Top Sellers
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
RigTune Pro Digital Rig Tension Gauge from HARKEN
Old-fashioned spring gauges, like the Loos Pro, don’t provide repeatable numbers. This product does. Unlike spring-loaded gauges, the Harken Rigtune Pro measures rig tension to the nearest kilogram. A load cell records the pressure on one of the pins and the measurement is displayed on a simple, easy-to-read screen. The Rigtune Pro fits a specific range of rigging sizes, 2. As rigging is deflected over three pins on the back of the gauge, a load cell records the pressure on one of the pins.
|
Flat Cam Riser, 1"H from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
|
Replacement Ball Bearings for 150 Cam Cleat from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
|
Spinnaker Pole Car, Track #2720, 900sq.ft. Max. Sail Area, 1125lb. SWL from HARKEN
Now with captive ball bearings, which eliminates the need for a ball-bearing loader during installation or removal from track. These cars run freely, fit low-beam traveler track and are easy to adjust under any load.
|
Hi-Load Ti-Lite Car, Torlon Bearings, 850lb. SWL from HARKEN
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Boat Size: Dinghies, multihulls, to small offshore boats. Material: One-piece solid aluminum . Shackle: Pivoting toggle models—fasten control blocks directly to post without needing a shackle. Sheave: Fixed sheave models—mainsheet loads 40° or less from vertical.
|
57mm Black Magic AirBlock, High-Load Strap Head with Becket, 2,500lb. SWL, 3.6oz. from HARKEN
Strong, lightweight aluminum blocks for offshore boats Used for sheets, halyards, running backstays and control lines on offshore boats, these strong, lightweight blocks are made of sculpted aluminum with Torlon rollers and carbon black balls for strength and UV protection. Cheek Material/Finish: 6160-T6 Hardkote anodized aluminum . Sheave Size: 57mm (2-1/4") . Construction: Three fasteners for quick disassembly. Plastic isolators separate dissimilar metals. Three-way head system.
|
29mm Carbo Clew Block Assembly from HARKEN
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
|
5/16" BBB Chain, 1900lb. SWL, 7600lb. Breaking Strength, 1.2lb./ft., 550' Standard Pack from ACCO CHAIN
Bulk Chain We stock a complete selection of I. standard chain from Acco to fit almost any windlass. chain vendors. When comparing Acco chain to other brands, be sure to ask if other models are “hot-dip. ” Remember that the Safe Working Load (SWL) is a conservative rating for safety and should not be exceeded, although the breaking strength is generally 3–4 times greater. BBB is made of low-carbon steel, but has shorter, calibrated links that are designed to be compatible with many windlasses.
|
Winch Service Kit from HARKEN
Contains 10 pawls and 10 springs.
|
|
|
|
|
Midrange Four-Hole Eyestrap from HARKEN
Forged eyestraps are extremely strong and their smooth shape won’t chafe line. Stainless steel . 6000lb. Breaking load.
|
7/16" G40 Chain, 7200lb. SWL, 21,600lb. Breaking Strength, 2.05lb./ft., 300' Standard Pack from ACCO CHAIN
Hot-Dipped galvanized Grade 40 HT Acco anchor chain! An industry standard, hot-galvanized, high-tensile anchor chain combines both high tensile strength and is resistance to wear. Meets ISO standards . Calibrated to ensure the proper fit for your windlass. 7200 lbs.
|
|
|
|
from HARKEN, 63oz, 0oz, SWL from HARKEN, 584lb, 380lb, 485lb, SWL, 300lb
|
|
Home -> Sailboat -> Winches -> Winch Handles & Holders->Ball-Bearing Winch Handles
Ball bearings allow fast, free cranking. Comfortable grip. Fits most common winches built today. Grip: Ball bearing (Double-grip Model 5252689) . Type: Locking or standard . Material: Aluminum .
