|
|
Stainless steel knob for Edson wheel brake For Edson wheel pedestal brakes, a highly-polished, stainless-steel brake knob to directly replace Edson’s plastic model.
Part No: 825ST-1
|
|
|
|
Stainless guard feet secure the guard to the cockpit sole. Fits existing mounting position as original black plastic feet. Kit includes two feet, deck guards, bolts, set screws and bushings.
Part No: 310ST-100-125
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr
UV-resistant white vinyl laminate. Secures with a Velcro tie Fits 5"-7" dia.
Part No: 693-5
|
|
|
|
Stainless-steel guard protects your wheel and pedestal while providing a secure handhold. Includes new stainless guard feet, stainless gasketed top plate and mounting hardware. 1-1/8" dia.
Part No: 1600-45-58S
|
|
|
|
Home -> Sailboat -> Rigging Products -> Shroud Covers, Mast Boots->Leather Spreader Boot Kits
Protect your sails from chafe and tears with custom-cut and hand-stitched leather spreader boots laced around the spreader tip. Kits include pre-punched leather for a pair of boots, heavy waxed polyester thread for lacing, hand-stitching needle and instructions.
Part No: 1401-1
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr
Pre-drilled to fit the Garmin 45 mounting bracket; also accepts most other round GPS brackets up to 3" (76mm) Arm designed to attach to all 1" & 1-1/4" pedestal guard tubes without removing tubes or existing wiring .
Part No: 831ST-3-100
|
|
|
|
Home -> Sailboat -> Tiller & Rudder->Stainless Dished Destroyer™ Wheels
These 5-spoke wheels are the latest addition to Edson’s line of Destroyer™ Wheels. Attractive, dished shape and newly-styled, straight hub. Tapered, hollow spokes. Lightweight 1" ovalized grip tubing is the industry standard for smooth wheel steering. 1" bore fits most Edson wheel shafts. Requires Wheel Nut fastener.
Part No: 645ST-30-5
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr->Pedestal Maintenance and Rebuild Kits
Three kits: Maintenance Kit includes two snap rings, two spare shaft keys, a 1/2oz. tube of white Teflon lubricant and Loctite 242. Rebuild Kit includes snap rings (2), shaft keys (3), needle bearing sets (2), nylon washers, an O-ring, Locktite 242, a white Teflon lubricant, and a complete Pedestal Maintenance Guide.
Part No: 316-689
|
|
|
|
Home -> Engine Systems -> Steering Systems
Instantly improve your boat handling! Steer your boat like a pro with the Edson Pro Series PowerKnob. Made of marine 316 stainless, this knob turns on two rows of Delrin ball bearings for smooth operation. Easy-to-mount strap-on design includes tool for installation. Fits all wheel rims 5/8" to 1-1/8" diameter.
Part No: 969ST-18
|
|
|
|
Home -> Engine Systems -> Motor Mounts -> Motor Mounts
Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with nonskid pad, bolted to the UV stable poly backing board always looks shipshape. no more varnishing. Comes complete with hardware to attach to any standard 1'' (2. 5cm) stainless rail. Warning: Be sure the engine is securely tied onto the backing board and the engine mounts are tightened whenever the engine is stored on Edson's Outboard Motor Mount.
Part No: 521-100ST
|
|
|
|
Home -> Sailboat -> Sailboat Canvas->Leather Wheel Kits
Steer more comfortably with a wheel that’s never too hot or too cold. Suede leather fits 7/8"dia. tubing. Each kit fits a range of wheel sizes<\m>simply cut the length to fit your wheel.
Part No: 733-22-30-GRAY
|
|
|
|
|
Home -> Sailboat -> Rigging Products -> Shroud Covers, Mast Boots->Leather Spreader Boot Kits
Protect your sails from chafe and tears with custom-cut and hand-stitched leather spreader boots laced around the spreader tip. Kits include pre-punched leather for a pair of boots, heavy waxed polyester thread for lacing, hand-stitching needle and instructions.
Part No: 1401-3
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr->Wheel Nuts
Necessary to fix a destroyer wheel on your existing wheel shaft. Standard model is a polished stainless hexagonal nut. Quick Release model is a 2" dia. cast stainless knurled knob, which can be removed by hand. Fit Edson standard shafts (1"-14), except 303884, which fits 3/4"-10 shafts. Each ShWt 0.
Part No: 673ST-1-14
|
|
|
|
|
Home -> Sailboat -> Sailboat Canvas->Leather Wheel Kits
Steer more comfortably with a wheel that’s never too hot or too cold. Suede leather fits 7/8"dia. tubing. Each kit fits a range of wheel sizes<\m>simply cut the length to fit your wheel.
Part No: 733-22-30-TAN
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks
Cast aluminum step makes boarding from your tender safer and more pleasurable. Baked-on gloss urethane finish. Built-in neoprene bumpers protect topside finish.
Part No: 520-14
|
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr->Stainless Dished Destroyer™ Wheels
These 5-spoke wheels are the latest addition to Edson’s line of Destroyer™ Wheels. Attractive, dished shape and newly-styled, straight hub. Tapered, hollow spokes. Lightweight 1" ovalized grip tubing is the industry standard for smooth wheel steering. 1" bore fits most Edson wheel shafts. Requires Wheel Nut fastener.
Part No: 645ST-36-5
|
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr->Wheel Nuts
Necessary to fix a destroyer wheel on your existing wheel shaft. Standard model is a polished stainless hexagonal nut. Quick Release model is a 2" dia. cast stainless knurled knob, which can be removed by hand. Fit Edson standard shafts (1"-14), except 303884, which fits 3/4"-10 shafts. Each ShWt 0.
Part No: 826ST-1-14
|
|
|
|
|
Home -> Sailboat -> Sailboat Canvas->Leather Wheel Kits
Steer more comfortably with a wheel that’s never too hot or too cold. Suede leather fits 7/8"dia. tubing. Each kit fits a range of wheel sizes<\m>simply cut the length to fit your wheel.
Part No: 733-42-60-GRAY
|
|
|
|
|
Home -> Sailboat -> Tiller & Rudder->Pedestal Maintenance and Rebuild Kits
Three kits: Maintenance Kit includes two snap rings, two spare shaft keys, a 1/2oz. tube of white Teflon lubricant and Loctite 242. Rebuild Kit includes snap rings (2), shaft keys (3), needle bearing sets (2), nylon washers, an O-ring, Locktite 242, a white Teflon lubricant, and a complete Pedestal Maintenance Guide.
Part No: 314-335
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr->Chain & Wire Kits
Pre-assembled with one length of roller chain and two lengths of wire. The connections between wire and chain are covered in clear shrink plastic to prevent fouling. All roller chain and wire rope are stainless, and the chain end fittings are cotter-pinned for ease of maintenance. Now includes connecting hardware/ tensioning kit.
Part No: 774-2S15B9
|
|
|
|
|
Home -> Sailboat -> Tiller & Rudder->Chain & Wire Kits
Pre-assembled with one length of roller chain and two lengths of wire. The connections between wire and chain are covered in clear shrink plastic to prevent fouling. All roller chain and wire rope are stainless, and the chain end fittings are cotter-pinned for ease of maintenance. Now includes connecting hardware/ tensioning kit.
Part No: 774-2S2B13
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr->Carbon Pro Wheels
5kg) and feature a unique forked tri-spoke design, superb strength and fingertip sensitivity. Available from 35" (900mm) to 48" (1200mm), they are fabricated from carbon fiber using one piece monocoque construction, making them super strong and super light. The high gloss clear coat finish over carbon fabric weave yields a high-tech look that complements both a Grand Prix racer and a Superyacht. Large diameter 1-5/8" wheel rim . Monocoque construction for strength .
Part No: 659-1200-48
|
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr->Carbon Pro Wheels
5kg) and feature a unique forked tri-spoke design, superb strength and fingertip sensitivity. Available from 35" (900mm) to 48" (1200mm), they are fabricated from carbon fiber using one piece monocoque construction, making them super strong and super light. The high gloss clear coat finish over carbon fabric weave yields a high-tech look that complements both a Grand Prix racer and a Superyacht. Large diameter 1-5/8" wheel rim . Monocoque construction for strength .
Part No: 659-0900-35
|
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr->Carbon Pro Wheels
5kg) and feature a unique forked tri-spoke design, superb strength and fingertip sensitivity. Available from 35" (900mm) to 48" (1200mm), they are fabricated from carbon fiber using one piece monocoque construction, making them super strong and super light. The high gloss clear coat finish over carbon fabric weave yields a high-tech look that complements both a Grand Prix racer and a Superyacht. Large diameter 1-5/8" wheel rim . Monocoque construction for strength .
Part No: 659-1100-44
|
|
|
|
|
Home -> Sailboat -> Tiller & Rudder->Carbon Pro Wheels
5kg) and feature a unique forked tri-spoke design, superb strength and fingertip sensitivity. Available from 35" (900mm) to 48" (1200mm), they are fabricated from carbon fiber using one piece monocoque construction, making them super strong and super light. The high gloss clear coat finish over carbon fabric weave yields a high-tech look that complements both a Grand Prix racer and a Superyacht. Large diameter 1-5/8" wheel rim . Monocoque construction for strength .
Part No: 659-1000-40
|
|
|
|
Home -> Engine Systems -> Motor Mounts -> Motor Mounts
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.
Part No: 521-125AL
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr
Fold-Down Towers are perfect for trailer boats, low bridge clearance and end-of-the-season storage. By using a Pivot Bracket and Fold-Down Adapter with your Standard Radar Mast, you can also mount your radar on a raked transom or coaming side.
Part No: 990-35
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Water Heaters
EEMAX Electric Instantaneous Water Heaters Hot water on demand. This unit turns on automatically and shuts off again when water flow stops – no waiting for a storage tank to heat up. Requires only one cold water input line and mounts on bulkhead. Constructed of high strength reinforced salt water resistant plastic and stainless steel. Runs on 120V shore power Compact size (10. 75”L x 5. 25”W x 2.
Part No: EX3012M
|
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Water Heaters
EEMAX Electric Instantaneous Water Heaters Hot water on demand. This unit turns on automatically and shuts off again when water flow stops – no waiting for a storage tank to heat up. Requires only one cold water input line and mounts on bulkhead. Constructed of high strength reinforced salt water resistant plastic and stainless steel. Runs on 120V shore power Compact size (10. 75”L x 5. 25”W x 2.
Part No: EX2412M
|
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Water Heaters
Hot water on demand. This unit turns on automatically and shuts off again when water flow stops – no waiting for a storage tank to heat up. Requires only one cold water input line and mounts on bulkhead. Constructed of high strength reinforced salt water resistant plastic and stainless steel. Runs on 120V shore power Compact size (10. 75”L x 5. 25”W x 2.
Part No: EX3512M
|
|
