Top Sellers
|
|
G4 BI-PIN Base, 24V, 10W, 0.42A, 11CP from ANCOR MARINE
Keep spare bulbs handy in case of burnouts or breakage.
|
|
|
Electric Bilge Pump Installation Kit from ANCOR MARINE
Essential items for installing a bilge pump Convenient package includes four #8 x 3/4" stainless-steel panhead screws, one 1-3/4" x 3/4" stainless steel hose clamp, and three 16-14AWG heat shrink butt connectors.
|
Swage Tool For Small Diam Wire from SEAFIT
Swage your own oval sleeves with this cadmium-plated steel tool. Pressure is transmitted to the copper sleeve by tightening two bolts on the tool with a socket wrench.
|
30 Amp Circuit Breaker with Black Toggle from ANCOR MARINE
Temperature, false-trip-free, AC/DC breakers For use with either AC or DC current. Magnetic circuit breakers are temperature-stable. A false-trip free mechanism prevents breaker from being held with contacts closed during overload. Switch Type: Toggle . Voltage Compatibility: AC, DC . Safety Features: Temperature stable, false-trip free. Housing Material: Plastic Housing . Dimensions: 2" x 1. 64" x . 75" . Terminal Type: Screw .
|
Series 250 Exhaust Hose, 2-3/8"ID, 2-3/4"OD, 230psi Burst Pressure from SHIELDS RUBBER
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
|
Series 250 Exhaust Hose, 7/8"ID, 1-3/16"OD, 565psi Burst Pressure from SHIELDS RUBBER
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
|
Fillet Spoon Knife 12 1/2" from WEST MARINE
West Marine's Fillet Knives have been developed with real anglers in mind. Highest-quality surgical stainless-blades are molded into non-slip rubberized soft grip handles for maximum sharpness, comfort and safety. Tang hilt protects your hand. Bright orange plastic boosts visibility in low-light conditions. The spoon model makes scraping out entrails and blood veins easy and mess-less.
|
Marine Silicone Sealant, Clear, 10oz. Tube from WEST MARINE
Use wherever a flexible, removable seal is required A specially-formulated marine silicone that won’t sag, shrink or turn yellow. Can be used above and below the waterline wherever a flexible, removable seal is required. Excellent for bedding deck fittings and hardware that you may want to remove at some time. Also good for insulating between dissimilar metals to prevent galvanic corrosion. Formulation: One-part silicone sealant . Bonds to non-oily woods, metal, fiberglass, glass, plastics .
|
2-5/8" x 1-1/2" Euro Utility Hinge from WEST MARINE
Stamped utility hinge with 1/2" offset from TACO. Made of marine grade 304 stainless steel with polished finish, non-corrosive utility hinge is ideal for hatches, cabinets, and doors inside and outside the boat. Measures 2-5/8" x 1-1/2" x .
|
Marine Color Vision Enamel Spray Paint - Flat Black, 12 oz. from MOELLER
Color matched to your engine’s original color Marine Color Vision is formulated for the marine environment. For use on all outboard & inboard engines, stern drive and lower unit applications. Quick-dry formula!. Oil & Gasoline Resistant. 12 oz.
|
711-M28 Marine Sanitation System from SEALAND
Marine Traveler Head Complete sanitation system in one self-contained package. China bowl provides the comforts of home. Freshwater operation and Teflon seal reduce odors. Efficient unit uses less than one quart of water per flush. Water level and flushing action controlled by a single foot pedal. One-piece holding tank has 9.
|
SE Sport 300 Hydrofoil, Black, 40 to 350HP Engine Capacity from SPORT MARINE TECHNOL
Especially good for deck boats and pontoon boats Adding this hydrofoil gives you a whole new level of control. Corner tighter, defeat cavitation and prop blow out. The patented sleek shape is rated the fastest hydrofoil plate in its class by independent testing. Narrow footprint translates to less resistance drag in the water for greater speed and lower rpm. Maintains top end speed smoothly and pops you out of the hole quicker. Turn a sluggish deck/pontoon boat into a sharp-turning machine.
|
Clamp-On Rod Holder - 1 1/4"ID Horizontal, Gold from WEST MARINE
Silver or gold tubes are anodized for long life in the marine environment. Fabricated from cold drawn aluminum with no unsightly weld seams. Available in aluminum schedule pipe sizes 3/4" thru 1 1/4" in horizontal and vertical models. If using stainless steel tube, please go down 1/4" in size. Type:Clamp on. # of Rods:One. Material:Aluminum. Lining:White vinyl. Diameter:Rod holder is 1 5/8" ID. Mount:Clamp on.
|
|
Black from ANCOR MARINE, Primary Wire by the Foot, 5, Pk) from ANCOR MARINE
|
|
Home -> Electrical -> Electrical Wire->Primary Wire, Mini Spools
Sophisticated marine electronics and instruments only operate at peak potential when supplied with power at the right voltage, and that necessitates high-quality wire. Ordinary automotive-type wire can suffer a loss of conductivity, caused by corrosion and/or vibration, after a few months in the marine environment. Finally, Ancor wire is based on AWG (American Wire Gauge) wire sizes, which are 6–12% larger than SAE gauge wire, so you get more current-carrying ability than from similar SAE wire.
