Top Sellers
Contura Rocker Switch, SPDT On/Off/On from COLE HERSEE
Waterproof switches are rated to IP66 for use on ship decks and with an LED light to indicate when the circuit is on. Several configurations are available for almost any application. Recommended for replacements in waterproof electrical panels with rocker switches to ensure waterproof integrity. Includes both black and gray covers. Both switches and covers are interchangeable with similar switches used as original equipment on many common boat types. Mounting Hole Size: 1. 450" x 0.
|
Fuse Block, 10 Circuit, 3.75"L x 3.4"W x 0.8"H from COLE HERSEE
Recessed fuse contacts, no cover required. Black thermoplastic.
|
SPST Switch, ON/OFF Positions, No Pilot Light, 2 Screw Terminals from COLE HERSEE
These rocker switches come in several different configurations for panel mounting. Available in illuminated and non-illuminated models, they feature non-glare black matte plastic housings, bezel and actuator, brass screw or blade terminals, and gasket-sealed housings. Snap-in mounting in panels from 0. 093" (2. 36mm) to 0. 187" (4.
|
Dual Warning Light and Buzzer from COLE HERSEE
Works with oil pressure, temperature, halon extinguishers, etc Use with grounded or ungrounded switches For use with Marine Engine Warning Alarm Kit Steel case measures 1-7/8"D x 1"W x 1-11/32"H Fits panels to 13/64" thick 12V DC .
|
1-7/8" Brass Standard Hasp from ABI
Highly polished brass . Fixed eye (does not swivel). 1"w x 1-7/8"L. Padlock hole diameter 5/16" .
|
1/4" NPT X 3/8" Brass hose barb from MOELLER
1/4 NPT X 3/8" Brass Hose barbs with male threads.
|
3/8" NPT Aluminum hose barb from MOELLER
3/8 NPT X 3/8" Aluminum hose barb with male threads.
|
Spring Loaded Ring Pull, Square 2 x 2 3/8" from WEST MARINE
Spring-loaded ring immediately returns to flush when released. Type 304 stainless steel . Size: 2 x 2 3/8" .
|
Braided Polyester Cord, by the Foot from NEW ENGLAND ROPES
A low-stretch cord that’s great for flag halyards, foredeck netting, or light-air spinnaker sheets. Sold by the foot. Diameter: 1/8". Best use: Utility cord, flag halyards . Construction: Braided polyester . Breaking strength: 530lb. . Stretch: 3% at 15% of breaking strength .
|
50' Braided Polyester Cord from NEW ENGLAND ROPES
A low-stretch cord that’s great for flag halyards, foredeck netting, or light-air spinnaker sheets. Length: 50'. Diameter: 1/8". Best use: Utility cord, flag halyards . Construction: Braided polyester . Breaking strength: 530lb. . Stretch: 3% at 15% of breaking strength .
|
1-7/8" Polished Brass Flush Ring Pull from ABI
Highly polished brass . Convenient flush-fitting ring pull for cabinets, small doors, and hatches. . 1-7/8"L x 1-1/2"w . Requires four #5 fasteners .
|
1/8" NPT X 5/16" Brass hose barb from MOELLER
1/8 NPT X 5/16" Brass hose barbs with male threads.
|
3/8" Bow/Stern Eye - 1.03" ID Between Studs x 4.63" Thread Length from SUNCOR
Bow / Stern Eye 304 Stainless Steel - Formed . Each U-Bolt set includes four nuts (two standard and two beveled) . Includes one bow plate, and one stern plate. . Threads are "UNC". . Stock size: 3/8" . ID between studs: 1. 03" . Thread length: 2. 50" .
|
West Marine/SOSpenders PFD Rearming Kit, 3/8" Threaded Cylinder Neck Dia. from WEST MARINE
West Marine/SOSpenders PFD Rearming Kit Style: Automatic. Cylinder Weight: 38g. Cylinder Neck Diameter: 3/8" or 1/2" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: West Marine/SOSpenders PFD . Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
Glasskoter Resin Roller Cover - 9" x 3/8" Nap from CORONA
For epoxy and polyester resinPhenolic core. Woven mohair. 3/8" nap for semi-smooth or 1/8" nap for fine finishes.
|
|
On from COLE HERSEE, M-On from COLE HERSEE, 8"H from COLE HERSEE
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Common Hot Feed Fuse Blocks
Corrosion-resistant with nickel-plated phosphor bronze fuse clips, brass bus bar and brass terminals and terminal screws. Accept all AGC and slow-blow fuses 1/4"dia.
Part No: M-643-01-BP
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories -> Switches
Switch provides lighting control on 12V negative ground systems. Sealed diecast metal case with O-ring in the shaft. Black plastic knob with metal inserts and set screw. 7/16"-28 thread mounting stem. 1-9/16"Dia. x 1-25/32"L. 7A capacity.
