use with our bright, sturdy storage bag. We use hook-and-loop closures because zippers in a marine environment tend to freeze-up when least convenient. The fabric is heavy-duty fiber-reinforced vinyl, plainly marked for instant identification in an emergency. Accommodates 4–6 adult life jackets (depending on style).
|
Outboard Oil - SAE 10W-40 from WEST MARINE
With a higher number of performance-boosting additives than automotive oil, this synthetic blend meets and exceeds the needs of high-performance outboards. It's special formula protects outboards from friction damage and engine wear. Outstanding viscosity at low temperatures. Greater detergency. Resists engine build up. Exceeds all 4-stroke outboard requirements.
|
Premium Engine Oil - SAE 30, gallon from WEST MARINE
Exceeds OEM requirements— will not void engine warranty. Recommended for engines requiring API CF-2 level performance. Exceeds warranty requirements for all diesel and gasoline engines specifying SAE 30 or SAE 40 grade and API service classifications including Caterpillar, Cummins, Detroit Diesel, Mack, Navistar, Volvo and Mann. Heavy-duty formulation minimizes engine wear to provide long engine life. Exceeds Mack EO-K/2 and Allison C4 specifications and CID A-A-52306A requirements .
|
Spring Loaded Ring Pull, Square 2 x 2 3/8" from WEST MARINE
Spring-loaded ring immediately returns to flush when released. Type 304 stainless steel . Size: 2 x 2 3/8" .
|
Air Dryer Dehumidifier from WEST MARINE
Cast off moisture, mold and mildew A built-in fan circulates dry, warm air within your boat to prevent mold and mildew. Designed for safe, continuous dockside operation, the spark-free Turbo Dryer draws less current than a 100W light bulb so it’s inexpensive to operate all year ‘round. Housing is anodized aluminum for corrosion resistance. 10"dia. x 4 1/2"H. 110V AC.
|
Acetal Thru-Transom Scupper from WEST MARINE
One-way rubber flapper valve and thru-hull fitting. For 1-1/2"ID hose. Overall length: 6-1/4". Installation hole size: 2". Max.
|
|
2 from WEST MARINE, 4" from WEST MARINE, 9 from WEST MARINE
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
900
1,060
1,070
1,080
1,090
1,100
1,110
1,120
1,130
1,140
1,148
1,149
1,150
1,151
1,152
1,153
1,154
1,155
1,156
1,157
1,158
1,159
1,160
1,161
1,162
1,163
1,164
1,165
1,166
1,167
1,168
1,169
1,170
1,171
1,172
1,173
1,174
1,175
1,176
1,177
1,180
1,190
1,200
1,210
1,220
1,230
1,240
1,250
1,260
|
|
|
Home -> Shoes & Boots -> Leather Boat Shoes -> Men's Leather Boat Shoes->Men's Classic Comfort Mocs
Traditional mocs with engineered supportThese rugged, functional and comfortable, true-handsewn Mocs offer support and comfort with their soft padded leather tongue, full-length molded contour footbed and EVA insert. Feature nonrusting brass eyelets, extra leather reinforced toe, nonmarking outsole and rawhide lacing that won't crack. Uppers: Leather . Sole: Razor-siped, nonmarking, nonslip . Reinforcement: Extra leather reinforced toe. Stone, Honey, Dark Brown . Men’s half sizes 8–12, 13.
Part No: STONE-9 1/2
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Putties, Sealers, Misc
Permanently repairs holes, gouges, cuts and rivet leaks in aluminum boats or parts. Seals leaks in tanks, pipes, joints, drains, exhaust lines, manifolds and mufflers. Repairs cracks in outboard and I/O lower units. Cures in one hour. Can be sanded, painted, drilled and tapped.
Part No: 3761475
|
|
|
|
Home -> Engine Systems -> Engine Lubrication
14 refill for the Heavy Duty Grease Gun, model 401141 Grease gun sold separately.
Part No: 3704699
|
|
|
|
Home -> Electronics -> VHF Radios & Communications -> Hailers & Intercoms->VHS External Speakers
All-purpose utility speaker is seaworthy and loud A handy external speaker for your boat's VHF radios, hailers, public address system, foghorns and intercoms.
Part No: EXT-2
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable -> Antenna Mounts->Deck Antenna Dual-Axis Ratchet Mounts with Handle
Standardized footprint for easy replaceabilityThese popular mounts are the standard for marine antennas, but since they have traditionally been made by different companies, they end up with different hole patterns and appearances. We’ve taken the nylon version and duplicated it in Zamak for inland users, and in stainless steel for ocean users. One can easily replace another if needed. Fits all standard 1” marine antennas. Base measures 2 1/2" x 3 9/16".