Part No: B10ADL
|
|
|
|
Home -> Sailboat -> Blocks->ESP Blocks
Designed to handle the high loads generated by modern racing and cruising boats, ESP blocks feature axle bearings to ensure smooth, hitch-free performance under high load and heavy winds. Sheave: Long-glass engineered plastic, except lockoff: aluminum. Bearings: Contained-axle sleeve and carbon-black Torlon ball bearings. Sheave Size: 3" (76mm). Line Diameter: 3/4".
Part No: 6094
|
|
|
|
Home -> Sailboat -> Headsail Furling->MKIV Unit 2 Furler Accessories
Connectors, extra extrusions and link plates for MKIV Furler Unit 2.
Part No: 7412.31
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Furling Accessories->Twin Groove Carbo Racing Foil Kits
Carbo Racing Foil material is 15% lighter than PVC, and is very low in friction, making hoists, douses, and sail changes faster. Impact resistance is increased, with less damage from spinnaker poles, especially in cold weather. The black color provides superior UV protection, and is easy to see against a light sky, making the jib trimmer’s job easier. Installation is simple, because the Carbo Foil uncoils and straightens. The foil snaps onto the stay easily, and can be done with the mast up.
Part No: 7001.12M
|
|
|
|
Home -> Sailboat -> Blocks->75mm Carbo Ratchamatic Blocks
Control loaded lines with ease The 57mm and 75mm Carbo Ratchamatic blocks are adjustable for use in many applications and weather conditions. This load-sensing ratchet block rolls freely in both directions under low loads, then engages the ratchet automatically as loads increase. Great for asymmetrical spinnakers when you need tough holding power and a quick release. Sheave Size: 1-9/16" (40mm). Ball Bearings: Engineered plastic in fitted ball races. Line Diameter: 3/8" .
Part No: 2681
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Small Boat Captive Ball (CB) Traveler Cars
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Boat Size: Dinghies, multihulls, to small offshore boats. Material: One-piece solid aluminum . Shackle: Pivoting toggle models—fasten control blocks directly to post without needing a shackle. Sheave: Fixed sheave models—mainsheet loads 40° or less from vertical.
Part No: 2729
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Small Boat Captive Ball (CB) Traveler Cars
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Boat Size: Dinghies, multihulls, to small offshore boats. Material: One-piece solid aluminum . Shackle: Pivoting toggle models—fasten control blocks directly to post without needing a shackle. Sheave: Fixed sheave models—mainsheet loads 40° or less from vertical.
Part No: 2730
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Small Boat Captive Ball (CB) Traveler Cars
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Boat Size: Dinghies, multihulls, to small offshore boats. Material: One-piece solid aluminum . Shackle: Pivoting toggle models—fasten control blocks directly to post without needing a shackle. Sheave: Fixed sheave models—mainsheet loads 40° or less from vertical.
Part No: 2734
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Mainsheet Traveler->Small Boat Windward Sheeting Traveler Cars
A patented slider mechanism allows cars to be pulled to windward without releasing the leeward control line. Windward sheeting cars stay in place during tacks. Makes racing short-handed a lot more fun. Indicated use is based upon monohulls with end-boom travelers. Track Type: Small Boat CB Track: 2720, 2721, 373, 374, 2725, 2751. Block Type: Uses 2740 Control Blocks. Cleat Type: Modified 150 Cam-Matic. Shackle: Pivoting shackle. Cam: Leeward cleat opens automatically. Purchase: 2:1/3:1.
Part No: 2752
|
|
|
|
Home -> Sailboat -> Blocks->40mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 2657
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->57mm Black Magic® AirBlocks®
Strong, lightweight aluminum blocks for offshore boats Used for sheets, halyards, running backstays and control lines on offshore boats, these strong, lightweight blocks are made of sculpted aluminum with Torlon rollers and carbon black balls for strength and UV protection. Cheek Material/Finish: 6160-T6 Hardkote anodized aluminum . Sheave Size: 57mm (2-1/4") . Construction: Three fasteners for quick disassembly. Plastic isolators separate dissimilar metals. Three-way head system.
Part No: 1950
|
|
![Jib Lead with Bullseye & Swivel, Starboard from HARKEN]( "Jib Lead with Bullseye & Swivel, Starboard from HARKEN")
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Dinghy/Small Boat Jib Leads
For dinghies and small sportboats with jibs to 140sq. For the ultimate lightweight system, lash on the 2651 Ti-Lite (Model 1171412). Use the bullseye car for gradual turns. The jib lead/bullseye/swivel combo (452P/452S) has a controlled pivot angle so the cleat is always within easy reach, and features a 356 Carbo-Cam on a lightweight aluminum cam arm. Boat Size: Dinghies/ small sportboats, jibs to 140 sq. Cam: 57° cam arm rotation . Cleat Type: 365 Carbo-Cam with 424B Flairlead, #10 FHMS .
Part No: 452S
|
|
![1-1/2" Thru-Deck (17/32" x 2-5/16" cutout), 1,500lb. SWL, 3.3oz. from HARKEN]( "1-1/2\" Thru-Deck (17/32\" x 2-5/16\" cutout), 1,500lb. SWL, 3.3oz. from HARKEN")
|
|
Home -> Sailboat -> Blocks->Line/Wire High-Strength Blocks
Lightweight, low-friction blocks with hi-load composite bearings carry wire halyards and control line cascades. Side load balls minimize friction from twisting or unfair leads on 304. 300s have thrust washers. Cheek blocks come with fasteners. Sheave: Teflon impregnated Hardkote anodized aluminum. Sheave Size: 1" (25mm), 1-1/2" (38mm), 2" (51mm). Line Diameter: 1" sheave - 3/32"; 1 1/2 sheave - 1/8"; 2"sheave - 3/16".
Part No: 306
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers->Standard Cam Cleats and Accessories
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
Part No: 298
|
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers->Micro Cam Cleats & Accessories
Delrin® ball bearings allow pawls to open and close effortlessly under both high and low loads; just pull the line straight down, and the cam opens and holds perfectly. Cam-Matics® Cam-Matics feature Hardkote anodized aluminum pawls, three rows of ball bearings (two on the 338), and are designed for high-load, high wear applications. Carbo-Cams® Perfect for racing boats. X-Treme Angle Fairleads Allows releasing and recleating at angles up to 90° to the cleat, unlike any other fairlead.
Part No: 424BL
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->Bullet Blocks
Available in a wide range of designs, bullet blocks are the foundation of the Harken line, and are adaptable to almost all control line applications. Ideal for cunninghams, vangs, outhauls, traveler controls, spinnaker controls, barberhaulers, etc. Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size: 1 1/8" (29mm) . Line Dia: 5/16" max. . Cheek Material/Finish: Plastic with stainless strap . Cleat: 094, 095, 291- 423 Carbo-Cam® .
Part No: 095
|
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->Bullet Blocks
Available in a wide range of designs, bullet blocks are the foundation of the Harken line, and are adaptable to almost all control line applications. Ideal for cunninghams, vangs, outhauls, traveler controls, spinnaker controls, barberhaulers, etc. Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size: 1 1/8" (29mm) . Line Dia: 5/16" max. . Cheek Material/Finish: Plastic with stainless strap . Cleat: 094, 095, 291- 423 Carbo-Cam® .
Part No: 088
|
|
|
|
Home -> Sailboat -> Blocks->40mm Carbo Ratchet Blocks
Control loaded lines with ease Lightweight Carbo Ratchets are available in 40mm, 57mm, and 75mm sizes. The 40mm blocks are perfect for jibsheets and spinnakers on small dinghies where size and weight are critical. 57mm and 75mm sizes have many configurations to fit jibsheets, spinnakers, and mainsheet systems on boats ranging from dinghies to large sportboats. The Cheek Block is also switch-controlled. The 40mm cam-arm versions work in ratchet mode only. Sheave Size: 1-9/16" (40mm).
Part No: 2614
|
|
|
|
Home -> Sailboat -> Blocks->57mm Carbo Ratchet Blocks
Control loaded lines with ease Lightweight Carbo Ratchets are available in 40mm, 57mm, and 75mm sizes. The 40mm blocks are perfect for jibsheets and spinnakers on small dinghies where size and weight are critical. 57mm and 75mm sizes have many configurations to fit jibsheets, spinnakers, and mainsheet systems on boats ranging from dinghies to large sportboats. The Cheek Block is also switch-controlled. The 40mm cam-arm versions work in ratchet mode only. Sheave Size: 1-9/16" (40mm).
Part No: 2138
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Big Boat Traveler Cars & Accessories
Big Boat Captive Ball Traveler Cars are built to handle high loads on boats from 32 to 50 ft. , and up to 70ft. Machined aluminum Hardkote-anodized races permit Torlon® bearings to transition smoothly from the active to return race for smooth trimming or easing. Stainless steel wire guides keep the balls captive when the car is off the track. Pivoting shackle/toggle cars have low pivot points to handle non-vertical loads. Blocks attach directly to the toggle for a low-profile, compact system.
Part No: 3163
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Furling Accessories
Cruising Furler Unit 1 Accessories.
Part No: -
|
|
|
|
Home -> Sailboat -> Blocks->57mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 2624
|
|
|
|
Home -> Sailboat -> Blocks->29mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 349
|
|
|
|
Home -> Sailboat -> Blocks->Midrange Blocks
Great for mainsheet or spinnaker blocks and control lines on offshore yachts. Robust construction handles high loads. Ball-bearing sheaves minimize friction. Beefier posts and wrap-around straps create much higher working loads. Three-way head system permits blocks to swivel or be fixed side-to-side or fore-and-aft. Beckets are removable. Where applicable, blocks use 1/4" fasteners. Ball Bearings: Torlon high-load ball bearings in fitted races. Line Diameter: 9/16" max.
Part No: 1548
|
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers->Micro Cam Cleats & Accessories
Delrin® ball bearings allow pawls to open and close effortlessly under both high and low loads; just pull the line straight down, and the cam opens and holds perfectly. Cam-Matics® Cam-Matics feature Hardkote anodized aluminum pawls, three rows of ball bearings (two on the 338), and are designed for high-load, high wear applications. Carbo-Cams® Perfect for racing boats. X-Treme Angle Fairleads Allows releasing and recleating at angles up to 90° to the cleat, unlike any other fairlead.
Part No: 293
|
|
|
|
Home -> Sailboat -> Blocks->16mm AirBlocks®
AirBlocks have a lightweight design and a unique patented bearing system which uses stainless steel balls in a captive, grooved race. Very high working loads in an extremely lightweight block, with the best strength-to-weight ratios around. Sheave: Delrin. Sheave Size: 5/8" (16mm). Ball Bearings: Stainless. Line Diameter: 7/32" max.
Part No: 368
|
|
|
|
Home -> Sailboat -> Blocks->Big Bullet Blocks
Can be used as main or jib sheet blocks on dinghies, or for control line applications, such as travelers, cunninghams or boom vangs on offshore boats. Where applicable, blocks use #10 fasteners. Sheave: Delrin. Sheave Size: 1-1/2" (38mm). Ball Bearings: Delrin. Line Diameter: 3/8" . Cheek Material/Finish: Plastic/stainless straps.
Part No: 146
|
|
|
|
|
Home -> Sailboat -> Blocks->57mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 2603
|
|
|
|
|
Home -> Sailboat -> Blocks->57mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 2605
|
|
|
|
|
Home -> Sailboat -> Blocks->40mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 2636
|
|
|
