Welcome! Please Sign-In
Top Sellers
2-5/8" x 1-1/2" Euro Utility Hinge from WEST MARINE
2-5/8" x 1-1/2" Euro Utility Hinge from WEST MARINE
Stamped utility hinge with 1/2" offset from TACO. Made of marine grade 304 stainless steel with polished finish, non-corrosive utility hinge is ideal for hatches, cabinets, and doors inside and outside the boat. Measures 2-5/8" x 1-1/2" x .
Ring Style Car RC-125 from FORESPAR
Ring Style Car RC-125 from FORESPAR
Separates the up/down and side-to-side motions of the pole to make a bind-free, strong attachment. Shackles are supplied for uphaul/downhaul lines. Stainless steel cheeks, aluminum body and plastic liners. Ring Style Car RC-125 Although a screw-pin stop is supplied, this car is designed to be used with uphaul/downhaul blocks shackled to the bails at each end. Ring ID: 1 5/8". Investment cast stainless steel with plastic liners to reduce friction. Fits UXP and UTR pole end fittings.
5/16" Wire Rope Clamp from SEADOG
5/16" Wire Rope Clamp from SEADOG
Investment Cast 316 Stainless Body / AISI 304 Stainless U-Bolt. Accepts 5/16" wire. 1-5/8" Long. 1-3/8" wide.
Clamp-On Rod Holder - 1 1/4"ID Horizontal, Gold from WEST MARINE
Clamp-On Rod Holder - 1 1/4"ID Horizontal, Gold from WEST MARINE
Silver or gold tubes are anodized for long life in the marine environment. Fabricated from cold drawn aluminum with no unsightly weld seams. Available in aluminum schedule pipe sizes 3/4" thru 1 1/4" in horizontal and vertical models. If using stainless steel tube, please go down 1/4" in size. Type:Clamp on. # of Rods:One. Material:Aluminum. Lining:White vinyl. Diameter:Rod holder is 1 5/8" ID. Mount:Clamp on.
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
1-7/8" Brass Standard Hasp from ABI
1-7/8" Brass Standard Hasp from ABI
Highly polished brass . Fixed eye (does not swivel). 1"w x 1-7/8"L. Padlock hole diameter 5/16" .
T-Ball Swage Fitting, 1/8" Wire Size from ALEXANDER-ROBERTS
T-Ball Swage Fitting, 1/8" Wire Size from ALEXANDER-ROBERTS
Electropolished 316 stainless steel. Running Back style has a stainless bail rather than a swage end, to accept Dyneema or other rope for a running backstay. *Running Back style has a stainless bail rather than a swage end to accept Spectra or other rope for a running backstay. Style: Swage . Material: Electropolished Type 316 stainless steel . Configuration: T-ball swage .
Toggle Assembly with 5/8" Clevis Pin from HARKEN
Toggle Assembly with 5/8" Clevis Pin from HARKEN
9 mm) clevis pin (MKIV Unit 2 Furler).
Flex Trim - Black 1/2" opening from TACO PRODUCTS
Flex Trim - Black 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
Deck Fill, Gas, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Deck Fill, Gas, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
Brass Reducer, 1/4"NPT x 1/8" FNPT from MOELLER
Brass Reducer, 1/4"NPT x 1/8" FNPT from MOELLER
Barb-Fuel 1/4Fnp x 1/8Mnpt Brs|Barb-Fuel 1/4Fnp x 1/8Mnpt Brs.
Teak Plugs - 3/8" from SEAFIT
Teak Plugs - 3/8" from SEAFIT
Use these teak plugs to cover screw heads or fill small holes for a beautiful smooth finish to your installation. Sizes: 1/4" 5/8" 5/16" 3/8" 1/2" 1".
Hatch - Ocean 60 Flat Base from LEWMAR
Hatch - Ocean 60 Flat Base from LEWMAR
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".
