Trim Tab Zinc Anode from CANADA METALS
Attaches to standard Bennett trim tabs where actuator bolts to plate.

Aluminum Anode Kit Bravo II & III from CANADA METALS
Offered in aluminum, for use in salt or brackish water, or magnesium, for freshwater only.

Zinc Anode Kit Bravo I, 1988-Present from CANADA METALS
Offered in aluminum, for use in salt or brackish water, or magnesium, for freshwater only.

CM6G54525101-Yamaha Anode Handle Bar, Magnesium from CANADA METALS
Specially formulated to be highly active in today's fresh water environments and will provide dependable protection for all your underwater gear.

Yellow Medium C-Cleat from RONSTAN
Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self-lubricating, self-cleaning slotted bearings are impregnated with Teflon®, provide lower frictional resistance and quicker response than ball bearings, which deform under load. Rope Guides: This fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat.

Barbed Hose Reducer, 3/4" to 1-1/8" from MIDLAND METAL
Plastic Hose Reducers, Barbed.

10 Micron Diesel Fuel Filter/Water Separator with Metal Bowl from RACOR-PARKER FILTRAT
Racor’s Aquabloc filter media removes virtually 100% of water and solid contaminants. Filters have die-cast aluminum heads and come in different sizes for diesel engines and any rate of fuel flow. To be used on the suction side of the pump. See-thru bowls allow visual inspection for water; metal bowls are recommended for use in areas of high heat and are required by the US Coast Guard on inboard engines and gensets. Inlets/Outlets: 1/4" NPT female . Bowl Material: See-thru polymer .

Barbed Hose Reducer, 1-1/4" to 1-1/2" from MIDLAND METAL
Plastic Hose Reducers, Barbed.

5/8" Barbed Elbow from MIDLAND METAL
Nylon Hose Elbows, Barbed.

Boeshield T-9 Spray Lube from BOESHIELD
Penetrates, lubricates and protects This combination of solvents, lubricants and waxes was designed to penetrate, lubricate and protect surfaces, and to displace moisture. It dries to a thin, waxy, corrosion-preventing film that clings to metal for months. It will loosen rusty and corroded parts and is safe on paints, plastics and vinyls. Aerosol spray gets into cracks and crevices. 12oz.

Power Bubbles 12V DC Aerator from MARINE METALS
This system runs on low current as it's dual bellows aerate up to 2L per minute of air. It saturates circulating water with oxygen. Double discharge allows aeration of one or two livewells. Increases flow capacity. Includes 10' of air tubing. Two large airstones allow the pump to be mounted in any protected area. Suitable for fresh or saltwater. Two anti-siphon valves protect pump against water intrusion. Quietly operates with solid-state circuits. Draw: 1/4A at 12V DC.

Sanding Discs - 5" Velcro-Backed, 40-Grit, 5 Pack from 3M PRODUCTS
Convenient hook and loop disk attachmentAdapts a 1/4” or 3/8” electric drill so it may be used as a 5” disc sander. Includes three Velcro-backed sanding discs (120-, 80- and 40-grit). Recommended Usage: Sanding fiberglass/gelcoat, paint, wood and metal. Abrasive Material: Aluminum oxide. Backing Type: Hook and loop . Disc Size: 5" disc .

1/4" NPT X 3/8" Brass hose barb from MOELLER
1/4 NPT X 3/8" Brass Hose barbs with male threads.

OEM Replacement Fuel Tanks from MOELLER
The OEM’s (Original Equipment Manufacturer’s) choice in lightweight, non-corroding portable fuel tanks! Includes a universal 1/4" NPT fuel pickup adapter and fulfills all your large and small outboard engine needs. Approved for use in Japan, Australia and New Zealand, Canada, ISO and CSA Certified, UL Listed. 21. 25"L x 14"W x 9.

Lube Tube Adapter for Yamaha, Nissan, Tohatsu, Honda (2-50hp) from WEST MARINE
Marine lower unit drain, flush and fill tool. Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefishier lower units. Quick, easy and clean way to change marine lower unit gear lube. For use with all 8- and 10-oz.