Top Sellers
Swivel Anchor Connector, 5/16"–7/16" Chain, 2750lb. SWL from WEST MARINE
18-8 stainless swivel connectors prevent snagging at the anchor/chain connection, slide easily over anchor rollers and prevent the chain from becoming twisted while the anchor is set. Attach with a single set screw (using the Allen wrench included).
|
1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.
|
Honda Fuel Line Connector, Moeller 033501-10 from MOELLER
Moeller 033501-10: Male bayonet tank connector, 1/4" NPT, 1991 and newer. Moeller 033496-10: Male bayonet style tank connector with 1/4" NPT, brass. Moeller 033502-10: Bayonet style female tank connector, 3/8" barb, 1991 and newer.
|
Fuel Line - 5/16" - Universal from MOELLER
Each assembly comes complete with a large alcohol resistant primer bulb with fittings, co-extruded braided fuel line hose which is alcohol resistant, and barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts. Uses o-ring construction on all fittings for tight, leak-free connections. Specifications: 5/16".
|
Electric Bilge Pump Installation Kit from ANCOR MARINE
Essential items for installing a bilge pump Convenient package includes four #8 x 3/4" stainless-steel panhead screws, one 1-3/4" x 3/4" stainless steel hose clamp, and three 16-14AWG heat shrink butt connectors.
|
1-7/8" Brass Standard Hasp from ABI
Highly polished brass . Fixed eye (does not swivel). 1"w x 1-7/8"L. Padlock hole diameter 5/16" .
|
Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.
|
OSCO CRUSADER ELBOW FOR LOWER SWIVEL from OSCO MOTORS CORP.
Exhaust Elbow Lower Swivel - 3" Outlet Replaces Crusader #97387 .
|
5/16" Wire Rope Clamp from SEADOG
Investment Cast 316 Stainless Body / AISI 304 Stainless U-Bolt. Accepts 5/16" wire. 1-5/8" Long. 1-3/8" wide.
|
Shore Power Cord Storage & Connector Box from SAIL SYSTEMS
Connect and store 30 amp shore power and phone cords in this high-gloss acrylic capped ABS box. Molded supports hold coiled power cord and installed connector. Gasketed "Slimline" door with hidden fasteners for a flush look and weather resistance.
|
|
|
1/8" NPT X 5/16" Brass hose barb from MOELLER
1/8 NPT X 5/16" Brass hose barbs with male threads.
|
1/4" NPT X 5/16" Brass hose barb from MOELLER
1/4 NPT X 5/16" Brass hose barbs with male threads.
|
|
|
Black 3-Strand Nylon, 7/16'' Diameter, 5300lb. Breaking Strength from NEW ENGLAND ROPES
Dramatic resistance to damaging internal and external abrasion Combining premium nylon fiber with a high-quality marine coating and New England Rope’s superior manufacturing processes produces line that is five times more abrasion-resistant wet than any other nylon line. You can actually feel this critical performance advantage when you handle the supple line. Stretch: 16% at 15% of breaking strength. *Approximately 10–15% less strength than White Premium Three-Strand Nylon.
|
|
16" Swiveling Connector from EQUIPLITE, 10mm from EQUIPLITE
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Epifanes-Effect Varnish
Use with Epifanes finishes to assure optimum results Provides a lustrous satin finish with excellent resistance to moisture, chemicals and abrasion, while giving an air of quiet distinction to boat interiors. 1000ml. (1. 06qt. ) Color: Clear amber. 150 to 300 sq. ft. /liter. Drying time: To touch: 3 hrs; overcoating: 12 hrs. @ 65°F 65%RH. Finish: Semi-gloss satin.
Part No: TPVB.500
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Oils & Sealers->Gloss and Matte Wood Finishes
Both products feature a three-day window for recoating without sanding for adhesion. Gloss may be used as a stand-alone finish or top coated with Epifanes Clear High Gloss Varnish for maximum UV protection. Wood Finish Matte offers a beautiful satin sheen in an exterior coating applied on top of gloss. Recommended Usage: Exterior and interior, above water . Formulation: Synthetic wood finish . Application Method(s): Brush, roller or spray . Drying Time: To touch: 3 hrs. , overcoat: 24 hrs.
Part No: WFG.1000
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Epifanes-Effect Varnish
Use with Epifanes finishes to assure optimum results Provides a lustrous satin finish with excellent resistance to moisture, chemicals and abrasion, while giving an air of quiet distinction to boat interiors. 1000ml. (1. 06qt. ) Color: Clear amber. 150 to 300 sq. ft. /liter. Drying time: To touch: 3 hrs; overcoating: 12 hrs. @ 65°F 65%RH. Finish: Semi-gloss satin.
Part No: TPVB.1000
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Epifanes-Effect Varnish
Use with Epifanes finishes to assure optimum results Provides a lustrous satin finish with excellent resistance to moisture, chemicals and abrasion, while giving an air of quiet distinction to boat interiors. 1000ml. (1. 06qt. ) Color: Clear amber. 150 to 300 sq. ft. /liter. Drying time: To touch: 3 hrs; overcoating: 12 hrs. @ 65°F 65%RH. Finish: Semi-gloss satin.
Part No: RE.1000
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Varnishes->Clear High-Gloss Varnish
This trusted varnish produces beautiful results! Formulated with a high solids content of Chinese tung oil, combined with non-yellowing, modified alkyd resins and blended with a perfect balance of UV absorbers. It provides high build and superior gloss, flow and durability. Excellent flexibility and water resistance in all climates. Recommended Usage: Exterior or interior, above water . Additives: UV inhibitors . Application Methods: Brush, roll or spray . ; overcoat: 24 hrs. @ 65°F 65%RH .
Part No: CV.500
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Oils & Sealers->Gloss and Matte Wood Finishes
Both products feature a three-day window for recoating without sanding for adhesion. Gloss may be used as a stand-alone finish or top coated with Epifanes Clear High Gloss Varnish for maximum UV protection. Wood Finish Matte offers a beautiful satin sheen in an exterior coating applied on top of gloss. Recommended Usage: Exterior and interior, above water . Formulation: Synthetic wood finish . Application Method(s): Brush, roller or spray . Drying Time: To touch: 3 hrs. , overcoat: 24 hrs.
Part No: WFM.1000
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil
It can be used on all types of interior and exterior wood as an insulation coat, sealer, or filling coat for one-component or two component synthetic or polyester based varnish systems. PP Varnish Extra is an excellent insulating sealer for oily, greasy and vaporous woods such as Teak and Iroco. For maximum UV resistance it is recommended to topcoat with two or more coats of Epifanes Clear Varnish, Epifanes Wood finish Gloss, or Epifanes Polyurethane Clear Gloss Finish. Brush, roll or spray.
Part No: PPX.2000
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Equiplite Non Swivelling Connector
Non-Swiveling Connectors features a protective locking Velcro strap An anodized Hi-tensile Aluminum bobbin with a replaceable loop fitted in the center. Protective locking Velcro strap .
Part No: 12-6NS
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Swiveling Connectors
Swiveling Connectors designed and intended for halyard connections Will reduce weight aloft for halyards. Dynex loops are 80% lighter than traditional stainless shackles, but can take the same loads. Use high-load Polymer swivels for easy rotation, and do not jam.
Part No: 12-6S
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Swiveling Connectors
Swiveling Connectors designed and intended for halyard connections Will reduce weight aloft for halyards. Dynex loops are 80% lighter than traditional stainless shackles, but can take the same loads. Use high-load Polymer swivels for easy rotation, and do not jam.
Part No: 10-5S
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Equiplite Non Swivelling Connector
Non-Swiveling Connectors features a protective locking Velcro strap An anodized Hi-tensile Aluminum bobbin with a replaceable loop fitted in the center. Protective locking Velcro strap .