Vertical Hand Pump Faucet, Chrome Over Brass from FYNSPRAY
Vertical Hand Pump Faucet, Chrome Over Brass from FYNSPRAY
Fynspray Vertical Hand Pump Faucet Vertical plunger pump with a gracefully arched spout. 50 strokes per gallon. Chrome over brass. 1"diameter tube . Fits 1/2"–5/8" hose .

1, 1-1, from ALEXANDER-ROBERTS, 1-5, 8" Pin-to-Pin from ALEXANDER-ROBERTS

Double Jaw Toggle, 5/32" Wire Size, 5/16" Pin dia., 1-1/4" Pin-to-Pin from ALEXANDER-ROBERTS Home -> Cordage -> Rigging Products->Stainless-Steel Double Jaw Toggles
Stainless-Steel Double Jaw Toggles.
Part No: DJT 10
Swage Eye with Toggle, 5-3/4" Wire Size, 5/16" Pin Dia. from ALEXANDER-ROBERTS Home -> Cordage -> Rigging Products->Swage Eyes with Toggle
Type 304 stainless toggles.
Part No: SET 5
5/32" Wire Size, 1/4" Pin dia., 7-1/4" Min. Length, 10-3/8" Max Length, 3400lb. Breaking Strength from ALEXANDER-ROBERTS Home -> Sailboat -> Rigging Products->Turnbuckle, Toggle/Swage
Lengths are measured from bottom of swage hole to pin center.
Part No: TS050808
T-Ball Swage Fitting, 1/4" Wire Size from ALEXANDER-ROBERTS Home -> Sailboat -> Rigging Products->T-Ball Swage Fittings
Electropolished 316 stainless steel. Running Back style has a stainless bail rather than a swage end, to accept Dyneema or other rope for a running backstay. *Running Back style has a stainless bail rather than a swage end to accept Spectra or other rope for a running backstay. Style: Swage . Material: Electropolished Type 316 stainless steel . Configuration: T-ball swage .
Part No: TSW8
Chrome Eye Jaw Toggle, 3/8" Pin dia., 1-5/8" Pin-to-Pin from ALEXANDER-ROBERTS Home -> Sailboat -> Rigging Products -> Rigging Terminals->Eye Jaw Toggles
Bronze or Chrome Eye Jaw Toggles.
Part No: FT12 CHR
Gate Eye Stud, 1/8" Wire Size, 1/4" Thread from ALEXANDER-ROBERTS Home -> Cordage -> Rigging Products -> Rigging Terminals->Gate Eye Studs
316 stainless steel.
Part No: GES 0408
Bronze Eye Jaw Toggle, 3/8" Pin dia., 1-5/8" Pin-to-Pin from ALEXANDER-ROBERTS Home -> Sailboat -> Rigging Products -> Rigging Terminals->Eye Jaw Toggles
Bronze or Chrome Eye Jaw Toggles.
Part No: FT 12 BRZ
5/32" Wire Size, 5/16" Pin dia., 8" Min. Length, 11-1/4" Max Length, 4900lb. Breaking Strength from ALEXANDER-ROBERTS Home -> Sailboat -> Rigging Products->Turnbuckle, Toggle/Swage
Lengths are measured from bottom of swage hole to pin center.
Part No: TS051010
Swage Eye with Toggle, 9/32" Wire Size, 1/2" Pin Dia. from ALEXANDER-ROBERTS Home -> Cordage -> Rigging Products->Swage Eyes with Toggle
Type 304 stainless toggles.
Part No: SET 9
Swage, 1/4IN Sailmaker Eye from ALEXANDER-ROBERTS Home -> Sailboat -> Rigging Products->Sailmaker Swage Eyes
Principally used for headstay swage eye for jib furling. Type 316 Stainless steel.
Part No: SE8E
T-Ball Swage Fitting, 3/16" Wire Size, Running Back* from ALEXANDER-ROBERTS Home -> Sailboat -> Rigging Products->T-Ball Swage Fittings
Electropolished 316 stainless steel. Running Back style has a stainless bail rather than a swage end, to accept Dyneema or other rope for a running backstay. *Running Back style has a stainless bail rather than a swage end to accept Spectra or other rope for a running backstay. Style: Swage . Material: Electropolished Type 316 stainless steel . Configuration: T-ball swage .
