Welcome! Please Sign-In
Top Sellers
Flush Lock and Latch from PERKO
Flush Lock and Latch from PERKO
Black plastic, with stainless steel "D" ring handle, stem and lock nut. Two O-rings for increased water resistance. Position indicator shows open or closed position. Lock with 2 keys. Door thickness: 3/8" to 1-1/4" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 1-1/16" to 2-9/16" .
4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
Zinc Grouper Anode from CANADA METALS
Zinc Grouper Anode from CANADA METALS
Supplements your boat's existing anodes An excellent anodic device to supplement a vessel’s existing anode system, especially to counteract stray current from defective shore power. Clip to bolt on outdrive. Clip to grounding strap if possible or wire items together with copper wire and clip to wire. Do not connect to negative battery terminals. Dimensions: 8 1/4"L x 3 1/4"W x 1 3/8"D.
Trim Tab Zinc Anode from CANADA METALS
Trim Tab Zinc Anode from CANADA METALS
Attaches to standard Bennett trim tabs where actuator bolts to plate.
Aluminum Anode Kit Bravo II & III from CANADA METALS
Aluminum Anode Kit Bravo II & III from CANADA METALS
Offered in aluminum, for use in salt or brackish water, or magnesium, for freshwater only.
V. 1-7/8"L x 5/8"W Eye Strap, 1/2" Fairlead Width, 1-3/8" Hole Centers, Two #10 RHMS Fasteners from RONSTAN
V. 1-7/8"L x 5/8"W Eye Strap, 1/2" Fairlead Width, 1-3/8" Hole Centers, Two #10 RHMS Fasteners from RONSTAN
Eye straps are convenient for lashing points and attaching control line leads or blocks.
Aft-Deck Shower System from ATTWOOD
Aft-Deck Shower System from ATTWOOD
This compact hot/cold shower stores neatly in its own compartment on the stern or in the head. Includes a handheld shower spray head with shutoff, 6' hose, hot/cold water controls and a cover. Easily hooked into your freshwater system. Compartment is drilled for six #8 fasteners. Material: High-impact plastic . Dimensions: 9-1/2"H x 5"W x 2-1/4"D . Hose Size: 6'L . Port Sizes: 1/2" NPT .
10 Micron Diesel Fuel Filter/Water Separator with Metal Bowl from RACOR-PARKER FILTRAT
10 Micron Diesel Fuel Filter/Water Separator with Metal Bowl from RACOR-PARKER FILTRAT
Racor’s Aquabloc filter media removes virtually 100% of water and solid contaminants. Filters have die-cast aluminum heads and come in different sizes for diesel engines and any rate of fuel flow. To be used on the suction side of the pump. See-thru bowls allow visual inspection for water; metal bowls are recommended for use in areas of high heat and are required by the US Coast Guard on inboard engines and gensets. Inlets/Outlets: 1/4" NPT female . Bowl Material: See-thru polymer .
Boeshield T-9 Spray Lube from BOESHIELD
Boeshield T-9 Spray Lube from BOESHIELD
Penetrates, lubricates and protects This combination of solvents, lubricants and waxes was designed to penetrate, lubricate and protect surfaces, and to displace moisture. It dries to a thin, waxy, corrosion-preventing film that clings to metal for months. It will loosen rusty and corroded parts and is safe on paints, plastics and vinyls. Aerosol spray gets into cracks and crevices. 12oz.
Power Bubbles 12V DC Aerator from MARINE METALS
Power Bubbles 12V DC Aerator from MARINE METALS
This system runs on low current as it's dual bellows aerate up to 2L per minute of air. It saturates circulating water with oxygen. Double discharge allows aeration of one or two livewells. Increases flow capacity. Includes 10' of air tubing. Two large airstones allow the pump to be mounted in any protected area. Suitable for fresh or saltwater. Two anti-siphon valves protect pump against water intrusion. Quietly operates with solid-state circuits. Draw: 1/4A at 12V DC.
Lube Tube Adapter for Yamaha, Nissan, Tohatsu, Honda (2-50hp) from WEST MARINE
Lube Tube Adapter for Yamaha, Nissan, Tohatsu, Honda (2-50hp) from WEST MARINE
Marine lower unit drain, flush and fill tool. Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefishier lower units. Quick, easy and clean way to change marine lower unit gear lube. For use with all 8- and 10-oz.
Rounded Oval, 8-1/2"W x 11-1/4"L x 5-1/4"D, 1" Flange, 1-1/2" Drain from AMBASSADOR MARINE
Rounded Oval, 8-1/2"W x 11-1/4"L x 5-1/4"D, 1" Flange, 1-1/2" Drain from AMBASSADOR MARINE
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.
Spring Loaded Ring Pull, Square 2 x 2 3/8" from WEST MARINE
Spring Loaded Ring Pull, Square 2 x 2 3/8" from WEST MARINE
Spring-loaded ring immediately returns to flush when released. Type 304 stainless steel . Size: 2 x 2 3/8" .
Crack Cure Sealant, 2 OZ. from CAPTAIN TOLLEY S
Crack Cure Sealant, 2 OZ. from CAPTAIN TOLLEY S
Excellent for sealing hairline cracks in gelcoatThis penetrating copolymer sealant is formulated to be so thin that by using capillary action it can find its way inside fine cracks and set to a clear, flexible seal. Use on wood, rubber, glass, metals, fiberglass, Lexan, ceramic and concrete. Formulation: One-part water-based acrylic polymer sealant. Recommended Usage: Fixing leaks in wood, rubber, glass, metal, ceramics, and other materials . until saturated. Color: Milky . Quantity: 2oz.
Sanding Discs - 5" Velcro-Backed, 40-Grit, 5 Pack from 3M PRODUCTS
Sanding Discs - 5" Velcro-Backed, 40-Grit, 5 Pack from 3M PRODUCTS
Convenient hook and loop disk attachmentAdapts a 1/4” or 3/8” electric drill so it may be used as a 5” disc sander. Includes three Velcro-backed sanding discs (120-, 80- and 40-grit). Recommended Usage: Sanding fiberglass/gelcoat, paint, wood and metal. Abrasive Material: Aluminum oxide. Backing Type: Hook and loop . Disc Size: 5" disc .

000 from CANADA METALS, 2"L from CANADA METALS, 8"L from CANADA METALS

Outdrive Anode, Magnesium, MerCruiser, CM806190M from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes->Outdrive Anodes, MerCruiser
Sold in pairs or, where indicated, in kits which include hardware.
Part No: CM806190M
Complete Engine Anode - 3/8" x 2" from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes -> Hull/Rudder/Engine Anodes->Complete & Spare Pencil Engine Anodes
Complete brass plug with anode and replacement pencil anodes. Threads measured by NPT standards.
Part No: CME1H
Zinc Hull Anode - 8"L x 4"W x 3/4" thickness from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes -> Hull/Rudder/Engine Anodes->Hull Anodes
Hull Anodes Rigorously tested to ensure consistency and quality.
Part No: CMZHC5AZ
#3543 Cordero Channel, 80,000 from CANADA METALS Home -> Navigation -> Charts & Chart Catalogs -> Canada->Pacific Coast of Canada Charts
Nautical charts show hazards, aids to navigation, features along the shoreline and the seafloor, as well as man-made and natural features of the area. Large-scale insets of the most frequented small craft havens Photographs of the approaches to harbors and channels Important geographic reference points Each chart also contains a narrative with descriptions of navigation aids and dangers, tide and current characteristics, and information on supplies and facilities at anchorages.
Part No: 3543
Outboard Anode, Yamaha, Zinc, CM6884537102Z from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes->Outboard Anodes, Yamaha
Outboard Anodes - Yamaha Manufacturer: Canada Metals.
Part No: CM6884537102Z
Replacement Pencil for 3/4" x 3 5/8" Engine Anode from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes -> Hull/Rudder/Engine Anodes->Complete & Spare Pencil Engine Anodes
Complete brass plug with anode and replacement pencil anodes. Threads measured by NPT standards.
Part No: CMEZ5
#3443 Thetis Island to/à Nanaimo, 40,000 from CANADA METALS Home -> Navigation -> Charts & Chart Catalogs -> Canada->Pacific Coast of Canada Charts
Nautical charts show hazards, aids to navigation, features along the shoreline and the seafloor, as well as man-made and natural features of the area. Large-scale insets of the most frequented small craft havens Photographs of the approaches to harbors and channels Important geographic reference points Each chart also contains a narrative with descriptions of navigation aids and dangers, tide and current characteristics, and information on supplies and facilities at anchorages.
Part No: 3443
Outdrive Anode, Zinc, MerCruiser, CM806189 from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes->Outdrive Anodes, MerCruiser
Sold in pairs or, where indicated, in kits which include hardware.
Part No: CM806189Z
Streamlined Collar Anode - 1 1/4"shaft x 2 3/4"dia. x 2 1/2"L from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes->Zinc Streamlined Collar Anodes
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.
Part No: CMX05
#3463 Strait of Georgia, Southern Portion/Partie Sud, 80,000 from CANADA METALS Home -> Navigation -> Charts & Chart Catalogs -> Canada->Pacific Coast of Canada Charts
Nautical charts show hazards, aids to navigation, features along the shoreline and the seafloor, as well as man-made and natural features of the area. Large-scale insets of the most frequented small craft havens Photographs of the approaches to harbors and channels Important geographic reference points Each chart also contains a narrative with descriptions of navigation aids and dangers, tide and current characteristics, and information on supplies and facilities at anchorages.
Part No: 3463
LC Collar Anode - 1" slot x 2 1/8" dia. x 2 1/8" L from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes -> Shaft/Prop Nut Anodes->Limited Clearance (LC) Collar Anodes
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.
Part No: CMX03S
Streamlined Collar Anode - 1 1/4" Slot x 2 3/4"dia. x 2 1/2"L from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes -> Shaft/Prop Nut Anodes->Zinc Streamlined Collar Anodes
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.
Part No: CMX05S
Outboard Anodes - Mercury/Force/Mariner from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes
Outboard Anodes - Mercury/Force/Mariner.
Outdrive AnodeKit, Magnesium, MerCruiser, CM806105KITM from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes->Outdrive Anodes, MerCruiser
Sold in pairs or, where indicated, in kits which include hardware.
Part No: CM806105KITM
Anode Kit, Aluminum, MerCruiser Stern Drive, CM55989KITA from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes->Aluminum Anodes for MerCruiser Stern Drive
Aluminum Anodes for MerCruiser Stern Drive Where indicated, sold as a kit.
Part No: CM55989KITA
#3604 Nootka Sound to/à Quatsino Sound, 150,000 from CANADA METALS Home -> Navigation -> Charts & Chart Catalogs -> Canada->Pacific Coast of Canada Charts
Nautical charts show hazards, aids to navigation, features along the shoreline and the seafloor, as well as man-made and natural features of the area. Large-scale insets of the most frequented small craft havens Photographs of the approaches to harbors and channels Important geographic reference points Each chart also contains a narrative with descriptions of navigation aids and dangers, tide and current characteristics, and information on supplies and facilities at anchorages.
Part No: C-3604
Zinc Hull Anode - 12"L x 6"W x 1 1/4" thickness from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes->Hull Anodes
Hull Anodes Rigorously tested to ensure consistency and quality.
Part No: CMZ01BSZ
Outboard Anode, Yamaha, Zinc, CM6644537101Z from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes->Outboard Anodes, Yamaha
Outboard Anodes - Yamaha Manufacturer: Canada Metals.
Part No: CM6644537101Z
LC Collar Anode - 3/4"shaft x 2 1/8"dia. x 1"L from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes -> Shaft/Prop Nut Anodes->Limited Clearance (LC) Collar Anodes
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.
Part No: CMC01
Aluminum Anode Kit Alpha I from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes->Alpha I, Bravo I, Bravo II/III Outdrive & Verado Outboard Aluminum & Magnesium Anode Kits
Offered in aluminum, for use in salt or brackish water, or magnesium, for freshwater only.
Part No: CMALPHAKITA
Streamlined Collar Anode - 2 1/4" Slot x 4 1/4"dia. x 3 3/4"L from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes -> Shaft/Prop Nut Anodes->Zinc Streamlined Collar Anodes
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.
Part No: CMX10S
LC Collar Anode - Limited 1" slot x 2 1/2" dia. x 1 1/4" L from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes->Limited Clearance (LC) Collar Anodes
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.
Part No: CMC03S
LC Collar Anode - 3/4" slot x 2 1/8" dia. x 2 1/8" L from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes -> Shaft/Prop Nut Anodes->Limited Clearance (LC) Collar Anodes
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.
Part No: CMX01S
Anode, Aluminum, MerCruiser Stern Drive, CM762144A from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes->Aluminum Anodes for MerCruiser Stern Drive
Aluminum Anodes for MerCruiser Stern Drive Where indicated, sold as a kit.
Part No: CM762144A
Anode Kit, Aluminum, MerCruiser Stern Drive, CM821631KITA from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes->Aluminum Anodes for MerCruiser Stern Drive
Aluminum Anodes for MerCruiser Stern Drive Where indicated, sold as a kit.
Part No: CM821631KITA
MERC ALPHA KIT IN MAG from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes->Alpha I, Bravo I, Bravo II/III Outdrive & Verado Outboard Aluminum & Magnesium Anode Kits
Offered in aluminum, for use in salt or brackish water, or magnesium, for freshwater only.
Part No: CMALPHAKITM
Streamlined Collar Anode - 35MM from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes -> Shaft/Prop Nut Anodes->Zinc Streamlined Collar Anodes
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.
Part No: CMX35
CMDIVERMINI - 1/2" x 4" x 6" from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes -> Hull/Rudder/Engine Anodes->Hull Anodes
Hull Anodes Rigorously tested to ensure consistency and quality.
Part No: CMDIVERMINIM
Outboard Anode, Zinc, CM327606Z from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes->Outboard Anodes, OMC/Johnson/Evinrude
Outboard Anodes - OMC/Johnson/Evinrude Manufacturer: Canada Metals.
Part No: CM327606Z
Streamlined Collar Anode - 3"shaft x 4 3/4"dia. x 3 5/8"L from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes -> Shaft/Prop Nut Anodes->Zinc Streamlined Collar Anodes
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.
Part No: CMX13
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics12