Top Sellers
Adjustable Lock from TAYLOR
Three-part system provides easy snap-on/snap-off fender attachment and adjustment. A stainless base mounts to your boat, into which a peg snaps to hold the fender strap (sold separately). Fixed peg requires tying a knot to secure the fender at the desired height. Adjustable peg - adjust fender height by simply pulling on the strap. Max.
|
|
|
Adjustable Height Standard Friction Lock Pedestal Seat, Ribbed Series from GARELICK
Seat raises or lowers, locks at desired height . 2-7/8" (7cm) diameter stanchion tube, 9" (23cm) diameter base plate . Anodized protective finish helps prevent saltwater corrosion and weathering. . 2-7/8" (7cm) diameter ribbed stanchion tube, 9.
|
Auxiliary Outboard Bracket, 9-1/2" Vertical Lift, 7.5hp-30hp HP Rating from GARELICK
Built extra-tough and extra-wide for secondary engines including new higher-torque, four-stroke engines. Stainless torsion springs for easy lifting. Mounting board is 2" weatherproof and maintenance-free polypropylene. Five-position lock bar allows for better range trim adjustment. Maximum Weight: Model #193328: 169 lbs. , Model # 3683455: 175 lbs. . Style: Adjustable . Material: Anodized aluminum body w/ poly-propylene board . Attachment Method: Thru-bolt, backing plate .
|
4-Stroke Auxiliary Outboard Bracket from GARELICK
Gets your motor clear of the water when not in use to eliminate propeller drag and to protect the lower unit. Marine-grade stainless steel and a 2" thick polyethylene mounting board. Brackets adjust to transoms with plus or minus angles from 7° to 35° in 7° increments.
|
Gunwale Mount Pontoon Ladder, 4 Step from GARELICK
For use on pontoon boat side gates. Special vinyl sleeves between the first and second step protect the pontoon from damage. The overrail hooks snap into amounting sockets (included) suitable for temporary or permanent mounting. Made of durable 1''dia. aluminum tubing with comfortable white molded plastic steps. Hooks fold flat for compact storage. Four steps. 50''L. Hooks:13.
|
|
|
2'' Trnsm Ladder Extension Shim from GARELICK
Extends ladder farther off the transom. Use with spacer and face plate included with ladder.
|
Fold-Down Transom Ladder from GARELICK
Great for boats with small transoms. Includes a unique bracket for attaching to most angled or curved transoms in an area only 12"W x 6. 5"H. Both steps fold down for boarding.
|
Folding Dock/Raft ladder 3 step from GARELICK
Unique flip-up hinge mechanismUnique hinged ladder flips up and out of the water to prevent marine growth. Features a 10° angle for effortless boarding. Quick-release pins make it easy to remove for storage. 16"W steps have anodized aluminum tread and a curved step to make boarding more comfortable. Overall ladder width is 18". One-year warranty. Wide track 18"W ladder with full width 16" steps. Anodized aluminum heavy-walled 1"dia. tube construction.
|
Premium 4-Cycle Heavy-Duty SAE 15W40 Engine Oil, Gallon from WEST MARINE
An excellent choice for all 4-cycle inboard diesel and gasoline engines operating in all conditions. Clean-burning formula meets or exceeds both industry and factory performance specifications. Powerful additives allow for dependable engine service.
|
TankWatch® 4 Water/Holding Tank Monitor from SEALAND
Reliable micro float switches activate empty, low, mid and full tank levels on the indicator panel. No electrical components contact water or waste. Easy to install using universal flange (sold separately). Includes cap with micro float switches . Indicator panel . Gasket and stainless mounting hardware . Adapts to fit any water or holding tank up to 22" . 45" adjustable probes available by Special Order .
|
Fuel Sending Unit Only - 4-24'' Tank from TELEFLEX
Complete kit includes a reliable dash-mount gauge with a black face and white numerals. The triple patented sending unit has an adjustable float arm and U-channel that fits virtually all tanks from 4"-24" deep. Compatible with 12V DC systems with common or insulated ground.
|
PAR-Max 4 Water-System Pump, 12V from JABSCO
Flow rate: 16. 3 Litres/min (4. 3 gallons/min) Self-priming from dry up to 2. 4m (7. 8ft) Smooth flow. Dry running capability. Soft noise absorbing mounts. Snap-fit port fittings. Corrosion resistant materials. Meets USCG Regulation 183. 410 and ISO 8846 MARINE (ignition protection).
|
Outboard Oil - SAE 10W-40 from WEST MARINE
With a higher number of performance-boosting additives than automotive oil, this synthetic blend meets and exceeds the needs of high-performance outboards. It's special formula protects outboards from friction damage and engine wear. Outstanding viscosity at low temperatures. Greater detergency. Resists engine build up. Exceeds all 4-stroke outboard requirements.
|
|
4" from GARELICK, Gold from GARELICK, Height Adjuster from GARELICK
|
|
Home -> Seating & Covers -> Seating
Contemporary and durable, this seat turns on a sturdy, torque-resistant swivel. A great choice for houseboats, pontoons and cruisers, with heavy-duty, molded, seamless, vinyl cushions that keep foam comfortable and dry. Padded arm rests. Rugged, 30"H polished-aluminum stool frame. Seat measures 24"H x 19"W x 17 1/2"D. Shipped via FedEx Only, No U. S.
Part No: 43130-01:02
|
|
|
|
Home -> Seating & Covers -> Seating
Perfect for cruisers, houseboats, or pontoons where steering is in the center of the boat. Molded, seamless, 3" thick vinyl cushions keep seat comfortable and dry. Clean easily with soap and water. Seat measures 15 1/2"W x 19"D. Chair is 24"W x 17 1/2"H x 19"D overall. Made in U. S. A. Mfr. 's one year limited warranty. Seat only, polished frame .
Part No: 48003-01:02
|
|
|
|
Home -> Seating & Covers -> Seating
The ultimate helm seat for your runabout, performance sport boat, pontoon or cruiser. This seat offers a high tech, stylish look with loads of comfort features. Frame is constructed with a rigid polyethylene roto-molded core. Upholstered with mildew, UV and stain resistant marine-grade vinyl. Dual track flip-up bolster allows piloting from a sitting, standing or leaning position. Application: Center console, helm . Upholstery Material: Marine grade vinyl . 5"W x 19"D x 18"H .
Part No: 48950-01:02
|
|
|
|
Home -> Engine Systems -> Steering Systems
Forget about straining to tilt your manual lift motor. Constructed of 304 stainless steel and anodized aluminum tubing and castings, this leverage tool adjusts to fit motors to 40 hp. All contact points are rubber-coated to protect the engine shroud.
Part No: 71036:01
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks
For storing ladder on side coaming or transom. Identical to brackets included with each ladder.
Part No: 99193:01
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks
For mounting ladders on poly, teak or fiberglass swim platforms. Mounts underneath and includes a top backing plate. Use with spacer and face plate included with ladder. Stainless steel. Bracket: 3. 18''W x 9. 75''L. Top plate: 3''W x 7.
Part No: 99182:01
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks -> Ladders & Ramps->Ladder Standoffs
Aluminum standoffs with cushioned tips fit traction-molded poly step to support ladder against hull without marring. Sold in pairs.
Part No: 99000:01
|
|
|
|
Home -> Seating & Covers -> Seating->High Back Premium Fold Down Seats
This great-looking fold down seat features Dual Durometer foam for longer lasting comfort, contour styling for greater thigh and back support. The two-color vinyl upholstery resists sunlight, abrasion, dirt and grime. Choose from five color combinations.
Part No: 48691-15:02
|
|
|
|
Home -> Seating & Covers -> Seating -> Seat Hardware->Smooth Tube Pedestals
Smooth stanchion in a standard 2-7/8" diameter or the mid-range 3-1/2" diameter, fixed height or adjustable height.
Part No: 75404:01
|
|
|
|
Home -> Seating & Covers -> Tables->Quick Release Table Pedestal System
Revolutionary new table hardware system features a deck ring mount, that mounts flush with your deck so cutting a large center hole is not required. It's easy to use and install—the deck ring mounts nearly flush with deck for minimal interference when table is stowed. Quick release levers allow effortless take down of table for storage. Marine grade polymer components resist corrosion.
Part No: 75643:01
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks
Removable, black-coated aluminum ladder for low freeboard transoms features angled, stair like design with two oval, nonskid steps. Mounting Style: Mounting Bracket Material: Aluminum Number of Steps: Two Stand-Off Depth: Mounting bracket is 1 3/16" thick Dimensions Deployed: 28" x 13"Mounting Hardware: Included Fastener Size Required: 5/16" Dia.
Part No: 19812:01
|
|
|
|
Home -> Safety -> Man Overboard Gear->Buoy Mounting Brackets
Mounting brackets for USCG-approved Ring and Horseshoe Buoys.
Part No: BRKT-DLX
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks -> Swim Platforms/Steps->Traction Step Plates
.
Part No: 26376:01
|
|
|
|
|
Home -> Seating & Covers -> Seating -> Seat Hardware->Smooth Tube Pedestals
Smooth stanchion in a standard 2-7/8" diameter or the mid-range 3-1/2" diameter, fixed height or adjustable height.
Part No: 75432:01
|
|
|
|
|
Home -> Seating & Covers -> Seating -> Seat Hardware->Smooth Tube Pedestals
Smooth stanchion in a standard 2-7/8" diameter or the mid-range 3-1/2" diameter, fixed height or adjustable height.
Part No: 75438:01
|
|
|
|
Home -> Seating & Covers -> Seating->Roto Molded Chairs
Beautiful styling and comfortable dimensions make these chairs ideal for center console installations. Ergonomically-designed. Comfortable, removable, quilted white vinyl cushions with high-density urethane foam padding, contrast gray vinyl edge piping, and a vinyl weave underside to minimize trapped moisture. Premium chair offers an extra wide seat and arm rests.
Part No: 48050-22:02
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks -> Ladders & Ramps->Anodized Aluminum Flip-Up Dock Ladder
Unique flip-up hinge mechanismUnique hinged ladder flips up and out of the water to prevent marine growth. Features a 10° angle for effortless boarding. Quick-release pins make it easy to remove for storage. 16"W steps have anodized aluminum tread and a curved step to make boarding more comfortable. Overall ladder width is 18". One-year warranty. Wide track 18"W ladder with full width 16" steps. Anodized aluminum heavy-walled 1"dia. tube construction.
Part No: 15750:01
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks -> Ladders & Ramps
Identical to the mount included with each ladder. Permits multiple mounting locations on your boat. Includes 1" thick poly spacer with 10° angle, lock and stainless face plate. 2. 75" W x 3. 62" H.
Part No: 99180:01
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks -> Ladders & Ramps
Contoured to hug the hull of inflatable boats. Attaches to floorboard or side with 3/8'' line and heavy-duty swivel snap. 1'' dia. anodized aluminum tubing with plastic rungs. Vinyl sleeves protect hull fabric.
Part No: 13002:01
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Telescoping Stainless Hook Ladders
Stainless Steel Telescoping Hook Ladders feature comfortably contoured, traction-molded polyethylene steps, vinyl-covered folding hooks and one-piece aluminum standoffs.
Part No: 06141:01
|
|
|
|
Home -> Seating & Covers -> Seating->Millennium 2000 Seat Swivel/Slide System
The easy-to-use aluminum Mill 2000 system combines dual Quick-Lock handles, for stable, wobble-free support; a positive lock-action slide, with 6" fore-and-aft travel; and a swiveling spider, with 4-prong, 360° rotation, for smooth operation. Slider plate is 13 3/4" x 8" with a 5" x 12" mounting hole pattern. Use with 2 7/8"dia. fluted pedestals only, including the PosiPin-type that secures the stanchion at specific 1" increments with a spring-loaded pin.
Part No: 75020:01
|
|
|
|
Home -> Seating & Covers -> Seating->Compact Molded Seats
Contour-molded seat design includes front waterfall-tapered edges for extra thigh comfort. Includes all the quality extras you would expect from Garelick, like ergonomic design for comfort and support–with or without cushions–and marine-grade, waterproof components. Compatible with all Garelick pedestal hardware. 17"H x 17 1/2"W x 18 1/2"D.
Part No: 48420-01:02
|
|
|
|
Home -> Engine Systems -> Motor Mounts -> Motor Mounts
Secure your motor to the boat with this strong, 700-lb. tensile strength cable. It's clad in clear vinyl so it won't mar your boat, motor or bracket. Heavy-duty, rust-resistant swivel snap.
Part No: 71030:01
|
|
|
|
Home -> Seating & Covers -> Tables
Stowable Table Pedestal for Smaller Boats Provides salon areas and pontoon decks with removable dinette tables. Engineered for marine use . Three piece, all-aluminum provides solid table base . Fluted profile stanchion with protective anodized finish . Quick stowage .
Part No: 75340:01
|
|
|
|
|
Home -> Safety -> Man Overboard Gear->Buoy Mounting Brackets
Mounting brackets for USCG-approved Ring and Horseshoe Buoys.
Part No: BRKT-HORSE
|
|
|
|
|
Home -> Seating & Covers -> Seating->Millennium 2000 Seat Swivel/Slide System
The easy-to-use aluminum Mill 2000 system combines dual Quick-Lock handles, for stable, wobble-free support; a positive lock-action slide, with 6" fore-and-aft travel; and a swiveling spider, with 4-prong, 360° rotation, for smooth operation. Slider plate is 13 3/4" x 8" with a 5" x 12" mounting hole pattern. Use with 2 7/8"dia. fluted pedestals only, including the PosiPin-type that secures the stanchion at specific 1" increments with a spring-loaded pin.
Part No: 75535:01
|
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks -> Ladders & Ramps->Telescoping Stainless Hook Ladders
Stainless Steel Telescoping Hook Ladders feature comfortably contoured, traction-molded polyethylene steps, vinyl-covered folding hooks and one-piece aluminum standoffs.
Part No: 06131:01
|
|
|
|
Home -> Seating & Covers -> Seating -> Seat Hardware
Active Seat Suspension Systems absorb and minimize up to 75% of the shock, jolt, and vibration transmitted to the passenger from the forces of roll, pitch, and yaw. Made from rugged, high-tensile, anodized aluminum with stainless steel hardware. Standard bolt hole pattern allows for mounting on top of pedestal and beneath any individual seat . Easily mounts to almost any current seat. Standard bolt hole pattern allows for easy mounting beneath seat to the deck, a box, or the floor of a boat .
Part No: 77000:01
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Fender Accessories
Adjusting your fenders for different dock heights is easy with this adjuster. Simply pull on the tail of the line to raise fender height. Push the lock to release. Snaps securely over lifelines so it won't fall in the water when deployed over the side.
Part No: 71080:01
|
|
|
|
Home -> Seating & Covers -> Seating -> Seat Hardware
Quick-release for easy seat removal leaves only the small sturdy plastic tracks behind.
Part No: 75019:01
|
|
|
