Top Sellers
Teak Plugs - 3/8" from SEAFIT
Use these teak plugs to cover screw heads or fill small holes for a beautiful smooth finish to your installation. Sizes: 1/4" 5/8" 5/16" 3/8" 1/2" 1".
|
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
12V Blaster Washdown Pump, 3.5 GPM from SHURFLO
Blast the grimiest decks clean with one of these durable freshwater/saltwater pumps. Positive-displacement three/four chamber diaphragm design is self-priming up to 6' and can run dry without damage. Include 3/4" and 5/8" garden hose adapters. Pro Blaster features higher capacity and a seamless motor shell for enhanced protection in saltwater environments. Suitable for mounting in wet locations. Include fittings and Blaster spray nozzle. Switch Type: Sealed 45psi pressure switch .
|
Sanding Discs - 5" Velcro-Backed, 40-Grit, 5 Pack from 3M PRODUCTS
Convenient hook and loop disk attachmentAdapts a 1/4” or 3/8” electric drill so it may be used as a 5” disc sander. Includes three Velcro-backed sanding discs (120-, 80- and 40-grit). Recommended Usage: Sanding fiberglass/gelcoat, paint, wood and metal. Abrasive Material: Aluminum oxide. Backing Type: Hook and loop . Disc Size: 5" disc .
|
PE-1 Lexan Mast Pad Eye from FORESPAR
For use on our small poles. 1-3/4"H x 1-1/4" x 5/8"dia. ring. Same ring as supplied with 4-8 and 6-12 poles.
|
|
|
Nova Lift™ from FORESPAR
Forespar's Nova Lift products combine elegant styling with superb strength and function. Other brands swing left and right without control. Nova Lift comes with a stainless-steel lower mounting tube that will accommodate 30" height rails. Vessels with rails higher than 30" will require the use of a deck pad (not included) to raise the installation to the proper height. The Nova Lift with Winch is ideal for trawlers and motor yachts where sailboat winches are not available. 220 lbs.
|
Marelon Intake Scoop Strainer, 1-1/4" Max. Thru-Hull Si from FORESPAR
Made of durable composite material and engineered to exceed ABYC and ISO standards.
|
Ring Style Car RC-125 from FORESPAR
Separates the up/down and side-to-side motions of the pole to make a bind-free, strong attachment. Shackles are supplied for uphaul/downhaul lines. Stainless steel cheeks, aluminum body and plastic liners. Ring Style Car RC-125 Although a screw-pin stop is supplied, this car is designed to be used with uphaul/downhaul blocks shackled to the bails at each end. Ring ID: 1 5/8". Investment cast stainless steel with plastic liners to reduce friction. Fits UXP and UTR pole end fittings.
|
|
|
Motor Mate Lifting Davit from FORESPAR
The unit stores in its own 31" (787. Comes with tackle and will lift anything from the dinghy to the cockpit (or vice-versa) up to 100 lbs. Great for the dinghy motor, but also good for scuba tanks, ice, duffel bags, groceries, etc. The Motor Mate uses a Railfast® mounted ring on the rail and a "toe" on the cockpit coaming directly under the rail. Lightweight, portable, compact . Ideal for lifting outboard motors, sea bags, scuba gear . Lifting capacity: 100 lbs.
|
Vented Loop Cap, Marelon from FORESPAR
Loop Cap Replacement for marelon vented loops.
|
ADJ 7-15-DL Whisker Pole, 83"/9lb. Collapsed Length/Weight, 202" Max. Working Length, 2" Tubing Diameters from FORESPAR
These telescoping whisker poles are heavy-duty two-section and three-section aluminum spars which can be extended to lengths up to 17' and securely locked in position by an internal twist lock device. Poles feature self-latching Ultra Series™ fittings on the inboard and outboard ends. Aluminum tubing. End Fitting Inboard: UPX. End Fitting Outboard: UPX.
|
Nova Davit Dinghy Lift from FORESPAR
Longer reaching arms use strong, lightweight Marelon components The Nova Davit system represents the "State of the Art" for styling and function. Like all Nova products, a very high-standard finish will make the right statement about your boat. The neat folding feature stows the davit system flush with your boat's stern. The maximum safe working load is 300 lbs. Nova Davit conveniently folds inward to maintain boat slip length or remove them completely for stowage or racing.
|
1/4" NPT X 3/8" Brass hose barb from MOELLER
1/4 NPT X 3/8" Brass Hose barbs with male threads.
|
|
from FORESPAR, 4" from FORESPAR, 4") from FORESPAR, 8" from FORESPAR
|
|
Home -> Plumbing -> Fittings & Valves->Marelon Ball Valves & Tailpieces
A. Marelon Ball Valves - High-strength, lightweight glass-reinforced Marelon. After 11,000 duty cycles, they still hold 80psi of air leak-free. B. MarelonTailpieces - Hose barbs on one end. NPS pipe threads on the other. C.