Part No: 10-5NS
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Equiplite Non Swivelling Connector
Non-Swiveling Connectors features a protective locking Velcro strap An anodized Hi-tensile Aluminum bobbin with a replaceable loop fitted in the center. Protective locking Velcro strap .
Part No: 8-5NS
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Swiveling Connectors
Swiveling Connectors designed and intended for halyard connections Will reduce weight aloft for halyards. Dynex loops are 80% lighter than traditional stainless shackles, but can take the same loads. Use high-load Polymer swivels for easy rotation, and do not jam.
Part No: 6-3S
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Equiplite Non Swivelling Connector
Non-Swiveling Connectors features a protective locking Velcro strap An anodized Hi-tensile Aluminum bobbin with a replaceable loop fitted in the center. Protective locking Velcro strap .
Part No: 14-8NS
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Swiveling Connectors
Swiveling Connectors designed and intended for halyard connections Will reduce weight aloft for halyards. Dynex loops are 80% lighter than traditional stainless shackles, but can take the same loads. Use high-load Polymer swivels for easy rotation, and do not jam.
Part No: 14-8S
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Equiplite Non Swivelling Connector
Non-Swiveling Connectors features a protective locking Velcro strap An anodized Hi-tensile Aluminum bobbin with a replaceable loop fitted in the center. Protective locking Velcro strap .
Part No: 5-3NS
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Equiplite Non Swivelling Connector
Non-Swiveling Connectors features a protective locking Velcro strap An anodized Hi-tensile Aluminum bobbin with a replaceable loop fitted in the center. Protective locking Velcro strap .
Part No: 6-4NS
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Swiveling Connectors
Swiveling Connectors designed and intended for halyard connections Will reduce weight aloft for halyards. Dynex loops are 80% lighter than traditional stainless shackles, but can take the same loads. Use high-load Polymer swivels for easy rotation, and do not jam.
Part No: 8-4S
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Swiveling Low-Cost Connectors
The EquipLite Swiveling Low-Cost Connectors boast a weight savings of approximately 70%–80% over traditional stainless shackles. ). High-strength material—low friction, impact-resistant The swivel quick connectors use high-strength Hardkote–anodized high-tensile aluminum body with high-load polymer bearing technology for easy rotation. Reduced damage to the rig—safe and will not jam if overloaded The compact swivel quick connector with Velcro wrap protection reduces damage to the rig.
Part No: SM-14
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Non-Swiveling, Low-Cost Connectors
, when flogging during tacks or pre-start. These connectors are easy and quick to attach; they are ideal for jib sheets, spinnaker sheets and lower load halyards (spinnaker, topping lifts, etc. The advance of the quick loop The specially designed NS Connector system becomes an extension of the spliced rope. Three times stronger than a bowline, it's never hard to undo. High-strength material The NS Connector has a high-tensile aluminum body technology with unmatched impact and wear resistance.
Part No: NSM-10
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Non-Swiveling, Low-Cost Connectors
, when flogging during tacks or pre-start. These connectors are easy and quick to attach; they are ideal for jib sheets, spinnaker sheets and lower load halyards (spinnaker, topping lifts, etc. The advance of the quick loop The specially designed NS Connector system becomes an extension of the spliced rope. Three times stronger than a bowline, it's never hard to undo. High-strength material The NS Connector has a high-tensile aluminum body technology with unmatched impact and wear resistance.
Part No: NSM-6
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Non-Swiveling, Low-Cost Connectors
, when flogging during tacks or pre-start. These connectors are easy and quick to attach; they are ideal for jib sheets, spinnaker sheets and lower load halyards (spinnaker, topping lifts, etc. The advance of the quick loop The specially designed NS Connector system becomes an extension of the spliced rope. Three times stronger than a bowline, it's never hard to undo. High-strength material The NS Connector has a high-tensile aluminum body technology with unmatched impact and wear resistance.
