Top Sellers
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
Noise Reduction Seam Tape from WEST MARINE
The 3/32" flexible vinyl sheet is fused between two layers of foam—an exterior (“decoupler”) layer and an interior (“absorber”) layer. The exterior layer is then covered with a thin film (2. 5 mil) of mylar, reinforced with elastomer-coated fiberglass, for surface heat protection and enhanced sound absorption. The overall effect is a dramatic noise reduction when compared with single-layer foam barriers. Available in two overall thicknesses. Peel and stick backing for easy installation.
|
Marine Silicone Sealant, Clear, 10oz. Tube from WEST MARINE
Use wherever a flexible, removable seal is required A specially-formulated marine silicone that won’t sag, shrink or turn yellow. Can be used above and below the waterline wherever a flexible, removable seal is required. Excellent for bedding deck fittings and hardware that you may want to remove at some time. Also good for insulating between dissimilar metals to prevent galvanic corrosion. Formulation: One-part silicone sealant . Bonds to non-oily woods, metal, fiberglass, glass, plastics .
|
G. O'Day 222/Santana 525,Length 47", Height at tip 2 1/4", Width at butt 1 1/2", Width at tip 2" from WEST MARINE
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Can’t find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.
|
1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.
|
|
|
Marine Whistle from WEST MARINE
Keep this powerful, rugged and reliable whistle attached to your PFD. Made for the marine environment, from noncorroding, high-impact plastic. No metal parts.
|
Premium 4-Cycle Heavy-Duty SAE 15W40 Engine Oil, Gallon from WEST MARINE
An excellent choice for all 4-cycle inboard diesel and gasoline engines operating in all conditions. Clean-burning formula meets or exceeds both industry and factory performance specifications. Powerful additives allow for dependable engine service.
|
Life Jacket Organizer Bag from WEST MARINE
Keep extra lifejackets contained & easy to find Keep your life jackets readily accessible and protect them from damage while not in use with our bright, sturdy storage bag. We use hook-and-loop closures because zippers in a marine environment tend to freeze-up when least convenient. The fabric is heavy-duty fiber-reinforced vinyl, plainly marked for instant identification in an emergency. Accommodates 4–6 adult life jackets (depending on style).
|
Lube Tube Adapter for Yamaha, Nissan, Tohatsu, Honda (2-50hp) from WEST MARINE
Marine lower unit drain, flush and fill tool. Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefishier lower units. Quick, easy and clean way to change marine lower unit gear lube. For use with all 8- and 10-oz.
|
Acetal Thru-Transom Scupper from WEST MARINE
One-way rubber flapper valve and thru-hull fitting. For 1-1/2"ID hose. Overall length: 6-1/4". Installation hole size: 2". Max.
|
Outboard Oil - SAE 10W-40 from WEST MARINE
With a higher number of performance-boosting additives than automotive oil, this synthetic blend meets and exceeds the needs of high-performance outboards. It's special formula protects outboards from friction damage and engine wear. Outstanding viscosity at low temperatures. Greater detergency. Resists engine build up. Exceeds all 4-stroke outboard requirements.
|
Cabinet Handle, Stainless Steel Bar 7" from WEST MARINE
Brushed, 304 grade stainless steel pull handles feature smooth rounded ends, hidden fasteners and a stylish contemporary Euro design. Wide range of sizes available from 6 1/4" to 25" for cabinets and drawers of all sizes.
|
Portable Gunwale-Mount Boarding Ladder, 3 Steps, 11" Gunwale Width from WEST MARINE
These portable ladders hook right over your boat’s gunwale with a hull hugging design and ladder standoffs for added safety. Thick non-skid steps feature an Ultra Traction tread that’s kind to your feet. Keep one accessible on board your boat for swimming, skiing and emergencies. 225lb. Mounting Style: Hook over gunwale . Material: Heavy-duty 1" aluminum tubing, vinyl hooks and step treads . Dimensions: 3-step: 36"L x 15"W; 4-step: 48"L x 15"W .
|
Air Dryer Dehumidifier from WEST MARINE
Cast off moisture, mold and mildew A built-in fan circulates dry, warm air within your boat to prevent mold and mildew. Designed for safe, continuous dockside operation, the spark-free Turbo Dryer draws less current than a 100W light bulb so it’s inexpensive to operate all year ‘round. Housing is anodized aluminum for corrosion resistance. 10"dia. x 4 1/2"H. 110V AC.
|
|
1" from WEST MARINE, 4" from WEST MARINE, White from WEST MARINE
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
900
1,060
1,070
1,080
1,090
1,100
1,110
1,120
1,130
1,140
1,152
1,153
1,154
1,155
1,156
1,157
1,158
1,159
1,160
1,161
1,162
1,163
1,164
1,165
1,166
1,167
1,168
1,169
1,170
1,171
1,172
1,173
1,174
1,175
1,176
1,177
1,178
1,179
1,180
1,181
1,190
1,200
1,210
1,220
1,230
1,240
1,250
1,260
|
|
|
Home -> Interior, Flags & Gifts -> Flags & Staffs->Individual Code Flags
Top quality all-nylon flags. Size is 12" x 18". Use for communication. Heavy-duty sewn construction. Nylon.
Part No: MT2716-X
|
|
|
|
Home -> Electronics -> Video, Stereos, Weather Radios -> Speakers->Two-Way Flush-Mount Speakers
Superior quality waterproof marine speakers at a great price! We’ve worked with a manufacturer who can meet all of our tough specifications for marine stereo speakers to design superior quality, long-lasting waterproof marine speakers at an attractive price! Waterproof, round two-way speakers feature corrosion-proof high-impact plastic grilles and all stainless and brass hardware. Watts: 120/pair . Impedance: 4 ohms . Waterproof: Exterior waterproof . Material: Aluminum grille, plastic case .
Part No: WM-6500W
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Polymer Lumber->Marine Lumber Plastic Building Material
An ideal material for building projects to replace worn-out teak or plastic laminates. Marine Lumber is high-density polyethylene which is stabilized to resist saltwater, chemicals, and sunlight. It will not rot or delaminate, and is easily cut, routed, shaped and drilled, using standard woodworking tools. It retains its original color indefinitely, and doesn’t require refinishing. The scuff-resistant surface cleans easily and quickly with a scrub brush and light abrasive cleaner.
Part No: P10-7524SFM271W
|
|
|
|
Home -> Safety -> Life Jackets -> Life Jacket Accessories->Rearming Kits and CO2
West Marine SOS Kid’s Hybrid Rearming Kit Style: Automatic. Cylinder Weight: 12g. Cylinder Neck Diameter: 3/8" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: SOS Kid’s Hybrid. Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
Part No: V85000-81123Z
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware -> Drinkware
Stainless mug holds 16 ounces12-ounce capacity, all stainless steel mug has a nonslip base and double wall construction for superior heat and cold retention.
Part No: SLD-SDC430
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware -> Drinkware->Travel and Driver's Mugs
Wide-bottom stainless-steel vacuum travel mug is safe to take anywhere. It has a non-skid bottom which makes it almost spill-proof. This mug has a sip-through top and can be used for hot and cold beverages. Stainless-steel, vacuum driver’s mug is designed specifically to fit securely in most cup holders. This mug holds your favorite hot or cold beverage, has a secure sip-through top and stays cool to the touch. Travel style wide base Drivers style cup-holder size base.
Part No: SLD-SDC400B
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats
Our sealant finds leaks too small to find! Positively seals pinhole leaks that are too small to identify and patch. Inject into valve and then tumble boat to distribute inside the tube.
Part No: WMINF
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Carabiners & Snaphooks->Genius Carabiners
An ingenious innovation—the gate opens at an angle to accommodate ''fatter'' rings and large mooring lines.
Part No: 590.10
|
|
|
|
Home -> Sailboat -> Rigging Products -> Rigging Tape->Self-Bonding Rigging Tape
Conforms to irregular shapes and holds fast without sticky adhesives Protects sails and sheets from chafe damage. Self-bonding tape conforms to irregular shapes and holds fast without sticky adhesives. Durable and waterproof, with UV inhibitors. 1"W x 10'L per roll. Stretches to two times its original length.
Part No: 318600
|
|
![5/16'' X 11/16'' Clevis Pin [2 Qty] from WEST MARINE](http://images.westmarine.com/thumb/445553.jpg "5/16'' X 11/16'' Clevis Pin [2 Qty] from WEST MARINE")
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Clevis Pins
Stainless Steel Clevis Pins.
Part No: 5556MP
|
|
|
|
Home -> Watersports -> Tow Ropes & Accessories -> Tow Ropes
"West Marine tube rope – if you have any tubes on your boat, this is the rope for you. Pulls just about anything. " Tow line for a great day in the tube This is a rope you know will hold you for the entire day without ever showing signs of fatigue or let down. Woggle ensures a secure, easy connect and disconnect for any type of towable device. 60 foot line . 3/8", 16-strand polypropylene line .
Part No: 6301.5.00.1
|
|
|
|
Home -> Paint & Maintenance -> Scrub Brushes & Hoses -> Scrubbers,Sponges,Buckets->Scrub Pads w/ Gripper
Soft, medium, and course—a job for every pad and a pad for every job!For gentle scouring, general cleaning or tough scrubbing tasks. Fused, full length handles give a sure grip and put pressure directly on top of pad. Soft, meduim and course—for all types of scrubbing jobs .
Part No: 419500
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Striping Tape->Premium Striping Tape
.
Part No: 3250078
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Clevis Pins
Stainless Steel Clevis Pins.
Part No: 5247MP
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Clevis Pins
Stainless Steel Clevis Pins.
Part No: 5559MP
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Cotter Pins
Assorted packs of stainless-steel cotter pins.
Part No: 1185MP
|
|
|
|
Home -> Sailboat -> Rigging Products->Leather Turnbuckle Covers
Add a distinctive look and chafe protection, too. Natural gray leather attaches and removes easily with hook-and-loop strips.
Part No: 1405-14
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Winch Wheel & Acc. Cove->Adjustable Winch Covers
Adjustable winch covers can be cinched, cuffed, rolled or extended to customize fit for any winch, including those installed on pads cut at unusual angles. Made of UV and mildew-resistant Sunbrella® fabric. Wide band at base lets you adjust the length to cover an awkwardly angled winch pad as well as the winch and is reinforced with webbing for durability. Split sides let you leave sheets and halyards on the winch while covered, and also helps ventilate. Pacific Blue.
Part No: 54418
|
|
|
|
Home -> Fishing -> Fishing Accessories -> Rod Holders->WM Striker Grip Adjustable Rod Holders
Premium components and a versatile design make this tilting, rotating, lockable 10" rod holder hard to beat. Convertible for use with a wide range of mounts. The 2"ID Striker Grip accommodates all types of rods and reels. Provides rugged support when trolling, drifting or bottom fishing. Tilts fully upright for rod storage while underway.
Part No: 230WEST-WH
|
|
|
|
Home -> Fishing -> Fishing Accessories -> Rod Holders->Rod Holder Mounting Brackets
Adapt the Striker Grip and Baitcaster Holders to your boat. Surface Deck Mount allows flat or vertical mount. Rail Mount Adapter fits 7/8”–1” round & 1” square rails. Flush Deck Mount includes rain cover. Adapt the Striker Grip and Caster Grip to your boat. Surface Deck Mount allows flat or vertical mount. Rail Mount Adapter fits 7/8”–1” round and 1” square rails.
Part No: 242WEST-WH
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->Galvanized Steel Screw Pin Anchor Shackles
Roughly the same strength as proof coil chain of the same size. To prevent accidental opening, always seize the shackle pin with safety wire. For increased strength, use one size larger than the chain, especially with High-Test chain (the pins will still fit). Meet Fed. Spec. RR-C-271b Type IV Class 1.
Part No: 6591S
|
|
|
|
Home -> Interior, Flags & Gifts -> Gifts -> Keychains, Plaques->West Marine Keyfloat
Get inexpensive insurance against this foreseeable disaster! Choose blue or white float.
Part No: WKF
|
|
|
|
Home -> Cordage -> Rigging Products->Fiberglass Tapered Battens
Made for West Marine, tapered battens for every sail These battens are used by many well-known sail lofts. They are tapered for better sail shape and have protective vinyl tips. Label indicates which end to insert first.
Part No: TAP18X75
|
|
|
|
|
Home -> Cordage -> Rigging Products->Fiberglass Tapered Battens
Made for West Marine, tapered battens for every sail These battens are used by many well-known sail lofts. They are tapered for better sail shape and have protective vinyl tips. Label indicates which end to insert first.
Part No: TAP36X15
|
|
|
|
Home -> Cabin & Galley -> Containers & Storage
Stainless steel hammock hooks, for use with the Gear Hammock (model 104364). 1 1/4" sq.
Part No: 671460-1
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Swivel-Eye Boat Snaps
*Model 116103 has a unique opening method (see photo).
Part No: M1174-0002
|
|
|
|
Home -> Safety -> Man Overboard Gear->Lifeline Netting
Rugged nylon netting keeps kids, headsails, foredeck crew and pets aboard. Each net is 2'H .
Part No: 128
|
|
|
|
Home -> Cordage -> Anchor Line & Dock Line -> Dock Line->Prespliced Double Braid Nylon Dock Line
Give your boat a sharp, well-kept look! This is the strongest and easiest-to-handle line you can buy that stays flexible throughout its service life. The core and cover is constructed from the highest quality treated nylon. Our Double Braid line offers controlled elongation and excellent abrasion resistance. Double braid lines stretch slightly less but are stronger than three-strand lines. Each line has a professionally spliced 12" eye with a heat-sealed bitter end. High elongation.
Part No: 4069-12-00015
|
|
|
|
|
Home -> Anchor & Docking -> Anchor Line & Dock Line->Prespliced Double Braid Nylon Dock Line
Give your boat a sharp, well-kept look! This is the strongest and easiest-to-handle line you can buy that stays flexible throughout its service life. The core and cover is constructed from the highest quality treated nylon. Our Double Braid line offers controlled elongation and excellent abrasion resistance. Double braid lines stretch slightly less but are stronger than three-strand lines. Each line has a professionally spliced 12" eye with a heat-sealed bitter end. High elongation.
Part No: 4060-20-00015
|
|
|
|
Home -> Cordage -> Anchor Line & Dock Line -> Dock Line->Premium White Prespliced Three-Strand Nylon Dock Lines
Boxed, premium nylon lines with state-of-the-art marine coating provide superior wet abrasion resistance to counteract chafe, the number one enemy of lines that stay cleated for long periods of time. Professionally hand-spliced with five tucks and whipped bitter end. 12" eye. 3/8"–3/4"dia. . 10'–35' lengths . Breaking strengths from 4,400lb. –16,700lb.
Part No: 8550-20-00050
|
|
|
