Top Sellers
Stern Rail Outboard Motor Mount - Aluminum for 1-1/4" Railings from EDSON CORPORATION
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.
|
Braided Polyester Cord, by the Foot from NEW ENGLAND ROPES
A low-stretch cord that’s great for flag halyards, foredeck netting, or light-air spinnaker sheets. Sold by the foot. Diameter: 1/8". Best use: Utility cord, flag halyards . Construction: Braided polyester . Breaking strength: 530lb. . Stretch: 3% at 15% of breaking strength .
|
50' Braided Polyester Cord from NEW ENGLAND ROPES
A low-stretch cord that’s great for flag halyards, foredeck netting, or light-air spinnaker sheets. Length: 50'. Diameter: 1/8". Best use: Utility cord, flag halyards . Construction: Braided polyester . Breaking strength: 530lb. . Stretch: 3% at 15% of breaking strength .
|
1/8" NPT X 5/16" Brass hose barb from MOELLER
1/8 NPT X 5/16" Brass hose barbs with male threads.
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
Flipper Pump from WHALE PUMPS
Easy back-and-forth action produces one-way discharge. Spout swivels. Made of nylon, aluminum and synthetic rubber. For 1/2"ID hose. Material: Nylon, aluminum, rubber . Capacity: 2gpm . Dimensions: 7-1/8"H x 6"dia. . Cutout Size: 2". Clearance: 4-1/2" .
|
#809 Notched Spreader from WEST SYSTEM
4'' x 4'' plastic spreader with 1/8'', 3/16'' and 1/4'' notches on three sides for quickly applying modified epoxy at a constant thickness.
|
1/8" Single Braid, 2300lb. Breaking Strength, Green from SAMSON ROPE
The high-strength, low-stretch equivalent to wire rope with seven times less weight! Combined with flex-fatigue and service life durability, Amsteel 12-strand Dyneema SK-75 single braid can outlast wire rope and has none of the handling and safety issues associated with wire. Stretch: 0. 70% at 20% of breaking strength. Best Use: Cascade systems, replacements for wire halyards, tapered sheets, backstays, runners, checkstays and strong ultralight rigging . Construction: 12-strand single braid .
|
Gusher MKIII Cabinet-Mount Foot Pump, Right-Handed from WHALE PUMPS
This surface-mounted pump can be placed inside or outside a locker. Discharges on each stroke and self-primes (to 7' max. height). Offered in “Right” and “Left” configurations to suit installation clearance requirements. For freshwater or saltwater. gpm: 4. 3 . Dimensions: 5-1/8"H x 5"W x 3-5/8"L (excludes 4-1/8" foot pedal) .
|
Rim Latch Sets - Reverse Bevel with Flush Strike from PERKO
Chrome-plated zinc. Sliding lock button. Case size: 2 1/8'' x 1 3/4''. Escutcheon Size: 4 3/8'' x 1 1/4''. For Door: 5/8'' to 1 3/8''.
|
Selma Splicing Fids Set from SAMSON ROPE
Stainless steel fids make burying line much easier. Work with 1/8"–7/16" single braids or 1/4"–9/16" double braids.
|
Solid Brass Vertical Action Galley Pump from FYNSPRAY
Vertical plunger pump with a gracefully arched spout. 50 strokes per gallon. 1"diameter tube. Fits 1/2"–5/8" hose. Requires 8 1/2" clearance below counter surface; 9 3/4" above Material: Brass. Capacity: 50 strokes/gal. Dimensions: 9 3/4"H. Cutout Size: 1 1/8". Clearance: 8 1/2".
|
Gusher 10 Pump from WHALE PUMPS
Die-cast, epoxy-coated, anodized alloy, synthetic neoprene rubber diaphragm and stainless steel. Removable stainless handle with lanyard. To complete the installation, select either the Aluminum or Plastic Thru-Deck Kit, which seal the installation against water intrusion and and give it a finished look. Nitrile Diaphragm Kit, AK3714, available through special order. Material: Anodized aluminum . Dimensions: 8"H x 4-1/8"W x 5-3/4"L . Port Sizes: 1-1/2" .
|
Flush Cup Door Latch from PERKO
Chrome plated zinc alloy with sliding lock button. For door thickness 3/4 to 1-1/8 inches. Supplied with black plastic spacer for surface mounting. Bevel/Strike Type: Regular w/Box. Case Dimensions: 2-1/8 x 1-3/4 .
|
|
from HARKEN, SWL from HARKEN, 1, #1 & 1, 1-1, 8"W from HARKEN, 32IN from HARKEN
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Big Boat Track & Accessories
Harken’s Big Boat Traveler Track is available in low-beam and high-beam configurations.
Part No: 3158
|
|
|
|
Home -> Sailboat -> Blocks->29mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 353
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Main Reefing & Furling
It installs permanently on the boom and allows you to instantly attach your sail in high wind and waves.
Part No: 394
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Furling Accessories->Carbo Furling Lead Block Assemblies
These stanchion lead blocks have free-rolling ball bearings to lead line aft for safe furling from the cockpit. Use the 7401 40mm block on the bow pulpit as an inboard lead. The 7402 features a ratchet to control spooling when unfurling. The 7401 and 7402 have ball and socket bases to align blocks for smooth leads aft. The 7403 has a 29mm sheave and allows the furling line to travel outboard of the stanchion to keep the side deck clear. Mounts to stanchion with a four-screw clamp.
Part No: 7404
|
|
|
|
Home -> Sailboat -> Blocks->57mm Carbo Ratchamatic Blocks
Control loaded lines with ease The 57mm and 75mm Carbo Ratchamatic blocks are adjustable for use in many applications and weather conditions. This load-sensing ratchet block rolls freely in both directions under low loads, then engages the ratchet automatically as loads increase. Great for asymmetrical spinnakers when you need tough holding power and a quick release. Sheave Size: 1-9/16" (40mm). Ball Bearings: Engineered plastic in fitted ball races. Line Diameter: 3/8" .
Part No: 2626
|
|
|
|
Home -> Sailboat -> Blocks->75mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 2661
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Mainsheet Traveler->Small Boat Traveler Track & Accessories
Accepts all Harken Small Boat cars. Use low-beam when track is supported at each fastener hole. High-beam can span unsupported areas. Holes on 100mm centers.
Part No: 2720.1.2M
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Mainsheet Traveler->Small Boat Traveler Track & Accessories
Accepts all Harken Small Boat cars. Use low-beam when track is supported at each fastener hole. High-beam can span unsupported areas. Holes on 100mm centers.
Part No: 2720.1.8M
|
|
|
|
|
Home -> Sailboat -> Blocks->29mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 348
|
|
|
|
Home -> Sailboat -> Blocks->40mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 2644
|
|
![1-1/2" Cheek, 1,500lb. SWL, 1.3oz. from HARKEN]( "1-1/2\" Cheek, 1,500lb. SWL, 1.3oz. from HARKEN")
|
|
Home -> Sailboat -> Blocks->Line/Wire High-Strength Blocks
Lightweight, low-friction blocks with hi-load composite bearings carry wire halyards and control line cascades. Side load balls minimize friction from twisting or unfair leads on 304. 300s have thrust washers. Cheek blocks come with fasteners. Sheave: Teflon impregnated Hardkote anodized aluminum. Sheave Size: 1" (25mm), 1-1/2" (38mm), 2" (51mm). Line Diameter: 1" sheave - 3/32"; 1 1/2 sheave - 1/8"; 2"sheave - 3/16".
Part No: 305
|
|
|
|
Home -> Sailboat -> Blocks->Mast Base Lead Blocks
For leading lines aft and over cabin tops or coamings. Narrow sheave carriers permit mounting several in a small area. Low lead profile keeps lines close to the deck. Standard block features a stainless shell, Delrin sheaves and roller bearings. High-load blocks have aluminum sheaves with ball bearings and Teflon-composite bushings designed to carry the high static loads of halyards. Sheave: 1-3/4". Sheave Size: 1986: 1-3/4" (44mm); 1988 & 3002: 2-1/4" (57mm).
Part No: 1986
|
|
|
|
Home -> Sailboat -> Winches->One- & Two-Speed Non-Self-Tailing Winches
More bearings and pawls combined with Italian styling—better form and function Harken’s precision winches are extremely reliable and exceptionally efficient. Built to very fine tolerances, these winches feature large roller bearings on most gears and drive shafts. Use single-speed winches for sheets on small boats and for halyards on medium and large boats. Use small two-speed winches for sheets and halyards on boats of all sizes. Winches as small as the 48 have roller bearings in every gear.
Part No: B16.2A
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Midrange Control Black Accessories
Midrange traveler end controls allow installation of traveler purchase from 2:1 to 4:1, fastening directly to the track without extra holes in the deck.
Part No: 1512
|
|
|
|
Home -> Safety -> Man Overboard Gear->Crew Overboard Pole Accessory - Backstay Mount Sleeve
Blue acrylan flag sleeve for the Backstay mount crew overboard pole (Model 317883).
Part No: 156003
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers->Micro Cam Cleats & Accessories
Delrin® ball bearings allow pawls to open and close effortlessly under both high and low loads; just pull the line straight down, and the cam opens and holds perfectly. Cam-Matics® Cam-Matics feature Hardkote anodized aluminum pawls, three rows of ball bearings (two on the 338), and are designed for high-load, high wear applications. Carbo-Cams® Perfect for racing boats. X-Treme Angle Fairleads Allows releasing and recleating at angles up to 90° to the cleat, unlike any other fairlead.
Part No: 424R
|
|
|
|
|
Home -> Sailboat -> Blocks->Mast Base Lead Blocks
For leading lines aft and over cabin tops or coamings. Narrow sheave carriers permit mounting several in a small area. Low lead profile keeps lines close to the deck. Standard block features a stainless shell, Delrin sheaves and roller bearings. High-load blocks have aluminum sheaves with ball bearings and Teflon-composite bushings designed to carry the high static loads of halyards. Sheave: 1-3/4". Sheave Size: 1986: 1-3/4" (44mm); 1988 & 3002: 2-1/4" (57mm).
Part No: 1988
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->Terminals For MKIII Unit 1 &1.5 Furlers
MkIII jib reefing and furling systems are strong, lightweight and aerodynamic, featuring free-rolling Torlon® bearings, computer-designed stacked bearing races, and large diameter drums for easy reefing and furling. Free-spinning high-strength Air Swivels reduce weight aloft to minimize pitching and heeling. Deep penetration Hardkote anodizing ensures years of corrosion resistance. Boat Size: 28' to 36' (8. 3 - 11m) . Headstay Length: Standard 45'8" (13. 92m); max 52'8" (16.
Part No: 818
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Small Boat Captive Ball (CB) Traveler Cars
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Boat Size: Dinghies, multihulls, to small offshore boats. Material: One-piece solid aluminum . Shackle: Pivoting toggle models—fasten control blocks directly to post without needing a shackle. Sheave: Fixed sheave models—mainsheet loads 40° or less from vertical.
Part No: 176
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->Bullet Blocks
Available in a wide range of designs, bullet blocks are the foundation of the Harken line, and are adaptable to almost all control line applications. Ideal for cunninghams, vangs, outhauls, traveler controls, spinnaker controls, barberhaulers, etc. Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size: 1 1/8" (29mm) . Line Dia: 5/16" max. . Cheek Material/Finish: Plastic with stainless strap . Cleat: 094, 095, 291- 423 Carbo-Cam® .
Part No: 082
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Furling Accessories->Twin Groove Carbo Racing Foil Kits
Carbo Racing Foil material is 15% lighter than PVC, and is very low in friction, making hoists, douses, and sail changes faster. Impact resistance is increased, with less damage from spinnaker poles, especially in cold weather. The black color provides superior UV protection, and is easy to see against a light sky, making the jib trimmer’s job easier. Installation is simple, because the Carbo Foil uncoils and straightens. The foil snaps onto the stay easily, and can be done with the mast up.
Part No: 7001.16M
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Battcar Batten Traveler Systems, System A Components
Add a lazy jack system, and raising or lowering your mainsail becomes a single person operation. Battcar systems also improve sailing performance, because they do not require the sail to be cut flat, or reduce the size of the roach, as with other systems. They make mainsail handling safer, by allowing you to raise or lower the sail with practically no effort at all, even with the sail powered up. At the inboard end of every batten, special ball bearing or slider Battcars move along the track.
Part No: 3807
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Mainsheet Traveler->Midrange Captive Ball Traveler Cars
Recirculating ball-bearing travelers move freely under non-vertical loads and have a low-profile design. Captive balls allow easy installation. Built for high loads on offshore cruisers and racers. Toggle cars are designed with low pivot points for efficient load transfer and serve as a stand-up for mainsheets. Application: Mainsheet systems, offshore boats 27' to 34'. Ball Bearings: Recirculating captive Torlon bearings in open races. 1617, 1618. Material: Machined one-piece aluminum car.
Part No: 1635
|
|
|
|
Home -> Sailboat -> Blocks->40mm Carbo Ratchet Blocks
Control loaded lines with ease Lightweight Carbo Ratchets are available in 40mm, 57mm, and 75mm sizes. The 40mm blocks are perfect for jibsheets and spinnakers on small dinghies where size and weight are critical. 57mm and 75mm sizes have many configurations to fit jibsheets, spinnakers, and mainsheet systems on boats ranging from dinghies to large sportboats. The Cheek Block is also switch-controlled. The 40mm cam-arm versions work in ratchet mode only. Sheave Size: 1-9/16" (40mm).
Part No: 2610
|
|
|
|
Home -> Sailboat -> Headsail Furling->MKIV Unit 0 Furlers
Installation is easy: C-shaped open connectors with low-friction plastic isolators slip onto the headstay wire and into the foil without the need to cut your headstay. The foil's twin grooves and smooth feeder allow fast hoists, douses, and sail changes—ideal for club racing. The Harken toggle assembly accepts standard turnbuckles using swage, rod, Norseman or Sta-Lok terminals, or fits directly to a marine eye and the turnbuckle body is accessible for adjustment by raising the drum.
Part No: 7410.10 3/8
|
|
|
|
Home -> Clothing Accessories -> Gloves->Reflex 3/4 - Finger Perfomance Gloves
A responsive performance sailing glove designed for active line handling in all conditions. Sticky, abrasion-resistant Black Magic® palm and finger wraps provide superior grip, while maintaining dexterity and freedom of movement. Stretch-woven material .
Part No: BLACK-S
|
|
|
|
|
Home -> Sailboat -> Blocks->57mm Carbo Ratchamatic Blocks
Control loaded lines with ease The 57mm and 75mm Carbo Ratchamatic blocks are adjustable for use in many applications and weather conditions. This load-sensing ratchet block rolls freely in both directions under low loads, then engages the ratchet automatically as loads increase. Great for asymmetrical spinnakers when you need tough holding power and a quick release. Sheave Size: 1-9/16" (40mm). Ball Bearings: Engineered plastic in fitted ball races. Line Diameter: 3/8" .
Part No: 2144
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->Midrange Blocks
Great for mainsheet or spinnaker blocks and control lines on offshore yachts. Robust construction handles high loads. Ball-bearing sheaves minimize friction. Beefier posts and wrap-around straps create much higher working loads. Three-way head system permits blocks to swivel or be fixed side-to-side or fore-and-aft. Beckets are removable. Where applicable, blocks use 1/4" fasteners. Ball Bearings: Torlon high-load ball bearings in fitted races. Line Diameter: 9/16" max.
Part No: 1560
|
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers->Standard Cam Cleats and Accessories
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
Part No: 425G
|
|
|
|
Home -> Sailboat -> Blocks->Big Bullet Blocks
Can be used as main or jib sheet blocks on dinghies, or for control line applications, such as travelers, cunninghams or boom vangs on offshore boats. Where applicable, blocks use #10 fasteners. Sheave: Delrin. Sheave Size: 1-1/2" (38mm). Ball Bearings: Delrin. Line Diameter: 3/8" . Cheek Material/Finish: Plastic/stainless straps.
Part No: 141
|
|
|