Part No: NSM-14
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Non-Swiveling, Low-Cost Connectors
, when flogging during tacks or pre-start. These connectors are easy and quick to attach; they are ideal for jib sheets, spinnaker sheets and lower load halyards (spinnaker, topping lifts, etc. The advance of the quick loop The specially designed NS Connector system becomes an extension of the spliced rope. Three times stronger than a bowline, it's never hard to undo. High-strength material The NS Connector has a high-tensile aluminum body technology with unmatched impact and wear resistance.
Part No: NSM-12
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Non-Swiveling, Low-Cost Connectors
, when flogging during tacks or pre-start. These connectors are easy and quick to attach; they are ideal for jib sheets, spinnaker sheets and lower load halyards (spinnaker, topping lifts, etc. The advance of the quick loop The specially designed NS Connector system becomes an extension of the spliced rope. Three times stronger than a bowline, it's never hard to undo. High-strength material The NS Connector has a high-tensile aluminum body technology with unmatched impact and wear resistance.
Part No: NSM- 8
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
The EquipLite Swiveling Low-Cost Connectors boast a weight savings of approximately 70%–80% over traditional stainless shackles. ). High-strength material—low friction, impact-resistant The swivel quick connectors use high-strength Hardkote–anodized high-tensile aluminum body with high-load polymer bearing technology for easy rotation. Reduced damage to the rig—safe and will not jam if overloaded The compact swivel quick connector with Velcro wrap protection reduces damage to the rig.
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Swiveling Low-Cost Connectors
The EquipLite Swiveling Low-Cost Connectors boast a weight savings of approximately 70%–80% over traditional stainless shackles. ). High-strength material—low friction, impact-resistant The swivel quick connectors use high-strength Hardkote–anodized high-tensile aluminum body with high-load polymer bearing technology for easy rotation. Reduced damage to the rig—safe and will not jam if overloaded The compact swivel quick connector with Velcro wrap protection reduces damage to the rig.
Part No: SM-12
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Swiveling Low-Cost Connectors
The EquipLite Swiveling Low-Cost Connectors boast a weight savings of approximately 70%–80% over traditional stainless shackles. ). High-strength material—low friction, impact-resistant The swivel quick connectors use high-strength Hardkote–anodized high-tensile aluminum body with high-load polymer bearing technology for easy rotation. Reduced damage to the rig—safe and will not jam if overloaded The compact swivel quick connector with Velcro wrap protection reduces damage to the rig.
Part No: SM-8
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Swiveling Low-Cost Connectors
The EquipLite Swiveling Low-Cost Connectors boast a weight savings of approximately 70%–80% over traditional stainless shackles. ). High-strength material—low friction, impact-resistant The swivel quick connectors use high-strength Hardkote–anodized high-tensile aluminum body with high-load polymer bearing technology for easy rotation. Reduced damage to the rig—safe and will not jam if overloaded The compact swivel quick connector with Velcro wrap protection reduces damage to the rig.
Part No: SM-6
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Swiveling Low-Cost Connectors
The EquipLite Swiveling Low-Cost Connectors boast a weight savings of approximately 70%–80% over traditional stainless shackles. ). High-strength material—low friction, impact-resistant The swivel quick connectors use high-strength Hardkote–anodized high-tensile aluminum body with high-load polymer bearing technology for easy rotation. Reduced damage to the rig—safe and will not jam if overloaded The compact swivel quick connector with Velcro wrap protection reduces damage to the rig.
Part No: SM-10
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
, when flogging during tacks or pre-start. These connectors are easy and quick to attach; they are ideal for jib sheets, spinnaker sheets and lower load halyards (spinnaker, topping lifts, etc. The advance of the quick loop The specially designed NS Connector system becomes an extension of the spliced rope. Three times stronger than a bowline, it's never hard to undo. High-strength material The NS Connector has a high-tensile aluminum body technology with unmatched impact and wear resistance.
|
|
|
