Top Sellers
|
|
Marine Silicone Sealant, Clear, 10oz. Tube from WEST MARINE
Use wherever a flexible, removable seal is required A specially-formulated marine silicone that won’t sag, shrink or turn yellow. Can be used above and below the waterline wherever a flexible, removable seal is required. Excellent for bedding deck fittings and hardware that you may want to remove at some time. Also good for insulating between dissimilar metals to prevent galvanic corrosion. Formulation: One-part silicone sealant . Bonds to non-oily woods, metal, fiberglass, glass, plastics .
|
G. O'Day 222/Santana 525,Length 47", Height at tip 2 1/4", Width at butt 1 1/2", Width at tip 2" from WEST MARINE
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Can’t find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.
|
Marine Whistle from WEST MARINE
Keep this powerful, rugged and reliable whistle attached to your PFD. Made for the marine environment, from noncorroding, high-impact plastic. No metal parts.
|
Life Jacket Organizer Bag from WEST MARINE
Keep extra lifejackets contained & easy to find Keep your life jackets readily accessible and protect them from damage while not in use with our bright, sturdy storage bag. We use hook-and-loop closures because zippers in a marine environment tend to freeze-up when least convenient. The fabric is heavy-duty fiber-reinforced vinyl, plainly marked for instant identification in an emergency. Accommodates 4–6 adult life jackets (depending on style).
|
Lube Tube Adapter for Yamaha, Nissan, Tohatsu, Honda (2-50hp) from WEST MARINE
Marine lower unit drain, flush and fill tool. Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefishier lower units. Quick, easy and clean way to change marine lower unit gear lube. For use with all 8- and 10-oz.
|
|
|
Rail Mount Outboard Bracket, 10 1/2" from WEST MARINE
Keep your small outboard safe and upright on the stern rail, rather than stowed in a locker where gasoline from the tank could cause hazardous fumes to collect, or spill and ruin stored goods. Two-piece mounting blocks clamp around a 1'' O. D. rail ''T''. Holds outboards up to 8 hp. Each comes complete with stainless mounting bolts. UV-stabilized polypropylene.
|
1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.
|
Tubing-Alu 7/8X20' from WEST MARINE
Bright 304 polished stainless steel or bright anodized aluminum. Used for a multitude of applications including grab rails, bow rails, and canvas top frames. Match materials between components to minimize corrosion. Stainless has . 049" wall thickness . Aluminum has . 058" wall thickness . Use 7/8" tubing for smaller powerboats . Use 1" tubing for sailboats and larger powerboats . Available in 6', 12' and 20' lengths .
|
Acetal Thru-Transom Scupper from WEST MARINE
One-way rubber flapper valve and thru-hull fitting. For 1-1/2"ID hose. Overall length: 6-1/4". Installation hole size: 2". Max.
|
Cabinet Handle, Stainless Steel Bar 7" from WEST MARINE
Brushed, 304 grade stainless steel pull handles feature smooth rounded ends, hidden fasteners and a stylish contemporary Euro design. Wide range of sizes available from 6 1/4" to 25" for cabinets and drawers of all sizes.
|
Portable Gunwale-Mount Boarding Ladder, 3 Steps, 11" Gunwale Width from WEST MARINE
These portable ladders hook right over your boat’s gunwale with a hull hugging design and ladder standoffs for added safety. Thick non-skid steps feature an Ultra Traction tread that’s kind to your feet. Keep one accessible on board your boat for swimming, skiing and emergencies. 225lb. Mounting Style: Hook over gunwale . Material: Heavy-duty 1" aluminum tubing, vinyl hooks and step treads . Dimensions: 3-step: 36"L x 15"W; 4-step: 48"L x 15"W .
|
Boat Hook Tip from WEST MARINE
Highly polished bronze with a 1" tapered hole.
|
Air Dryer Dehumidifier from WEST MARINE
Cast off moisture, mold and mildew A built-in fan circulates dry, warm air within your boat to prevent mold and mildew. Designed for safe, continuous dockside operation, the spark-free Turbo Dryer draws less current than a 100W light bulb so it’s inexpensive to operate all year ‘round. Housing is anodized aluminum for corrosion resistance. 10"dia. x 4 1/2"H. 110V AC.
|
|
1 from WEST MARINE, West Marine logo from WEST MARINE
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
900
1,070
1,080
1,090
1,100
1,110
1,120
1,130
1,140
1,150
1,154
1,155
1,156
1,157
1,158
1,159
1,160
1,161
1,162
1,163
1,164
1,165
1,166
1,167
1,168
1,169
1,170
1,171
1,172
1,173
1,174
1,175
1,176
1,177
1,178
1,179
1,180
1,181
1,182
1,183
1,190
1,200
1,210
1,220
1,230
1,240
1,250
1,260
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks->Flat Hinges
Open width: 2". Overall width: 2 3/4". Uses #5 fasteners (sold separately).
Part No: H62-2753CH-1W
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Hinges->Stainless Door Hinges
Stainless Butt Hinge,3x 1 1/2|HINGE-DOOR 1-1/2X3.
Part No: H30-1060-1W
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware -> Drink Holders->Suction Mount Drink Holder
Secure suction mounting drink holders safely cup your drink containers in the pilot room or galley. Holds large coffee mugs and insulated drinks. High-density polypropylene construction.
Part No: 67723W
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->12V Flush Mount Receptacles & Plugs
Add up to three 12V receptacles all at once. Each receptacle has a weatherproof cap to protect the contacts from corrosion.
Part No: SC-107LED
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lighting->Sealed Sidemarker/Clearance Lights
Polycarbonate lens and housing are sonically welded for stability. This light is often used in the fender marker light location. Fully submersible. Models 6861488 and 6861371 include a self grounding chrome bracket. 2-1/2"W x 1-1/4"H x 7/8"D.
Part No: 01-4787-72
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories
Five crimping tools in one! This crimper comes with five interchangeable dies for crimping all kinds of electrical connectors—coaxial, non-insulated, insulated, open-barrel and insulated cord end terminals. Crimps in one motion, relieving hand strain and fatigue. Includes release lever. Housed in a rugged case. Functions: Crimps most electrical connectors with five dies . Wire Gauges Handled: 24-10AWG . Length: 8-5/8" . Tool Materials: Coated steel, PVC handle .
Part No: J6B-ABCDE
|
|
|
|
Home -> Shoes & Boots -> Waterproof Boots->Tall Cruising Boots
The solution, we’d like to suggest, is to buy a pair of our Tall Cruising Boots, so that you have plenty of overlap with your foul weather gear pants. The inner sole can be removed to speed up drying should water find its way inside. These boots are also available in a shorter height if you prefer. " Rely on these tall boots when you want to stay dry and steady on your feet. Rugged reinforced heels and toes and nonslip, razor cut soles with multi-directional wave cut grip. Imported.
Part No: NAVY-12
|
|
|
|
Home -> Electronics -> VHF Radios & Communications -> Fixed Mount VHF Radios->VHF650 Class D DSC VHF Radio
"When we received the pre-production samples of the VHF650 at West Marine, I “borrowed” one and installed it on my Zodiac RIB. The first thing I noticed was that its short chassis fits the console perfectly and doesn’t protrude like the old radio. It’s also a cinch to use, since the dot-matrix LCD display has a scrolling menu function that makes it easy to set up DSC functions and to change display settings. It doubles as a weather monitor that can alert you to a killer storm on the way.
Part No: VHF650
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Fender Accessories->Premium Nylon Fender Covers
Protect your fenders so they last! Protect your fenders from UV degradation with these seamless, circular-knit nylon fender covers. Improved with new long-lasting, 400-denier nylon fabric that will not fade or bleed, is tear and abrasion-resistant and machine washable. Adjustable rope sewn into the hem provides a custom fit. .
Part No: 9057WM
|
|
|
|
Home -> Shoes & Boots -> Sandals & Water Socks -> Childrens Sandals->Kids' Aqua Socks
Our amphibious water shoes offer stability and protection in and around the water!Our improved easy-donning slip-ons are great for nonskid protection in and around the water. Quick-drying neoprene and mesh uppers combined with molded non-marking, non-skid soles provide protection for your feet and the deck of your boat. Kids sizes 4/5, 6/7, 8/9, 10/11, 12/13, 1.
Part No: BLUEGREEN-1
|
|
|
|
Home -> Engine Systems -> Engine Lubrication -> 2 Stroke Oil->Premium 2-Cycle TC-W3 Engine Oil
Engine protection at high speeds and temperatures For use in all makes and models of outboard engines and PWCs. Meets or exceeds manufacturer’s specifications. Provides protection at high loads and maximum operating temperatures .
Part No: 2618718
|
|
|
|
Home -> Plumbing -> Fittings & Valves
Provides lubrication to help easily put hose on fitting.
Part No: 6285
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers->Nylon Cleats
Open base, glass-filled nylon cleats with two mounting holes. 3" cleat: 5/16 max line dia. , 9/16" Height, #8 FSTN. 4" cleat: 3/8 max line dia. , 3/4" Height, #8 FSTN. 5" cleat: 3/8 max line dia. , 1" Height, #10 FSTN. 6" cleat: 1/2 max line dia. , 1 1/4" Height, 1/4" FSTN. 8" cleat: 5/8 max line dia.
Part No: 81023
|
|
|
|
Home -> Fishing -> Fishing Accessories->Angling Tools
Grab hold of one of these corrosion resistant tools and complete even the toughest job. Molded rubber handles are easy on your hands. High-quality machining provides smooth, even operation.
Part No: WFISH8SLP
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Starboard Poly-Sheets Building Material
.
Part No: P10-7512BLK271W
|
|
|
|
Home -> Paint & Maintenance -> Scrub Brushes & Hoses
Keep onboard for spills, cleaning or bige pumping3 1/2 gal. bucket with comfort-grip handle. Use for cleaning/washdowns, bait, supplies, etc. Holds plenty of cleaning solution for big jobs. Sturdy, lightweight plastic. Comfort-grip handle.
Part No: 1260124
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks->Trailer Hitch Balls
Chrome-plated and 304 stainless-steel solid steel hitch balls are quality constructed to ensure the strength needed for top performance.
Part No: P87712
|
|
|
|
Home -> Cordage -> Rigging Products -> Rigging Wire->Premium Lifeline Cushions
These comfortable cushions have an integral PVC tube that keeps them from being cut by the lifelines. Solution-dyed acrylic cover provides UV protection and prevents rapid deterioration. These good-looking cushions will keep your crew cozy on the rail!. 1 1/2"OD, 1/2"ID, 57"L.
Part No: 9061
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless Steel “D” Rings
Polished, heliarc-welded, stainless-steel rings.
Part No: C0139-X640-W
|
|
|
|
Home -> Fishing -> Fishing Accessories -> Rod Holders->Plastic Flush-Mount Rod Holders
These light- to medium-duty rod holders are made of high-impact ABS plastic so you‘ll never have to worry about rust Flange size is 3 1/2" x 4 1/4". Flange has a slightly textured top surface.
Part No: 340220032
|
|
|
|
Home -> Seating & Covers -> Seating
Comfortable, durable, easy to maintain, and value priced—what more can you ask of a seat and pedestal package? An ideal way to upgrade or replace existing seats/pedestals and save! Sold as a complete package only. 15" high, 2-7/8" dia. anodized pedestal . Removable marine-grade vinyl covered foam cushions . UV-resistant roto-molded polyethylene shell . Anodized aluminum and stainless hardware .
Part No: 740002SK
|
|
![SeaGel Battery Group 31, 97 Ah, 12V, 550 CCA, 780 MCA from WEST MARINE]( "SeaGel Battery Group 31, 97 Ah, 12V, 550 CCA, 780 MCA from WEST MARINE")
|
|
Home -> Electrical -> Batteries & Accessories->SeaGel Deep Cycle Batteries
Versatile and maintenance-free for increased installation options We recommend these batteries without hesitation. They’re remarkably resistant to damage from deep discharges and extended storage. They can even be immersed without leaks, spills or other damage. Once charged, their low self-discharge rate allows the batteries to sit unattended an entire winter without significant power loss. Gel batteries charge at lower voltages than deep cycle or AGM, so smart regulation is advised.
Part No: 8G31DTM
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Teak Cleaners->Teak Trim Kit
Convenient kit to clean, brighten and protect your teakA convenient and economical way to buy just what your stained or weathered teak requires. Each kit contains our premium Gold Teak Oil and One-Step Teak Cleaner & Brightener. One-step cleaner saves time.
Part No: 2304-QT KT
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Basic Pivoting Fluke Anchors->Traditional Anchors
Strong, reliable, high-quality, affordable anchors with precise dimensions and hot dip galvanizing for corrosion protection. Patterned after the original lightweight Danforth anchors, including precision die-cut components for accurate assembly and symmetry, a tapered shank with chamfered edges for deeper seabed penetration and increased stock length and fluke angle for roll stability and dependability. Material: Galvanized steel . Application: Sand and mud . Great in sand and good in mud. .
Part No: 94040
|
|
![1/4'' X 3/4'' Clevis Pins [2 Qty] from WEST MARINE](http://images.westmarine.com/thumb/445553.jpg "1/4'' X 3/4'' Clevis Pins [2 Qty] from WEST MARINE")
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Clevis Pins
Stainless Steel Clevis Pins.
Part No: 5246MP
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Clevis Pins
Stainless Steel Clevis Pins.
Part No: 5250MP
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Fixed-Eye Boat Snaps
Polished naval bronze or nickel-plated brass.
Part No: 363-03-N
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Cotter Pins
Assorted packs of stainless-steel cotter pins.
Part No: 1193MP
|
|
|
|
Home -> Cordage -> Rigging Products->Fiberglass Tapered Battens
Made for West Marine, tapered battens for every sail These battens are used by many well-known sail lofts. They are tapered for better sail shape and have protective vinyl tips. Label indicates which end to insert first.
Part No: TAP36X.75 inch
|
|
|
|
Home -> Cabinet & Deck Hardware -> Rail Fittings & Rub Rail->Rail Tubing
Bright 304 polished stainless steel or bright anodized aluminum. Used for a multitude of applications including grab rails, bow rails, and canvas top frames. Match materials between components to minimize corrosion. Stainless has . 049" wall thickness . Aluminum has . 058" wall thickness . Use 7/8" tubing for smaller powerboats . Use 1" tubing for sailboats and larger powerboats . Available in 6', 12' and 20' lengths .
Part No: S14-7849P6-1
|
|
|