Part No: 113C
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks->Trailer Hitch Balls
Chrome-plated and 304 stainless-steel solid steel hitch balls are quality constructed to ensure the strength needed for top performance.
Part No: P87122
|
|
|
|
Home -> Interior, Flags & Gifts -> Flags & Staffs -> Flag Accessories->Stainless-Steel Rail Mount with Staff
Features a beefy, polished, 314 cast stainless steel rail clamp and a staff made of 1/2" stainless-steel tube stock. Plastic insert in clamp permits mounting to 7/8" or 1" diameter rails. Quick-release flag clips included.
Part No: 82102-2
|
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks->Trailer Hitch Balls
Chrome-plated and 304 stainless-steel solid steel hitch balls are quality constructed to ensure the strength needed for top performance.
Part No: C0260-4725
|
|
|
|
Home -> Engine Systems -> Engine Lubrication -> 2 Stroke Oil->Premium 2-Cycle TC-W3 Engine Oil
Engine protection at high speeds and temperatures For use in all makes and models of outboard engines and PWCs. Meets or exceeds manufacturer’s specifications. Provides protection at high loads and maximum operating temperatures .
Part No: 2618650
|
|
|
|
Home -> Fishing -> Fishing Accessories->Angling Tools
Grab hold of one of these corrosion resistant tools and complete even the toughest job. Molded rubber handles are easy on your hands. High-quality machining provides smooth, even operation.
Part No: WFISHSRP
|
|
|
|
Home -> Shoes & Boots -> Sandals & Water Socks -> Aqua Socks->Men's Strappy Aqua Socks
Velcro power-strap for snug fit Our amphibious water shoes offer stability and protection in and around the water! Improved easy-donning slip-ons are great for nonskid protection in and around the water. Quick-drying neoprene and mesh uppers combined with molded non-marking, non-skid soles provide protection for your feet and the deck of your boat. Men’s whole sizes 5–13 (subtract two sizes for women) . Removable cushioned insoles . Unaffected by salt water . Imported . One-year warranty .
Part No: BLACK/ROYAL-9
|
|
|
|
Home -> Shoes & Boots -> Sandals & Water Socks -> Men's Sandals->Unisex Norman Island Flip-Flop Sandals
On-the-go comfort, onboard or off! Combine function and fashion for a sure grip and a classic look on deck or on the dock. Fully cushioning dual-density midsole and leather upper. Molded footbeds have water release channels keeping your feet drier. Fully lined. Non-marking, non-slip soles. Chocolate, Black, Bone. Men’s whole sizes 6-13. Imported. Leather strap is fully lined for comfort . Nonslip, nonmarking H2O rubber sole . Chocolate, Black, Bone .
Part No: BLACK-11
|
|
|
|
|
Home -> Shoes & Boots -> Sandals & Water Socks -> Men's Sandals->Unisex Norman Island Flip-Flop Sandals
On-the-go comfort, onboard or off! Combine function and fashion for a sure grip and a classic look on deck or on the dock. Fully cushioning dual-density midsole and leather upper. Molded footbeds have water release channels keeping your feet drier. Fully lined. Non-marking, non-slip soles. Chocolate, Black, Bone. Men’s whole sizes 6-13. Imported. Leather strap is fully lined for comfort . Nonslip, nonmarking H2O rubber sole . Chocolate, Black, Bone .
Part No: CHOCOLATE-12
|
|
|
|
Home -> Anchor & Docking -> Anchor Line & Dock Line->Prespliced Double Braid Nylon Dock Line
Give your boat a sharp, well-kept look! This is the strongest and easiest-to-handle line you can buy that stays flexible throughout its service life. The core and cover is constructed from the highest quality treated nylon. Our Double Braid line offers controlled elongation and excellent abrasion resistance. Double braid lines stretch slightly less but are stronger than three-strand lines. Each line has a professionally spliced 12" eye with a heat-sealed bitter end. High elongation.
Part No: 4061-16-00015
|
|
|
|
Home -> Watersports -> Tow Ropes & Accessories -> Watersport Accessories
12V mini inflator plugs into a cigarette lighter socket Universal valve fitting that's great for most smaller inflation chores 3" x 4".
Part No: U164BLU-00-WMP
|
|
|
|
Home -> Books & Videos -> Books
Handy reference for rope selection and line handling Handy reference shows step by step illustrations on tying the basic knots plus splicing instructions, rope selection and line handling. You'll be glad to have this QuickGuide onboard to refer to for tricky docking situations, towing operations, and even cleating and coiling techniques. Drawn from the worlds largest boating library, includes 14 color panels of authoritative, concise information. Folds to just 4" x 9".
Part No: 007143769X
|
|
|
|
Home -> Safety -> Flares & Signaling Devices -> Horns & Whistles
Award-winning horn is great for emergency signaling or sending a message Winner of the 2003 Innovation Award presented by the National Marine Manufacturers Association. Our exclusive handheld horn is great onboard for emergency signaling or boat-to-boat hailing—and for camping, hunting, hiking or sporting events. This 9V horn uses Piezo-Electric technology and has no limited shelf-life so you don’t have the cost of replacement cans for your old airhorn. USCG approved. Maximum decibels: 112dB.
Part No: 545-5010-7
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->CPP Plus Antifouling Paint
Growth-free protection with minimal paint build-up! CPP Plus is an affordable self-polishing ablative paint. This “self-polishing” paint releases new biocide as the boat moves through the water and combines excellent protection with minimal paint build-up. Can be used in fresh or salt water. Not available in Canada or California .
Part No: 411128006
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Fenders->Modular Flat Fenders
Constructed of closed-cell EVA, these long-lasting fenders won't puncture or waterlog, saving you money in the long run. They are rectangular and flat so they won't roll or ride up. Easy to fasten together to create a modular system that fits your fender needs exclusively. Flat shape makes them compact and easy to store, and they can also double as knee pads or seat cushions. Tie up lines included. .
Part No: 311WM
|
|
|
|
Home -> Safety -> Life Jackets->Competitor Series™ Vest
COMPETITOR FISHING VEST.
Part No: 4180NAV-03-WMP
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Sea Gloss Pro Nonskid Paint
NONSKID PAINT OFF WH QT.
Part No: 1410808
|
|
|
|
Home -> Sailboat -> Tiller & Rudder->Laminated Replacement Tillers
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Can’t find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.
Part No: 2300
|
|
|
|
Home -> Books & Videos -> Books
On the water, when questions arise, there's no time to search through exhaustive manual. The Captain's Quick Guides provide all the answers--fast. Based on the world's largest boating library, this laminated Quick Guide presents 14 color panels of authoritative, concise information on on-board weather forecasting, designed for quick reference. The essential information you need--onboard and at your fingertips Author: Robert J.
Part No: 0071445501
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting->Economy Trailer Lights
Affordable and durable lights re designed for trailers under 80" wide. Kits include two tail lights, trailer harness, license bracket, installation kit and are available with or without marker lamps. Left handtail lamp includes license plate illuminator. High-impact acrylic lens and rugged duramold housing. Not recommended for submersible applications.
Part No: 01-6538-71
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting->Economy Surface Mount Sidemarker/Clearance Lights
Self-grounding flange mounted lights feature a corrosion-resistant duramold base. Combination marker light with integrated reflector. Not recommended for submersible applications. .
Part No: 01-4639-75
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lighting->Submersible Under 80"W Trailer Lights
Gasketed lenses help keep water away from the bulbs and contacts of these lights, which are designed for under 80" wide trailers. The left light includes a license plate illuminator. Kits are available with and without sidemarker lamps. High-impact acrylic lens and rugged duramold housing. Lighting kits include two tail lights, trailer harness, license bracket, installation kit and instructions.
Part No: 01-6523-71
|
|
|
|
Home -> Shoes & Boots -> Waterproof Boots->Tall Cruising Boots
The solution, we’d like to suggest, is to buy a pair of our Tall Cruising Boots, so that you have plenty of overlap with your foul weather gear pants. The inner sole can be removed to speed up drying should water find its way inside. These boots are also available in a shorter height if you prefer. " Rely on these tall boots when you want to stay dry and steady on your feet. Rugged reinforced heels and toes and nonslip, razor cut soles with multi-directional wave cut grip. Imported.
Part No: NAVY-7
|
|
|
|
Home -> Sailboat -> Rigging Products->Spreader Boots
Protect your sails from ripping or tearing on your boat’s spreaders with these soft injection-molded UV-resistant synthetic rubber spreader boots. They fit wing and round spreaders, feature a smaller frontal area for less wind resistance and have greater surface area on the end to reduce sail chafing. They install quickly and easily over spreader ends and shrouds, and secure with self bonding rigging tape, Model 318600 (sold separately).
Part No: SPRBOOTSL
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis
Contains 40 sets of Button Sockets with 1/4" Barrel, 22 sets of Button Studs for 1/4" Barrel and Eyelet, eight Button Studs with #8 x 3/8" Tapping Screw, 10 Button Studs with #8 x 5/8" Tapping Screw, Punch Tool and Base.
Part No: KP7262W
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats->Inflatable Boat Top Coating
Restore Hypalon or PVC. Remains flexible. Inflatables can be deflated and rolled without cracking the coating. Quart covers 10’ boat.
Part No: TPB-1
|
|
|