Part No: 74601-01-BP
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Rugged Plastic Ignition Switches
7/8" dia. hole and includes PVC boot for added weather protection. Each switch includes two keys and different key codes for added security. Nickel-silver screw terminals provide superior conductivity. 15A ignition, 20A start, 6-36V DC. M-832 is Off-Run-Start with Push-To-Choke (6 terminals) and fits panels up to 1 3/8".
Part No: M-832-BP
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories -> Switches
Normally off, with a variety of connections when pulled. Heavy-duty, noncorrosive construction with moisture-repellent insulators. Brass case, stem, terminals and mounting hardware. All knobs are screw-on type. Stems: 3/8"dia. x 1-1/4"L. 6–36V DC. Rated for 10A at 12V DC. M-527 2 Circuit SPST Switch Heavy-duty 10A OFF/ON switch controls two circuits. Brass case, 3/8" mounting shaft.
Part No: M-527-BP
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories
Normally off, with a variety of connections when pulled. Heavy-duty, noncorrosive construction with moisture-repellent insulators. Brass case, stem, terminals and mounting hardware. All knobs are screw-on type. Stems: 3/8"dia. x 1 1/4"L. 6–36V DC. Rated for 10A at 12V DC.
Part No: M-531-BP
|
|
|
|
Mount several rocker switches in a single cutout with these stacking brackets. For example, if you wanted a 3 switch panel, it would require two ends and one middle. Single are 2. 3"H x 1"W and doubles are 2.
Part No: 82159-02-BP
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories
Normally off, with a variety of connections when pulled. Heavy-duty, noncorrosive construction with moisture-repellent insulators. Brass case, stem, terminals and mounting hardware. All knobs are screw-on type. Stems: 3/8"dia. x 1-1/4"L. 6–36V DC. Rated for 10A at 12V DC.
Part No: M-476-BP
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Contura Rocker Switches
Waterproof switches are rated to IP66 for use on ship decks and with an LED light to indicate when the circuit is on. Several configurations are available for almost any application. Recommended for replacements in waterproof electrical panels with rocker switches to ensure waterproof integrity. Includes both black and gray covers. Both switches and covers are interchangeable with similar switches used as original equipment on many common boat types. Mounting Hole Size: 1. 450" x 0.
Part No: 58332-29-BP
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Round Body Connectors
A convenient way to disconnect the leads to a 12V or 24V appliance. Polarized brass contacts assure correct mating of circuits. Rated for 10 amps and can accept up to a 12 gauge marine grade stranded wire. Corrosion-resistant terminals.
Part No: M-115-BP
|
|
|
|
These rocker switches come in several different configurations for panel mounting. Available in illuminated and non-illuminated models, they feature non-glare black matte plastic housings, bezel and actuator, brass screw or blade terminals, and gasket-sealed housings. Snap-in mounting in panels from 0. 093" (2. 36mm) to 0. 187" (4.
Part No: 58327-06-BP
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Contura Rocker Switches
Waterproof switches are rated to IP66 for use on ship decks and with an LED light to indicate when the circuit is on. Several configurations are available for almost any application. Recommended for replacements in waterproof electrical panels with rocker switches to ensure waterproof integrity. Includes both black and gray covers. Both switches and covers are interchangeable with similar switches used as original equipment on many common boat types. Mounting Hole Size: 1. 450" x 0.
Part No: 58332-20-BP
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Contura Rocker Switches
Waterproof switches are rated to IP66 for use on ship decks and with an LED light to indicate when the circuit is on. Several configurations are available for almost any application. Recommended for replacements in waterproof electrical panels with rocker switches to ensure waterproof integrity. Includes both black and gray covers. Both switches and covers are interchangeable with similar switches used as original equipment on many common boat types. Mounting Hole Size: 1. 450" x 0.
Part No: 58332-28-BP
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Emergency Cut-Off Switch
Add safety to older boats easily. In an emergency, a quick pull on the lanyard stops the engine, preventing accidental runaway. Installs directly into ignition line.
Part No: M-598-BP
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories -> Switches->Toggle Switches
All non-corroding construction with moisture-repellent insulators and silver contacts. MOM/M-On denote momentary. Lighted Toggle Swithces: White Off/Red On Chrome-Plated: Single Pole Switches, Off/On positions only Max 10A@12V Fit panels to 1/4" thick Mount in 15/32" dia.
Part No: 54103-BP
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories -> Switches
Gasket-sealed brass case protects against moisture and dirt. Fits panels up to 3/4" thick.
Part No: M-485-BP
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Rubber Button Covers
Protect switch mechanism from water and dirt with snap-on covers.
Part No: 407-01-BP
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories
Normally off, with a variety of connections when pulled. Heavy-duty, noncorrosive construction with moisture-repellent insulators. Brass case, stem, terminals and mounting hardware. All knobs are screw-on type. Stems: 3/8"dia. x 1 1/4"L. 6–36V DC. Rated for 10A at 12V DC. M-628 Off/On Switch Chrome-plated 7/8"dia. brass knob.
Part No: M-628-BP
|
|
|
|
|
These rocker switches come in several different configurations for panel mounting. Available in illuminated and non-illuminated models, they feature non-glare black matte plastic housings, bezel and actuator, brass screw or blade terminals, and gasket-sealed housings. Snap-in mounting in panels from 0. 093" (2. 36mm) to 0. 187" (4.
Part No: 58328-100-BP
|
|
|
|
Home -> Electrical -> Meters & Distribution -> Distribution Panels->12V LED Pilot Indicator Lights
Solid-state LED diodes never need replacement. Bright chrome-plated body, bezel, washer and hexnut. Quick connect terminals are polarized for ease of wiring. Fits into panels 0. 020" through 0. 300" thick (0. 5 to 7. 6mm).
Part No: PL-612-R-BP
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories
Like M-490, but with recessed button and flanged face nut to prevent accidental activation.
Part No: M-612-BP
|
|
|
|
|
These rocker switches come in several different configurations for panel mounting. Available in illuminated and non-illuminated models, they feature non-glare black matte plastic housings, bezel and actuator, brass screw or blade terminals, and gasket-sealed housings. Snap-in mounting in panels from 0. 093" (2. 36mm) to 0. 187" (4.
Part No: 58027-07-BP
|
|
|
|
|
These rocker switches come in several different configurations for panel mounting. Available in illuminated and non-illuminated models, they feature non-glare black matte plastic housings, bezel and actuator, brass screw or blade terminals, and gasket-sealed housings. Snap-in mounting in panels from 0. 093" (2. 36mm) to 0. 187" (4.
Part No: 58027-02-BP
|
|
|
|
Home -> Electrical -> Interior Lighting -> Lighting Accessories->Double Contact Bayonet Bulb Sockets
Fit 12V miniature lamps with bayonet bases Spring-loaded brass contacts . 8'' & 6" wire leads .
Part No: 26100-BP
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Contura Rocker Switches
Waterproof switches are rated to IP66 for use on ship decks and with an LED light to indicate when the circuit is on. Several configurations are available for almost any application. Recommended for replacements in waterproof electrical panels with rocker switches to ensure waterproof integrity. Includes both black and gray covers. Both switches and covers are interchangeable with similar switches used as original equipment on many common boat types. Mounting Hole Size: 1. 450" x 0.
Part No: 58332-26-BP
|
|
|
|
|
Home -> Electrical -> Meters & Distribution -> Distribution Panels->12V LED Pilot Indicator Lights
Solid-state LED diodes never need replacement. Bright chrome-plated body, bezel, washer and hexnut. Quick connect terminals are polarized for ease of wiring. Fits into panels 0. 020" through 0. 300" thick (0. 5 to 7. 6mm).
Part No: PL-612-G-BP
|
|
|
|
Two position is for engines with a separate starter pushbutton. Three position: Off/Ignition/Start. Four position: Accessory/ Off/Ignition/Start or Off/Run/Push to Choke/Battery-Start (magneto switch). Brass construction, 2 keys supplied. 13/16" dia. mounting hole.
Part No: M-550-14-BP
|
|
|
|
|
These rocker switches come in several different configurations for panel mounting. Available in illuminated and non-illuminated models, they feature non-glare black matte plastic housings, bezel and actuator, brass screw or blade terminals, and gasket-sealed housings. Snap-in mounting in panels from 0. 093" (2. 36mm) to 0. 187" (4.
Part No: 58327-01-BP
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories -> Switches
Corrosion-resistant brass with silver contacts. Molded plastic insulator with protective barrier between terminals. Fits panels up to 1" thick.
Part No: M-490-BP
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers
Two solenoids in one saves money and simplifies wiring. Rated at 75A make and break at 12V. DPDT intermittent duty.
Part No: 24450
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Contura Rocker Switches
Waterproof switches are rated to IP66 for use on ship decks and with an LED light to indicate when the circuit is on. Several configurations are available for almost any application. Recommended for replacements in waterproof electrical panels with rocker switches to ensure waterproof integrity. Includes both black and gray covers. Both switches and covers are interchangeable with similar switches used as original equipment on many common boat types. Mounting Hole Size: 1. 450" x 0.
Part No: 58332-27-BP
|
|
|