Part No: TRB-6
Double Jaw Toggle, 3/8" Wire Size, 5/8" Pin dia., 21-3/4" Pin-to-Pin from ALEXANDER-ROBERTS Home -> Cordage -> Rigging Products->Stainless-Steel Double Jaw Toggles
Stainless-Steel Double Jaw Toggles.
Part No: DJT 20-12
T-Ball Swage Fitting, 9/32" Wire Size from ALEXANDER-ROBERTS Home -> Sailboat -> Rigging Products->T-Ball Swage Fittings
Electropolished 316 stainless steel. Running Back style has a stainless bail rather than a swage end, to accept Dyneema or other rope for a running backstay. *Running Back style has a stainless bail rather than a swage end to accept Spectra or other rope for a running backstay. Style: Swage . Material: Electropolished Type 316 stainless steel . Configuration: T-ball swage .
Part No: TSW9
1/4" Wire Size, 1/2" Pin dia., 10-1/8" Min. Length, 14-1/2" Max Length, 15,000lb. Breaking Strength from ALEXANDER-ROBERTS Home -> Sailboat -> Rigging Products->Turnbuckle, Toggle/Swage
Lengths are measured from bottom of swage hole to pin center.
Part No: WM TS081616
Chrome Eye Jaw Toggle, 1/2" Pin dia., 2-1/16" Pin-to-Pin from ALEXANDER-ROBERTS Home -> Sailboat -> Rigging Products -> Rigging Terminals->Eye Jaw Toggles
Bronze or Chrome Eye Jaw Toggles.
Part No: WM FT16 CHROME
Chrome Eye Jaw Toggle, 5/8" Pin dia., 2-11/16" Pin-to-Pin from ALEXANDER-ROBERTS Home -> Sailboat -> Rigging Products -> Rigging Terminals->Eye Jaw Toggles
Bronze or Chrome Eye Jaw Toggles.
Part No: WM FT20 CHROME
9/32" Wire Size, 1/2" Pin dia., 10-3/16" Min. Length, 14-9/16" Max Length, 15,000lb. Breaking Strength from ALEXANDER-ROBERTS Home -> Sailboat -> Rigging Products->Turnbuckle, Toggle/Swage
Lengths are measured from bottom of swage hole to pin center.
Part No: WM TS 091616
Turnbuckle, Toggle/Swage from ALEXANDER-ROBERTS Home -> Sailboat -> Rigging Products
Lengths are measured from bottom of swage hole to pin center.
Lifting Magnet from ALLIED INTERNATIONAL Home -> Paint & Maintenance -> Tools
Why hire a diver when you can use this? Just the thing for butter-fingered boaters. Lifts over 200lb. of ferrous metals. PVC-coated to resist chips and corrosion. 4" x 3 3/4" x 3 1/4". Up to 200 lbs.
Part No: 39908
SAE Folding Hex Key Set from ALLIED INTERNATIONAL Home -> Paint & Maintenance -> Tools -> Hand Tools->Folding Hex Key & Driver Sets
Manufactured to stringent ANSI standards, these Folding Hex Key and Driver Sets feature comfortable, non-slip, nubbed-rubber handles for a secure grip. Lifetime warranty. SAE has sizes: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4". Metric has sizes: 1. 5mm, 2mm, 2. 5mm, 3mm, 4mm, 5mm, 6mm, 8mm.
Part No: 85332
Metric Folding Hex Key Set from ALLIED INTERNATIONAL Home -> Paint & Maintenance -> Tools -> Hand Tools->Folding Hex Key & Driver Sets
Manufactured to stringent ANSI standards, these Folding Hex Key and Driver Sets feature comfortable, non-slip, nubbed-rubber handles for a secure grip. Lifetime warranty. SAE has sizes: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4". Metric has sizes: 1. 5mm, 2mm, 2. 5mm, 3mm, 4mm, 5mm, 6mm, 8mm.
