Top Sellers
High Gloss Gelcoat Compound Gallon from 3M PRODUCTS
Leaves a high gloss finish without wheel or swirl marksRemove fine scratches from production gel coat. Unique formulation reduces slinging while buffing and leaves a high gloss finish without wheel or swirl marks. Contains no wax or silicone.
|
Chafe Tape from 3M PRODUCTS
Adhesive-backed cloth chafe tape is made to wrap thimbles, docklines, and other points subject to wear.
|
Cleaner & Wax - Quart from 3M PRODUCTS
One-step processDesigned to remove light-to-medium oxidation, clean, polish and protect fiberglass gel coat and marine topside paints. A unique liquid formulation combines a compound with a special blend of waxes which restore shine and protect in one application.
|
WetOrDry™ Finishing Sandpaper - Ultra Fine 600 Grit, 5 Pack from 3M PRODUCTS
Ideal for wet sanding between coats of varnish, paint and other finishes. Made with silicon carbide, a sharp synthetic mineral that cuts fast and is satin smooth.
|
Scotchgard Marine Liquid Wax, 500ml from 3M PRODUCTS
Durable wax actually bonds to your boat's surfaceSpecial formulation uses reactive chemistry to actually bond to your boat’s surface and provide exceptionally high gloss with lasting durability. Protects gelcoat and topside coatings from damaging ultraviolet radiation, and is excellent for use on gelcoat, topside paints, painted aluminum and marine metal parts. Uses reactive chemistry to bond to your boat's surface. Exceptionally high gloss with lasting durability.
|
Marine Mildew Block from 3M PRODUCTS
Helps keep your boat fresh and looking like newUnique non-toxic formula provides long-lasting protection to help keep your boat fresh and looking like new. Works on virtually all surfaces above the waterline, including sails, seat cushions, carpeting, canvas, deck furniture, rub rails, showers, boat covers and vinyl. 16. 9oz. 16. 9oz.
|
Scotchgard Marine Liquid Wax, 1Liter from 3M PRODUCTS
Durable wax actually bonds to your boat's surfaceSpecial formulation uses reactive chemistry to actually bond to your boat’s surface and provide exceptionally high gloss with lasting durability. Protects gelcoat and topside coatings from damaging ultraviolet radiation, and is excellent for use on gelcoat, topside paints, painted aluminum and marine metal parts. Uses reactive chemistry to bond to your boat's surface. Exceptionally high gloss with lasting durability.
|
Fast Cure 5200 Sealant - White, 3 OZ from 3M PRODUCTS
Cures tack-free in just two hours The same performance as standard 5200, but becomes tack-free in just two hours and cures in 24 hours. White. Formulation: One-part polyurethane adhesive/sealant . Recommended Usage: Permanent bonding, above or below water. Extremely strong & flexible . Material Incompatibilities: Acrylics, Some plastics (ABS, Lexan) . Cure Time: Tack-free: 2 hrs. ; Complete cure: 24 hrs. . Cleanup: Mineral spirits or kerosene .
|
Scotch General Painting Masking Tape #2050 - 2" from 3M PRODUCTS
Use in a wide range of painting applicationsGeneral-purpose. Not for critical or extended outdoor use. Recommended Usage: General purpose masking or binding tape; adheres to previously painted or varnished surfaces . Material: Crepe paper with rubber resin adhesive . Removal Time: Three days .
|
Doodlebug Scrubbing Pad - Fine (White) from 3M PRODUCTS
Ideal for cleaning and scrubbing practically everything aboard. For cleaning and scrubbing virtually anything onboard .
|
5200 Polyurethane Adhesive/Sealant, White, 3oz. from 3M PRODUCTS
Tenacious bonds and watertight seals above or below waterline Provides exceptionally strong adhesion, yet stays flexible after it cures; may be used above or below the waterline. Ideal for underwater thru-hull fittings, hull-to-deck joints, portholes and bonding wood to fiberglass. Goes on smoothly, wont sag, and remains workable up to four hours. Cures in 57 days with no shrinking. Recommended Usage: Permanent bonding, above and below water. Removal: Mechanical removal .
|
Plastic Restorer from 3M PRODUCTS
Restore clarity and shine to exterior plastic, including polycarbonate, Lexan and acrylic hatches and windows. Use Plastic Restorer to remove hazing and stains. Follow up with Plastic Polish to remove minor imperfections and create a high-gloss shine. 8oz.
|
Non-Skid Deck Cleaner from 3M PRODUCTS
Cleans non-skid surfacesDesigned to clean hard-to-reach ground-in dirt and stains on non-skid surfaces. Safe for use on fiberglass, metal and painted surfaces. One Liter (34oz. ) One liter (34oz.
|
|
|
Sanding Discs - 5" Velcro-Backed, 40-Grit, 5 Pack from 3M PRODUCTS
Convenient hook and loop disk attachmentAdapts a 1/4” or 3/8” electric drill so it may be used as a 5” disc sander. Includes three Velcro-backed sanding discs (120-, 80- and 40-grit). Recommended Usage: Sanding fiberglass/gelcoat, paint, wood and metal. Abrasive Material: Aluminum oxide. Backing Type: Hook and loop . Disc Size: 5" disc .
|
|
6" from 3M PRODUCTS, Green from 3M PRODUCTS, Box from 3M PRODUCTS
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
200
300
400
500
600
700
800
900
1,000
1,150
1,160
1,170
1,180
1,190
1,200
1,210
1,220
1,230
1,231
1,232
1,233
1,234
1,235
1,236
1,237
1,238
1,239
1,240
1,241
1,242
1,243
1,244
1,245
1,246
1,247
1,248
1,249
1,250
1,251
1,252
1,253
1,254
1,255
1,256
1,257
1,258
1,259
1,260
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Scotch® #35 Vinyl Electrical Color-Coding Tapes
Scotch Vinyl Electrical Color-Coding Tape 35 is used in phase identification, color-coding leads and piping systems and for marking safety areas. This tape is abrasion- and weather-resistant, with excellent mechanical and electrical insulation properties that wraps smoothly and holds tight over a wide range of temperatures. UL Listed and CSA Certified, and is flame-retardant.
Part No: 10851
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->WetOrDry™ Finishing Sandpaper
Ideal for wet sanding between coats of varnish, paint and other finishes. Made with silicon carbide, a sharp synthetic mineral that cuts fast and is satin smooth.
Part No: 9087DC-NA
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Hookit Gold 255L Sanding Discs - 3", 5", & 6"
Hookit™ Gold 255L Film Discs, Dust Free 6", 5", and 3" discs Convenient hook and loop attachment system for easy attachment to and removal from the dual action face pad. Tough film backed discs with aluminum oxide offer long life and consistent finish.
Part No: 00977
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Hookit Gold 255L Sanding Discs - 3", 5", & 6"
Hookit™ Gold 255L Film Discs, Dust Free 6", 5", and 3" discs Convenient hook and loop attachment system for easy attachment to and removal from the dual action face pad. Tough film backed discs with aluminum oxide offer long life and consistent finish.
Part No: 00976
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Back Up Pads
Vinyl face pad provides good disc adhesion and easy disc removal. Maximum safe operating speed is 7,000 RPM.
Part No: 05755
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Back Up Pads
Vinyl face pad provides good disc adhesion and easy disc removal. Maximum safe operating speed is 7,000 RPM.
Part No: 05768
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Hookit Imperial Sanding Discs
3M's premier Imperial abrasive discs feature the original Hookit™ attachment system. Convenient hook and loop system maximizes disc life by giving the user the ability to change grits without contaminating disc backing or dual action pad face. "Imperial 6" E-weight backing provides faster, more aggressive cut. Hookit™ 8" Regular No-Hole, E-Weight Paper Backing, 25 Disc Qty. Hookit™ Regular No-Hole E-Weight Paper Backing, 25 Disc Qty.
Part No: 01735
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Hookit Imperial Sanding Discs
3M's premier Imperial abrasive discs feature the original Hookit™ attachment system. Convenient hook and loop system maximizes disc life by giving the user the ability to change grits without contaminating disc backing or dual action pad face. "Imperial 6" E-weight backing provides faster, more aggressive cut. Hookit™ 8" Regular No-Hole, E-Weight Paper Backing, 25 Disc Qty. Hookit™ Regular No-Hole E-Weight Paper Backing, 25 Disc Qty.
Part No: 01773
|
|
|
|
Home -> Engine Systems -> Engine Lubrication -> Oil Absorbents->Petroleum Sorbents
Absorb spilled oil before it pollutesSorbents help contain and control potentially dangerous spills of oil and gasoline, but repel water. They go to work immediately so there's less exposure to you and others and less risk to the environment. For use in "oil only" (hydrophobic) applications. T-156 and HP-156 absorb . 25 gal. per pad. HP-256 absorbs . 50gal. per pad.
Part No: T-156
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->6" Gold Hookit Clean Sanding Disks
The specially designed hole pattern of these disks provides exceptional dust extraction which improves their cutting action when used with a dust extraction system.
Part No: 20757
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes -> Metal Polishes
Restores luster to metalsRemoves rust and corrosion from bronze, copper, aluminum, brass and stainless steel, leaving a bright, attractive finish. Paste. 18oz. 18oz.
Part No: 09019
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Putties, Sealers, Misc->High Strength Blister/Repair Filler - Pint
Two-component vinylester filler. Contains short strand fibers for structural repairs. . Reduces water absorption and osmotic-blister damage. . Benzoyl-peroxide hardener (8oz. ) works well with this filler.
Part No: 46014
|
|
|
|
Home -> Paint & Maintenance -> Caulking & Adhesives -> Caulking Compounds->Fast Cure 5200 Polyurethane Adhesive/Sealant
Cures tack-free in just two hours The same performance as standard 5200, but becomes tack-free in just two hours and cures in 24 hours. White. Formulation: One-part polyurethane adhesive/sealant . Recommended Usage: Permanent bonding, above or below water. Extremely strong & flexible . Material Incompatibilities: Acrylics, Some plastics (ABS, Lexan) . Cure Time: Tack-free: 2 hrs. ; Complete cure: 24 hrs. . Cleanup: Mineral spirits or kerosene .
Part No: 06520
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Masking Tape And Paper->Masking Film, 48IN X 180FT
Use with Hand Masker (Model 251327) for easy deploymentHigh-density, non-porous film for paint masking and paint overspray protection. Pre-folded for use with hand masker. Not recommended for overnight outdoor use. Recommended Usage: Paint masking, paint overspray protection . Material: High-density, non-porous film .
Part No: 06845
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper -> Abrasive Long And Skinny->Green Prod Disc (GFC) - 8", 24E-Grit, 50 Pk
.
Part No: 01552
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->8" Green Corps™ Stikit™ Resin Bond Discs
Grade 24E is designed for rough fairing and heavy bottom paint and gel coat removal. 60E is designed for paint removal and sanding marine fairing compounds and gelcoated fiberglass.
Part No: 01551
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Masking Tape And Paper->Scotch General Painting Masking Tape #2050 - 3/4"
Use in a wide range of painting applicationsGeneral-purpose. Not for critical or extended outdoor use. Recommended Usage: General purpose masking or binding tape; adheres to previously painted or varnished surfaces . Material: Crepe paper with rubber resin adhesive . Removal Time: Three days .
Part No: 05617
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes -> Kits & One Step Product->Cleaner & Wax
One-step processDesigned to remove light-to-medium oxidation, clean, polish and protect fiberglass gel coat and marine topside paints. A unique liquid formulation combines a compound with a special blend of waxes which restore shine and protect in one application.
Part No: 09009
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper
Grades available for stripping paint down to metal, shaping and sanding plastic filler and removal of coarser scratches in body filler and scratch refinement of bare metal.
Part No: 00615
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Hookit Imperial Sanding Discs
3M's premier Imperial abrasive discs feature the original Hookit™ attachment system. Convenient hook and loop system maximizes disc life by giving the user the ability to change grits without contaminating disc backing or dual action pad face. "Imperial 6" E-weight backing provides faster, more aggressive cut. Hookit™ 8" Regular No-Hole, E-Weight Paper Backing, 25 Disc Qty. Hookit™ Regular No-Hole E-Weight Paper Backing, 25 Disc Qty.
Part No: 01815
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape->Mask
8210 Plus Particulate Respirators 10 Pack Unique electret charged microfiber filtration technology keeps out dust and particles .
Part No: 91757PR
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->80 Grit - Single
Specially coated to resist clogging, this tough sandpaper stays significantly sharper longer-sanding faster than comparable grit. Suitable for dry sanding most surfaces including paint, wood, metal, plastic and fiberglass. Excellent for between-coats finishing applications. Will not discolor what you sand. Assortment contains one sheet each of 60, 100, and 180 grits. Abrasive Material: Aluminum oxide . Recommended Usage: General purpose dry sanding on fiberglass, wood, metal, plastic .
Part No: 88614NA
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->6" Gold Hookit Clean Sanding Disks
The specially designed hole pattern of these disks provides exceptional dust extraction which improves their cutting action when used with a dust extraction system.
Part No: 20756
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Heat Shrink Electrical Connectors
One-piece, burr-free and covered with heat shrink tube that shrinks to 1/2 original diameter. Moisture-resistant, heat-activated sealant.
Part No: 03781NA
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Hookit Gold 255L Sanding Discs - 3", 5", & 6"
Hookit™ Gold 255L Film Discs, Dust Free 6", 5", and 3" discs Convenient hook and loop attachment system for easy attachment to and removal from the dual action face pad. Tough film backed discs with aluminum oxide offer long life and consistent finish.
Part No: 00999
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape
Stylish safety glasses that help provide comfortable eye protection with clear lens.
Part No: R1700ES
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape->Scotch Performance Masking Tape #233+
Use in place of original #233 for paint stripingAn improved version of the high-quality 233 tape that offers exceptional conformability to hug curves and contours, as well as a sharper edge for paint striping. Recommended Usage: Paint masking, bottom painting, brightwork finishing & coating . Material: Crepe paper with rubber resin adhesive . Removal Time: 24 hrs .
Part No: 46338
|
|
|
|
Home -> Paint & Maintenance -> Caulking & Adhesives -> Caulking Compounds
Adhesive/sealant for a wide variety of materialsOne-part polysulfide product seals joints between similar and dissimilar surfaces wood, fiberglass, metal and glass above and below the waterline. Non-sagging, non-shrinking and permanently flexible. Excellent resistance to weathering. White. Recommended Usage: Seals mechanically fastened joints, above or below water; fiberglass, wood, metal, most plastics. Cure Time: Tack free: 5 hrs; complete cure in 14-21 days; remains permanently flexible.
Part No: 06510
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Gold Disc (FB) - 6", P500-Grit, 75 Pk
3M™ 255L Gold Film Discs are designed for use on marine paints, gel coat and primer systems that are tougher to sand. 3M™ 260L Gold Film Discs are designed for machine sanding in finer grades prior to compounding.
Part No: 01322
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper -> Sandpaper Discs->Gold Disc (FB) - 6", P500-Grit, 75 Pk
3M™ 255L Gold Film Discs are designed for use on marine paints, gel coat and primer systems that are tougher to sand. 3M™ 260L Gold Film Discs are designed for machine sanding in finer grades prior to compounding.
Part No: 01331
|
|
|