Welcome! Please Sign-In
Top Sellers
Whipping Twine, Green, #4 Med. (0.8mm), 295'L from FSE ROBLINE
Whipping Twine, Green, #4 Med. (0.8mm), 295'L from FSE ROBLINE
Whipping Twine Add a finishing touch to your lines. Use this waxed polyester thread for spliced eyes, whipping or as a seizing line. Easy to use plastic spool . Available in 5 colors .
1/4" - 5/16" Anchor connector from WEST MARINE
1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.
45lb. CQR Anchor, Boats 32'–58', 40-5/8"L x 14"W x 17"H from LEWMAR
45lb. CQR Anchor, Boats 32'–58', 40-5/8"L x 14"W x 17"H from LEWMAR
The legendary Lewmar plow anchor stays put, won't breakA favorite among bluewater cruisers for its strength and performance in a wide range of bottom conditions. Excellent penetration in sand, weeds, rocks and mud. Trouble-free anchor roller stowage. Attach a trip line to the eye on the horn for easy break-out. Hinged shank prevents breakout during wind shifts. Forged steel construction. Lifetime warranty against breakage. Material: Galvanized Steel . Application: Sand, Rock and Grass .
Chrome Sand Spike Anchor from MARINETECH PRODUCTS
Chrome Sand Spike Anchor from MARINETECH PRODUCTS
An alternative to more expensive beach and land anchoring devicessimply push this rod into the ground, or use a hammer in firmer soils and attach an anchor line to the attachment loop.
Rail Mount Anchor Bracket, Horizontal from WINDLINE
Rail Mount Anchor Bracket, Horizontal from WINDLINE
Stow your anchor up off the deck, ready for instant deployment. These brackets hold fluke-style Danforth, West Marine, U. S. anchors up to 35lb. and all Fortress anchors (except those with mud palms).
Box Anchor, Small, Offshore Boat to 18'–30', Cabin Cruiser to 24', 19lb., 22"H x 8.5"L x 5"W Collapsed, Stainless from SLIDE ANCHOR
Box Anchor, Small, Offshore Boat to 18'–30', Cabin Cruiser to 24', 19lb., 22"H x 8.5"L x 5"W Collapsed, Stainless from SLIDE ANCHOR
Recommended for protected waters or beach use, this anchor’s unique shape enables it to set in most bottom types with half the rode normally needed for conventional anchors. Its fixed scoop design and narrow side panels set like a “cookie cutter” into sand, mud, grass or rock. A stabilizing bar and spring make it easy to lock the anchor open for use or collapse it for storage. Stainless-steel version is cast and polished 304 stainless. Style: Box . Material: Galvanized steel/stainless steel.
Box Anchor, Large, Offshore Boat to 40', Cabin Cruiser to 32', 25lb., 25"H x 9.5"L x 5.5"W Collapsed, Stainless from SLIDE ANCHOR
Box Anchor, Large, Offshore Boat to 40', Cabin Cruiser to 32', 25lb., 25"H x 9.5"L x 5.5"W Collapsed, Stainless from SLIDE ANCHOR
Recommended for protected waters or beach use, this anchor’s unique shape enables it to set in most bottom types with half the rode normally needed for conventional anchors. Its fixed scoop design and narrow side panels set like a “cookie cutter” into sand, mud, grass or rock. A stabilizing bar and spring make it easy to lock the anchor open for use or collapse it for storage. Stainless-steel version is cast and polished 304 stainless. Style: Box . Material: Galvanized steel/stainless steel.
Danik Anchor Hook from SLIDE ANCHOR
Danik Anchor Hook from SLIDE ANCHOR
Perfect for attachment to a bow eye or sand spike, this combo carabiner/ cam cleat eliminates the periodic hassle of correcting and retying your beach or anchor line. Just pass the line through the cam cleat and pull tight. Made of 304 stainless steel. For boats to 6,000lb. that anchor in protected waters. For use with 3/8"-5/8" line, sold separately. Holds up to 8,000lb.
Swivel Anchor Connector, 5/16"–7/16" Chain, 2750lb. SWL from WEST MARINE
Swivel Anchor Connector, 5/16"–7/16" Chain, 2750lb. SWL from WEST MARINE
18-8 stainless swivel connectors prevent snagging at the anchor/chain connection, slide easily over anchor rollers and prevent the chain from becoming twisted while the anchor is set. Attach with a single set screw (using the Allen wrench included).
Large Anchor & Rode Bag from WEST MARINE
Large Anchor & Rode Bag from WEST MARINE
Anchor Bag Durable mesh bag provides a convenient and tangle-free place to store your anchor rode. A number of features add to the life of your rode and make it easier to deploy. The wide mouth is held open with an internal stainless steel ring, but closes easily with a drawstring. . Mesh ends dry quickly and a reinforced slit in the bottom allows the bitter end to be passed outside the bag for securing. Brass boat snap allows you to hang the bag and rode where they’re most convenient.
30lb. River Anchor from GREENFIELD PRODUCTS
30lb. River Anchor from GREENFIELD PRODUCTS
Combines the features of a traditional mushroom anchor with flukes for better bottom penetration. PVC coating is easy to clean and won’t scuff your boat. Recommended for use in protected inland waters only.
100' Anchor Rode from MARINETECH PRODUCTS
100' Anchor Rode from MARINETECH PRODUCTS
These super flexible nylon anchor lines are designed for trailerable watercraft up to 26'.
PVC Coated Chain, Red, 1/4" x 4' from GREENFIELD PRODUCTS
PVC Coated Chain, Red, 1/4" x 4' from GREENFIELD PRODUCTS
Galvanized, proof-coil anchor chain is PVC coated to protect boat surfaces. Specially formulated PVC offers excellent flexibility and durability.
Stainless-Steel Horizon™ Claw Anchors 11lb. 15'-25' from LEWMAR
Stainless-Steel Horizon™ Claw Anchors 11lb. 15'-25' from LEWMAR
Made of precision-cast 316 stainless steel, these claw anchors are patterned after anchors developed to secure oil rigs in the North Sea. Extremely effective in a variety of sea beds, tides, and wind conditions. Reset fast if they become dislodged due to changing conditions. Stows conveniently on the bow roller of most boats.
Anchor Buddy Mooring Line, Blue from GREENFIELD PRODUCTS
Anchor Buddy Mooring Line, Blue from GREENFIELD PRODUCTS
The anchor rope that stretches Rope-covered bungee cord stretches from 14' to 50'. Anchor with Anchor Buddy, drive to shore, tie up boat securely to land and let the Anchor Buddy stretch cord pull it back out from shore for safe moorage.

Anchor from FORTRESS ANCHORS, 8mm), (0, #4 Med, Red from FSE ROBLINE

Stowaway Bag for 4lb. Anchor from FORTRESS ANCHORS Home -> Anchor & Docking -> Anchors -> Anchor Chocks & Accessories->Stowaway Anchor Bags
Rugged Cordura bags with Velcro fasteners are built to survive tough, regular use. Fit Fortress or Guardian anchors. Holds an anchor and 6' of chain (sold separately).
Part No: SFX-7
Stowaway Bag for 15lb. Anchor from FORTRESS ANCHORS Home -> Anchor & Docking -> Anchors -> Anchor Chocks & Accessories->Stowaway Anchor Bags
Rugged Cordura bags with Velcro fasteners are built to survive tough, regular use. Fit Fortress or Guardian anchors. Holds an anchor and 6' of chain (sold separately).
Part No: SFX-23
21lb. Aluminum Anchor for 46–51' Boat, Replaces 33–50lb. Steel Anchor, 40"L x 32"W Stock, 24" Fluke Length from FORTRESS ANCHORS Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Fortress Aluminum Anchors
Lightweight, fast-setting and reliable, this anchor gets fan mail Fortress anchors let you choose between two shank angles to provide outstanding holding power in two common seabed types—a 32° angle for sand, or a 45° angle for soft mud. Precisely machined interlocking components made from high tensile aluminum-magnesium alloy have no welds to weaken the metal. The alloy is extremely strong, corrosion-resistant, nonmagnetic and light. Style: Pivoting aluminum fluke .
Part No: FX-37
Commando Anchor Kit from FORTRESS ANCHORS Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors
The complete anchoring system for boats to 16'. Includes a 2. 5-lb. Guardian anchor, 150' of 1/4'' three-strand nylon line, 6' of 3/16'' high tensile galvanized steel chain, a 1/4'' galvanized shackle, and a Kevlar Cordura® bag. Anchor has wing nuts and bolts for assembly/disassembly without tools.
Part No: C5-A
69lb. Aluminum Anchor for 69'+ Boat, Replaces 100–170lb. Steel Anchor, 56"L x 45"W Stock, 33" Fluke Length from FORTRESS ANCHORS Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Fortress Aluminum Anchors
Lightweight, fast-setting and reliable, this anchor gets fan mail Fortress anchors let you choose between two shank angles to provide outstanding holding power in two common seabed types—a 32° angle for sand, or a 45° angle for soft mud. Precisely machined interlocking components made from high tensile aluminum-magnesium alloy have no welds to weaken the metal. The alloy is extremely strong, corrosion-resistant, nonmagnetic and light. Style: Pivoting aluminum fluke .
Part No: FX-125
15lb. Aluminum Anchor for 39–45' Boat, Replaces 19–28lb. Steel Anchor, 36"L x 29"W Stock, 21" Fluke Length from FORTRESS ANCHORS Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Fortress Aluminum Anchors
Lightweight, fast-setting and reliable, this anchor gets fan mail Fortress anchors let you choose between two shank angles to provide outstanding holding power in two common seabed types—a 32° angle for sand, or a 45° angle for soft mud. Precisely machined interlocking components made from high tensile aluminum-magnesium alloy have no welds to weaken the metal. The alloy is extremely strong, corrosion-resistant, nonmagnetic and light. Style: Pivoting aluminum fluke .
Part No: FX-23
7lb. Aluminum Anchor for 28–32' Boat, Replaces 10–13lb. Steel Anchor, 27"L x 22"W Stock, 16" Fluke Length from FORTRESS ANCHORS Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Fortress Aluminum Anchors
Lightweight, fast-setting and reliable, this anchor gets fan mail Fortress anchors let you choose between two shank angles to provide outstanding holding power in two common seabed types—a 32° angle for sand, or a 45° angle for soft mud. Precisely machined interlocking components made from high tensile aluminum-magnesium alloy have no welds to weaken the metal. The alloy is extremely strong, corrosion-resistant, nonmagnetic and light. Style: Pivoting aluminum fluke .
Part No: FX-11
Stowaway Bag for 47lb. Anchor from FORTRESS ANCHORS Home -> Anchor & Docking -> Anchors -> Anchor Chocks & Accessories->Stowaway Anchor Bags
Rugged Cordura bags with Velcro fasteners are built to survive tough, regular use. Fit Fortress or Guardian anchors. Holds an anchor and 6' of chain (sold separately).
Part No: SFX85
Guardian Anchor 65lb for Boats 63-72' from FORTRESS ANCHORS Home -> Anchor & Docking -> Anchors -> Basic Pivoting Fluke Anchors->Guardian Aluminum Anchors
An easy-to-handle alternative to heavy steel anchors, Guardians feature lightweight, corrosion-resistant, aluminum-magnesium construction and a precise 32° fluke angle. Components are not anodized and are slightly smaller. But just like the Fortress, the weldless design maximizes strength and they easily disassemble for compact storage or parts replacement. Style: Pivoting aluminum fluke . Material: High tensile aluminum-magnesium alloy . Application: Sand and mud .
Part No: G-125
Stowaway Bag for 69lb. Anchor from FORTRESS ANCHORS Home -> Anchor & Docking -> Anchors -> Anchor Chocks & Accessories->Stowaway Anchor Bags
Rugged Cordura bags with Velcro fasteners are built to survive tough, regular use. Fit Fortress or Guardian anchors. Holds an anchor and 6' of chain (sold separately).
Part No: SFX-125
Guardian Anchor 42lb for Boats 54-62' from FORTRESS ANCHORS Home -> Anchor & Docking -> Anchors -> Basic Pivoting Fluke Anchors->Guardian Aluminum Anchors
An easy-to-handle alternative to heavy steel anchors, Guardians feature lightweight, corrosion-resistant, aluminum-magnesium construction and a precise 32° fluke angle. Components are not anodized and are slightly smaller. But just like the Fortress, the weldless design maximizes strength and they easily disassemble for compact storage or parts replacement. Style: Pivoting aluminum fluke . Material: High tensile aluminum-magnesium alloy . Application: Sand and mud .
Part No: G-85
Accusharp Easy Knife Sharpener from FORTUNE PRODUCTS Home -> Interior, Flags & Gifts -> Knives & Pocket Tools
For faster, safer cutting, keep knives sharp In the galley or on the deck, dull knives are worse than useless—they're dangerous. This Accusharp tool can sharpen any blade in just 10 seconds. Simply place the knife on a table top and give the AccuSharp a half-dozen quick strokes along the blade—it's safe and easy, no special skill required. The sharpening is done by diamond-honed tungsten carbide tough enough to hone even hardened steel. 2 1/2"W x 5"L x 3/4" D.
Part No: 1117-0001
Frabill 1264 Pinfish Trap, Black from FRABILL INC. Home -> Fishing -> Fishing Accessories
1264 Black Pinfish Trap 18x12 x 8 . Flat Bottom. Heavy-duty vinyl dipped steel mesh.
Part No: 1264
Fram P3645 from FRAM Home -> Engine Systems -> Engine Parts->Fram P1103A
Fram lube and fuel filters have been setting industry standards since 1934 and are engineered for long life and maximum efficiency. They remove harmful suspended contaminants without filtering detergent additives. All Fram filters meet or exceed all engine manufacturers; warranty requirements and will not void any manufacturer's warranty.
Part No: FRAM P3645
Oil Filter Element, PH11 from FRAM FILTERS Home -> Engine Systems -> Engine Parts->Fram Oil Filters
Original equipment on the majority of automotive and marine engines. These filters remove harmful contaminants from your engine oil.
Part No: PH11
Whipping Twine, White, #8 Thick (1mm), 150'L from FSE ROBLINE Home -> Cordage -> Rigging Products->Whipping Twine
Whipping Twine Add a finishing touch to your lines. Use this waxed polyester thread for spliced eyes, whipping or as a seizing line. Easy to use plastic spool . Available in 5 colors .
Part No: TY-10W
3mm Polyester Braid, 330lb. Breaking Strength, 15m (49.21') Spool Length, Black from FSE ROBLINE Home -> Cordage -> Running Rigging By The Foot->Polyester Braid Mini-Spools
Versatile, easily handled and easily spliced polyester double braid is ideal for use as control lines, lashing and dozens of other uses aboard. Best Use: Control lines, tie downs and general lashing . Construction: Double braid . Cover Fiber/Construction: 16-plait polyester . Core Fiber/Construction: 8-plait polyester .
Part No: MR-3BLK
6mm Racing Sheet, 2420lb. Breaking Strength, Gray from FSE ROBLINE Home -> Sailboat -> Running Rigging By The Foot -> Running Rigging->Racing Sheet
We prefer it over Salsa or the Maffioli products. We’re using Racing Sheet for our Ultimate 20 jibsheets, and as the mainsheet on our Byte dinghy. " Ideal for dinghies and used by multiple World and International champions. Wear-resistant plaited design is made of Dyneema SK-75 and impregnated nylon in a single braid construction. It’s extremely low-stretch, abrasion-resistant, resists kinking, is easy to handle and easy to splice. Best Use: Sheets for sportboat and dinghy classes .
Part No: RS-6GRY
5mm 8-Plaited Dinghy Line, 1232lb. Breaking Strength, Red from FSE ROBLINE Home -> Sailboat -> Running Rigging By The Foot->8-Plaited Dinghy Line
A pre-stretched, all polyester line that’s very useful for a wide range of dinghy and small keelboat applications. Low stretch, low water absorption and very easily handled. Best Use: Control lines and spinnaker halyards for dinghies and small keel boats . Construction: Braided cover, parallel core . Cover Fiber/Construction: 8-plait braided polyester . Core Fiber/Construction: Parallel polyester . Stretch: 2. 3% at 15% breaking strength.
Part No: 8P-5R
3mm Dingy Control Line, 990lb. Breaking Strength, Red Fleck from FSE ROBLINE Home -> Cordage -> Running Rigging By The Foot -> Running Rigging->Dinghy Control Line
Combining high strength, low stretch and light weight, Dinghy Control line is ideal for uses such as main and jib halyards and downhaul/outhaul control lines. The braided polyester cover gives comfortable handling and the braided Dyneema SK-75 core provides the strength. Each individual fiber in the core is impregnated with Robline’s unique S. Y. I. S. In addition, the cover can be stripped as needed to save weight and decrease the diameter. Best Use: Dinghy halyards, downhauls and outhauls .
Part No: DC-3R
8mm Racing Sheet, 4180lb. Breaking Strength, Gray from FSE ROBLINE Home -> Cordage -> Running Rigging By The Foot -> Running Rigging->Racing Sheet
We prefer it over Salsa or the Maffioli products. We’re using Racing Sheet for our Ultimate 20 jibsheets, and as the mainsheet on our Byte dinghy. " Ideal for dinghies and used by multiple World and International champions. Wear-resistant plaited design is made of Dyneema SK-75 and impregnated nylon in a single braid construction. It’s extremely low-stretch, abrasion-resistant, resists kinking, is easy to handle and easy to splice. Best Use: Sheets for sportboat and dinghy classes .
Part No: RS-8GRY
Whipping Twine, White, #16 Thisk (1.5mm), 104'L from FSE ROBLINE Home -> Cordage -> Rigging Products->Whipping Twine
Whipping Twine Add a finishing touch to your lines. Use this waxed polyester thread for spliced eyes, whipping or as a seizing line. Easy to use plastic spool . Available in 5 colors .
Part No: TY-15W
4mm 8-Plaited Dinghy Line, 858lb. Breaking Strength, Blue from FSE ROBLINE Home -> Cordage -> Running Rigging By The Foot->8-Plaited Dinghy Line
A pre-stretched, all polyester line that’s very useful for a wide range of dinghy and small keelboat applications. Low stretch, low water absorption and very easily handled. Best Use: Control lines and spinnaker halyards for dinghies and small keel boats . Construction: Braided cover, parallel core . Cover Fiber/Construction: 8-plait braided polyester . Core Fiber/Construction: Parallel polyester . Stretch: 2.
Part No: 8P-4BLU
Whipping Twine, Red, #4 Med. (0.8mm), 295'L from FSE ROBLINE Home -> Cordage -> Rigging Products->Whipping Twine
Whipping Twine Add a finishing touch to your lines. Use this waxed polyester thread for spliced eyes, whipping or as a seizing line. Easy to use plastic spool . Available in 5 colors .
Part No: TY-08R
3mm Dingy Control Line, 990lb. Breaking Strength, Green Fleck from FSE ROBLINE Home -> Cordage -> Running Rigging By The Foot -> Running Rigging->Dinghy Control Line
Combining high strength, low stretch and light weight, Dinghy Control line is ideal for uses such as main and jib halyards and downhaul/outhaul control lines. The braided polyester cover gives comfortable handling and the braided Dyneema SK-75 core provides the strength. Each individual fiber in the core is impregnated with Robline’s unique S. Y. I. S. In addition, the cover can be stripped as needed to save weight and decrease the diameter. Best Use: Dinghy halyards, downhauls and outhauls .
Part No: DC-3GRN
6mm Dingy Control Line, 3630 Breaking Strength, Green Fleck from FSE ROBLINE Home -> Cordage -> Running Rigging By The Foot -> Running Rigging->Dinghy Control Line
Combining high strength, low stretch and light weight, Dinghy Control line is ideal for uses such as main and jib halyards and downhaul/outhaul control lines. The braided polyester cover gives comfortable handling and the braided Dyneema SK-75 core provides the strength. Each individual fiber in the core is impregnated with Robline’s unique S. Y. I. S. In addition, the cover can be stripped as needed to save weight and decrease the diameter. Best Use: Dinghy halyards, downhauls and outhauls .
Part No: DC-6GRN
Whipping Twine, Gold, #4 Med. (0.8mm), 295'L from FSE ROBLINE Home -> Cordage -> Rigging Products->Whipping Twine
Whipping Twine Add a finishing touch to your lines. Use this waxed polyester thread for spliced eyes, whipping or as a seizing line. Easy to use plastic spool . Available in 5 colors .
Part No: TY-08BRN
Whipping Twine, White, #4 Med. (0.8mm), 295'L from FSE ROBLINE Home -> Cordage -> Rigging Products->Whipping Twine
Whipping Twine Add a finishing touch to your lines. Use this waxed polyester thread for spliced eyes, whipping or as a seizing line. Easy to use plastic spool . Available in 5 colors .
Part No: TY-08W
5mm Dingy Control Line, 2640lb. Breaking Strength, Blue Fleck from FSE ROBLINE Home -> Sailboat -> Running Rigging By The Foot -> Running Rigging->Dinghy Control Line
Combining high strength, low stretch and light weight, Dinghy Control line is ideal for uses such as main and jib halyards and downhaul/outhaul control lines. The braided polyester cover gives comfortable handling and the braided Dyneema SK-75 core provides the strength. Each individual fiber in the core is impregnated with Robline’s unique S. Y. I. S. In addition, the cover can be stripped as needed to save weight and decrease the diameter. Best Use: Dinghy halyards, downhauls and outhauls .
Part No: DC-5BLU
4mm Dingy Control Line, 1540lb. Breaking Strength, Green Fleck from FSE ROBLINE Home -> Sailboat -> Running Rigging By The Foot->Dinghy Control Line
Combining high strength, low stretch and light weight, Dinghy Control line is ideal for uses such as main and jib halyards and downhaul/outhaul control lines. The braided polyester cover gives comfortable handling and the braided Dyneema SK-75 core provides the strength. Each individual fiber in the core is impregnated with Robline’s unique S. Y. I. S. In addition, the cover can be stripped as needed to save weight and decrease the diameter. Best Use: Dinghy halyards, downhauls and outhauls .
Part No: DC-4GRN
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics12