Top Sellers
Stern Rail Outboard Motor Mount - Aluminum for 1-1/4" Railings from EDSON CORPORATION
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.
|
Deck Fill, Gas, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
|
Power Bubbles 12V DC Aerator from MARINE METALS
This system runs on low current as it's dual bellows aerate up to 2L per minute of air. It saturates circulating water with oxygen. Double discharge allows aeration of one or two livewells. Increases flow capacity. Includes 10' of air tubing. Two large airstones allow the pump to be mounted in any protected area. Suitable for fresh or saltwater. Two anti-siphon valves protect pump against water intrusion. Quietly operates with solid-state circuits. Draw: 1/4A at 12V DC.
|
Flush Cup Door Latch from PERKO
Chrome plated zinc alloy with sliding lock button. For door thickness 3/4 to 1-1/8 inches. Supplied with black plastic spacer for surface mounting. Bevel/Strike Type: Regular w/Box. Case Dimensions: 2-1/8 x 1-3/4 .
|
1-1/2" Traveler Track End Stop from SCHAEFER
Stop-End Traveler 1. 5in|Stop-End Traveler 1.
|
Float Switch from SHURFLO
Offered with or without a protective cage, this non-mercury float switch utilizes mechanical contacts for reliable bilge pump activation. Includes 3', tinned wire leads. May be mounted apart from pump or snapped into base plate of Shurflo 380, 500, 700 and 1000gph pumps. 4. 4"L x 3. 6"W x 1. 3"H. For use with 12V and 24V DC pumps. ABS plastic. Two year limited warranty. Activation Method: Float with mechanical contacts .
|
|
|
12V Reversible Flo-Master Vane Pump from GROCO
Rigid-vane pumps for pumping water, oil or diesel. Positive-displacement pump is self-priming to 2’. Long-lasting, continuous-duty, ignition-protected motor has ball bearings and a #316 stainless-steel shaft Application: General light to intermittent duty utility pumping . Gallons Per Minute: 6. 5 (oil) . Material: Bronze pumphead, stainless shaft . Port Sizes: Male garden hose or 1/2" female NPT inlet & outlet . Dimensions: 3 3/8"H x 4 3/8"W x 7 1/2"L .
|
Nauta 9 Gallon Flexible Fuel Tank from IMTRA CORPORATION
Flexible gasoline tanks won't rust, don't rattle, are easy to tie down, easy to carry, and won't scrape your boat. The Nauta 9-Gallon flexible fuel tank features comfortable, molded carrying handles and rugged 840-denier nylon construction. Fitted with a 1 1/2'' pivoting fill and a capped and 1/4'' NPT hose barb. Measures 28 1/2'' x 17 1/2'' x 6 1/2''.
|
|
|
Flex Trim - Black 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.
|
WL/1 Fairlead Model from SPINLOCK
New low-profile design easily mounts to 1" stanchion using internal clamping system. WL/2 sheave model utilizes unique tracker ball angle adjustment. WL/1 Fairlead model includes stainless-steel bullseye for strength.
|
1/4" NPT X 3/8" Brass hose barb from MOELLER
1/4 NPT X 3/8" Brass Hose barbs with male threads.
|
1/8" NPT X 5/16" Brass hose barb from MOELLER
1/8 NPT X 5/16" Brass hose barbs with male threads.
|
1/4" NPT X 5/16" Brass hose barb from MOELLER
1/4 NPT X 5/16" Brass hose barbs with male threads.
|
|
1, 1-1, 1" Pipe, NPS-NPT 1" from GROCO, 12V from GROCO, 24V from GROCO
|
|
Home -> Plumbing -> Fittings & Valves->Seacock/Strainer Combination
Incorporates full flow, ball-type seacock and top-quality strainer into a single unit. Features ball valve with stainless stem and full flow ball. Filter basket and spin-off strainer cover allow easy access to filter basket.
Part No: BVS-1000
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Freshwater Pumps->Groco Service Kits and Repair Parts
Groco Replacement Parts and Service Kits We stock an extensive selection of parts and service kits for virtually all products. In addition, we can quickly get any part you need to repair your Jabsco, SHURflo, Raritan or Groco equipment directly from the manufacturer through our Special Order department. If you know the part number you need simply order the part using the Model or manufacturer's part number. If you don't know either number, please call us for assistance.
Part No: HF-1
|
|
|
|
Home -> Plumbing -> Fittings & Valves -> Valves, Deck Fills, Misc.->Flanged Adaptors for Ball Valves
Combine NPS threads at the bottom and NPT threads at the top to eliminate common (and dangerous) thread mismatches when in-line "ball" valves are screwed onto thru hulls. Triangular base provides strain relief to the hull. Complete with bonding screw and eye for safety tie.
Part No: IBVF-1000
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Check Valves
For vertical or horizontal use in fuel or water systems to maintain pump prime or prevent backflow to fluid source. The unique design minimizes fluid turbulence and flow restriction.
Part No: CV-200
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Check Valves
For vertical or horizontal use in fuel or water systems to maintain pump prime or prevent backflow to fluid source. The unique design minimizes fluid turbulence and flow restriction.
Part No: CV-75
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Check Valves
For vertical or horizontal use in fuel or water systems to maintain pump prime or prevent backflow to fluid source. The unique design minimizes fluid turbulence and flow restriction.
Part No: CV-125
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Check Valves
For vertical or horizontal use in fuel or water systems to maintain pump prime or prevent backflow to fluid source. The unique design minimizes fluid turbulence and flow restriction.
Part No: CV-50
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Check Valves
For vertical or horizontal use in fuel or water systems to maintain pump prime or prevent backflow to fluid source. The unique design minimizes fluid turbulence and flow restriction.
Part No: CV-100
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves -> Valves, Deck Fills, Misc.->Bronze Check Valves
For vertical or horizontal use in fuel or water systems to maintain pump prime or prevent backflow to fluid source. The unique design minimizes fluid turbulence and flow restriction.
Part No: CV-150
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Full-Flow Safety Seacocks
With NPT-threaded side port for permanent installation of an in-line ball valve or other threaded component. Enables engine to function as a bilge pump in an emergency. Handle may be relocated to either side of the valve body. 316 stainless-steel ball and stem.
Part No: SBV-1500-P
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Cast Bronze Threaded Nipples, NPT
Bronze plumbing fittings.
Part No: PN-1500
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Cast Bronze Threaded Nipples, NPT
Bronze plumbing fittings.
Part No: PN-2000
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Cast Bronze Threaded Nipples, NPT
Bronze plumbing fittings.
Part No: PN-750
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Cast Bronze Threaded Nipples, NPT
Bronze plumbing fittings.
Part No: PN-1250
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Cast Bronze Threaded Nipples, NPT
Bronze plumbing fittings.
Part No: PN-1000
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Cast Bronze Threaded Nipples, NPT
Bronze plumbing fittings.
Part No: PN-500
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Safety Seacock Converters
Screws into the top of any seacock and turns it into a safety seacock. The quick-release plug enables simple cooling system flushing, winterization, and draining.
Part No: SSC-2000
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Safety Seacock Converters
Screws into the top of any seacock and turns it into a safety seacock. The quick-release plug enables simple cooling system flushing, winterization, and draining.
Part No: SSC-1500
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Raw Water Manifolds
Simplifies plumbing by allowing you to plumb multiple raw water consumers to a single inlet, eliminating the need for multiple thru-hulls and strainers. They are better than tee fittings because they reduce restrictions to downstream devices. The male barbed end connects to the “prime consumer,” and the male threaded end screws into a seacock or strainer outlet. The female threaded ports are for secondary consumers like air conditioners or generators.
Part No: RWM-2000
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Slotted Hull Strainers with Clean-Out Door
Groco strainers have a unique access door which makes it easy to clear debris and marine growth that can hamper performance and even cause premature failure in water pumps and exhaust systems. Eliminating the need to haul boats out of the water, these strainers can save enormous amounts of time and money in the event of an accident or emergency which requires immediate servicing of the strainer itself.
Part No: ASC-3000
|
|
|
|
Home -> Plumbing -> Fittings & Valves->ARG-Series Strainer Parts & Repair Kits
ARG-Series Strainer Parts & Repair Kits Baskets: Stainless steel or nylon. Sight glass.
Part No: ARG-501-PC
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->ARG-Series Strainer Parts & Repair Kits
ARG-Series Strainer Parts & Repair Kits Baskets: Stainless steel or nylon. Sight glass.
Part No: ARG-1001-PC
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->ARG-Series Strainer Parts & Repair Kits
ARG-Series Strainer Parts & Repair Kits Baskets: Stainless steel or nylon. Sight glass.
Part No: ARG-1501-PC
|
|
|
|
Home -> Plumbing -> Fittings & Valves
Offered in full- or standard-flow designs. The cast hex nut facilitates installation. Generous seating area for double clamping.
|
|
|
|
Home -> Plumbing -> Fittings & Valves
Grinds and discharges debris, keeping water flowing freely to generators and air conditioners. Can be set to automatically run at intervals or can be manually started at any time. Threaded 1-1/2" NPT inlet. Two 3/4" NPT and one 1/2" NPT outlet ports to generators and air conditioners. Draws 30A @ 12V DC. 13. 5"H x 7.
Part No: 970-1500-12
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->ARG-Series Strainer Parts & Repair Kits
ARG-Series Strainer Parts & Repair Kits Baskets: Stainless steel or nylon. Sight glass.
Part No: WSA-752
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->ARG-Series Strainer Parts & Repair Kits
ARG-Series Strainer Parts & Repair Kits Baskets: Stainless steel or nylon. Sight glass.
Part No: WSA-1002
|
|
|
|
Home -> Plumbing -> Marine Sanitation->SweetTank™ Odor-Neutralizing System for Holding Tanks
The SweetTank™ concept has been developed to stop odors in yacht and RV holding tanks without the use of chemicals or filters. By inducing a constant flow of air into the holding tank through a submerged aeration tube, SweetTank produces an oxygen-rich environment in which the anaerobic bacteria cannot thrive, thus eliminating unpleasant odors. The heart of the SweetTank system is a compact module that operates continuously to deliver air to the holding tank using less than 3-watts of DC power.
Part No: STK-18 24V
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Stainless-Steel Thru-Hull Barbed Fittings
Stainless-Steel Thru-Hull Barbed Fittings.
Part No: HTH-500-S
|
|
|
|
Home -> Plumbing -> Marine Sanitation -> Waste Pumps
Sizes are available to fit any rigid holding tank (36" maximum depth, 1" inch increments), and since waste is macerated BEFORE it leaves the tank, smaller hose and overboard seacock (3/4") may be used in the discharge line.
Part No: 155-6110-12
|
|
|
