Welcome! Please Sign-In
Top Sellers
Rule-A-Matic Plus Float Switch from RULE INDUSTRIES
Rule-A-Matic Plus Float Switch from RULE INDUSTRIES
Is the float switch working? It's easy to check! Features a Rule-A-Matic float switch and an impact-resistant cover to protect against debris and jamming. Wiring is "blocked" by a rubber grommet to provide strain relief. Includes a convenient feature for manual tests. Activation Method: Float with mechanical contacts. Dimensions: 2-3/4"H x 2-1/2"W x 4-7/8"L. Capacity: 20A @ 12/24/32V DC.
Zinc Grouper Anode from CANADA METALS
Zinc Grouper Anode from CANADA METALS
Supplements your boat's existing anodes An excellent anodic device to supplement a vessel’s existing anode system, especially to counteract stray current from defective shore power. Clip to bolt on outdrive. Clip to grounding strap if possible or wire items together with copper wire and clip to wire. Do not connect to negative battery terminals. Dimensions: 8 1/4"L x 3 1/4"W x 1 3/8"D.
Trim Tab Zinc Anode from CANADA METALS
Trim Tab Zinc Anode from CANADA METALS
Attaches to standard Bennett trim tabs where actuator bolts to plate.
Aluminum Anode Kit Bravo II & III from CANADA METALS
Aluminum Anode Kit Bravo II & III from CANADA METALS
Offered in aluminum, for use in salt or brackish water, or magnesium, for freshwater only.
10 Micron Diesel Fuel Filter/Water Separator with Metal Bowl from RACOR-PARKER FILTRAT
10 Micron Diesel Fuel Filter/Water Separator with Metal Bowl from RACOR-PARKER FILTRAT
Racor’s Aquabloc filter media removes virtually 100% of water and solid contaminants. Filters have die-cast aluminum heads and come in different sizes for diesel engines and any rate of fuel flow. To be used on the suction side of the pump. See-thru bowls allow visual inspection for water; metal bowls are recommended for use in areas of high heat and are required by the US Coast Guard on inboard engines and gensets. Inlets/Outlets: 1/4" NPT female . Bowl Material: See-thru polymer .
Boeshield T-9 Spray Lube from BOESHIELD
Boeshield T-9 Spray Lube from BOESHIELD
Penetrates, lubricates and protects This combination of solvents, lubricants and waxes was designed to penetrate, lubricate and protect surfaces, and to displace moisture. It dries to a thin, waxy, corrosion-preventing film that clings to metal for months. It will loosen rusty and corroded parts and is safe on paints, plastics and vinyls. Aerosol spray gets into cracks and crevices. 12oz.
Power Bubbles 12V DC Aerator from MARINE METALS
Power Bubbles 12V DC Aerator from MARINE METALS
This system runs on low current as it's dual bellows aerate up to 2L per minute of air. It saturates circulating water with oxygen. Double discharge allows aeration of one or two livewells. Increases flow capacity. Includes 10' of air tubing. Two large airstones allow the pump to be mounted in any protected area. Suitable for fresh or saltwater. Two anti-siphon valves protect pump against water intrusion. Quietly operates with solid-state circuits. Draw: 1/4A at 12V DC.
Sta-Bil Gas Stabilizer - 8oz. from STA-BIL
Sta-Bil Gas Stabilizer - 8oz. from STA-BIL
Guards against gum and varnish in fuelKeeps stored fuel fresh indefinitely so your engine will start easily even after being stored all winter. Prevents gum and varnish buildup and protects metal surfaces from corrosion. Use for storing up to 12 months. 8oz.
Lube Tube Adapter for Yamaha, Nissan, Tohatsu, Honda (2-50hp) from WEST MARINE
Lube Tube Adapter for Yamaha, Nissan, Tohatsu, Honda (2-50hp) from WEST MARINE
Marine lower unit drain, flush and fill tool. Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefishier lower units. Quick, easy and clean way to change marine lower unit gear lube. For use with all 8- and 10-oz.
Sanding Discs - 5" Velcro-Backed, 40-Grit, 5 Pack from 3M PRODUCTS
Sanding Discs - 5" Velcro-Backed, 40-Grit, 5 Pack from 3M PRODUCTS
Convenient hook and loop disk attachmentAdapts a 1/4” or 3/8” electric drill so it may be used as a 5” disc sander. Includes three Velcro-backed sanding discs (120-, 80- and 40-grit). Recommended Usage: Sanding fiberglass/gelcoat, paint, wood and metal. Abrasive Material: Aluminum oxide. Backing Type: Hook and loop . Disc Size: 5" disc .
Fuel Filter/Water Separator, 15/35gph Max. Flow, 6"H x 3.2"W x 3.2"D, Metal Bowl from RACOR-PARKER FILTRAT
Fuel Filter/Water Separator, 15/35gph Max. Flow, 6"H x 3.2"W x 3.2"D, Metal Bowl from RACOR-PARKER FILTRAT
Racor's famous Aquabloc® filter media separates water into the bottom of the drain bowl and ensures virtually 100% removal of water and solid contaminants. Filters come in different sizes for gasoline engines and any rate of fuel flow. Designed for use on the suction side of pump. All filters feature a die-cast aluminum head which is anodized and painted. Standard pipe-to-hose barbs are used for installation. Inlets/Outlets: 1/4" NPT, except 3/8" NPT on 660 series .
Eisenglass & Plastic Restoration Kit from FLITZ
Eisenglass & Plastic Restoration Kit from FLITZ
Restore clarity to yellow, hazy or cloudy eisenglass, Plexiglass, plastics, gelcoat and fiberglass the fast and easy way with this kit. Kit includes: 7" diameter. Washable Flitz Buffing Ball for use with any 3/8" drill motor. 1. 76oz. tube Flitz Metal, Fiberglass & Plastic Polish. 1. 7oz.
1/8" Endura 12 Dyneema Single Braid, 2,100lb. Breaking Strength from NEW ENGLAND ROPES
1/8" Endura 12 Dyneema Single Braid, 2,100lb. Breaking Strength from NEW ENGLAND ROPES
Extremely high strength-to-weight ratio! Excellent strength-to-weight ratio, ultra-low elongation, excellent flexibility and wet/dry strength retention, torque-free, and it floats. Constructed from Dyneema SK-75, Endura 12 has a proprietary urethane coating for improved abrasion resistance. Best Use: Halyards, sheets, low-stretch control lines, guys, slings/hoisting ropes . Construction: 12-strand single braid . Core Fiber/Construction: Coated Dyneema SK-75 . 0% at 30% of breaking strength .
Rounded Oval, 8-1/2"W x 11-1/4"L x 5-1/4"D, 1" Flange, 1-1/2" Drain from AMBASSADOR MARINE
Rounded Oval, 8-1/2"W x 11-1/4"L x 5-1/4"D, 1" Flange, 1-1/2" Drain from AMBASSADOR MARINE
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.
Marine-Tex Putty, Gray, 14oz. from TRAVACO
Marine-Tex Putty, Gray, 14oz. from TRAVACO
Versatile epoxy putty for wide variety of repairs Repairs damaged hulls and equipment stronger than before. Fixes gel coat chips and leaks in fuel tanks, water tanks, piping, engine blocks, cracked crank cases, etc. Can be used in working temperatures of -40° to 250°F. Marine-Tex bonds to all metals, plastics, plywood, etc. Handles like putty. Formulation: Two-part epoxy putty . Recommended Usage: Bonds to aluminum, PVC, fiberglass, most plastics, metals, glass, cement and hard/soft woods .

000 from CANADA METALS, 8"L from CANADA METALS, 12" from CANADA METALS

Outdrive Anode Kit , Magnesium, MerCruiser, CM55989KITM from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes->Outdrive Anodes, MerCruiser
Sold in pairs or, where indicated, in kits which include hardware.
Part No: CM55989KITM
Outboard Anode, Mercury/Force/Mariner, Zinc, CM822157C2Z from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes->Outboard Anode, Mercury/Force/Mariner
Outboard Anodes - Mercury/Force/Mariner Manufacturer: Canada Metals.
Part No: CM822157C2Z
Outboard Anode, Zinc, CM393023Z from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes->Outboard Anodes, OMC/Johnson/Evinrude
Outboard Anodes - OMC/Johnson/Evinrude Manufacturer: Canada Metals.
Part No: CM393023Z
LC Collar Anode - 1 3/8"shaft x 3"dia. x 1 1/4"L from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes->Limited Clearance (LC) Collar Anodes
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.
Part No: CMC06
Outdrive Anode, Zinc, MerCruiser, CM806105Z from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes->Outdrive Anodes, MerCruiser
Sold in pairs or, where indicated, in kits which include hardware.
Part No: CM806105Z
Streamlined Collar Anode - 1 1/2"shaft x 2 1/2"dia. x 2 1/2"L from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes->Zinc Streamlined Collar Anodes
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.
Part No: CMX07
#3002 Queen Charlotte Sound to/à Dixon Entrance, 525,000 from CANADA METALS Home -> Navigation -> Charts & Chart Catalogs -> Canada->Pacific Coast of Canada Charts
Nautical charts show hazards, aids to navigation, features along the shoreline and the seafloor, as well as man-made and natural features of the area. Large-scale insets of the most frequented small craft havens Photographs of the approaches to harbors and channels Important geographic reference points Each chart also contains a narrative with descriptions of navigation aids and dangers, tide and current characteristics, and information on supplies and facilities at anchorages.
Part No: 3002
#3513 Strait of Georgia, Northern Portion/Partie Nord, 80,000 from CANADA METALS Home -> Navigation -> Charts & Chart Catalogs -> Canada->Pacific Coast of Canada Charts
Nautical charts show hazards, aids to navigation, features along the shoreline and the seafloor, as well as man-made and natural features of the area. Large-scale insets of the most frequented small craft havens Photographs of the approaches to harbors and channels Important geographic reference points Each chart also contains a narrative with descriptions of navigation aids and dangers, tide and current characteristics, and information on supplies and facilities at anchorages.
Part No: 3513
Streamlined Collar Anode - 1 1/8" Slot x 2 1/8"dia. x 2 1/8"L from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes->Zinc Streamlined Collar Anodes
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.
Part No: CMX04S
Outboard Anode, Yamaha, Zinc, CM61A4537100Z from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes->Outboard Anodes, Yamaha
Outboard Anodes - Yamaha Manufacturer: Canada Metals.
Part No: CM61A4537100Z
Outdrive Anode, Zinc, MerCruiser, CM865182Z from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes->Outdrive Anodes, MerCruiser
Sold in pairs or, where indicated, in kits which include hardware.
Part No: CM865182Z
Streamlined Collar Anode Zinc, 1/2"shaft x 1 5/8"dia. x 1 15/16"L, CMX00 from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes -> Shaft/Prop Nut Anodes->Zinc Streamlined Collar Anodes
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.
Part No: CMX00
Zinc, Omc-983494 Outdrive from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes->Zinc Outboard Anode - OMC 393023
Zinc Outboard Anode - OMC #393023.
Part No: CM983494Z
LC Collar Anode - 1 3/4"shaft x 3 1/2"dia. x 1 3/8"L from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes->Limited Clearance (LC) Collar Anodes
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.
Part No: CMC08
#3459 Approaches to/Approches à Nanoose Harbour, 15,000 from CANADA METALS Home -> Navigation -> Charts & Chart Catalogs -> Canada->Pacific Coast of Canada Charts
Nautical charts show hazards, aids to navigation, features along the shoreline and the seafloor, as well as man-made and natural features of the area. Large-scale insets of the most frequented small craft havens Photographs of the approaches to harbors and channels Important geographic reference points Each chart also contains a narrative with descriptions of navigation aids and dangers, tide and current characteristics, and information on supplies and facilities at anchorages.
Part No: 3459
#3679 Quatsino Sound, 50,000 from CANADA METALS Home -> Navigation -> Charts & Chart Catalogs -> Canada->Pacific Coast of Canada Charts
Nautical charts show hazards, aids to navigation, features along the shoreline and the seafloor, as well as man-made and natural features of the area. Large-scale insets of the most frequented small craft havens Photographs of the approaches to harbors and channels Important geographic reference points Each chart also contains a narrative with descriptions of navigation aids and dangers, tide and current characteristics, and information on supplies and facilities at anchorages.
