Top Sellers
Methyl Ethyl Ketone Solvent - Quart from KLEAN STRIP
A strong cleanup solvent—very effective for epoxiesMEK has characteristics similar to acetone, but is 30% slower evaporating.
|
Resin Coloring Agent - Brown from EVERCOAT
Match colors like a pro with these coloring agentsFor use with polyester or epoxy resins, fillers, or putties. These tints also work well with nonskid coatings. Use with West Marine Gel Coat or Evercoat Polyester Gel Paste.
|
Fiberglass Cleaner and Wax - Quart from SEAPOWER MARINE PROD
Cleans and waxes in one easy stepCleans, waxes, seals and protects the fiberglass surface. Contains the finest Carnauba waxes and silicones and removes surface oxidation, residue, dock marks, grease and dirt while leaving behind a durable high-gloss finish. Excellent for hand or machine use. Quart.
|
Adaptor Fitting for Suzuki & Honda Lower Units from WEST MARINE
Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefisher lower units Fits standard quart plastic bottles. Flexible hose gets to hard-to-reach fill plugs.
|
Teak Care - Brightener, Quart from STARBRITE
Clean, brighten and protect your teak in three easy stepsBeautiful teak in three easy steps! Kit contains three pint-sized bottles, one each of Cleaner to remove stains and weathering; Brightener to highlight the natural grain and enhance color; and Oil to seal and protect wood from weather and UV damage. Individual, quart-sized bottles are also available. Cleaner chemically roots out stains, including ugly black mildew stains. Brightener restores teak's lustrous hue.
|
Cetol Marine Light - Quart from INTERLUX
Enhances and protects the natural beauty of interior and exterior woodSemi-transparent finish prevents weathering and repels water. just wash wood thoroughly and apply. Three coats are recommended for the first application, followed by annual touchups. Marine Light is more translucent than Marine. If a gloss finish is desired, either may be overcoated with Marine Gloss. Quart. Long-lasting adhesion and protection from UV rays and weathering. Flexible, breathable, translucent finish; Quarts.
|
FLAG Resin, 1/2 Gallon from MAS EPOXY
We highly recommend this resin for general purpose gluing applications where wet-out of fiberglass is not a consideration, and for all your filleting and fairing needs. FLAG Resin is a "medium" body resin specifically designed to perform as an adhesive and structural laminating foundation. FLAG is more reactive than our Low Viscosity Resin when mixed with Medium Hardener. FLAG Resin may be used with all MAS Hardeners, however, for filled applications we recommend our Medium Hardener.
|
Calibrated Resin Pump Set from MAS EPOXY
For use with 1 quart, 1/2 gallon, 1 gallon, 4 gallon and 5 gallon size containers.
|
|
|
Cleaning Detail Liquid Cream Cleaner from MARIKATE SHIPSHAPE
Cleans and brightens fiberglass—and much more!Cleans and brightens fiberglass, marine metals and vinyl. Easy to use on most surfaces above the waterline. great for non-skid decks. Removes dirt, grease, grime, chalking on fiberglass and aluminum boats, and much much more. Makes difficult cleaning jobs easy. Quart.
|
G/Flex 655 Resin 4.75 Gal. from WEST SYSTEM
G/flex 655 Thickened Epoxy Adhesive comes with a thickening agent already added. G/flex offers important features: Toughness and Flexibility G/flex has been toughened. With a modulus of elasticity of 150,000 psi (WEST SYSTEM 105 Resin/205 Hardener has a modulus of elasticity of 450,000 psi), G/flex is more flexible and can deflect further than WEST SYSTEM 105/205, while being much stiffer than typical adhesive sealants. Bonds to wet and damp surfaces G/flex has the ability to glue damp woods.
|
LP Enamel - Hatteras White, Quart from STERLING
A popular choice among many boatyard professionals as well as do-it-yourself boat owners who want superb gloss and durability. Pros spray it, yet the Sterling Brushing System captures the same look, thanks to its unique flow properties. Sterling brushing system: Pick a color base, mix 2:1 with U-2964. Add a dash of U-2900 accelerator in cool weather. Thin about 25% with U-2965. Apply on nonskid surfaces with low-nap foam rollers and tip several times. Apply with premium China bristle brush.
|
Micron CSC Antifouling Paint, Red, Quart from INTERLUX
Haul and relaunch without loss of performance The innovative copper-copolymer formula of Micron CSC provides a controlled release of antifouling biocide at the paint surface, which means that the longevity of the coating is related to the amount of paint applied. Can be applied over most paints in good condition. Micron CSC will not lose its effectiveness when hauled out of the water for extended periods of time (such as winter storage). Type: Copolymer . 2% Cuprous Oxide . Additives: None .
|
Brightside Pre-Kote Primer - Gray, Quart from INTERLUX
Fills minor blemishes and sands easilyOne part primer for use with Brightside or any other one-part topside enamel. Microspheres provide high build and improved sandability. (Replaces Brightside Primer and 279 White Undercoater. ) Application: Brush, roller, airless/conventional spray . Number of Coats Recommended: One or two, depending on surface condition. Drying: Overcoating: 6 to 12 hrs. Drying Time: To touch: 1 to 3 hrs. Coverage: Brush: 112 sq. ft/qt, 450 sq. ft/gal; Spray: 87 sq.
|
Teak Sealer/Dressing - Quart from TEAK WONDER
Restores and protects the splendid beauty of teakTwo-part system cleans away dirt and black discoloration and restores teak to a lustrous hue. Won't affect paint, varnish or metal surfaces. Follow up with Sealer/Dressing Step one loosens dirt and mildew. Step two neutralizes step one. Rinsing reveals the bright natural beauty of the wood.
|
|
Acetone - Quart from EVERCOAT, Surfacing Resin - Quart from EVERCOAT
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Skid-No-More Paint
Textured, skid-resistant acrylic latex coating for docks, ramps, steps or poolside. Excellent alternative to nonskid tape. Light gray color can be tinted using gel coat coloring agents. Easy-to-apply nonskid coating for deck or dock. Use in place of nonskid tape. Light gray color can be tinted using coloring agents.
Part No: 100853
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Putties, Sealers, Misc->Formula 27 Filler
Polyester filler for reliable dent, ding and gouge repairsQuality water-resistant, extra-white plastic filler for filling dents in wood, fiberglass and metal. Won’t sag. Includes hardener. Formulation: White polyester filler . Recommended Usage: Fills dents and scrapes in wood, fiberglass, stucco, cement, drywall and some metals. Color: White, may be mixed with coloring agent to tint to desired shade. Does not shrink after curing. Won't crack or pop out.
Part No: 100572
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Resin Coloring Agent
Match colors like a pro with these coloring agentsFor use with polyester or epoxy resins, fillers, or putties. These tints also work well with nonskid coatings. Use with West Marine Gel Coat or Evercoat Polyester Gel Paste.
Part No: 100509
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Polyester Laminating Resin
Remains tacky for adhesion to fiberglass layupsRemains tacky. For multiple fiberglass layups and holding fiberglass on vertical surfaces during layup. Not for final coat. Catalyst included. Formulation: Polyester Laminating Resin. Recommended Usage: Laminating multiple layers of mat and cloth . Cure Time: 4 hours .
Part No: 100561
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Liquid Hardener for Polyester Surfacing Resin
A liquid methyl ethyl ketone-peroxide (MEK-P) hardener. For use with all polyester resin and gelcoat. . Graduated measure for mixing convenience.
Part No: 100602
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass
Keep onboard for use when neededUse to strengthen, repair, and rebuild fiberglass, metal, plastic, and most woods. Includes 8oz. of polyester resin with hardener, 3sq. ft. fiberglass cloth, plastic spread-stick, mixing tray, and instructions. For use above or below the waterline. Strengthen, repair, or rebuild fiberglass, metal, plastic, and wood. Kit includes 8oz. of polyester resin with hardener, 3sq. ft. fiberglass cloth, plastic spread-stick, mixing tray, and instructions.
Part No: 100637
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass
Use with polyester and epoxy resins for reliable, high-strength coverings, laminates, and repairs. Medium density.
Part No: 100917
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Putties, Sealers, Misc
Small kit for fiberglass repairsRepairs small fractures and punctures in fiberglass, metal (not aluminum), and most woods. No-run polyester gel formula adheres to vertical and overhead surfaces. Kit includes 48sq. in. of fiberglass cloth, 2oz. tube of polyester resin, 1½4oz. hardener, mixing sticks, squeegee, and instructions. Won’t cure underwater or when wet, so it’s not suitable for emergency repairs. 48sq. in. fiberglass cloth.
Part No: 108050
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Marine Surfacing Putty - Gallon
Versitile putty repairs scrapes, gouges, dings and dentsQuick, easy, permanent fiberglass, wood or metal repair. May be mixed with coloring agent. Formulation: Polyester putty Recommended Usage: Repairs to dents and scrapes in wood, fiberglass, stucco, cement, drywall and some metals Color: White, may be mixed with coloring agent to tint to desired shade. Recommended Usage: Repairs to dents and scrapes in wood, fiberglass, stucco, cement, drywall and some metals.
Part No: 105171
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Resin Coloring Agent
Match colors like a pro with these coloring agentsFor use with polyester or epoxy resins, fillers, or putties. These tints also work well with nonskid coatings. Use with West Marine Gel Coat or Evercoat Polyester Gel Paste.
Part No: 100505
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Resin Coloring Agent
Match colors like a pro with these coloring agentsFor use with polyester or epoxy resins, fillers, or putties. These tints also work well with nonskid coatings. Use with West Marine Gel Coat or Evercoat Polyester Gel Paste.
Part No: 100507
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Polyester Laminating Resin
Remains tacky for adhesion to fiberglass layupsRemains tacky. For multiple fiberglass layups and holding fiberglass on vertical surfaces during layup. Not for final coat. Catalyst included. Formulation: Polyester Laminating Resin. Recommended Usage: Laminating multiple layers of mat and cloth . Cure Time: 4 hours .
Part No: 100560
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass
Effective for metal cleaning, epoxies, vinyls, lacquers, solvent-based contact cement or adhesives, plastic and polyester resins and fiberglass.
Part No: 100582
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Putties, Sealers, Misc
This hardening agent can be used with West Marine and all other polyester fillers. White formula maintains color of filler to minimize priming. 4oz.
Part No: 101607
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Liquid Hardener for Polyester Surfacing Resin
A liquid methyl ethyl ketone-peroxide (MEK-P) hardener. For use with all polyester resin and gelcoat. . Graduated measure for mixing convenience.
Part No: 100603
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Premium Polyester Surfacing Resin
For the final coat—cures tack-freeFinal-coat polyester resin cures tack-free, regardless of exposure to air or previous resin coats. May be used over soft wood, fiberglass and metal. If more than one coat of this resin is applied, sanding is required between coats. Catalyst included. Formulation: Polyester surfacing resin. Recommended Usage: Final coat resin; cures when exposed to air . Cure Time: 4 hrs Recoat Time: 30 minutes.
Part No: 100552
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Putties, Sealers, Misc->Formula 27 Filler
Polyester filler for reliable dent, ding and gouge repairsQuality water-resistant, extra-white plastic filler for filling dents in wood, fiberglass and metal. Won’t sag. Includes hardener. Formulation: White polyester filler . Recommended Usage: Fills dents and scrapes in wood, fiberglass, stucco, cement, drywall and some metals. Color: White, may be mixed with coloring agent to tint to desired shade. Does not shrink after curing. Won't crack or pop out.
Part No: 100571
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Putties, Sealers, Misc
Excellent for creating icebox insulation Two-quart kit mixes in 1:1 ratio. Use for adding icebox or sound deadening insulation and additional flotation. Expands to 2cu. ft. or 25 times its volume. Create or add to existing flotation. Improve your ice boxes insulation.
Part No: 105612
|
|
|
|
Gelcoat paste for permanent gelcoat repairsNeutral color polyester paste for permanent gel coat marine repairs. Neatly covers gouges, scrapes and scratches in fiberglass. Use Evercoat coloring agents to create a color match. Hardener included. Pint. Neutral color formulated for use with Evercoat coloring agents (sold separately). Neatly fill gouges and scrapes.
Part No: 695PT
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Epoxy Resin
Easily touch up your gelcoat with this convenient kitEverything you need to make minor gelcoat repairs. Includes one ounce. premium gelcoat paste, six coloring agents, special release paper, hardener, mixing sticks, a blending chart, and instructions. Permanently repairs nicks, gouges, and scratches in gelcoat. Formulation: Polyester gelcoat paste and inert coloring agents. Includes brown, black, whicte, red, yellow, blue coloring agents, one ounce gelcoat paste, catalyst, mixing sticks.
Part No: 108000
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Gelcoat Repair Kits
Complete kit for a custom color matchYour complete solution for color-matching gelcoat and making minor repairs. Includes verything you need to make minor surface gelcoat repairs. Kit includes:1/4 pint of premium gelcoat paste. 1/4 oz. liquid hardener. six tubes of coloring agents (white, black, yellow, brown and blue). mixing cup & mixing sticks. release film. cleaning solvent.
Part No: 100668
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Resin Coloring Agent
Match colors like a pro with these coloring agentsFor use with polyester or epoxy resins, fillers, or putties. These tints also work well with nonskid coatings. Use with West Marine Gel Coat or Evercoat Polyester Gel Paste.
Part No: 100503
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Putties, Sealers, Misc->Formula 27 Filler
Polyester filler for reliable dent, ding and gouge repairsQuality water-resistant, extra-white plastic filler for filling dents in wood, fiberglass and metal. Won’t sag. Includes hardener. Formulation: White polyester filler . Recommended Usage: Fills dents and scrapes in wood, fiberglass, stucco, cement, drywall and some metals. Color: White, may be mixed with coloring agent to tint to desired shade. Does not shrink after curing. Won't crack or pop out.
Part No: 100570
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Gelcoat Repair Kits->Polyester Glazing Putty
Ultra-smooth surfacing putty can be applied over roughly sanded fiberglass, metal or filler surfaces.
Part No: 100400
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Polyester Resin->Premium Polyester Surfacing Resin
For the final coat—cures tack-freeFinal-coat polyester resin cures tack-free, regardless of exposure to air or previous resin coats. May be used over soft wood, fiberglass and metal. If more than one coat of this resin is applied, sanding is required between coats. Catalyst included. Formulation: Polyester surfacing resin. Recommended Usage: Final coat resin; cures when exposed to air . Cure Time: 4 hrs Recoat Time: 30 minutes.
Part No: 100553
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass
Use where full cure of unwaxed (laminating) gelcoat is desiredUsed to promote full cure of unwaxed (laminating) gelcoat and polyester resin. May also be used in lieu of mold release wax when working with polyester, gelcoat or epoxy resins.
Part No: 105685
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Marine Surfacing Putty - Gallon
Versitile putty repairs scrapes, gouges, dings and dentsQuick, easy, permanent fiberglass, wood or metal repair. May be mixed with coloring agent. Formulation: Polyester putty Recommended Usage: Repairs to dents and scrapes in wood, fiberglass, stucco, cement, drywall and some metals Color: White, may be mixed with coloring agent to tint to desired shade. Recommended Usage: Repairs to dents and scrapes in wood, fiberglass, stucco, cement, drywall and some metals.
Part No: 100574
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Skid-No-More Paint
Textured, skid-resistant acrylic latex coating for docks, ramps, steps or poolside. Excellent alternative to nonskid tape. Light gray color can be tinted using gel coat coloring agents. Easy-to-apply nonskid coating for deck or dock. Use in place of nonskid tape. Light gray color can be tinted using coloring agents.
Part No: 100854
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Polyester Resin->Premium Polyester Surfacing Resin
For the final coat—cures tack-freeFinal-coat polyester resin cures tack-free, regardless of exposure to air or previous resin coats. May be used over soft wood, fiberglass and metal. If more than one coat of this resin is applied, sanding is required between coats. Catalyst included. Formulation: Polyester surfacing resin. Recommended Usage: Final coat resin; cures when exposed to air . Cure Time: 4 hrs Recoat Time: 30 minutes.
Part No: 100554
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Resin Coloring Agent
Match colors like a pro with these coloring agentsFor use with polyester or epoxy resins, fillers, or putties. These tints also work well with nonskid coatings. Use with West Marine Gel Coat or Evercoat Polyester Gel Paste.
Part No: 100508
|
|
|