|
|
Cable Ties, Standard.
Part No: 351172
|
|
|
|
Tinned copper, nylon insulation for wire sizes 10GA thru 22GA.
Part No: 220110
|
|
|
|
Flexible nylon grommets prevent wires from abrading where they pass through bulkheads and panels.
Part No: 760625
|
|
![Circuit Breaker - 30 Amp, Red from ANCOR MARINE]( "Circuit Breaker - 30 Amp, Red from ANCOR MARINE")
|
|
Manufactured for use on either AC or DC current. These circuit breakers operate on the magnetic operating principle. They are temperature stable, and a trip-free mechanism does not allow breaker to be held with contacts closed during an overload. Choose red or white toggle Complete with standard pan head mounting screws Includes hard-to-find black finish SS flat head screws Dimensions.
Part No: 551630
|
|
|
|
For supporting wires between terminations so they don't fatigue or get in the way of other gear.
Part No: 401372
|
|
|
|
Electrical->Switches, Fuses & Accessories->Electrical Tools
Part No:
|
|
|
|
Ordinary automotive-type wire can suffer a loss of conductivity after a few months in the marine environment, caused by corrosion and/or vibration. Premium Ancor wire will provide a lasting solution for your sophisticated marine electronics and instruments to operate at peak potential.
Part No: 106810
|
|
|
|
These stainless steel padded clamps are suitable for supporting fuel lines, electrical looms and plumbing.
Part No: 403752
|
|
|
|
|
Ordinary automotive-type wire can suffer a loss of conductivity after a few months in the marine environment, caused by corrosion and/or vibration. Premium Ancor wire will provide a lasting solution for your sophisticated marine electronics and instruments to operate at peak potential.
Part No: 105010
|
|
|
|
Brass sleeve crimps onto wire for additional strain relief. Grooved barrel grips wire for superior holding power.
Part No: 220312
|
|
|
|
|
Brass sleeve crimps onto wire for additional strain relief. Grooved barrel grips wire for superior holding power.
Part No: 220322
|
|
|
|
These are the conventional metal and glass fuses that most electronics, fuse panels, and other devices use.
Part No: 601005
|
|
|
|
To reduce the chances of electrocution on board, we strongly recommend that your DC system use Safety Wire. The familiar red and black conductors have been changed to red and yellow conductors to reduce the chance of incorrectly connecting the AC hot (black) with the DC ground (black).
Part No: 124950
|
|
|
|
Ordinary automotive-type wire can suffer a loss of conductivity after a few months in the marine environment, caused by corrosion and/or vibration. Premium Ancor wire will provide a lasting solution for your sophisticated marine electronics and instruments to operate at peak potential.
Part No: 186003
|
|
|
|
Ancor's adhesive lined tubing is superior to conventional heat shrink tubing. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 302103
|
|
|
|
Ancor Heavy Duty Lugs are fully annealed with a flared end for easy wire insertion.
Part No: 252285
|
|
|
|
Electrical->Electrical Wire->Triplex Wire->Triplex Wire, assorted gauges - By the Foot
Premium Ancor wire will provide a lasting solution for your sophisticated marine electronics and instruments to operate at peak potential. Triplex wire has a white jacket over black, white and green conductors.
Part No: 131110
|
|
|
|
|
Ordinary automotive-type wire can suffer a loss of conductivity after a few months in the marine environment, caused by corrosion and/or vibration. Premium Ancor wire will provide a lasting solution for your sophisticated marine electronics and instruments to operate at peak potential.
Part No: 106510
|
|
|
|
|
Tinned copper, nylon insulation for wire sizes 10GA thru 22GA.
Part No: 230150
|
|
|
|
|
For supporting wires between terminations so they don't fatigue or get in the way of other gear.
Part No: 402182
|
|
|
|
|
For supporting wires between terminations so they don't fatigue or get in the way of other gear.
Part No: 401501
|
|
|
|
Electrical->Shore Power
Part No:
|
|
|
|
Bulb-LED Dbl Bay 20Wh 360Dg|Bulb-LED Dbl Bay 20Wh 360Dg
Part No: 529413
|
|
|
|
Keep spare bulbs handy in case of burnouts or breakage.
Part No: 521161
|
|
|
|
Direct replacement for incandescent festoon bulbs, with a fraction of the amperage.
Part No: 529207
|
|
|
|
|
Electrical->Switches, Fuses & Accessories->Replacement Bulbs->LED Festoon Bulbs
Direct replacement for incandescent festoon bulbs, with a fraction of the amperage.
Part No: 529209
|
|
|
|
|
Keep spare bulbs handy in case of burnouts or breakage.
Part No: 529408
|
|
|
|
Electrical->Switches, Fuses & Accessories->Halogen Bulbs
Marine Grade Halogen Bulbs Comprised of nickel plated brass bases for corrosion resistance and positive contact. Filaments have a rough service design allowing for hours of reliable burning.
Part No: 99W 529387
|
|
|
|
Electrical->Switches, Fuses & Accessories->LED Cluster Lamps
Bright diodes draw a miniscule 60mA. Single or double-contact bayonet sockets.
Part No: 529426
|
|
|
|
Electrical->Switches, Fuses & Accessories
Part No:
|
|