Part No: 181003
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 302148
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 307124
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories -> Electrical Terminals->Waterproof Ring Terminals
A short length of adhesive shrink tubing creates a waterproof wire termination. Style: Ring . Conductor Material: Tinned Copper . Wire Attachment Method: Crimp tool and heat . Insulation Type: Nylon shrink .
Part No: 312603
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Spiral Wraps
Give your wire installations a clean, professional look. Easy to install. Black has UV inhibitor.
Part No: 452251
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories -> Wire Support/Heat Shrink->Stainless-Steel Cushion Clamps
304 stainless-steel padded clamps are suitable for supporting fuel lines, electrical looms and plumbing. The EDPM insulator is water-, fuel-, oil-, and acid-resistant.
Part No: 403312
|
|
|
|
Home -> Electrical -> Electrical Wire->Battery Cable, 25' Spools
Unlike welding cable or SAE wire, Ancor Marine Grade™ battery cables feature quality to last years. Tinned copper stranding for maximum protection against corrosion and electrolysis Ultra flexible (type 3) stranding resists fatigue due to vibration and flexing Premium vinyl insulation that resist salt water, battery acid, oil, gas and UV Rated at 600V and 105° C Heavy duty insulation, resistant to heat and abrasion Exceeds all UL 1426, USCG Charterboart (CFR Title 46), CSA and ABYC standards.
Part No: 113502
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Halogen Replacement Lamps
Keep spare bulbs handy in case of burnouts or breakage.
Part No: 529362
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->GMA Marine Fuses
Fast-acting, corrosion resistant fuses open quickly to protect circuits from overloads and shortcircuits Time-delayed to allow temporary, harmless in-rush currents to pass but open on sustained overloads and short-circuits Each fuse tested twice to ensure highest quality Available in sizes to fit every need.
Part No: 605020
|
|
|
|
Temperature, false-trip-free, AC/DC breakers For use with either AC or DC current. Magnetic circuit breakers are temperature-stable. A false-trip free mechanism prevents breaker from being held with contacts closed during overload. Switch Type: Toggle . Voltage Compatibility: AC, DC . Safety Features: Temperature stable, false-trip free. Housing Material: Plastic Housing . Dimensions: 2" x 1. 64" x . 75" . Terminal Type: Screw .
Part No: 551715
|
|
|
|
Home -> Electrical -> Electrical Wire->Primary Wire by the Spool
Ordinary automotive-type wire can suffer a loss of conductivity after a few months in the marine environment, caused by corrosion and/or vibration. Premium Ancor wire will provide a lasting solution for your sophisticated marine electronics and instruments to operate at peak potential. 600V . 105°C dry, 75°C wet . Rated for oily and wet environments . Type 3 stranded, with 5–10 times more copper strands than Type 2 . Marine UL-listed, and meets the highest ABYC standards for AC or DC use .
Part No: 104310
|
|
|
|
Home -> Electrical -> Electrical Wire->Primary Wire by the Spool
Ordinary automotive-type wire can suffer a loss of conductivity after a few months in the marine environment, caused by corrosion and/or vibration. Premium Ancor wire will provide a lasting solution for your sophisticated marine electronics and instruments to operate at peak potential. 600V . 105°C dry, 75°C wet . Rated for oily and wet environments . Type 3 stranded, with 5–10 times more copper strands than Type 2 . Marine UL-listed, and meets the highest ABYC standards for AC or DC use .
Part No: 104110
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories -> Electrical Terminals->Heavy-Duty Lugs
Tin-plated finish and fully annealed. Made of high-grade electrolytic copper with a flared end for easy wire insertion and seamless construction. AWG identification. Style: Lug . Conductor Material: Tinned Copper . Wire Attachment Method: hand or auto crimp tool .
Part No: 242295
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Mini Lamps
.
Part No: 529200
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Nylon-Insulated Ring Terminals with Insulation Grip
Corrosion-resistant tinned copper with brass sleeve for insulation grip and funnel entry for easy wire insertion. Style: Ring . Conductor Material: Tinned Copper . Wire Attachment Method: Hand or auto-crimp tool . Insulation Type: Nylon .
Part No: 220214
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Nylon Grommets
Flexible nylon grommets prevent wires from abrading where they pass through bulkheads and panels.
Part No: 760312
|
|
|
|
Home -> Electrical -> Electrical Wire -> Duplex Wire->Duplex Wire by the Foot
White jacket over a black and a red conductor. Wire Type: Duplex . Construction: Tinned Copper . Conductors: One Black, One Red . Color of Exterior Insulation: White .
Part No: 120910
|
|
|
|
Home -> Electrical -> Electrical Wire -> Battery Cable->Battery Cable
Ultra flexible Type 3 stranding resists fatigue due to vibration and flexing Premium vinyl insulation that resists salt water, battery acid, oil, gas and UV Rated at 600V and 105 degrees C Heavy duty insulation, resistant to heat and abrasion Exceeds all UL 1426, USCG Charterboart (CFR Title 46) and ABYC standards Sold by the foot up to 50' or 100' standard pack, as indicated .
Part No: 116505
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 301103
|
|
|
|
Home -> Electrical -> Electrical Wire->Primary Wire by the Spool
Ordinary automotive-type wire can suffer a loss of conductivity after a few months in the marine environment, caused by corrosion and/or vibration. Premium Ancor wire will provide a lasting solution for your sophisticated marine electronics and instruments to operate at peak potential. 600V . 105°C dry, 75°C wet . Rated for oily and wet environments . Type 3 stranded, with 5–10 times more copper strands than Type 2 . Marine UL-listed, and meets the highest ABYC standards for AC or DC use .
Part No: 104410
|
|
|
|
Home -> Electrical -> Electrical Wire->Primary Wire by the Foot
Sophisticated marine electronics and instruments only operate at peak potential when supplied with power at the right voltage, and that necessitates high-quality wire. Ordinary automotive-type wire can suffer a loss of conductivity, caused by corrosion and/or vibration, after a few months in the marine environment. Finally, Ancor wire is based on AWG (American Wire Gauge) wire sizes, which are 6–12% larger than SAE gauge wire, so you get more current-carrying ability than from similar SAE wire.
Part No: 108110
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Vinyl Butt Connectors
Tinned copper, vinyl insulation. Style: Butt . Conductor Material: Tinned copper . Wire Attachment Method: Hand or auto crimp tool . Insulation Type: Vinly .
Part No: 230140
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories -> Electrical Terminals->Nylon-Insulated Ring Terminals with Funnel Entry
Corrosion-resistant tinned copper with brass sleeve for insulation grip and funnel entry for easy wire insertion. Style: Ring . Conductor Material: Tinned Copper . Wire Attachment Method: Hand or auto-crimp tool . Insulation Type: Nylon .
Part No: 230237
|
|
|
|
Home -> Electrical -> Electrical Wire->Primary Wire, Mini Spools
Sophisticated marine electronics and instruments only operate at peak potential when supplied with power at the right voltage, and that necessitates high-quality wire. Ordinary automotive-type wire can suffer a loss of conductivity, caused by corrosion and/or vibration, after a few months in the marine environment. Finally, Ancor wire is based on AWG (American Wire Gauge) wire sizes, which are 6–12% larger than SAE gauge wire, so you get more current-carrying ability than from similar SAE wire.
Part No: 182003
|
|
|
|
Home -> Electrical -> Electrical Wire->Primary Wire by the Foot
Sophisticated marine electronics and instruments only operate at peak potential when supplied with power at the right voltage, and that necessitates high-quality wire. Ordinary automotive-type wire can suffer a loss of conductivity, caused by corrosion and/or vibration, after a few months in the marine environment. Finally, Ancor wire is based on AWG (American Wire Gauge) wire sizes, which are 6–12% larger than SAE gauge wire, so you get more current-carrying ability than from similar SAE wire.
Part No: 111010
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Halogen Replacement Lamps
Keep spare bulbs handy in case of burnouts or breakage.
Part No: 529367
|
|
|
|
Home -> Electrical -> Interior Lighting->Standard Screw-Base Lamps
Sold in pairs Heavy-duty glass envelope for break resistance Nickel-plated brass bases prevent corrosion while insuring a positive pointof-contact Filaments, withrough service design, permit hours of reliable burning Available in various configurations, tested for dependability.
Part No: 531050
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Halogen Replacement Lamps
Keep spare bulbs handy in case of burnouts or breakage.
Part No: 521125
|
|
|
|
Home -> Electrical -> Meters & Distribution
Checks for live circuits, broken wires, blow fuses and defective sockets on boats and motor vehicles. Includes 30" ground wire.
Part No: 702082
|
|
|
|
Home -> Electrical -> Batteries & Accessories->Premium Battery Cable Assemblies
Premium 4AWG Battery Cable Assemblies: Marine-grade heavy-duty cables are pre-assembled with tinned copper lugs and adhesive-lined heat shrink tubing. Ready-to-use cables are acid/oil/moisture/corrosion-resistant. For continuous current draws up to 136A.
Part No: 189136
|
|
|