Top Sellers
Fluorescent Sailing Knife from WICHARD
Find this knife in the dark! Half-serrated stainless steel blade cuts heavy materials and composite ropes without dulling. Glow-in-the-dark handle makes it easy to locate. Features a 2-7/8"L locking blade, shackle key, and marlin spike. 7-1/8"L open.
|
2-3/4"L Small Swivel Bail Shackle, 5/8" Snap, 7/16" Bail, 2645lb. MWL from WICHARD
Highest quality drop-forged 17-4 PH stainless-steel shackles are beautifully polished, with smooth contours. Great strength and reliability.
|
Snap Hook, 4"L, 3300lb. Breaking Strength from WICHARD
Drop-forged from 316L stainless steel for outstanding strength.
|
Large Fixed Bail Snap Shackle from WICHARD
All our snap shackles are hot drop forged from high resistance stainless steel. Only forging creates a superior steel product, by increasing its elasticity and maximizing the steel's internal strength. A forged snap shackle will deform long before breaking; it will not burst or break suddenly.
|
Flex Trim - Black 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.
|
Tach Diesel Mag. P.U. 4000 rpm from TELEFLEX
A popular choice for gas and diesel inboard engines, White Premier instruments feature white dials with modern black and blue graphics and superior light pipe illumination. When illuminated, black dial grads and pointer become red. Fog-resistant design for enhanced readability.
|
Braided Polyester Cord, by the Foot from NEW ENGLAND ROPES
A low-stretch cord that’s great for flag halyards, foredeck netting, or light-air spinnaker sheets. Sold by the foot. Diameter: 1/8". Best use: Utility cord, flag halyards . Construction: Braided polyester . Breaking strength: 530lb. . Stretch: 3% at 15% of breaking strength .
|
50' Braided Polyester Cord from NEW ENGLAND ROPES
A low-stretch cord that’s great for flag halyards, foredeck netting, or light-air spinnaker sheets. Length: 50'. Diameter: 1/8". Best use: Utility cord, flag halyards . Construction: Braided polyester . Breaking strength: 530lb. . Stretch: 3% at 15% of breaking strength .
|
Mainsail Feeder from SPINLOCK
Graphite-loaded, anodized alloy rollers guide the bolt rope making heavy, stiff mainsails easy to hoist. 3/32" gap fits bolt ropes to 7/16"dia. Easily installs and may be repositioned via two flathead screws which tighten a 3/8"dia.
|
20" x 20" Shade/Screen, Fits Lewmar Hatches, White from SKYSHADE
New screen and shade solution provides the ultimate in heat and light reflection with bug free ventilation for onboard comfort. Combines a retractable hatch shade and flyscreen system in a low-profile styled cassette. Made in extruded polymer and comes with integral hatch liner option, matching hatch corner radii and in three sizes available with round hatch adapter. Installation is simple to fit with four one piece corner mounted screws with integral screw caps . Available in white or beige.
|
1-7/8" Brass Standard Hasp from ABI
Highly polished brass . Fixed eye (does not swivel). 1"w x 1-7/8"L. Padlock hole diameter 5/16" .
|
1/4" NPT X 3/8" Brass hose barb from MOELLER
1/4 NPT X 3/8" Brass Hose barbs with male threads.
|
3/8" NPT Aluminum hose barb from MOELLER
3/8 NPT X 3/8" Aluminum hose barb with male threads.
|
Small Recessed Transom Shower from SHURFLO
Ideal for mounting to any horizontal surface. Kit includes spray nozzle, hose and necessary hardware for easy installation. White. Material: ABS plastic . Dimensions: 3-7/8"H x 3"W x 2-7/8"L . Port Sizes: 1/2" NPT . Clearance: 2-1/4" .
|
20 Amp Pushbutton Thermal Circuit Breaker from SIERRA
Very common pushbutton breakers for DC loads. Uses two-blade terminals. Mounts in 3/8" hole. Can be used with a waterproof boot over the button. Buttons are white. Switch Type: Pushbutton . Voltage Compatibility: DC . Safety Features: Waterproof boots available . Housing Material: Plastic . Housing Dimensions: 1. 75" x 1.
|
|
32") from WICHARD, 8"L from WICHARD, White from WICHARD
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
200
300
400
500
600
700
800
900
1,000
1,130
1,140
1,150
1,160
1,170
1,180
1,190
1,200
1,210
1,219
1,220
1,221
1,222
1,223
1,224
1,225
1,226
1,227
1,228
1,229
1,230
1,231
1,232
1,233
1,234
1,235
1,236
1,237
1,238
1,239
1,240
1,241
1,242
1,243
1,244
1,245
1,246
1,247
1,248
1,250
1,260
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Watertight U-Bolts
Watertight rubber collar eliminates noise, vibration and leaking. Collar incorporates top plate and completes a good-looking installation. Bent stainless steel U-Bolts have metric threads.
Part No: 65332
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->High-Resistance “D” Shackles
Legendary for their quality, beautiful polish and smooth contours. Drop-forged stainless steel ensures that the shape remains intact at loads that meet or exceed the deformation point (unlike cast stainless steel). Approx. ShWt . 5. High-Resistance “D” Shackles Forged from 17.
Part No: 11206HR
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Bow, Keypin, “D,” Long “D” & Twisted “D” Shackles
Legendary for their quality, beautiful polish and smooth contours. Drop-forged stainless steel ensures that shape remains intact at loads that meet or exceed the deformation point.
Part No: 1425
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang
Based on the same principal as the friction brakes that mountaineers use to control their descent during a rappel, this simple device offers an easy way to tame otherwise dangerous gybes. It safely controls the speed of the boom’s motion during a gybe, and also locks the boom in one position. The Boom Brake has three settings to adjust the friction on the line that passes through the device. Configurations of one, two, or three wraps are possible to accommodate different degrees of load. ft.
Part No: 07150
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Bow, Keypin, “D,” Long “D” & Twisted “D” Shackles
Legendary for their quality, beautiful polish and smooth contours. Drop-forged stainless steel ensures that shape remains intact at loads that meet or exceed the deformation point.
Part No: 1243
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Bow, Keypin, “D,” Long “D” & Twisted “D” Shackles
Legendary for their quality, beautiful polish and smooth contours. Drop-forged stainless steel ensures that shape remains intact at loads that meet or exceed the deformation point.
Part No: 1245
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Bow, Keypin, “D,” Long “D” & Twisted “D” Shackles
Legendary for their quality, beautiful polish and smooth contours. Drop-forged stainless steel ensures that shape remains intact at loads that meet or exceed the deformation point.
Part No: 1444
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
Drop-forged and remarkably strong, these pad eyes handle high operating loads, yet fold down when not in use. Silicone pad prevents vibration. Stock Diameter: 1/4". Hole Spacing: 1-1/16". Length: 1-3/4". Opening: 9/16". Pin Diameter: 1/4". Maximum SWL: 4,400lb. Fasteners: 1/4". 1.
Part No: 56504
|
|
|
|
Home -> Sailboat -> Rigging Products->Mechanical Backstay & Babystay Adjusters
These stay adjusters are easy to adjust using a large-diameter, hand-turned wheel. Constructed of stainless steel with a synthetic wheel. Affords about 6-3/4" of travel. Backstay adjuster features a 1/2" pin dia. Toggle jaw at each end. The babystay adjuster features a rugged pelican hook at the bottom for easy attachment, and a D shackle at the top. Safe Working Load: 7,700lb. functional load limit.
Part No: 5546
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Titanium Snap Shackles
Forged in HR stainless steel or Titanium. Designed and made in France. Available with swivel eye, large eye or swivel shackle. Ideal for spinnaker sheets. Outstanding working loads. Opens manually or with a fid.
Part No: 52657
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Furling Accessories
Before re-hoisting the bowman doesn’t need to remove the headsail from the luff grove, he just has to open the prefeeder and close it around the luff tape. To open, simply push the spring with your thumb, the jaws will open automatically. The prefeeder can be easily installed below any headsail foil or headsail reefing configuration. In the closed position, it ensures a smooth and easy sail hoist. Stainless-steel product benefiting from the Wichard know-how to offer the highest reliability.
Part No: 7485
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Keypin Shackles, Captive Pin
Wichard Keypin shackles are easily opened by a single half turn, bu tremains captive within the body of the shackle. Keypin shackles with a bar allows the line, thimble or grommet to remain attached to the shackle when the pin is released.
Part No: 01306
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Allen Head Pin Shackle for Batten Cars
Key pin shackles offer many advantages. The pin can easily be opened by a single half turn, but remains captive within the body of the shackle. The bar allows the line, thimble or grommet to remain attached to the shackle. This patented thimble shackle is strong, light and compact. Rope can be spliced directly over the glass fiber reinforced polypropylene molded shape. This eliminates the use of an additional thimble.
Part No: 1343
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
The pin can easily be opened by a single half turn, but remains captive within the body of the shackle. The bar allows the line, thimble or grommet to remain attached to the shackle. This patented thimble shackle is strong, light and compact. Rope can be spliced directly over the glass fiber reinforced polypropylene molded shape. This eliminates the use of an additional thimble. Allen head pin for clew points (snag-free connection). 5/16" diameter. 1-1/32" inside height.
Part No: 1304
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Allen Head Pin Shackle for Batten Cars
Key pin shackles offer many advantages. The pin can easily be opened by a single half turn, but remains captive within the body of the shackle. The bar allows the line, thimble or grommet to remain attached to the shackle. This patented thimble shackle is strong, light and compact. Rope can be spliced directly over the glass fiber reinforced polypropylene molded shape. This eliminates the use of an additional thimble.
Part No: 1344
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring
Made of grade 316L stainless steel. For 10 mm chain Ensures a safe anchoring by easing the tension on the anchor chain Protects the boat by reducing the chafe of the chain on rub rail and roller chock Positionned between two links of the chain (single handed operation) The locking set pin keeps it in position in any conditions.
Part No: 2985
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks
Simple mooring hook Perfect for fastenings to mooring buoys Can be adapted to any type of boat hook 120mm L.
Part No: 92327
|
|
|
|
Home -> Sailboat -> Blocks
Single, fixed head + clevis. Sheave dia: 70 mm . Rope size: 14 mm . 8 mm forged shackle. 1500lb. working load. 2000lb.
Part No: 65117
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Snap Hooks
Stainless steel, asymmetric, with eye.
Part No: 2327
|
|
|
|
Home -> Engine Systems -> Engine Parts->Cooling Pumps
Typical pump features include: proven original equipment impellers, high quality brass housings, mechanical seals, wearplates, stainless steel covers, stainless steel hardware, and hardened shafts.
Part No: G9901
|
|
|
|
|
Home -> Engine Systems -> Engine Parts->Cooling Pumps
Typical pump features include: proven original equipment impellers, high quality brass housings, mechanical seals, wearplates, stainless steel covers, stainless steel hardware, and hardened shafts.
Part No: G907P
|
|
|
|
Home -> Engine Systems -> Engine Parts
For use with pumps R50G, R30G and E05.
Part No: 10996
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Cooling Systems
For use with pump P105.
Part No: 19354
|
|
|
|
|
Home -> Engine Systems -> Engine Parts->Cooling Pumps
Typical pump features include: proven original equipment impellers, high quality brass housings, mechanical seals, wearplates, stainless steel covers, stainless steel hardware, and hardened shafts.
Part No: E35
|
|
|
|
|
Home -> Engine Systems -> Engine Parts->Cooling Pumps
Typical pump features include: proven original equipment impellers, high quality brass housings, mechanical seals, wearplates, stainless steel covers, stainless steel hardware, and hardened shafts.
Part No: G9903
|
|
|
|
Home -> Plumbing -> General Purpose Pumps->Impeller Kits
Each kit includes Engine Specified Impeller, - all necessary O-rings and Gaskets for up to 50 different model Sherwood Pumps, Technical Guide, with Trilingual Identification in a new robust clam shell case.
Part No: 09959K
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Cooling Systems
For use with pumps G9903, 370, G95-1, G9901, G9902, G21, G22 and k758.
Part No: 12665
|
|
|
|
|
Home -> Engine Systems -> Engine Parts
For use with pumps G7B, G50, G85, M71, L90, G26 and L10B.
Part No: 23977
|
|
|
|
|
Home -> Plumbing -> General Purpose Pumps->Impeller Kits
Each kit includes Engine Specified Impeller, - all necessary O-rings and Gaskets for up to 50 different model Sherwood Pumps, Technical Guide, with Trilingual Identification in a new robust clam shell case.
Part No: 10077K
|
|
|
|
|
Home -> Engine Systems -> Engine Parts
For use with pumps M71, 67B and L10B.
Part No: 23976
|
|
|
