Top Sellers
#809 Notched Spreader from WEST SYSTEM
4'' x 4'' plastic spreader with 1/8'', 3/16'' and 1/4'' notches on three sides for quickly applying modified epoxy at a constant thickness.
|
Snap Furl CF-700 Furling System from SCHAEFER
" Small boat furler comparison, Practical SailorSnapFurl systems come in two sizes to accommodate boats 16' to 24' and boats 24' to 28' and represents the latest in quality Schaefer design and engineering. The efficient Round Geon™ PVC foil snaps quickly and easily around your boat’s existing headstay without the need for special tools or modifications to the rig. System SnapFurl CF-500 for Boats 16’ to 24’ (4. Long fiber reinforced injection molded components make SnapFurl CF 500 unique.
|
|
|
1/8" Single Braid, 2300lb. Breaking Strength, Green from SAMSON ROPE
The high-strength, low-stretch equivalent to wire rope with seven times less weight! Combined with flex-fatigue and service life durability, Amsteel 12-strand Dyneema SK-75 single braid can outlast wire rope and has none of the handling and safety issues associated with wire. Stretch: 0. 70% at 20% of breaking strength. Best Use: Cascade systems, replacements for wire halyards, tapered sheets, backstays, runners, checkstays and strong ultralight rigging . Construction: 12-strand single braid .
|
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
RigTune Pro Digital Rig Tension Gauge from HARKEN
Old-fashioned spring gauges, like the Loos Pro, don’t provide repeatable numbers. This product does. Unlike spring-loaded gauges, the Harken Rigtune Pro measures rig tension to the nearest kilogram. A load cell records the pressure on one of the pins and the measurement is displayed on a simple, easy-to-read screen. The Rigtune Pro fits a specific range of rigging sizes, 2. As rigging is deflected over three pins on the back of the gauge, a load cell records the pressure on one of the pins.
|
Flat Cam Riser, 1"H from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
|
Replacement Ball Bearings for 150 Cam Cleat from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
|
57mm Black Magic AirBlock, High-Load Strap Head with Becket, 2,500lb. SWL, 3.6oz. from HARKEN
Strong, lightweight aluminum blocks for offshore boats Used for sheets, halyards, running backstays and control lines on offshore boats, these strong, lightweight blocks are made of sculpted aluminum with Torlon rollers and carbon black balls for strength and UV protection. Cheek Material/Finish: 6160-T6 Hardkote anodized aluminum . Sheave Size: 57mm (2-1/4") . Construction: Three fasteners for quick disassembly. Plastic isolators separate dissimilar metals. Three-way head system.
|
Spinnaker Pole Car, Track #2720, 900sq.ft. Max. Sail Area, 1125lb. SWL from HARKEN
Now with captive ball bearings, which eliminates the need for a ball-bearing loader during installation or removal from track. These cars run freely, fit low-beam traveler track and are easy to adjust under any load.
|
|
|
29mm Carbo Clew Block Assembly from HARKEN
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
|
Midrange Four-Hole Eyestrap from HARKEN
Forged eyestraps are extremely strong and their smooth shape won’t chafe line. Stainless steel . 6000lb. Breaking load.
|
Winch Service Kit from HARKEN
Contains 10 pawls and 10 springs.
|
|
|
|
from HARKEN, SWL from HARKEN, 16" from HARKEN, 4" from HARKEN
|
|
Home -> Sailboat -> Blocks -> Blocks->Bullet Blocks
Available in a wide range of designs, bullet blocks are the foundation of the Harken line, and are adaptable to almost all control line applications. Ideal for cunninghams, vangs, outhauls, traveler controls, spinnaker controls, barberhaulers, etc. Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size: 1 1/8" (29mm) . Line Dia: 5/16" max. . Cheek Material/Finish: Plastic with stainless strap . Cleat: 094, 095, 291- 423 Carbo-Cam® .
Part No: 087
|
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->Bullet Blocks
Available in a wide range of designs, bullet blocks are the foundation of the Harken line, and are adaptable to almost all control line applications. Ideal for cunninghams, vangs, outhauls, traveler controls, spinnaker controls, barberhaulers, etc. Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size: 1 1/8" (29mm) . Line Dia: 5/16" max. . Cheek Material/Finish: Plastic with stainless strap . Cleat: 094, 095, 291- 423 Carbo-Cam® .
Part No: 089
|
|
|
|
Home -> Clothing Accessories -> Gloves->Black Magic Full-Finger Gloves
Application: Inshore and dinghy performance sailing Configuration: Full-finger except 3/4-thumb and index finger Fabric: Unique, gripping fabric w/nylon Spandex mesh backs Lining: None Wrist Closure: Elastic wristbands, adjustable Velcro tabs Color: Gray/Black Size: Unisex S-XXL.
Part No: 2564XXL
|
|
|
|
Home -> Clothing Accessories -> Gloves->3/4 Finger Sailing Gloves
"They stay soft and flexible better that gloves made from Amara synthetic leather. " Perfect for Dyneema, Vectran and other synthetic line. The grip and durability of the Black Magic® palm material is superior to other sailing gloves. Nylon Spandex mesh for super fit. Minimal stretch when wet. Dries soft. Imported. Dinghy and inshore performance sailing . Configuration: 3/4-finger . Elastic wristbands, adjustable Velcro tabs . Gray/Black .
Part No: 2563XXL
|
|
|
|
|
Home -> Clothing Accessories -> Gloves -> Sailing Gloves->3/4 Finger Sailing Gloves
"They stay soft and flexible better that gloves made from Amara synthetic leather. " Perfect for Dyneema, Vectran and other synthetic line. The grip and durability of the Black Magic® palm material is superior to other sailing gloves. Nylon Spandex mesh for super fit. Minimal stretch when wet. Dries soft. Imported. Dinghy and inshore performance sailing . Configuration: 3/4-finger . Elastic wristbands, adjustable Velcro tabs . Gray/Black .
Part No: 2563S
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Battcar Batten Traveler Systems, System A Components
Add a lazy jack system, and raising or lowering your mainsail becomes a single person operation. Battcar systems also improve sailing performance, because they do not require the sail to be cut flat, or reduce the size of the roach, as with other systems. They make mainsail handling safer, by allowing you to raise or lower the sail with practically no effort at all, even with the sail powered up. At the inboard end of every batten, special ball bearing or slider Battcars move along the track.
Part No: 3804
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Small Boat Captive Ball (CB) Traveler Cars
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Boat Size: Dinghies, multihulls, to small offshore boats. Material: One-piece solid aluminum . Shackle: Pivoting toggle models—fasten control blocks directly to post without needing a shackle. Sheave: Fixed sheave models—mainsheet loads 40° or less from vertical.
Part No: 2733
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers->Standard Cam Cleats and Accessories
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
Part No: 438
|
|
|
|
Home -> Sailboat -> Blocks
Sheave dia. : 1-1/8". Length: 3". Weight: 1. 25oz. Max. line dia. :5/16 . SWL: 300lb. Breaking strength: 2000lb. Cutout: 3/4" x 1-3/4".
Part No: 287
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Mainsheet Traveler->Midrange Traveler Track & Accessories
Midrange track is available in low-beam or high-beam configurations. Use high-beam track to span a cockpit or other unsupported area. Choose between variable hole spacing and drilled track. Holes in metric drilled track are on 100mm centers. Use 1/4” (6mm) FHMS fasteners. End stops sold separately. Add 1522 or 1523 Heavy Duty End Stops (sold in pairs, fasteners not included) when end control assemblies are not used. Low-beam track measures 9/16" (14mm)H x 1 1/16" (27mm)W.
Part No: 1616.1.2M
|
|
|
|
Home -> Sailboat -> Blocks->75mm Carbo Ratchet Blocks
Control loaded lines with ease Lightweight Carbo Ratchets are available in 40mm, 57mm, and 75mm sizes. The 40mm blocks are perfect for jibsheets and spinnakers on small dinghies where size and weight are critical. 57mm and 75mm sizes have many configurations to fit jibsheets, spinnakers, and mainsheet systems on boats ranging from dinghies to large sportboats. The Cheek Block is also switch-controlled. The 40mm cam-arm versions work in ratchet mode only. Sheave Size: 1-9/16" (40mm).
Part No: 2672
|
|
|
|
Home -> Sailboat -> Headsail Furling
Cruising Furler Unit 2 Accessories.
Part No: -
|
|
|
|
Home -> Sailboat -> Blocks->75mm Carbo Ratchamatic Blocks
Control loaded lines with ease The 57mm and 75mm Carbo Ratchamatic blocks are adjustable for use in many applications and weather conditions. This load-sensing ratchet block rolls freely in both directions under low loads, then engages the ratchet automatically as loads increase. Great for asymmetrical spinnakers when you need tough holding power and a quick release. Sheave Size: 1-9/16" (40mm). Ball Bearings: Engineered plastic in fitted ball races. Line Diameter: 3/8" .
Part No: 2688
|
|
|
|
Home -> Sailboat -> Blocks->ESP Deck Organizers
Mount organizers with large fasteners directly through the sheaves. If you need an additional sheave, use the same holes and simply drill another hole to mount the longer organizer. Organizers are asymmetrical to keep them short, and may be double stacked to contain several lines in a small area.
Part No: 6101
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Snap Shackles
For blocks with 1/4" shackle pin. 3-3/8"L (excluding spring). 1,500lb. max.
Part No: 112
|
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers->Standard Cam Cleats and Accessories
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
Part No: 375
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Mainsheet Traveler->Small Boat Traveler Controls
These end controls fit on all Harken Small Boat track. Low-profile, high-strength and lightweight, these can be used in 2:1, 3:1 or 4:1 purchase systems. Easy installation with the turn of a screw. Sold in pairs. Track Type: Fits all Small Boat track. Material: One-piece aluminum base. Ball Bearings: Carbon-black Delrin. Sheave Size: 1-1/8" (29mm). Length: 3-7/16" (87mm).
Part No: 2741
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
Use the 237 and 339 where there is little deflection in the line such as when routing a spinnaker pole foreguy aft along the cabin house.
Part No: 339
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Micro-Captive Ball Traveler Cars & Track
Strong, lightweight, solid aluminum, one-piece cars boast stainless steel-wire ball guides that keep the high-strength Torlon balls captive when the car is off the track. Sculpted car bodies reduce weight. Low-profile Micro CB track is fully-saturated Hardkote–anodized for toughness and scratch-resistance. Low-profile, line-shedding endstop absorbs sudden shock loads that can occur during unintentional jibes. Application: Mainsheet cars. Vangs on small dinghies. Controls on small keelboats.
Part No: 2700
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Mainsheet Traveler->Small Boat Traveler Track & Accessories
Accepts all Harken Small Boat cars. Use low-beam when track is supported at each fastener hole. High-beam can span unsupported areas. Holes on 100mm centers.
Part No: 264
|
|
![2" Sheave Only, 2,000lb. SWL, 1.5oz. from HARKEN]( "2\" Sheave Only, 2,000lb. SWL, 1.5oz. from HARKEN")
|
|
Home -> Sailboat -> Blocks->Line/Wire High-Strength Blocks
Lightweight, low-friction blocks with hi-load composite bearings carry wire halyards and control line cascades. Side load balls minimize friction from twisting or unfair leads on 304. 300s have thrust washers. Cheek blocks come with fasteners. Sheave: Teflon impregnated Hardkote anodized aluminum. Sheave Size: 1" (25mm), 1-1/2" (38mm), 2" (51mm). Line Diameter: 1" sheave - 3/32"; 1 1/2 sheave - 1/8"; 2"sheave - 3/16".
Part No: 311
|
|
|
|
Home -> Sailboat -> Blocks->Deck Organizers
Use to run halyards and control lines aft from the mast to winches near the cockpit or wherever you need multiple sheave cheek blocks.
Part No: 1501
|
|
|
|
Home -> Sailboat -> Blocks->Big Bullet Blocks
Can be used as main or jib sheet blocks on dinghies, or for control line applications, such as travelers, cunninghams or boom vangs on offshore boats. Where applicable, blocks use #10 fasteners. Sheave: Delrin. Sheave Size: 1-1/2" (38mm). Ball Bearings: Delrin. Line Diameter: 3/8" . Cheek Material/Finish: Plastic/stainless straps.
Part No: 130
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->Fiddle Blocks
Used to build simple three- and four-part purchases. Dual sheave diameters prevent line chafe and form a neat, low-friction tackle in a single plane. Three-way head system, removable beckets, and adjustable, reversible 150 cams are standard. Hexaratchet has 15:1 holding power in one direction. Sheave: Delrin. Sheave Size: 3" (76mm) and 1-3/4" (44mm). Ball Bearings: Delrin. Cheek Material/Finish: Plastic with stainless straps. Shackle/Strap Type: Stamped swivel shackle.
Part No: 030
|
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->Bullet Blocks
Available in a wide range of designs, bullet blocks are the foundation of the Harken line, and are adaptable to almost all control line applications. Ideal for cunninghams, vangs, outhauls, traveler controls, spinnaker controls, barberhaulers, etc. Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size: 1 1/8" (29mm) . Line Dia: 5/16" max. . Cheek Material/Finish: Plastic with stainless strap . Cleat: 094, 095, 291- 423 Carbo-Cam® .
Part No: 085
|
|
|
|
|
Home -> Clothing Accessories -> Gloves -> Sailing Gloves->Black Magic Full-Finger Gloves
Application: Inshore and dinghy performance sailing Configuration: Full-finger except 3/4-thumb and index finger Fabric: Unique, gripping fabric w/nylon Spandex mesh backs Lining: None Wrist Closure: Elastic wristbands, adjustable Velcro tabs Color: Gray/Black Size: Unisex S-XXL.
Part No: 2564XL
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Micro-Captive Ball Traveler Cars & Track
Strong, lightweight, solid aluminum, one-piece cars boast stainless steel-wire ball guides that keep the high-strength Torlon balls captive when the car is off the track. Sculpted car bodies reduce weight. Low-profile Micro CB track is fully-saturated Hardkote–anodized for toughness and scratch-resistance. Low-profile, line-shedding endstop absorbs sudden shock loads that can occur during unintentional jibes. Application: Mainsheet cars. Vangs on small dinghies. Controls on small keelboats.
Part No: 2710
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Battcar Batten Traveler Systems, System AA Components
For Boats Under 35' Batten Traveler Systems replace conventional sail slugs with ball bearing traveler cars to handle the compression loads from full-length battens. The main becomes easier to hoist and lower, and won’t damage the sail track. Add a lazy jack system, and raising or lowering your mainsail becomes a single person operation. Battcar systems also improve sailing performance, because they do not require the sail to be cut flat, or reduce the size of the roach, as with other systems.
Part No: 3814
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Mainsheet Traveler->Midrange Captive Ball Traveler Cars
Recirculating ball-bearing travelers move freely under non-vertical loads and have a low-profile design. Captive balls allow easy installation. Built for high loads on offshore cruisers and racers. Toggle cars are designed with low pivot points for efficient load transfer and serve as a stand-up for mainsheets. Application: Mainsheet systems, offshore boats 27' to 34'. Ball Bearings: Recirculating captive Torlon bearings in open races. 1617, 1618. Material: Machined one-piece aluminum car.
Part No: 1626
|
|
|
|
Home -> Sailboat -> Blocks->75mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 2677
|
|
|