Part No: 3679
#3441 Haro Strait, Boundary Pass and/et Satellite Channel, 40,000 from CANADA METALS Home -> Navigation -> Charts & Chart Catalogs -> Canada->Pacific Coast of Canada Charts
Nautical charts show hazards, aids to navigation, features along the shoreline and the seafloor, as well as man-made and natural features of the area. Large-scale insets of the most frequented small craft havens Photographs of the approaches to harbors and channels Important geographic reference points Each chart also contains a narrative with descriptions of navigation aids and dangers, tide and current characteristics, and information on supplies and facilities at anchorages.
Part No: 3441
#3541 Approaches to/Approches à Toba Inlet, 40,000 from CANADA METALS Home -> Navigation -> Charts & Chart Catalogs -> Canada->Pacific Coast of Canada Charts
Nautical charts show hazards, aids to navigation, features along the shoreline and the seafloor, as well as man-made and natural features of the area. Large-scale insets of the most frequented small craft havens Photographs of the approaches to harbors and channels Important geographic reference points Each chart also contains a narrative with descriptions of navigation aids and dangers, tide and current characteristics, and information on supplies and facilities at anchorages.
Part No: 3541
LC Collar Anode - 7/8"shaft x 2 1/8"dia. x 1"L from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes -> Shaft/Prop Nut Anodes->Limited Clearance (LC) Collar Anodes
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.
Part No: CMC02
Zinc Beneteau Replacement - 35mm from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes->Beneteau Prop Nut Anode
.
Part No: CMAN235
Streamlined Anodes w/Wire - 6"L x 3"W x 3/4" thickness from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes -> Hull/Rudder/Engine Anodes->Hull Anodes
Hull Anodes Rigorously tested to ensure consistency and quality.
Part No: CMPNWZ
Canada Metal Outdrive Anode - Volvo 872793Z from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes->Canada Metal Outdrive Anode - Volvo 3855411
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface. When the anode is almost dissolved, it needs to be replaced. Canada Metal uses a special steel combination fastener that makes it possible to use their Balldriver, which is a hex driver with a universal ball tip, to make easy adjustments.
Part No: CM872793Z
MDIVER - 1/2" x 6/12" from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes -> Hull/Rudder/Engine Anodes->Hull Anodes
Hull Anodes Rigorously tested to ensure consistency and quality.
Part No: CMDIVERM
Streamlined Collar Anode - 2" Slot x 3 1/4"dia. x 2 7/8"L from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes -> Shaft/Prop Nut Anodes->Zinc Streamlined Collar Anodes
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.
Part No: CMX09S
Anode, Aluminum, MerCruiser Stern Drive, CM806189A from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes->Aluminum Anodes for MerCruiser Stern Drive
Aluminum Anodes for MerCruiser Stern Drive Where indicated, sold as a kit.
Part No: CM806189A
Streamlined Collar Anode - 1"Mag x 2 1/8"dia. x 2 1/8"L from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes->Zinc Streamlined Collar Anodes
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.
Part No: CMX03M
Outboard Anode Kit, Magnesium, CM818298KITM from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes->Outboard Anode, Mercury/Force/Mariner
Outboard Anodes - Mercury/Force/Mariner Manufacturer: Canada Metals.
Part No: CM818298KITM
Anode Kit-Bravo3 Add-on Alum from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes->Alpha I, Bravo I, Bravo II/III Outdrive & Verado Outboard Aluminum & Magnesium Anode Kits
Offered in aluminum, for use in salt or brackish water, or magnesium, for freshwater only.
Part No: CMBRAVO3ADDKITA
Zinc outboard anode, Suzuki CM3C7602181A0Z from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes->Outboard Anodes, Suzuki, Zinc
Zinc Outboard Anodes for Suzuki engines.
Part No: CM3C7602181A0Z
Outboard Anode, Magnesium, CM123009M from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes->Outboard Anodes, OMC/Johnson/Evinrude
Outboard Anodes - OMC/Johnson/Evinrude Manufacturer: Canada Metals.
Part No: CM123009M
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics12