Top Sellers
550 Fishfinder from HUMMINBIRD
Step into Big Screen Performance Fishfinding New! Features: SwitchFire™ Sonar allows two ways to view returns - Clear or Max mode. 200 kHz, 20º single beam sonar optimized for coverage and precision bottom detail. Reliable performance from shallow to 800 feet. Sonar Echo Enhancement™ Technology is so sensitive it’ll track a small jig to over 40 feet and separate targets within 2 ½ inches. Choose Selective Fish ID+™ or view actual sonar returns. Fully gasketed waterproof design and it floats.
|
500gph Rule-Mate, 24V, 1.0A Draw, 3/4" Port, 4"H x 5"W from RULE INDUSTRIES
Strainer easily removes for cleaning The unique “spongeability” feature of these quiet and compact pumps removes excess water, leaving bilge dry and reducing odors. The pumps activate only when water levels rise to 2-1/8". Enclosed non-mercury float switch. Clear debris quickly with the removable strainer and easy-access impeller area. Built-In Switch: Non-mercury float switch . Material: Plastic/stainless shaft.
|
Automatic Two-Way Antenna Selector from SHAKESPEARE
Connect two radios to one antennaThis innovative switch toggles two radios to one antenna. It mounts out of the way, because you don't have to get at it to use it. When you key the microphone on one of the radios, it switches the antenna to it. Automatically. The radio stays locked onto the antenna until the automatic switch detects a transmit signal from the other radio. Easy! Frequency Range: Up to 600 MHz. 2:1. Power Rating: 30W. Impedance: 50 ohms. Insertion Loss: Less than 1.
|
Speedmaster Reel from SHIMANO REELS
This TLD Star Drag Conventional Reel provides outstanding castability with both real and artificial baits so targeted schools of fish can be stalked from afar. Easy-to-adjust star drag . Capacity Yds. /test 360/20lb. . Gear Ratio 5. 2:1 . Weight 16. 6oz .
|
Single Sheave, No Cleat, 2:1 Purchase, 300lb. SWL from HARKEN
These end controls fit on all Harken Small Boat track. Low-profile, high-strength and lightweight, these can be used in 2:1, 3:1 or 4:1 purchase systems. Easy installation with the turn of a screw. Sold in pairs. Track Type: Fits all Small Boat track. Material: One-piece aluminum base. Ball Bearings: Carbon-black Delrin. Sheave Size: 1-1/8" (29mm). Length: 3-7/16" (87mm).
|
Mast Base Lead Block, Hi-Load, 2-1/4" Sheave Dia., 3/8" Line Dia., 2,500lb. SWL from HARKEN
For leading lines aft and over cabin tops or coamings. Narrow sheave carriers permit mounting several in a small area. Low lead profile keeps lines close to the deck. Standard block features a stainless shell, Delrin sheaves and roller bearings. High-load blocks have aluminum sheaves with ball bearings and Teflon-composite bushings designed to carry the high static loads of halyards. Sheave: 1-3/4". Sheave Size: 1986: 1-3/4" (44mm); 1988 & 3002: 2-1/4" (57mm).
|
Mast Base Lead Block, Hi-Load Over-the-Top, 2-1/4" Sheave Dia., 3/8" Line Dia., 2,500lb. SWL from HARKEN
For leading lines aft and over cabin tops or coamings. Narrow sheave carriers permit mounting several in a small area. Low lead profile keeps lines close to the deck. Standard block features a stainless shell, Delrin sheaves and roller bearings. High-load blocks have aluminum sheaves with ball bearings and Teflon-composite bushings designed to carry the high static loads of halyards. Sheave: 1-3/4". Sheave Size: 1986: 1-3/4" (44mm); 1988 & 3002: 2-1/4" (57mm).
|
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
2.25" Block, Double with Becket, 1,000lb. SWL, 9.5oz. from HARKEN
The original Harken block Used for main and jib sheets on course racing keelboats, scows and dinghies with large mains. Often used for spinnaker halyards and sheets on small offshore boats. Swivel blocks feature a three-way head system with a set screw. Blocks with cams feature adjustable cam arms and reversible cam cleats. Where applicable, blocks use #8 fasteners. Sheave: Delrin. Bearings: Delrin ball bearings. Sheave Size: 2-1/4" (57mm). Line Diameter: 7/16" max.
|
2.25" Block, Double, 1,000lb. SWL, 8.5oz. from HARKEN
The original Harken block Used for main and jib sheets on course racing keelboats, scows and dinghies with large mains. Often used for spinnaker halyards and sheets on small offshore boats. Swivel blocks feature a three-way head system with a set screw. Blocks with cams feature adjustable cam arms and reversible cam cleats. Where applicable, blocks use #8 fasteners. Sheave: Delrin. Bearings: Delrin ball bearings. Sheave Size: 2-1/4" (57mm). Line Diameter: 7/16" max.
|
Hi-Load Kit for Boat Length to 20', 950lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
2.25" Block, Single, 500lb. SWL, 4.5oz. from HARKEN
The original Harken block Used for main and jib sheets on course racing keelboats, scows and dinghies with large mains. Often used for spinnaker halyards and sheets on small offshore boats. Swivel blocks feature a three-way head system with a set screw. Blocks with cams feature adjustable cam arms and reversible cam cleats. Where applicable, blocks use #8 fasteners. Sheave: Delrin. Bearings: Delrin ball bearings. Sheave Size: 2-1/4" (57mm). Line Diameter: 7/16" max.
|
Double Control Blocks (Pair), 2-5/8" Length, 600lb. SWL from HARKEN
Midrange traveler end controls allow installation of traveler purchase from 2:1 to 4:1, fastening directly to the track without extra holes in the deck.
|
Single Control Blocks with Becket (Pair), 2-5/8" Length, 300lb. SWL from HARKEN
Midrange traveler end controls allow installation of traveler purchase from 2:1 to 4:1, fastening directly to the track without extra holes in the deck.
|
Single Sheave (Pair), 4-1/2" Length, 350lb. SWL from HARKEN
Assemblies easily fasten to the track without additional holes in the boat. Bases and cam arms are machined from a single piece of aluminum for durability and a clean look. End control sheaves are 40mm Carbo blocks with free-running ball bearings to ensure cars adjust easily under load and release instantly in a gust. For angled cleating install the 380 X-treme Angle Fairlead. An integral dead-end terminates control lines. The 1661 or 1638 stand-up toggle holds blocks in a upright position.
|
|
from HARKEN, 1, 1-1, SWL from HARKEN, XL from HARKEN, 2-1, 3-1, SWL
|
|
Sailboat -> Blocks -> Blocks->Bullet Blocks
Available in a wide range of designs, bullet blocks are the foundation of the Harken line, and are adaptable to almost all control line applications. Ideal for cunninghams, vangs, outhauls, traveler controls, spinnaker controls, barberhaulers, etc. Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size: 1 1/8" (29mm) . Line Dia: 5/16" max. . Cheek Material/Finish: Plastic with stainless strap . Cleat: 094, 095, 291- 423 Carbo-Cam® .
Part No: 084
|
|
|
|
Sailboat -> Blocks -> Blocks->Bullet Blocks
Available in a wide range of designs, bullet blocks are the foundation of the Harken line, and are adaptable to almost all control line applications. Ideal for cunninghams, vangs, outhauls, traveler controls, spinnaker controls, barberhaulers, etc. Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size: 1 1/8" (29mm) . Line Dia: 5/16" max. . Cheek Material/Finish: Plastic with stainless strap . Cleat: 094, 095, 291- 423 Carbo-Cam® .
Part No: 092
|
|
|
Sailboat -> Blocks->Little Fiddle Blocks
Like their big brothers, only for smaller 3:1 and 4:1 tackles. Hexaratchet has 10:1 holding power in one direction. Sheave: Delrin. Ball Bearings: Delrin. Sheave Size: 2-1/4" (57mm) & 1-1/2" (38mm). Line Diameter: 3/8" max. Cheek Material/Finish: Plastic with stainless straps. Shackle/Strap Type: Stamped swivel shackle.
Part No: 055
|
|
|
Sailboat -> Blocks->75mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 2664
|
|
|
Clothing Accessories -> Gloves->3/4 Finger Sailing Gloves
"They stay soft and flexible better that gloves made from Amara synthetic leather. " Perfect for Dyneema, Vectran and other synthetic line. The grip and durability of the Black Magic® palm material is superior to other sailing gloves. Nylon Spandex mesh for super fit. Minimal stretch when wet. Dries soft. Imported. Dinghy and inshore performance sailing . Configuration: 3/4-finger . Elastic wristbands, adjustable Velcro tabs . Gray/Black .
Part No: 2563XL
|
|
|
Sailboat -> Traveler, Tracks & Vang->Big Boat Track & Accessories
Harken’s Big Boat Traveler Track is available in low-beam and high-beam configurations.
Part No: 3157
|
|
|
Sailboat -> Blocks->ESP Blocks
Designed to handle the high loads generated by modern racing and cruising boats, ESP blocks feature axle bearings to ensure smooth, hitch-free performance under high load and heavy winds. Sheave: Long-glass engineered plastic, except lockoff: aluminum. Bearings: Contained-axle sleeve and carbon-black Torlon ball bearings. Sheave Size: 3" (76mm). Line Diameter: 3/4".
Part No: 6068
|
|
|
Sailboat -> Blocks->57mm Carbo Ratchet Blocks
Control loaded lines with ease Lightweight Carbo Ratchets are available in 40mm, 57mm, and 75mm sizes. The 40mm blocks are perfect for jibsheets and spinnakers on small dinghies where size and weight are critical. 57mm and 75mm sizes have many configurations to fit jibsheets, spinnakers, and mainsheet systems on boats ranging from dinghies to large sportboats. The Cheek Block is also switch-controlled. The 40mm cam-arm versions work in ratchet mode only. Sheave Size: 1-9/16" (40mm).
Part No: 2135
|
|
|
Sailboat -> Headsail Furling -> Headsail Furling->Cruising Furler Unit 2
A single-groove round foil withstands extreme reefing loads, letting you easily unfurl your headsail, furl and reef safely in a blow. The foils are easy to assemble with interlocking connectors (screws and adhesive included) built strong for years of torque-loading. The drum installs over your existing turnbuckle, adapting to a variety of rigging options. The Harken® toggle assembly accepts standard turnbuckles using swage, rod, Norseman or Sta-Lok terminals, or fits directly to a marine eye.
Part No: 7312.10 5/8.WM
|
|
|
|
Sailboat -> Blocks->75mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 2679
|
|
|
Sailboat -> Traveler, Tracks & Vang -> Mainsheet Traveler->Small Boat Traveler Track & Accessories
Accepts all Harken Small Boat cars. Use low-beam when track is supported at each fastener hole. High-beam can span unsupported areas. Holes on 100mm centers.
Part No: 2723
|
|
|
Sailboat -> Blocks->ESP Deck Organizers
Mount organizers with large fasteners directly through the sheaves. If you need an additional sheave, use the same holes and simply drill another hole to mount the longer organizer. Organizers are asymmetrical to keep them short, and may be double stacked to contain several lines in a small area. A spacer at one end keeps the outer line on the sheave. Sheave: Long-glass engineered plastic . Ball Bearings: Contained-axle sleeve bearing, carbon-black ball bearings . : 1/2" max. .
Part No: 6055
|
|
|
Sailboat -> Blocks->40mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 2652
|
|
|
Sailboat -> Blocks->29mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 343
|
|
|
Sailboat -> Blocks
Is your garage filled with so much stuff there's no room for the car? Here's a practical solution. Go Vertical! With the Harken Hoister, you can store car top recreational equipment such as kayaks, sailing dinghies and truck caps up out of the way. Best of all, you can hoist/lower these large items onto your car by yourself.
Part No: 7800
|
![2" Single, 2,000lb. SWL, 5.3oz. from HARKEN]( "2\" Single, 2,000lb. SWL, 5.3oz. from HARKEN")
|
|
Sailboat -> Blocks->Line/Wire High-Strength Blocks
Lightweight, low-friction blocks with hi-load composite bearings carry wire halyards and control line cascades. Side load balls minimize friction from twisting or unfair leads on 304. 300s have thrust washers. Cheek blocks come with fasteners. Sheave: Teflon impregnated Hardkote anodized aluminum. Sheave Size: 1" (25mm), 1-1/2" (38mm), 2" (51mm). Line Diameter: 1" sheave - 3/32"; 1 1/2 sheave - 1/8"; 2"sheave - 3/16".
Part No: 308
|
![1" Thru-Deck (13/32" x 1-17/32" cutout), 1,000lb. SWL, 1.0oz. from HARKEN]( "1\" Thru-Deck (13/32\" x 1-17/32\" cutout), 1,000lb. SWL, 1.0oz. from HARKEN")
|
|
Sailboat -> Blocks->Line/Wire High-Strength Blocks
Lightweight, low-friction blocks with hi-load composite bearings carry wire halyards and control line cascades. Side load balls minimize friction from twisting or unfair leads on 304. 300s have thrust washers. Cheek blocks come with fasteners. Sheave: Teflon impregnated Hardkote anodized aluminum. Sheave Size: 1" (25mm), 1-1/2" (38mm), 2" (51mm). Line Diameter: 1" sheave - 3/32"; 1 1/2 sheave - 1/8"; 2"sheave - 3/16".
Part No: 302
|
|
|
Sailboat -> Winches->One- & Two-Speed Non-Self-Tailing Winches
More bearings and pawls combined with Italian styling—better form and function Harken’s precision winches are extremely reliable and exceptionally efficient. Built to very fine tolerances, these winches feature large roller bearings on most gears and drive shafts. Use single-speed winches for sheets on small boats and for halyards on medium and large boats. Use small two-speed winches for sheets and halyards on boats of all sizes. Winches as small as the 48 have roller bearings in every gear.
Part No: B32.2A
|
![1-1/2" Sheave Only, 1,500lb. SWL, 1.0oz. from HARKEN]( "1-1/2\" Sheave Only, 1,500lb. SWL, 1.0oz. from HARKEN")
|
|
Sailboat -> Blocks->Line/Wire High-Strength Blocks
Lightweight, low-friction blocks with hi-load composite bearings carry wire halyards and control line cascades. Side load balls minimize friction from twisting or unfair leads on 304. 300s have thrust washers. Cheek blocks come with fasteners. Sheave: Teflon impregnated Hardkote anodized aluminum. Sheave Size: 1" (25mm), 1-1/2" (38mm), 2" (51mm). Line Diameter: 1" sheave - 3/32"; 1 1/2 sheave - 1/8"; 2"sheave - 3/16".
Part No: 307
|
|
|
Sailboat -> Traveler, Tracks & Vang -> Mainsheet Traveler->Midrange Traveler Track & Accessories
Midrange track is available in low-beam or high-beam configurations. Use high-beam track to span a cockpit or other unsupported area. Choose between variable hole spacing and drilled track. Holes in metric drilled track are on 100mm centers. Use 1/4” (6mm) FHMS fasteners. End stops sold separately. Add 1522 or 1523 Heavy Duty End Stops (sold in pairs, fasteners not included) when end control assemblies are not used. Low-beam track measures 9/16" (14mm)H x 1 1/16" (27mm)W.
Part No: 1523
|
|
|
Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Eye Straps
Stainless-Steel Eye Straps.
Part No: 201
|
|
|
Sailboat -> Blocks -> Blocks->3" Blocks
Designed for small to medium-sized offshore boats, catamarans, etc. Large diameter sheaves reduce the friction caused by bending a line over a small sheave. All feature three-way head system and removable beckets. Sheave: Hardkote anodized Teflon-impregnated aluminum. Ball Bearings: Delrin ball bearings/Hi-Load wire blocks: Torlon ball bearings. Sheave Size: 3" (76mm). Line Diameter: 7/16" max. Cheek Material/Finish: Plastic/Stainless steel.
Part No: 202
|
|
|
Sailboat -> Blocks->Micro Blocks
Extremely lightweight, free running blocks. Designed for any number of uses on dinghies and for lightly-loaded control lines on boats of all sizes (inside masts and booms, lead car returns, tackle, etc. ). Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size 7/8" (22mm) . Line Dia: 1/4" max. . Cheek Material/Finish: Polished 316 stainless . Shackle/Strap Type: Fixed loop, loop with shackle .
Part No: 226
|
|
|
|
Sailboat -> Blocks->Micro Blocks
Extremely lightweight, free running blocks. Designed for any number of uses on dinghies and for lightly-loaded control lines on boats of all sizes (inside masts and booms, lead car returns, tackle, etc. ). Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size 7/8" (22mm) . Line Dia: 1/4" max. . Cheek Material/Finish: Polished 316 stainless . Shackle/Strap Type: Fixed loop, loop with shackle .
Part No: 235
|
|
|
Sailboat -> Blocks->Big Bullet Blocks
.
Part No: 148
|
|
|
Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Shackles
Optimize the performance of your Harken blocks with these strong, stainless-steel shackles.
Part No: 2131
|
|
|
Sailboat -> Traveler, Tracks & Vang->Micro-Captive Ball Traveler Cars & Track
Strong, lightweight, solid aluminum, one-piece cars boast stainless steel-wire ball guides that keep the high-strength Torlon balls captive when the car is off the track. Sculpted car bodies reduce weight. Low-profile Micro CB track is fully-saturated Hardkote–anodized for toughness and scratch-resistance. Low-profile, line-shedding endstop absorbs sudden shock loads that can occur during unintentional jibes. Application: Mainsheet cars. Vangs on small dinghies. Controls on small keelboats.
Part No: 2704
|
|
|
|
Sailboat -> Traveler, Tracks & Vang -> Mainsheet Traveler->Small Boat Traveler Track & Accessories
Accepts all Harken Small Boat cars. Use low-beam when track is supported at each fastener hole. High-beam can span unsupported areas. Holes on 100mm centers.
Part No: 446
|
|
|
|
Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Shackles
Optimize the performance of your Harken blocks with these strong, stainless-steel shackles.
Part No: 2132
|
|
|
|
Sailboat -> Winches->One- & Two-Speed Non-Self-Tailing Winches
More bearings and pawls combined with Italian styling—better form and function Harken’s precision winches are extremely reliable and exceptionally efficient. Built to very fine tolerances, these winches feature large roller bearings on most gears and drive shafts. Use single-speed winches for sheets on small boats and for halyards on medium and large boats. Use small two-speed winches for sheets and halyards on boats of all sizes. Winches as small as the 48 have roller bearings in every gear.
Part No: B6CCA
|
|
