Top Sellers
Fiberglass Boat Repair and Maintenance - Book from WEST SYSTEM
WEST SYSTEM® Technical Books—Guide you through a wide range of projects and repairs These books are chock-full of important of information on recommended product usage, applications, and step-by-step instructions for a wide variety of projects, including blister repair, deck reinforcement, lamination repair, closing of punctures and holes, dry rot repairs and more. Specific step-by-step instructions. Helpful illustrations.
|
G/Flex 655 Resin 4.75 Gal. from WEST SYSTEM
G/flex 655 Thickened Epoxy Adhesive comes with a thickening agent already added. G/flex offers important features: Toughness and Flexibility G/flex has been toughened. With a modulus of elasticity of 150,000 psi (WEST SYSTEM 105 Resin/205 Hardener has a modulus of elasticity of 450,000 psi), G/flex is more flexible and can deflect further than WEST SYSTEM 105/205, while being much stiffer than typical adhesive sealants. Bonds to wet and damp surfaces G/flex has the ability to glue damp woods.
|
G/Flex 650 Hardener 4.75 Gal. from WEST SYSTEM
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. G/flex offers these important features: Toughness and Flexibility G/flex has been toughened. With a modulus of elasticity of 150,000 psi (WEST SYSTEM 105 Resin/205 Hardener has a modulus of elasticity of 450,000 psi), G/flex is more flexible and can deflect further than WEST SYSTEM 105/205, while being much stiffer than typical adhesive sealants. .
|
#809 Notched Spreader from WEST SYSTEM
4'' x 4'' plastic spreader with 1/8'', 3/16'' and 1/4'' notches on three sides for quickly applying modified epoxy at a constant thickness.
|
#810 Fillable Caulking Tubes from WEST SYSTEM
These applicators are great for injecting large amounts of epoxy, laying a lengthy bead of epoxy or making fillets. Large-volume applicators for use with a standard caulking gun. . Suitable for refilling during continuous use. Should be disposed of after epoxy cures. . Holds approximately 10 fl. oz. . Package of 2.
|
#875 Scarfer™ from WEST SYSTEM
Use to create scarf joints like a pro A unique tool designed by Gougeon Brothers for cutting accurate scarf joints in plywood up to 3/8" thick.
|
Antifreeze, -100 Engine & Water System - Gallon from SEAFIT
West Marine Pure Oceans -100° (-73°C) Marine Antifreeze provides the ultimate in extreme cold weather and corrosion protection for drinking water systems and all engines. Its premium additive package prevents corrosion of aluminum, copper, brass and solder, but will not harm rubber, seals or hose materials. Provides burst protection to -100°F (-73°C) and freeze protection within a range of -58°F to -63°F (-50°C to - 52°C).
|
West Marine/SOSpenders PFD Rearming Kit, 3/8" Threaded Cylinder Neck Dia. from WEST MARINE
West Marine/SOSpenders PFD Rearming Kit Style: Automatic. Cylinder Weight: 38g. Cylinder Neck Diameter: 3/8" or 1/2" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: West Marine/SOSpenders PFD . Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
Snap Furl CF-700 Furling System from SCHAEFER
" Small boat furler comparison, Practical SailorSnapFurl systems come in two sizes to accommodate boats 16' to 24' and boats 24' to 28' and represents the latest in quality Schaefer design and engineering. The efficient Round Geon™ PVC foil snaps quickly and easily around your boat’s existing headstay without the need for special tools or modifications to the rig. System SnapFurl CF-500 for Boats 16’ to 24’ (4. Long fiber reinforced injection molded components make SnapFurl CF 500 unique.
|
$100 Gift Card from WEST MARINE
Not sure what to get for your favorite boater? Give the West Marine Gift Card! Use our Gift Card at more than 370 West Marine stores, online, or through our catalog at 1-800-BOATING for merchandise purchases and backorder or special order deposits. . SHIPPING NOTICE: Gift Cards shipping ground delivery will ship 1st Class Mail to any US address FREE. For an additional fee, Gift Cards may be shipped via US Priority Mail, Two-Day or Overnight service. The Gift Cards cannot be redeemed for cash.
|
$250 Gift Card from WEST MARINE
Not sure what to get for your favorite boater? Give the West Marine Gift Card! Use our Gift Card at more than 370 West Marine stores, online, or through our catalog at 1-800-BOATING for merchandise purchases and backorder or special order deposits. . SHIPPING NOTICE: Gift Cards shipping ground delivery will ship 1st Class Mail to any US address FREE. For an additional fee, Gift Cards may be shipped via US Priority Mail, Two-Day or Overnight service. The Gift Cards cannot be redeemed for cash.
|
Fuel System Treatment & Stabilizer from MERCURY MARINE
Fuel System Treatment & Stabilizer Prevents fresh fuel from degradation and oxidation. 1oz. treats six gallons of fuel. For two-and four-cycle engines. 16oz. plastic bottle.
|
West Marine SOS Kid’s Hybrid Rearming Kit from WEST MARINE
West Marine SOS Kid’s Hybrid Rearming Kit Style: Automatic. Cylinder Weight: 12g. Cylinder Neck Diameter: 3/8" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: SOS Kid’s Hybrid. Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
WM Self-Coiling Hose - 15' from WEST MARINE
Featuring an improved flow rate and field-serviceable couplings! With an improved flow rate of 360gph, this hose delivers a powerful stream of water to make deck and boat wash-downs quick and easy. In the unlikely event of a rupture, the couplings can be removed with common hand tools, the hose shortened and the couplings replaced, which is a big advantage if you happen to be offshore! 90% usable length. Field-serviceable couplings. Strain relief at hose connection end'. 360gph flow rate.
|
West Marine 1000/Offshore PFD Rearming Kit from WEST MARINE
West Marine 1000/Offshore PFD Rearming Kit Style: Manual. Cylinder Weight: 33g. Cylinder Neck Diameter: 1/2" bayonet. Inflator Type: Secumar 401. Kit Contents: Cylinder with seal indicator. PFD Brands Commonly Used With*: West Marine 1000/Offshore PFD . Inflator Number: 401. *The term "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
|
from WEST SYSTEM, from WESTERN PACIFIC TRAD
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
200
300
400
500
600
700
800
900
1,000
1,120
1,130
1,140
1,150
1,160
1,170
1,180
1,190
1,200
1,210
1,211
1,212
1,213
1,214
1,215
1,216
1,217
1,218
1,219
1,220
1,221
1,222
1,223
1,224
1,225
1,226
1,227
1,228
1,229
1,230
1,231
1,232
1,233
1,234
1,235
1,236
1,237
1,238
1,239
1,240
1,250
1,260
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Epoxy Resin->#101 Repair Packs
Here is everything you need to complete small repairs around the boat, shop or home. #101 Handy Repair Pack - Convenient kit contains enough material to complete one repair. Two 16g. packets of #105 Resin . Two 3. 2g. packets of #205 Hardener . 3. 5g. High Density Filler . 1 application brush .
Part No: 101
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->#410 Microlight Filler
The ideal low-density filler for creating a light, easily-worked fairing compound especially suited for fairing large areas. Microlight™ mixes with greater ease than #407 Low-Density filler or microballoons and is approximately 30% easier to sand. Feathers to a fine edge and is also more economical for large fairing jobs. . Not recommended under dark paint. Not recommended on surfaces subjected to high temperatures. . Cures to a tan color.
Part No: 410-7
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->West System Application Videos & Technical Books
WEST SYSTEM® Technical Books—Guide you through a wide range of projects and repairs These books are chock-full of important of information on recommended product usage, applications, and step-by-step instructions for a wide variety of projects, including blister repair, deck reinforcement, lamination repair, closing of punctures and holes, dry rot repairs and more. Specific step-by-step instructions. Helpful illustrations.
Part No: 002-970
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Vacuum Bagging Materials
Vacuum bagging is a clamping system used for laminating a wide range of fabrics, core materials and veneers. It offers many advantages over conventional clamping. By laminating over simple molds, composites can be molded into a wide range of functional shapes. #879 Release Fabric Economical Release Fabric is a tough, finely woven nylon fabric treated with a release agent. Peels easily and leaves a smooth textured surface, ready for bonding or finishing. Available in 60" wide x 2 yd.
Part No: 885-5
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Episize™ Unidirectional Carbon Tape
Episize™ Unidirectional Carbon Tapes Carbon fiber unidirectional reinforcing tapes are used to improve tensile and compressive strength and stiffness in one direction while adding minimum thickness and weight. Fiber bundles are held in place by a polyester fill thread for easy handling and wet out. . 015" thickness. #702 (144k fibers/inch width) 11/2" wide x 12' or 50' rolls.
Part No: 703-12
|
|
|
|
Home -> Paint & Maintenance -> Caulking & Adhesives -> Adhesives, Glue & Tape->G/5 Five-Minute Adhesive
Makes quick repairs a cinch G/5 is an easy to use, 2-part resin/hardener adhesive system for quick repairs, tooling and general bonding. May be used in spot applications to hold parts in position while standard epoxy bonds cure. Bonds to wood, fiberglass and metal. Not recommended for long-term bonds subject to high loads or moisture. One-to-one mixture, no pumps are required.
Part No: 865-16
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Large Capacity Metering Pumps
306-25 - 5:1 Ratio Metering Pump For metering larger quantities of 105 Resin and 205 or 206 (5:1 ratio) Hardeners. The 306-25 Pump will reduce mixing time and waste on large projects. Reservoirs hold one gallon of resin, one quart of hardener. Dispenses approximately 0. Can be converted to a 3:1 ratio. 306-23 - 3:1 Ratio Metering Pump Similar to 306-25 Metering Pump described above. Can be converted to a 5:1 ratio. 309 High-Capacity Gear Pump For use with 205 or 206 (5:1 ratio) Hardeners.
Part No: 306-25
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass
Avoid skin irritation by using this protective cream A protective barrier cream helps protect skin from irritants. Use with protective gloves. One 5oz.
Part No: 831
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->#406 Colloidal Silica
406 Colloidal Silica is a thickening additive used to control the viscosity of the epoxy and prevent epoxy runoff in vertical and overhead joints. 406 is a very strong filler that creates a smooth mixture, ideal for general bonding and filleting. It is also our most versatile filler. Often used in combination with other fillers, it can be used to improve the improve strength, abrasion resistance, and consistency of fairing compounds, resulting in a tougher, smoother surface.
Part No: 406-2
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Epoxy Color Pigments
WEST SYSTEM pigments are epoxy-based liquid colorants used to tint the epoxy mixture to provide an even color base for the final finish system. Cured, pigmented epoxy surfaces are not a final finish surface, but require an additional opaque or UV filter coating for ultraviolet protection. Add to the mixed resin/hardener at a rate of approximately one teaspoon of pigment to 8 fl oz of epoxy. More pigment will increase opaqueness and mixture viscosity. 501 White Pigment - One 4 oz. - One 4 oz.
Part No: 503-8
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->G/Flex 655 Thickened Epoxy
G/flex 655 Thickened Epoxy Adhesive comes with a thickening agent already added. G/flex offers important features: Toughness and Flexibility G/flex has been toughened. With a modulus of elasticity of 150,000 psi (WEST SYSTEM 105 Resin/205 Hardener has a modulus of elasticity of 450,000 psi), G/flex is more flexible and can deflect further than WEST SYSTEM 105/205, while being much stiffer than typical adhesive sealants. Bonds to wet and damp surfaces G/flex has the ability to glue damp woods.
Part No: 655-CH
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Large Capacity Metering Pumps
306-25 - 5:1 Ratio Metering Pump For metering larger quantities of 105 Resin and 205 or 206 (5:1 ratio) Hardeners. The 306-25 Pump will reduce mixing time and waste on large projects. Reservoirs hold one gallon of resin, one quart of hardener. Dispenses approximately 0. Can be converted to a 3:1 ratio. 306-23 - 3:1 Ratio Metering Pump Similar to 306-25 Metering Pump described above. Can be converted to a 5:1 ratio. 309 High-Capacity Gear Pump For use with 205 or 206 (5:1 ratio) Hardeners.
Part No: 306-23
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Adhesives
Six10 Adhesive gives you the strength and reliability of a two-part WEST SYSTEM epoxy with the convenience of a single part product. Offered in a convenient, self-metering cartridge, Six10 is for permanent, waterproof, structural gap filling and gluing. Bonds to wood, fiberglass, metals and masonry. With the included 600 Static Mixer attached, you can dispense fully-mixed adhesive right where you need it, using a standard caulking gun. and takes high loads in 24 hrs. ) of resin and hardener .
Part No: 610
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass
Additional 600 Static Mixers may be purchased separately and are sold in packages of two.
Part No: 600-2
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass
A thickening additive used to control the viscosity of the epoxy and prevent epoxy runoff in vertical and overhead joints. 406 is a very strong filler that creates a smooth mixture ideal for general bonding and filleting. WEST SYSTEM'S most versitile filler.
Part No: 406B
|
|
|
|
Home -> Engine Systems -> Engine Parts->Hotshield Fiberglass Tape
This insulating fiberglass tape is the proper way to contain the heat radiated by hot manifolds, exhaust pipes and mufflers. Simply wrap the tape around the manifold, exhaust pipe or muffler, and secure with locking wire. 10 feet of . 041" stainless steel locking wire included.
Part No: 20001
|
|
|
|
Home -> Engine Systems -> Engine Parts->Hotshield Fiberglass Tape
This insulating fiberglass tape is the proper way to contain the heat radiated by hot manifolds, exhaust pipes and mufflers. Simply wrap the tape around the manifold, exhaust pipe or muffler, and secure with locking wire. 10 feet of . 041" stainless steel locking wire included.
Part No: 20010
|
|
|
|
Home -> Engine Systems -> Engine Parts->PTFE Flax or TefPack Packing
Less friction means less heat and lower wear with a tighter fit. Each roving is dipped in P. T. F. E. and then woven into a tight square braid. The lubricating P. T. F. E. lasts the life of the packing.
Part No: 10019
|
|
|
|
Home -> Engine Systems -> Engine Parts->PTFE Flax or TefPack Packing
Less friction means less heat and lower wear with a tighter fit. Each roving is dipped in P. T. F. E. and then woven into a tight square braid. The lubricating P. T. F. E. lasts the life of the packing.
Part No: 10241
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Hotshield Wraps
These are the perfect solution to those small heat sensitive jobs in the engine compartment or muffler/manifold area. Each Hotshield Mini roll comes with a 10 foot coil of stainless steel locking wire to hold the tape in place. 1/8 x 2 x 25.
Part No: 20026
|
|
|
|
Home -> Engine Systems -> Engine Parts->PTFE Flax or TefPack Packing
Less friction means less heat and lower wear with a tighter fit. Each roving is dipped in P. T. F. E. and then woven into a tight square braid. The lubricating P. T. F. E. lasts the life of the packing.
Part No: 10240
|
|
|
|
Home -> Engine Systems -> Engine Parts
Less friction means less heat and lower wear with a tighter fit. Each roving is dipped in P. T. F. E. and then woven into a tight square braid. The lubricating P. T. F. E. lasts the life of the packing.
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs->Hotshield Wraps
These are the perfect solution to those small heat sensitive jobs in the engine compartment or muffler/manifold area. Each Hotshield Mini roll comes with a 10 foot coil of stainless steel locking wire to hold the tape in place. 1/8 x 2 x 25.
Part No: 20017
|
|
|
|
Home -> Engine Systems -> Engine Parts->PTFE Flax or TefPack Packing
Less friction means less heat and lower wear with a tighter fit. Each roving is dipped in P. T. F. E. and then woven into a tight square braid. The lubricating P. T. F. E. lasts the life of the packing.
Part No: 10020
|
|
|
|
Home -> Engine Systems -> Engine Parts->PTFE Flax or TefPack Packing
Less friction means less heat and lower wear with a tighter fit. Each roving is dipped in P. T. F. E. and then woven into a tight square braid. The lubricating P. T. F. E. lasts the life of the packing.
Part No: 10021
|
|
|
|
Home -> Engine Systems -> Engine Parts->PTFE Flax or TefPack Packing
Less friction means less heat and lower wear with a tighter fit. Each roving is dipped in P. T. F. E. and then woven into a tight square braid. The lubricating P. T. F. E. lasts the life of the packing.
Part No: 10017
|
|
|
|
Home -> Engine Systems -> Engine Parts->PTFE Flax or TefPack Packing
Less friction means less heat and lower wear with a tighter fit. Each roving is dipped in P. T. F. E. and then woven into a tight square braid. The lubricating P. T. F. E. lasts the life of the packing.
Part No: 10018
|
|
|
|
Home -> Engine Systems -> Engine Parts->PTFE Flax or TefPack Packing
Less friction means less heat and lower wear with a tighter fit. Each roving is dipped in P. T. F. E. and then woven into a tight square braid. The lubricating P. T. F. E. lasts the life of the packing.
Part No: 10016
|
|
|
|
Home -> Engine Systems -> Engine Parts->PTFE Flax or TefPack Packing
Less friction means less heat and lower wear with a tighter fit. Each roving is dipped in P. T. F. E. and then woven into a tight square braid. The lubricating P. T. F. E. lasts the life of the packing.
Part No: 10242
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Bronze Wool Pads, Fine
The advantages of steel wool without the rustUse in place of steel wool. (Unlike steel wool, bronze wool will not leave particles behind that turn to rust and stain your boat!) Three-pack.
Part No: 35000
|
|
|