Top Sellers
Silicone Spray Lubricant - 9oz. from CRC CHEMICALS
Protective spray with a variety of uses onboardLubricates rubber, metals, canvas, leather, nylon and wood. Restores, protects and preserves rubber. Non-staining. 7. 5fl. oz. spray. 7. 5oz.
|
5/16" BBB Chain, 1900lb. SWL, 7600lb. Breaking Strength, 1.2lb./ft., 550' Standard Pack from ACCO CHAIN
Bulk Chain We stock a complete selection of I. standard chain from Acco to fit almost any windlass. chain vendors. When comparing Acco chain to other brands, be sure to ask if other models are “hot-dip. ” Remember that the Safe Working Load (SWL) is a conservative rating for safety and should not be exceeded, although the breaking strength is generally 3–4 times greater. BBB is made of low-carbon steel, but has shorter, calibrated links that are designed to be compatible with many windlasses.
|
Sports Horn from FALCON SAFETY PRODUC
Great for emergency signaling in fog or rescue situations! Ideal for coaches, sports officials, camp counselors, lifeguards and referees, while also meeting the needs of sports enthusiasts. 100% ozone safe, flammable isobutane propellant. Rugged, high impact plastic trumpet-guaranteed unbreakable. Removable trumpet for easy transport and storage. Refills readily available. Made in USA. Maximum Decibels: 130 dB . Size: 11" tall. Refill Size: 5. 5oz. .
|
Falcon Sports Horn Refill from FALCON SAFETY PRODUC
Great for emergency signaling in fog or rescue situations! Ideal for coaches, sports officials, camp counselors, lifeguards and referees, while also meeting the needs of sports enthusiasts. 100% ozone safe, flammable isobutane propellant. Rugged, high impact plastic trumpet-guaranteed unbreakable. Removable trumpet for easy transport and storage. Refills readily available. Made in USA. Maximum Decibels: 130 dB . Size: 11" tall. Refill Size: 5. 5oz. .
|
7/16" G40 Chain, 7200lb. SWL, 21,600lb. Breaking Strength, 2.05lb./ft., 300' Standard Pack from ACCO CHAIN
Hot-Dipped galvanized Grade 40 HT Acco anchor chain! An industry standard, hot-galvanized, high-tensile anchor chain combines both high tensile strength and is resistance to wear. Meets ISO standards . Calibrated to ensure the proper fit for your windlass. 7200 lbs.
|
Spray Nine All-Purpose Cleaner - Gallon from KNIGHT'S MARINE
All-purpose cleanerHeavy-duty all-purpose cleaner and degreaser is nontoxic, nonflammable and biodegradable. 25oz.
|
|
|
Fiberglass Cloth - Density (6 OZ), 60"W, Bulk from WEST MARINE
Suitable for a wide variety of building jobsMedium-density (6oz. ) E-glass. Use with polyester or epoxy resin for light building jobs, covering large areas or reinforcement when laying up or repairing a damaged area. Most commonly used fabric for repair and light building jobs. Medium-density (6oz. ) fiberglass cloth is ideal for covering large areas.
|
Power Tune Engine Cleaner, 13 oz. from MERCURY MARINE
Dissolve gum, varnish, deposits and clogs in the fuel system and combustion chambersScrub carburetors and injectors clean with this detergent cocktail of solvents and motor oil. Fast-acting chemical dissolves gum, varnish, deposits and clogs in the fuel system and combustion chambers. For 2- and 4-cycle engines. 13oz.
|
|
|
1/4" Dia. Stamped Halyard Shackle, 1,000SWL from SCHAEFER
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.
|
Large Dinghy Snatch Block, 9/16" Line Dia., 40mm Sheave Dia., 1300 SWL from HOLT ALLEN
Glass-filled nylon cheeks with 316 stainless straps increase working efficiency more than 50% with minimal weight increase. Stainless ball bearings in a polypropylene cassette. For spinnaker sheet, jib sheet turning blocks, etc. Cheek Material/Finish: Glass filled nylon. Ball Bearing: Stainless ball bearings. Opening: Hinged cheek/axle.
|
|
|
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.
|
|
44oz, 75oz, 6oz, 0oz, 5oz, 13oz, 0oz, 25oz, 5oz, SWL from HARKEN, 800lb, 700lb, 1250lb, 1125lb
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Mainsheet Traveler->Traveler Kits
These kits take the confusion out of installing a traveler. Includes components for the most popular Small Boat and Midrange traveler configurations. Kit contains a car, control blocks for the car, and control blocks for the track ends. Small Boat Traveler Kit: Includes 2743 double-cheek blocks, 348 single-fixed blocks on 2735 car with pivot toggle. Midrange Boat Traveler Kit: Includes 1627 car, two 1633 double0sheave end controls with Carbo-Cam cleats, two 342 double-swivel blocks.
Part No: 2739
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Mainsheet Traveler->Small Boat Traveler Controls
These end controls fit on all Harken Small Boat track. Low-profile, high-strength and lightweight, these can be used in 2:1, 3:1 or 4:1 purchase systems. Easy installation with the turn of a screw. Sold in pairs. Track Type: Fits all Small Boat track. Material: One-piece aluminum base. Ball Bearings: Carbon-black Delrin. Sheave Size: 1-1/8" (29mm). Length: 3-7/16" (87mm).
Part No: 2740
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Mainsheet Traveler->Small Boat Windward Sheeting Traveler Cars
A patented slider mechanism allows cars to be pulled to windward without releasing the leeward control line. Windward sheeting cars stay in place during tacks. Makes racing short-handed a lot more fun. Indicated use is based upon monohulls with end-boom travelers. Track Type: Small Boat CB Track: 2720, 2721, 373, 374, 2725, 2751. Block Type: Uses 2740 Control Blocks. Cleat Type: Modified 150 Cam-Matic. Shackle: Pivoting shackle. Cam: Leeward cleat opens automatically. Purchase: 2:1/3:1.
Part No: 2744
|
|
|
|
Home -> Sailboat -> Blocks->16mm AirBlocks®
AirBlocks have a lightweight design and a unique patented bearing system which uses stainless steel balls in a captive, grooved race. Very high working loads in an extremely lightweight block, with the best strength-to-weight ratios around. Sheave: Delrin. Sheave Size: 5/8" (16mm). Ball Bearings: Stainless. Line Diameter: 7/32" max.
Part No: 376
|
|
|
|
Home -> Sailboat -> Blocks->75mm Carbo Ratchet Blocks
Control loaded lines with ease Lightweight Carbo Ratchets are available in 40mm, 57mm, and 75mm sizes. The 40mm blocks are perfect for jibsheets and spinnakers on small dinghies where size and weight are critical. 57mm and 75mm sizes have many configurations to fit jibsheets, spinnakers, and mainsheet systems on boats ranging from dinghies to large sportboats. The Cheek Block is also switch-controlled. The 40mm cam-arm versions work in ratchet mode only. Sheave Size: 1-9/16" (40mm).
Part No: 2671
|
|
|
|
Home -> Sailboat -> Blocks->75mm Carbo Ratchamatic Blocks
Control loaded lines with ease The 57mm and 75mm Carbo Ratchamatic blocks are adjustable for use in many applications and weather conditions. This load-sensing ratchet block rolls freely in both directions under low loads, then engages the ratchet automatically as loads increase. Great for asymmetrical spinnakers when you need tough holding power and a quick release. Sheave Size: 1-9/16" (40mm). Ball Bearings: Engineered plastic in fitted ball races. Line Diameter: 3/8" .
Part No: 2686
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Furling Accessories->Carbo Furling Lead Block Assemblies
These stanchion lead blocks have free-rolling ball bearings to lead line aft for safe furling from the cockpit. Use the 7401 40mm block on the bow pulpit as an inboard lead. The 7402 features a ratchet to control spooling when unfurling. The 7401 and 7402 have ball and socket bases to align blocks for smooth leads aft. The 7403 has a 29mm sheave and allows the furling line to travel outboard of the stanchion to keep the side deck clear. Mounts to stanchion with a four-screw clamp.
Part No: 7403
|
|
|
|
Home -> Clothing Accessories -> Gloves -> Sailing Gloves->Reflex Full-Finger Perfomance Gloves
A responsive performance sailing glove designed for active line handling in all conditions. Sticky, abrasion-resistant Black Magic® palm and finger wraps provide superior grip, while maintaining dexterity and freedom of movement. Stretch-woven material .
Part No: BLACK-2X
|
|
|
|
Home -> Sailboat -> Blocks->57mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 2618
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->Midrange Blocks
Great for mainsheet or spinnaker blocks and control lines on offshore yachts. Robust construction handles high loads. Ball-bearing sheaves minimize friction. Beefier posts and wrap-around straps create much higher working loads. Three-way head system permits blocks to swivel or be fixed side-to-side or fore-and-aft. Beckets are removable. Where applicable, blocks use 1/4" fasteners. Ball Bearings: Torlon high-load ball bearings in fitted races. Line Diameter: 9/16" max.
Part No: 1545
|
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->Midrange Blocks
Great for mainsheet or spinnaker blocks and control lines on offshore yachts. Robust construction handles high loads. Ball-bearing sheaves minimize friction. Beefier posts and wrap-around straps create much higher working loads. Three-way head system permits blocks to swivel or be fixed side-to-side or fore-and-aft. Beckets are removable. Where applicable, blocks use 1/4" fasteners. Ball Bearings: Torlon high-load ball bearings in fitted races. Line Diameter: 9/16" max.
Part No: 1540
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling
The Unit 00AL is the perfect furling and reefing system for small cruisers, combining most of the features of larger Harken systems, but in a simpler unit. Large bearing diameter minimizes friction, needing no lubrication or isolating seals, and the large-diameter drum provides lots of mechanical advantage for easy furling. A double-grooved foil allows for racing sail changes, but is only 3/4" wide and 1" long. Headstay Length: Standard 31'6" (9. 60m); Max. 35' (10.
Part No: 1110
|
|
|
|
Home -> Sailboat -> Blocks->Rope/Wire Bullet Blocks
Designed for vangs, outhauls, shrouds where wire is used or for rope where loads are too high for regular bullet blocks. Roller bearings handle high loads better than ball bearings. Where applicable, blocks use #10 fasteners. Sheaves are aluminum for strength. Sheave: Teflon® impregnated Hardkote anodized aluminum . Bearings: Delrin® roller bearings . Sheave Size: 1-1/8" (29mm) . Line Dia. 5/16" max. . Cheek Material/Finish: Plastic with stainless strap .
Part No: 109
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers->Cam Bases
Swivels ride on two rows of ball bearings for smooth, effortless pivoting even under high loads. Use #144 and #205 for mainsheets on dinghies and small offshore boats. #144 has a tall arm for use with bigger blocks. The low-profile 205 is used at the deck level and when smaller blocks are used.
Part No: 205
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->Micro Blocks
Extremely lightweight, free running blocks. Designed for any number of uses on dinghies and for lightly-loaded control lines on boats of all sizes (inside masts and booms, lead car returns, tackle, etc. ). Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size 7/8" (22mm) . Line Dia: 1/4" max. . Cheek Material/Finish: Polished 316 stainless . Shackle/Strap Type: Fixed loop, loop with shackle .
Part No: 292
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->Bullet Blocks
Available in a wide range of designs, bullet blocks are the foundation of the Harken line, and are adaptable to almost all control line applications. Ideal for cunninghams, vangs, outhauls, traveler controls, spinnaker controls, barberhaulers, etc. Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size: 1 1/8" (29mm) . Line Dia: 5/16" max. . Cheek Material/Finish: Plastic with stainless strap . Cleat: 094, 095, 291- 423 Carbo-Cam® .
Part No: 094
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Mainsheet Traveler->Midrange Control Blocks
Assemblies easily fasten to the track without additional holes in the boat. Bases and cam arms are machined from a single piece of aluminum for durability and a clean look. End control sheaves are 40mm Carbo blocks with free-running ball bearings to ensure cars adjust easily under load and release instantly in a gust. For angled cleating install the 380 X-treme Angle Fairlead. An integral dead-end terminates control lines. The 1661 or 1638 stand-up toggle holds blocks in a upright position.
Part No: 1632
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Mainsheet Traveler->Midrange Traveler Track & Accessories
Midrange track is available in low-beam or high-beam configurations. Use high-beam track to span a cockpit or other unsupported area. Choose between variable hole spacing and drilled track. Holes in metric drilled track are on 100mm centers. Use 1/4” (6mm) FHMS fasteners. End stops sold separately. Add 1522 or 1523 Heavy Duty End Stops (sold in pairs, fasteners not included) when end control assemblies are not used. Low-beam track measures 9/16" (14mm)H x 1 1/16" (27mm)W.
Part No: 1621
|
|
![1" Single with Becket, 1,000lb. SWL, 1.25oz. from HARKEN]( "1\" Single with Becket, 1,000lb. SWL, 1.25oz. from HARKEN")
|
|
Home -> Sailboat -> Blocks -> Blocks->Line/Wire High-Strength Blocks
Lightweight, low-friction blocks with hi-load composite bearings carry wire halyards and control line cascades. Side load balls minimize friction from twisting or unfair leads on 304. 300s have thrust washers. Cheek blocks come with fasteners. Sheave: Teflon impregnated Hardkote anodized aluminum. Sheave Size: 1" (25mm), 1-1/2" (38mm), 2" (51mm). Line Diameter: 1" sheave - 3/32"; 1 1/2 sheave - 1/8"; 2"sheave - 3/16".
Part No: 312
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Mainsheet Traveler->Midrange Traveler Track & Accessories
Midrange track is available in low-beam or high-beam configurations. Use high-beam track to span a cockpit or other unsupported area. Choose between variable hole spacing and drilled track. Holes in metric drilled track are on 100mm centers. Use 1/4” (6mm) FHMS fasteners. End stops sold separately. Add 1522 or 1523 Heavy Duty End Stops (sold in pairs, fasteners not included) when end control assemblies are not used. Low-beam track measures 9/16" (14mm)H x 1 1/16" (27mm)W.
Part No: 1618.1.2M
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Small Boat Captive Ball (CB) Traveler Cars
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Boat Size: Dinghies, multihulls, to small offshore boats. Material: One-piece solid aluminum . Shackle: Pivoting toggle models—fasten control blocks directly to post without needing a shackle. Sheave: Fixed sheave models—mainsheet loads 40° or less from vertical.
Part No: 2735
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Mainsheet Traveler->Small Boat Windward Sheeting Traveler Cars
A patented slider mechanism allows cars to be pulled to windward without releasing the leeward control line. Windward sheeting cars stay in place during tacks. Makes racing short-handed a lot more fun. Indicated use is based upon monohulls with end-boom travelers. Track Type: Small Boat CB Track: 2720, 2721, 373, 374, 2725, 2751. Block Type: Uses 2740 Control Blocks. Cleat Type: Modified 150 Cam-Matic. Shackle: Pivoting shackle. Cam: Leeward cleat opens automatically. Purchase: 2:1/3:1.
Part No: 2745
|
|
|
|
Home -> Sailboat -> Downwind Poles & Cars -> Spinnaker Poles & Gear->Captive Ball Bearing Spinnaker Pole Cars
Now with captive ball bearings, which eliminates the need for a ball-bearing loader during installation or removal from track. These cars run freely, fit low-beam traveler track and are easy to adjust under any load.
Part No: 3188
|
|
|
|
Home -> Sailboat -> Winches -> Winch Repair Parts
Contains 10 pawls and 10 springs.
Part No: BK4512
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Main Reefing & Furling->Lazy Jack Systems
These kits contain everything for installing a simple, variable system Keep your mainsail under control and on the boom as it’s lowered. Works exceptionally well with fully-battened mains, but can also be used with conventional sails. Everything you need to install a simple, adjustable system is included in the kit: pre-swaged wires, blocks, eyestraps, line, a cleat, fasteners and instructions (including how to alter your sail cover for use with lazy jacks). 13m–3. 75m). 6' to 16' (3.
Part No: 252
|
|
|
|
Home -> Sailboat -> Winches -> Winch Handles & Holders->Ball-Bearing Winch Handles
Ball bearings allow fast, free cranking. Comfortable grip. Fits most common winches built today. Grip: Ball bearing (Double-grip Model 5252689) . Type: Locking or standard . Material: Aluminum .
Part No: B10AP
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Big Boat Car Controls
For use on offshore boats from 32’–65’. Torlon® bearings and pivoting shackles for non-vertical loads.
Part No: 548
|
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers->Cam Bases
Swivels ride on two rows of ball bearings for smooth, effortless pivoting even under high loads. Use #144 and #205 for mainsheets on dinghies and small offshore boats. #144 has a tall arm for use with bigger blocks. The low-profile 205 is used at the deck level and when smaller blocks are used.
Part No: 239
|
|
|
|
|
Home -> Sailboat -> Blocks->Micro Blocks
Extremely lightweight, free running blocks. Designed for any number of uses on dinghies and for lightly-loaded control lines on boats of all sizes (inside masts and booms, lead car returns, tackle, etc. ). Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size 7/8" (22mm) . Line Dia: 1/4" max. . Cheek Material/Finish: Polished 316 stainless . Shackle/Strap Type: Fixed loop, loop with shackle .
Part No: 227
|
|
|
|
Home -> Sailboat -> Blocks->Mast Base Lead Blocks
For leading lines aft and over cabin tops or coamings. Narrow sheave carriers permit mounting several in a small area. Low lead profile keeps lines close to the deck. Standard block features a stainless shell, Delrin sheaves and roller bearings. High-load blocks have aluminum sheaves with ball bearings and Teflon-composite bushings designed to carry the high static loads of halyards. Sheave: 1-3/4". Sheave Size: 1986: 1-3/4" (44mm); 1988 & 3002: 2-1/4" (57mm).
Part No: 3002
|
|
|