Part No: 905007
|
|
|
|
Home -> Plumbing -> Fittings & Valves -> Valves, Deck Fills, Misc.->Marelon Vented Loops
Made of corrosion-resistant composite material and engineered to exceed ABYC and ISO standards.
Part No: 903001
|
|
|
|
Home -> Sailboat -> Downwind Poles & Cars -> Pole End Fittings & Tub->Deck Mount Pole Chocks
Constructed of marelon, these chocks withstand rugged use and offer a “snag-proof” profile on deck.
Part No: 300002
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Marelon Cockpit Drains
Made of durable composite material that requires no bonding or protection from electrolysis. Engineered to exceed ABYC and ISO standards. Flush-head construction.
Part No: 906037
|
|
|
|
Home -> Plumbing -> Freshwater Systems->Sink Drain Fittings
null.
Part No: 907017
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting
Masthead light light meets USCG requirements for boats to 65'. Mounts on the forward part of the mast. Features separate switching. 10W bow light draws 0. 8A and is easily replaceable. Includes 6" triple-lead wire. Molded black housing. 5-3/4"H.
Part No: 132000
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Marelon Ball Valves & Tailpieces
A. Marelon Ball Valves - High-strength, lightweight glass-reinforced Marelon. After 11,000 duty cycles, they still hold 80psi of air leak-free. B. MarelonTailpieces - Hose barbs on one end. NPS pipe threads on the other. C.
Part No: 905101
|
|
|
|
Home -> Sailboat -> Downwind Poles & Cars
Forespar UXP-150-EF External Trip Ultra Series Ends This is the cutting edge in spinnaker pole end fitting technology. Designed for high strength, very low weight and resistance to wear and corrosion the Ultra Series composite end fitting is perfect for aluminum or carbon fiber spinnaker poles and whisker poles. The Ultra Series is the sailor's choice for inshore and offshore racing and cruising. Available with or without triggers. Maximum recommended boat LOA is 43'. Tube I. 370" .
Part No: 304054
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Spinnaker Shackle Guards
Place a protective buffer between the spinnaker pole ends and your after-guy shackle. Shackle guards can also be used on lifelines to help skirt genoas. High strength polyethylene. UV inhibited for long life.
Part No: 300086
|
|
|
|
Home -> Cordage -> Rigging Products
Help your crew learn the ropes with these labels Label cleats and winches for organization and safety.
Part No: 100014
|
|
|
|
Wide, flared throat and a spring-loaded piston system with roller for positive lock and release. Aluminum, with stainless pin. Requires internal trip line Length: 7" Weight: 54oz Fits: 3. 5" diameter tubes with internal diameter of 3.
Part No: 309033
|
|
|
|
Home -> Plumbing -> Freshwater Systems->Sink Drain Fittings
2" Straight, 1-1/2" NPT, Plastic.
Part No: 907015
|
|
|
|
Home -> Sailboat -> Tiller & Rudder->Tiller Clips
Tiller Clips Molded of Marelon® for exceptional strength.
Part No: 941021
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Marelon fuel-tank vent simply pushes in to a 3/4'' installation hole and automatically locks in place. Accepts 5/8'' I. D. hose. Corrosion-proof, and has no plating to chip off.
Part No: 907029
|
|
|
|
Home -> Sailboat -> Downwind Poles & Cars->End Repair Kits
Adjustable end repair kits.
Part No: 300026
|
|
|
|
Home -> Sailboat -> Downwind Poles & Cars -> Pole End Fittings & Tub->Ultra Series Spinnaker Pole Ends
Lightweight and durable, these composite fittings weigh significantly less than metal fittings. Available with either external or internal trip. Included trip line is lightweight Spectra. All lengths to fit standard poles.
Part No: 304062
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Tillers Extensions & Ac->Giant Stick Tiller Extensions
"Fat 1 ¼" diameter extension allows you to use a light grip for great feel and so your hand doesn’t get fatigued. 48" length is great both for the Laser and U20 sportboat. " Exceptional holding power in a super lightweight blockThe Series 60 is a good choice for Lasers and mainsheets on dinghies, Series 75 is sized for mainsheets on larger, powerful dinghies, skiffs and sportboats of all sizes, or for asymmetrical spinnaker sheets. Machined cheeks and sheave.
Part No: 102226
|
|
|
|
Home -> Sailboat -> Downwind Poles & Cars->Twist-Lock Pole Repair Kits
Contains all parts to recondition twist-lock telescoping poles, and complete instructions.
Part No: 400008
|
|
|
|
Home -> Interior, Flags & Gifts -> Flags & Staffs -> Code/Official Flags
Shows all official U. S. Sailing flag designations for before and during a race. Includes descriptions of sound signals and reciprocal headings around the perimeter. Permanent—won't fade or discolor.
Part No: 100017
|
|
|
|
Home -> Sailboat -> Downwind Poles & Cars
This product represents the cutting edge in spinnaker pole end fitting technology. Designed for high strength, very low weight and resistance to wear and corrosion the Ultra Series composite end fitting is perfect for aluminum or carbon fiber spinnaker poles and whisker poles. It is identical to the "UXP" piston style end fitting with the added feature of an internal trigger which makes it ideal for racing and use on carbon poles. Features: An internal trip. 5" pole.
Part No: 304061
|
|
|
|
Home -> Sailboat -> Downwind Poles & Cars->Ultra Series™ GPS Spinnaker Pole End Fittings
This deluxe ocean-racing end fitting features a wide flared throat and spring-loaded piston system with roller for positive lock and release.
Part No: 304021
|
|
|
|
Home -> Sailboat -> Downwind Poles & Cars->Line Control Whisker Poles
Line Control Whisker Poles Forespar manufactures the finest and most complete selection of whisker poles. Built from heavy-gauge anodized aluminum, high-modulus carbon fiber, or combining an aluminum outer tube with a carbon inner pole, with either Line Control or Twist Lock telescoping systems. It is not necessary to go forward to adjust buttons of any kindsimply uncleat the line to extend or retract.
Part No: 800801
|
|
|
|
Home -> Sailboat -> Downwind Poles & Cars->Line Control Whisker Poles
Line Control Whisker Poles Forespar manufactures the finest and most complete selection of whisker poles. Built from heavy-gauge anodized aluminum, high-modulus carbon fiber, or combining an aluminum outer tube with a carbon inner pole, with either Line Control or Twist Lock telescoping systems. It is not necessary to go forward to adjust buttons of any kindsimply uncleat the line to extend or retract.
Part No: 800800
|
|
|
|
Home -> Sailboat -> Downwind Poles & Cars -> Pole End Fittings & Tub->Deck Mount Pole Chocks
Constructed of marelon, these chocks withstand rugged use and offer a “snag-proof” profile on deck.
Part No: 300013
|
|
|
|
Home -> Engine Systems -> Motor Mounts
Cargo Mate,™ the Big Brother to Motor Mate™ This heavy duty white power coated aluminum heavy lifter mounts and dismounts with ease. Winch drum capacity provides for 13 vertical feet of lift. With greater lift capacity, the unit should be thru-deck mounted on sailboats and coaming or transom/swim step mounted on power boats. 19mm) column extensions available. Lifting capacity: 250 lbs. Integral ratchet type winch provides 15 to 1 lift ratio . For both power and sail . Boom length: 34” (863.
Part No: 153200
|
|
|
|
Home -> Sailboat -> Downwind Poles & Cars
Built from heavy-gauge anodized aluminum, high-modulus carbon fiber, or combining an aluminum outer tube with a carbon inner pole, with either Line Control or Twist Lock telescoping systems. Line Control Whisker Poles - The Forespar Line Control system makes extending and retracting whisker poles quick and easy. It is not necessary to go forward to adjust buttons of any kind - simply un-cleat the line to extend or retract.
Part No: 304018
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Marelon Diverter Valves
Made of durable, corrosion-resistant composite material that is not subject to electrolysis, this valve is engineered to exceed ABYC and ISO standards. 120° movement operates valve. Positive stops between positions. 1-1/2"W x 3-1/4"H.
Part No: 902007
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Marelon Diverter Valves
Made of durable, corrosion-resistant composite material that is not subject to electrolysis, this valve is engineered to exceed ABYC and ISO standards. 120° movement operates valve. Positive stops between positions. 1-1/2"W x 3-1/4"H.
Part No: 902008
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting
Stainless-steel chafe guard for ML-2 keeps lines from snagging while protecting fittings.
Part No: 132200
|
|
|
|
Home -> Engine Systems -> Motor Mounts->Nova Lift™
Forespar's Nova Lift products combine elegant styling with superb strength and function. Other brands swing left and right without control. Nova Lift comes with a stainless-steel lower mounting tube that will accommodate 30" height rails. Vessels with rails higher than 30" will require the use of a deck pad (not included) to raise the installation to the proper height. The Nova Lift with Winch is ideal for trawlers and motor yachts where sailboat winches are not available. 220 lbs.
Part No: 153312
|
|
|