Seacock, 1-1/2" Inlet (NPS), 1-1/2" Discharge (NPT), 1-1/4" Side (NPT) from GROCO
With NPT-threaded side port for permanent installation of an in-line ball valve or other threaded component. Enables engine to function as a bilge pump in an emergency. Handle may be relocated to either side of the valve body. 316 stainless-steel ball and stem.

Replacement mounting board 9-1/2" x 10-3/4" x 2" from GARELICK
Measures 9 1/2'' x 10 3/4'' x 2'' and fits both Lift & Lower and Stationary outboard brackets.

Original Bellows Shaft Seal, 1-1/2", Stern Tube: 2" to 2-3/4" from LASDROP SHAFT SEALS
The Original "Bellows" face seal features a vibration-absorbing bellows ideal for use on sailboats, powerboats or workboats. Our AMORFLEX bellows are second to none. This product is constructed of silicon rubber and hand wrapped in three layers of fiberglass on the inside. Like all Lasdrop models, a cutlass bearing is incorporated in to the product to ensure correct alignment with the shaft. The Original Bellows seal will fit stern tubes from 1-1/2" to 10-1/2" in diameter.

52gal. Flexible Water Tank, 27-1/2" x 68-1/4" from PLASTIMO
Flexible, light and form-fitting, these tanks use a PVC bladder inside a tough, abrasion-resistant nylon outer “envelope. ” Maintenance is easy because the inner bladder can be removed for cleaning and inspection. The bladder is slightly oversized so pressure is exerted on its nylon shell, rather than on the heat-welded seams. 1 1/2" 90° fill and 1/2" straight outlet fittings ready to install. Port Sizes: 1-1/2" 90° fill, 1/2" straight outlet . Vent: No .

12V Macerator Pump, 14A Draw from SHURFLO
Designed specifically for the marine environment with run dry premium impeller technology. 5" male thread to screw directly onto a tank flange. Type: Macerating flexible impeller gpm: 13 Macerates: Yes Self-Prime: 5' Material: Nylon body, nitrile impeller, stainless wear plate Port Sizes: Inlet: 1-1/2" barb and 1-1/2" NPT male; Outlet: 1" hose barb Dimensions: 3-3/8"H x 4-5/8"W x 11"L Innovative blade design ensures problem-free pumping Inlet port has both a 1.

Starboard Side Mount, White Housing from AQUA-SIGNAL
These new LED navigation lights are a direct replacement for Aqua Signal Series 40 & 41 direct mount lights. They feature a modern design and are an optimal size for sport boats and yachts up to 164' (50m). Each light contains two state-of-the-art LEDs with patented prism technology for increased brightness and additional safety. Rated at 50,000 hours run time. Dimensions: 4-1/8"H x 4"W x 2-1/2"D . Mounting Hardware: Not included . Volts: 12V or 24V. Draw: 0.

Port Side Mount, White Housing from AQUA-SIGNAL
These new LED navigation lights are a direct replacement for Aqua Signal Series 40 & 41 direct mount lights. They feature a modern design and are an optimal size for sport boats and yachts up to 164' (50m). Each light contains two state-of-the-art LEDs with patented prism technology for increased brightness and additional safety. Rated at 50,000 hours run time. Dimensions: 4-1/8"H x 4"W x 2-1/2"D . Mounting Hardware: Not included . Volts: 12V or 24V. Draw: 0.

24V Macerator Pump, 8A Draw from SHURFLO
Designed specifically for the marine environment with run dry premium impeller technology. 5" male thread to screw directly onto a tank flange. Type: Macerating flexible impeller gpm: 13 Macerates: Yes Self-Prime: 5' Material: Nylon body, nitrile impeller, stainless wear plate Port Sizes: Inlet: 1-1/2" barb and 1-1/2" NPT male; Outlet: 1" hose barb Dimensions: 3-3/8"H x 4-5/8"W x 11"L Innovative blade design ensures problem-free pumping Inlet port has both a 1.

800gph Bait Sentry Pump, 30–50gal. Tank, 2.75A Draw from SHURFLO
The Bait Sentry’s magnetically driven impeller moves large quantities of water and handles solid debris without motor damage. If the impeller locks up, magnets break free, saving the motor from burnout. 24-hour dry run time. Type: Bait tank pump . Inlets/Outlets: 3/4" NPT inlet, 3/4" Barb outlet (1100 GPH model has 1-1/8" barbed outlet) . Features: Includes dual port for easy washdown connections, continuous duty, ignition protected, Marine UL Listed . Warranty: Three years .

Small Recessed Transom Shower from SHURFLO
Ideal for mounting to any horizontal surface. Kit includes spray nozzle, hose and necessary hardware for easy installation. White. Material: ABS plastic . Dimensions: 3-7/8"H x 3"W x 2-7/8"L . Port Sizes: 1/2" NPT . Clearance: 2-1/4" .

1100gph Bait Sentry Pump, Over 50gal. Tank, 3.75A Draw from SHURFLO
The Bait Sentry’s magnetically driven impeller moves large quantities of water and handles solid debris without motor damage. If the impeller locks up, magnets break free, saving the motor from burnout. 24-hour dry run time. Type: Bait tank pump . Inlets/Outlets: 3/4" NPT inlet, 3/4" Barb outlet (1100 GPH model has 1-1/8" barbed outlet) . Features: Includes dual port for easy washdown connections, continuous duty, ignition protected, Marine UL Listed . Warranty: Three years .

9.5 gpm Pump, 1/2" NPT Ports, 7-3/4"H x 7-1/4"W x 10-1/2"L, Nitrile Impeller from JABSCO
Similar to Water Puppy DC pumps, but for use with shore power or AC power from your genset. Self-priming and portable. Accepts optional vacuum switch to shut off the pump automatically if unattended, preventing dry running. Removable end cover enables easy impeller service. Includes neoprene impeller and grounded power cord.

Shower/Mixer Faucet Combo from SHURFLO
This shower mixer has a water conservation button built-in to the handle. Chrome-plated with an easy grip handle, ceramic disc valves and 72" retractable hose. Includes flexible 1/2" NPT connection hoses for easy installation. Material: Brass . Dimensions: 6"H x 6-3/8"W x 7-1/4"L . Port Sizes: 1/2" NPT . Clearance: 2-1/4" . Cutout Size: 2-1/2". Manufacturer's Documents Installation Guidelines.

Low-Pressure Fuel Delivery Pump from SIG MARINE (2006) LT
Designed for use with SIG Marine diesel heaters where the fuel supply cannot be gravity fed. Inlet and outlet ports are female 1/8" NPT. Includes hose fittings and mounting screws. Draws 2A @ 12V DC. 3"dia. x 5-1/2"H.

Rule-Mate 1100, 12V, 3.4A Draw, 1-1/8" Port, 4.5"H x 5"W from RULE INDUSTRIES
The new eco-friendly Rule Mate series of Bilge pumps feature a solid state water sensing technology that eliminates the need for a separate float switch. After the water is pumped out, another sensor shuts the pump off. The sensor's unique "field effect" technology is programmed to recognize the dielectric constant of water only. It's part of Rule's continuing commitment to preserving our waterway. The pumps are preferred by yachtsmen and commercial fishermen the world over.