Top Sellers
Flat Cam Riser, 1"H from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
|
|
|
Hi-Load Ti-Lite Car, Torlon Bearings, 850lb. SWL from HARKEN
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Boat Size: Dinghies, multihulls, to small offshore boats. Material: One-piece solid aluminum . Shackle: Pivoting toggle models—fasten control blocks directly to post without needing a shackle. Sheave: Fixed sheave models—mainsheet loads 40° or less from vertical.
|
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
57mm Black Magic AirBlock, High-Load Strap Head with Becket, 2,500lb. SWL, 3.6oz. from HARKEN
Strong, lightweight aluminum blocks for offshore boats Used for sheets, halyards, running backstays and control lines on offshore boats, these strong, lightweight blocks are made of sculpted aluminum with Torlon rollers and carbon black balls for strength and UV protection. Cheek Material/Finish: 6160-T6 Hardkote anodized aluminum . Sheave Size: 57mm (2-1/4") . Construction: Three fasteners for quick disassembly. Plastic isolators separate dissimilar metals. Three-way head system.
|
RigTune Pro Digital Rig Tension Gauge from HARKEN
Old-fashioned spring gauges, like the Loos Pro, don’t provide repeatable numbers. This product does. Unlike spring-loaded gauges, the Harken Rigtune Pro measures rig tension to the nearest kilogram. A load cell records the pressure on one of the pins and the measurement is displayed on a simple, easy-to-read screen. The Rigtune Pro fits a specific range of rigging sizes, 2. As rigging is deflected over three pins on the back of the gauge, a load cell records the pressure on one of the pins.
|
Replacement Ball Bearings for 150 Cam Cleat from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
|
Spinnaker Pole Car, Track #2720, 900sq.ft. Max. Sail Area, 1125lb. SWL from HARKEN
Now with captive ball bearings, which eliminates the need for a ball-bearing loader during installation or removal from track. These cars run freely, fit low-beam traveler track and are easy to adjust under any load.
|
29mm Carbo Clew Block Assembly from HARKEN
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
|
Midrange Four-Hole Eyestrap from HARKEN
Forged eyestraps are extremely strong and their smooth shape won’t chafe line. Stainless steel . 6000lb. Breaking load.
|
Winch Service Kit from HARKEN
Contains 10 pawls and 10 springs.
|
|
|
1/4" Dia. Stamped Halyard Shackle, 1,000SWL from SCHAEFER
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.
|
|
|
Flex Trim - Black 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.
|
|
from HARKEN, 75oz, 3oz, 0oz, 4oz, 0oz, 0, 1, SWL from HARKEN, 2500lb, 330lb, 2
|
|
Home -> Sailboat -> Blocks->16mm AirBlocks®
AirBlocks have a lightweight design and a unique patented bearing system which uses stainless steel balls in a captive, grooved race. Very high working loads in an extremely lightweight block, with the best strength-to-weight ratios around. Sheave: Delrin. Sheave Size: 5/8" (16mm). Ball Bearings: Stainless. Line Diameter: 7/32" max.
Part No: 467
|
|
|
|
Home -> Sailboat -> Blocks->57mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 2615
|
|
|
|
Home -> Sailboat -> Blocks->29mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 344
|
|
|
|
Home -> Sailboat -> Winches -> Winch Handles & Holders->SpeedGrip Ball Bearing Winch Handles
SpeedGrip handles use a ball bearing knob on the top of the grip to allow much faster grinding under low loads, and more powerful two-handed grinding under high loads. A Harken exclusive. Grip: Ball-bearing double, with ball-bearing top. Type: Locking .
Part No: B8ASG
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Battcar Batten Traveler Systems, System A Components
Add a lazy jack system, and raising or lowering your mainsail becomes a single person operation. Battcar systems also improve sailing performance, because they do not require the sail to be cut flat, or reduce the size of the roach, as with other systems. They make mainsail handling safer, by allowing you to raise or lower the sail with practically no effort at all, even with the sail powered up. At the inboard end of every batten, special ball bearing or slider Battcars move along the track.
Part No: 1777
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->Midrange Blocks
Great for mainsheet or spinnaker blocks and control lines on offshore yachts. Robust construction handles high loads. Ball-bearing sheaves minimize friction. Beefier posts and wrap-around straps create much higher working loads. Three-way head system permits blocks to swivel or be fixed side-to-side or fore-and-aft. Beckets are removable. Where applicable, blocks use 1/4" fasteners. Ball Bearings: Torlon high-load ball bearings in fitted races. Line Diameter: 9/16" max.
Part No: 1544
|
|
|
|
Home -> Sailboat -> Blocks->Hexaratchet II + 2 Ratchet Blocks
Larger version of the Little Hexaratchets with the same Teflon®-impregnated aluminum sheave. Easy to operate on/off button, and 3-way head system. Holding power of 15:1 with 180° wrap. Sheave: Teflon impregnated Hardkote anodized aluminum. Bearings: Delrin. Sheave Size: 3" (76mm). Line Diameter: 7/16" max. Shackle/Strap Type: Stamped swivel shackle with three-way head.
Part No: 050
|
|
|
|
Home -> Sailboat -> Blocks->Micro Blocks
Extremely lightweight, free running blocks. Designed for any number of uses on dinghies and for lightly-loaded control lines on boats of all sizes (inside masts and booms, lead car returns, tackle, etc. ). Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size 7/8" (22mm) . Line Dia: 1/4" max. . Cheek Material/Finish: Polished 316 stainless . Shackle/Strap Type: Fixed loop, loop with shackle .
Part No: 233
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang
Kit includes two endcaps, screws, blue loctite and instructions.
Part No: HMR3
|
|
|
|
Home -> Sailboat -> Blocks->Big Bullet Blocks
Can be used as main or jib sheet blocks on dinghies, or for control line applications, such as travelers, cunninghams or boom vangs on offshore boats. Where applicable, blocks use #10 fasteners. Sheave: Delrin. Sheave Size: 1-1/2" (38mm). Ball Bearings: Delrin. Line Diameter: 3/8" . Cheek Material/Finish: Plastic/stainless straps.
Part No: 168
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->3" Blocks
Designed for small to medium-sized offshore boats, catamarans, etc. Large diameter sheaves reduce the friction caused by bending a line over a small sheave. All feature three-way head system and removable beckets. Sheave: Hardkote anodized Teflon-impregnated aluminum. Ball Bearings: Delrin ball bearings/Hi-Load wire blocks: Torlon ball bearings. Sheave Size: 3" (76mm). Line Diameter: 7/16" max. Cheek Material/Finish: Plastic/Stainless steel.
Part No: 005
|
|
|
|
Home -> Clothing Accessories -> Gloves -> Sailing Gloves->Black Magic Full-Finger Gloves
Application: Inshore and dinghy performance sailing Configuration: Full-finger except 3/4-thumb and index finger Fabric: Unique, gripping fabric w/nylon Spandex mesh backs Lining: None Wrist Closure: Elastic wristbands, adjustable Velcro tabs Color: Gray/Black Size: Unisex S-XXL.
Part No: 2564L
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Midrange Control Black Accessories
Midrange traveler end controls allow installation of traveler purchase from 2:1 to 4:1, fastening directly to the track without extra holes in the deck.
Part No: 1638
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Mainsheet Traveler->Big Boat Track & Accessories
Harken’s Big Boat Traveler Track is available in low-beam and high-beam configurations.
Part No: 3154.1.2M
|
|
|
|
Home -> Sailboat -> Blocks->ESP Blocks
Designed to handle the high loads generated by modern racing and cruising boats, ESP blocks feature axle bearings to ensure smooth, hitch-free performance under high load and heavy winds. Sheave: Long-glass engineered plastic, except lockoff: aluminum. Bearings: Contained-axle sleeve and carbon-black Torlon ball bearings. Sheave Size: 3" (76mm). Line Diameter: 3/4".
Part No: 6091
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Mainsheet Traveler->Small Boat Windward Sheeting Traveler Cars
A patented slider mechanism allows cars to be pulled to windward without releasing the leeward control line. Windward sheeting cars stay in place during tacks. Makes racing short-handed a lot more fun. Indicated use is based upon monohulls with end-boom travelers. Track Type: Small Boat CB Track: 2720, 2721, 373, 374, 2725, 2751. Block Type: Uses 2740 Control Blocks. Cleat Type: Modified 150 Cam-Matic. Shackle: Pivoting shackle. Cam: Leeward cleat opens automatically. Purchase: 2:1/3:1.
Part No: 2746
|
|
|
|
|
Home -> Sailboat -> Blocks->29mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 352
|
|
![1" Wire Forkhead Block with Becket, 1,000lb. SWL, 1.0oz. from HARKEN]( "1\" Wire Forkhead Block with Becket, 1,000lb. SWL, 1.0oz. from HARKEN")
|
|
Home -> Sailboat -> Blocks->Line/Wire High-Strength Blocks
Lightweight, low-friction blocks with hi-load composite bearings carry wire halyards and control line cascades. Side load balls minimize friction from twisting or unfair leads on 304. 300s have thrust washers. Cheek blocks come with fasteners. Sheave: Teflon impregnated Hardkote anodized aluminum. Sheave Size: 1" (25mm), 1-1/2" (38mm), 2" (51mm). Line Diameter: 1" sheave - 3/32"; 1 1/2 sheave - 1/8"; 2"sheave - 3/16".
Part No: 466
|
|
|
|
Home -> Clothing Accessories -> Gloves -> Sailing Gloves->Reflex Full-Finger Perfomance Gloves
A responsive performance sailing glove designed for active line handling in all conditions. Sticky, abrasion-resistant Black Magic® palm and finger wraps provide superior grip, while maintaining dexterity and freedom of movement. Stretch-woven material .
Part No: BLACK-M
|
|
|
|
Home -> Sailboat -> Winches->Two-Speed Self-Tailing Winches
More bearings and pawls combined with Italian styling—better form and function Harken’s precision winches are extremely reliable and exceptionally efficient. Built to very fine tolerances, these winches feature large roller bearings on most gears and drive shafts. Use single-speed winches for sheets on small boats and for halyards on medium and large boats. Use small two-speed winches for sheets and halyards on boats of all sizes. Winches as small as the 48 have roller bearings in every gear.
Part No: B40.2STA
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers->Cam Bases
Swivels ride on two rows of ball bearings for smooth, effortless pivoting even under high loads. Use #144 and #205 for mainsheets on dinghies and small offshore boats. #144 has a tall arm for use with bigger blocks. The low-profile 205 is used at the deck level and when smaller blocks are used.
Part No: 238
|
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers->Cam Bases
Swivels ride on two rows of ball bearings for smooth, effortless pivoting even under high loads. Use #144 and #205 for mainsheets on dinghies and small offshore boats. #144 has a tall arm for use with bigger blocks. The low-profile 205 is used at the deck level and when smaller blocks are used.
Part No: 240
|
|
|
|
|
Home -> Sailboat -> Blocks->Micro Blocks
Extremely lightweight, free running blocks. Designed for any number of uses on dinghies and for lightly-loaded control lines on boats of all sizes (inside masts and booms, lead car returns, tackle, etc. ). Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size 7/8" (22mm) . Line Dia: 1/4" max. . Cheek Material/Finish: Polished 316 stainless . Shackle/Strap Type: Fixed loop, loop with shackle .
Part No: 225
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang
Makes it simple to reduce sail. Harken has simplified the single line mainsail reefing kit developed from Garry Hoyt’s patented concept making this kit lighter and easier to install. A must for single handers or shorthanded sailing. Reefing with the kit is simple: ease the halyard to a predetermined mark, tension the reefing line, and re-trim the sail. For boats to 27'. Everything you need for installation is included except the line, a cleat and stopper. Ideal for boats from 22' to 27' (6.
Part No: 430
|
|
|
|
|
Home -> Sailboat -> Blocks->16mm AirBlocks®
AirBlocks have a lightweight design and a unique patented bearing system which uses stainless steel balls in a captive, grooved race. Very high working loads in an extremely lightweight block, with the best strength-to-weight ratios around. Sheave: Delrin. Sheave Size: 5/8" (16mm). Ball Bearings: Stainless. Line Diameter: 7/32" max.
Part No: 408
|
|
|
|
Home -> Sailboat -> Blocks->Snatch Blocks
null.
Part No: 1600
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Small Boat Captive Ball (CB) Traveler Cars
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Boat Size: Dinghies, multihulls, to small offshore boats. Material: One-piece solid aluminum . Shackle: Pivoting toggle models—fasten control blocks directly to post without needing a shackle. Sheave: Fixed sheave models—mainsheet loads 40° or less from vertical.
Part No: 2731
|
|
|
|
Home -> Sailboat -> Blocks->75mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 2665
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Mainsheet Traveler->Small Boat Traveler Track & Accessories
Accepts all Harken Small Boat cars. Use low-beam when track is supported at each fastener hole. High-beam can span unsupported areas. Holes on 100mm centers.
Part No: 2722
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Battcar Batten Traveler Systems, System AA Components
For Boats Under 35' Batten Traveler Systems replace conventional sail slugs with ball bearing traveler cars to handle the compression loads from full-length battens. The main becomes easier to hoist and lower, and won’t damage the sail track. Add a lazy jack system, and raising or lowering your mainsail becomes a single person operation. Battcar systems also improve sailing performance, because they do not require the sail to be cut flat, or reduce the size of the roach, as with other systems.
Part No: 3816
|
|
|