Part No: 85331
Folding Slotted/Phillips Set from ALLIED INTERNATIONAL Home -> Paint & Maintenance -> Tools -> Hand Tools->Folding Hex Key & Driver Sets
Manufactured to stringent ANSI standards, these Folding Hex Key and Driver Sets feature comfortable, non-slip, nubbed-rubber handles for a secure grip. Lifetime warranty. SAE has sizes: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4". Metric has sizes: 1. 5mm, 2mm, 2. 5mm, 3mm, 4mm, 5mm, 6mm, 8mm.
Part No: 55072
7 Piece Tune-Up Kit from ALLIED INTERNATIONAL Home -> Engine Systems -> Engine Parts
Includes 13/16" and 5/8" spark plug sockets, 3/8 x 6" extension bar, universal joint, spark plug gauge, 3/8" ratcheting driver and wire brush.
Part No: 89093
Mechanic’s 123 Piece Tool Set from ALLIED INTERNATIONAL Home -> Paint & Maintenance -> Tools -> Tool Kits
Set includes 6" cushion-grip, long-nose pliers, ten nut driver bits (SAE and metric), magnetic bit driver, wire brush, ten combination wrenches (SAE and metric), fourteen 3/8" drive sockets (SAE and metric), twenty 1/4" drive sockets (SAE and metric), 3/8" drive ratchet, 3/8 drive extension, eight SAE hex keys with holders (1/16"–1/4"), eight metric hex keys with holders (1.
Part No: 49051CB
55-Piece SAE Tool Set from ALLIED INTERNATIONAL Home -> Paint & Maintenance -> Tools -> Tool Kits
Pieces include 3/8" drive reversible ratchet, 3/8"-1/4" adapter, 3/8" and 1/4" drive sockets (14pcs. ), 3" extension, 8 hex keys with holder, Phillips, Pozi, Torx®, slotted driver bits with hex adaptors and holders (total of 22pcs. ), 3/8", 7/16", 1/2", 9/16" combination wrenches, 6" long nose pliers, bit driver and case.
Part No: 49026
SAE Folding Torx Key Set from ALLIED INTERNATIONAL Home -> Paint & Maintenance -> Tools -> Hand Tools->Folding Hex Key & Driver Sets
Manufactured to stringent ANSI standards, these Folding Hex Key and Driver Sets feature comfortable, non-slip, nubbed-rubber handles for a secure grip. Lifetime warranty. SAE has sizes: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4". Metric has sizes: 1. 5mm, 2mm, 2. 5mm, 3mm, 4mm, 5mm, 6mm, 8mm.
Part No: 55070
Golden Teak Oil - Quart from AMAZON Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Oils & Sealers
Penetrates deep for long-lasting protectionA blend of fine oils that seals the wood and gives it a warm, golden hue. Long-lasting protection. Easy application. Nonflammable. Biodegradable. Quart. Penetrates deeply into the grain. Locks out moisture, dirt and grime.
Part No: GTO-150
Oval, 9-1/2"W x 14"L x 5-1/4"D, 3/4" Flange, 2-1/16" Drain from AMBASSADOR MARINE Home -> Plumbing -> Freshwater Systems->Stainless Steel Sinks and Basins
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.
Part No: S64-1515-UM-D
Rectangular, 11-3/4"W x 12-1/2"L x 8-1/8"D, 3/4" Flange, 2-1/16" Drain from AMBASSADOR MARINE Home -> Plumbing -> Freshwater Systems->Stainless Steel Sinks and Basins
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.
Part No: S44-1831-UM-D
Half Sphere, 10-1/4"dia. x 4-3/4"D, 5/8" Flange, 2-1/16" Drain from AMBASSADOR MARINE Home -> Plumbing -> Freshwater Systems->Stainless Steel Sinks and Basins
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.
Part No: S24-1400-UM-D
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics11