Top Sellers
Spinnaker Pole Car, Track #2720, 900sq.ft. Max. Sail Area, 1125lb. SWL from HARKEN
Now with captive ball bearings, which eliminates the need for a ball-bearing loader during installation or removal from track. These cars run freely, fit low-beam traveler track and are easy to adjust under any load.
|
57mm Black Magic AirBlock, High-Load Strap Head with Becket, 2,500lb. SWL, 3.6oz. from HARKEN
Strong, lightweight aluminum blocks for offshore boats Used for sheets, halyards, running backstays and control lines on offshore boats, these strong, lightweight blocks are made of sculpted aluminum with Torlon rollers and carbon black balls for strength and UV protection. Cheek Material/Finish: 6160-T6 Hardkote anodized aluminum . Sheave Size: 57mm (2-1/4") . Construction: Three fasteners for quick disassembly. Plastic isolators separate dissimilar metals. Three-way head system.
|
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
RigTune Pro Digital Rig Tension Gauge from HARKEN
Old-fashioned spring gauges, like the Loos Pro, don’t provide repeatable numbers. This product does. Unlike spring-loaded gauges, the Harken Rigtune Pro measures rig tension to the nearest kilogram. A load cell records the pressure on one of the pins and the measurement is displayed on a simple, easy-to-read screen. The Rigtune Pro fits a specific range of rigging sizes, 2. As rigging is deflected over three pins on the back of the gauge, a load cell records the pressure on one of the pins.
|
Flat Cam Riser, 1"H from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
|
Replacement Ball Bearings for 150 Cam Cleat from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
|
Hi-Load Ti-Lite Car, Torlon Bearings, 850lb. SWL from HARKEN
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Boat Size: Dinghies, multihulls, to small offshore boats. Material: One-piece solid aluminum . Shackle: Pivoting toggle models—fasten control blocks directly to post without needing a shackle. Sheave: Fixed sheave models—mainsheet loads 40° or less from vertical.
|
29mm Carbo Clew Block Assembly from HARKEN
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
|
Winch Service Kit from HARKEN
Contains 10 pawls and 10 springs.
|
|
|
Midrange Four-Hole Eyestrap from HARKEN
Forged eyestraps are extremely strong and their smooth shape won’t chafe line. Stainless steel . 6000lb. Breaking load.
|
Flush Lock - Black/Stainless Steel with Adjustable Offset Cam Bar from PERKO
Black plastic with stainless steel "D" ring handle and with adjustable offset cam bar. Two O-rings for increased water resistance. Position indicator shows open or closed position. Door thickness: 3/8" to 1-14" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 3/8" to 3" .
|
Compact Horn w/ Black Cover 10023 from AFI
Stainless steel diaphragm and mounting bracket . Black polypropylene cover . Dimensions: 4 inches L x 3-3/4 inches W x 2-3/4 inches H . Maximum amp draw: 4 Amps . dB(A) rating: 108 at one meter Fundamental frequency: 350±15 .
|
Steering Wheel, Black w/ Burlwood Inserts from SCHMITT MARINE STEER
Classic Italian styling at an affordable price. Our Folletto wheels feature modern styling that will enhance the look of any power boat. These wheels feature aluminum spoke with polyurethane grips. The 3/4" tapered hub fits most steering systems. Black aluminum spoke. Black polyurethane grip. Burlwood inserts. 13-3/4" Diameter.
|
Flex Trim - Black 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.
|
|
from HARKEN, 5oz, 7oz, 6oz, 0oz, 5oz, 8oz, SWL from HARKEN, Black from HARKEN
|
|
Home -> Sailboat -> Blocks -> Blocks->57mm Carbo Ratchet Blocks
Control loaded lines with ease Lightweight Carbo Ratchets are available in 40mm, 57mm, and 75mm sizes. The 40mm blocks are perfect for jibsheets and spinnakers on small dinghies where size and weight are critical. 57mm and 75mm sizes have many configurations to fit jibsheets, spinnakers, and mainsheet systems on boats ranging from dinghies to large sportboats. The Cheek Block is also switch-controlled. The 40mm cam-arm versions work in ratchet mode only. Sheave Size: 1-9/16" (40mm).
Part No: 2139
|
|
|
|
Home -> Sailboat -> Winches->Winch Mounting Plates
Winch Mounting Plates.
Part No: B947736
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Mainsheet Traveler->Midrange Traveler Track & Accessories
Midrange track is available in low-beam or high-beam configurations. Use high-beam track to span a cockpit or other unsupported area. Choose between variable hole spacing and drilled track. Holes in metric drilled track are on 100mm centers. Use 1/4” (6mm) FHMS fasteners. End stops sold separately. Add 1522 or 1523 Heavy Duty End Stops (sold in pairs, fasteners not included) when end control assemblies are not used. Low-beam track measures 9/16" (14mm)H x 1 1/16" (27mm)W.
Part No: 1616.1.5M
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Mainsheet Traveler->Small Boat Traveler Track & Accessories
Accepts all Harken Small Boat cars. Use low-beam when track is supported at each fastener hole. High-beam can span unsupported areas. Holes on 100mm centers.
Part No: 2720.1M
|
|
![Jib Lead with Eyestrap from HARKEN]( "Jib Lead with Eyestrap from HARKEN")
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Dinghy/Small Boat Jib Leads
For dinghies and small sportboats with jibs to 140sq. For the ultimate lightweight system, lash on the 2651 Ti-Lite (Model 1171412). Use the bullseye car for gradual turns. The jib lead/bullseye/swivel combo (452P/452S) has a controlled pivot angle so the cleat is always within easy reach, and features a 356 Carbo-Cam on a lightweight aluminum cam arm. Boat Size: Dinghies/ small sportboats, jibs to 140 sq. Cam: 57° cam arm rotation . Cleat Type: 365 Carbo-Cam with 424B Flairlead, #10 FHMS .
Part No: 450
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->40mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 2645
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->29mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 340
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->Hoister Four-Point Lift System
Is your garage so packed full of stuff that there’s no room for the car? The Harken Hoister stores car-top recreational craft like kayaks, dinghies—even truck caps—up and out of the way. A self-locking, ball bearing block system prevents accidental release, even if you drop the line, so you can hoist or lower large items onto your car by yourself. There’s also one for a bike (Model 2043008). 8.
Part No: 7803
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers->Standard Cam Cleats and Accessories
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
Part No: 425BL
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->57mm Black Magic® AirBlocks®
Strong, lightweight aluminum blocks for offshore boats Used for sheets, halyards, running backstays and control lines on offshore boats, these strong, lightweight blocks are made of sculpted aluminum with Torlon rollers and carbon black balls for strength and UV protection. Cheek Material/Finish: 6160-T6 Hardkote anodized aluminum . Sheave Size: 57mm (2-1/4") . Construction: Three fasteners for quick disassembly. Plastic isolators separate dissimilar metals. Three-way head system.
Part No: 1963
|
|
![1-1/2" Single, 1,500lb. SWL, 2.8oz. from HARKEN]( "1-1/2\" Single, 1,500lb. SWL, 2.8oz. from HARKEN")
|
|
Home -> Sailboat -> Blocks->Line/Wire High-Strength Blocks
Lightweight, low-friction blocks with hi-load composite bearings carry wire halyards and control line cascades. Side load balls minimize friction from twisting or unfair leads on 304. 300s have thrust washers. Cheek blocks come with fasteners. Sheave: Teflon impregnated Hardkote anodized aluminum. Sheave Size: 1" (25mm), 1-1/2" (38mm), 2" (51mm). Line Diameter: 1" sheave - 3/32"; 1 1/2 sheave - 1/8"; 2"sheave - 3/16".
Part No: 304
|
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers->Standard Cam Cleats and Accessories
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
Part No: 425B
|
|
|
|
|
Home -> Sailboat -> Winches->One- & Two-Speed Non-Self-Tailing Winches
More bearings and pawls combined with Italian styling—better form and function Harken’s precision winches are extremely reliable and exceptionally efficient. Built to very fine tolerances, these winches feature large roller bearings on most gears and drive shafts. Use single-speed winches for sheets on small boats and for halyards on medium and large boats. Use small two-speed winches for sheets and halyards on boats of all sizes. Winches as small as the 48 have roller bearings in every gear.
Part No: B6A
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Main Reefing & Furling->Lazy Jack Systems
These kits contain everything for installing a simple, variable system Keep your mainsail under control and on the boom as it’s lowered. Works exceptionally well with fully-battened mains, but can also be used with conventional sails. Everything you need to install a simple, adjustable system is included in the kit: pre-swaged wires, blocks, eyestraps, line, a cleat, fasteners and instructions (including how to alter your sail cover for use with lazy jacks). 13m–3. 75m). 6' to 16' (3.
Part No: 254
|
|
|
|
Home -> Sailboat -> Blocks->Deck Organizers
Use to run halyards and control lines aft from the mast to winches near the cockpit or wherever you need multiple sheave cheek blocks.
Part No: 271
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Small Boat Traveler Track & Accessories
Accepts all Harken Small Boat cars. Use low-beam when track is supported at each fastener hole. High-beam can span unsupported areas. Holes on 100mm centers.
Part No: 174
|
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers->Micro Cam Cleats & Accessories
Delrin® ball bearings allow pawls to open and close effortlessly under both high and low loads; just pull the line straight down, and the cam opens and holds perfectly. Cam-Matics® Cam-Matics feature Hardkote anodized aluminum pawls, three rows of ball bearings (two on the 338), and are designed for high-load, high wear applications. Carbo-Cams® Perfect for racing boats. X-Treme Angle Fairleads Allows releasing and recleating at angles up to 90° to the cleat, unlike any other fairlead.
Part No: 424B
|
|
|
|
Home -> Sailboat -> Blocks->ESP Blocks
Designed to handle the high loads generated by modern racing and cruising boats, ESP blocks feature axle bearings to ensure smooth, hitch-free performance under high load and heavy winds. Sheave: Long-glass engineered plastic, except lockoff: aluminum. Bearings: Contained-axle sleeve and carbon-black Torlon ball bearings. Sheave Size: 3" (76mm). Line Diameter: 3/4".
Part No: 6086
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Small Boat Captive Ball (CB) Traveler Cars
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Boat Size: Dinghies, multihulls, to small offshore boats. Material: One-piece solid aluminum . Shackle: Pivoting toggle models—fasten control blocks directly to post without needing a shackle. Sheave: Fixed sheave models—mainsheet loads 40° or less from vertical.
Part No: 2753
|
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->29mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 381
|
|
|
|
Home -> Sailboat -> Blocks->40mm Carbo Ratchet Blocks
Control loaded lines with ease Lightweight Carbo Ratchets are available in 40mm, 57mm, and 75mm sizes. The 40mm blocks are perfect for jibsheets and spinnakers on small dinghies where size and weight are critical. 57mm and 75mm sizes have many configurations to fit jibsheets, spinnakers, and mainsheet systems on boats ranging from dinghies to large sportboats. The Cheek Block is also switch-controlled. The 40mm cam-arm versions work in ratchet mode only. Sheave Size: 1-9/16" (40mm).
Part No: 2612
|
|
|
|
Home -> Sailboat -> Blocks->16mm AirBlocks®
AirBlocks have a lightweight design and a unique patented bearing system which uses stainless steel balls in a captive, grooved race. Very high working loads in an extremely lightweight block, with the best strength-to-weight ratios around. Sheave: Delrin. Sheave Size: 5/8" (16mm). Ball Bearings: Stainless. Line Diameter: 7/32" max.
Part No: 391
|
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->40mm Carbo Ratchet Blocks
Control loaded lines with ease Lightweight Carbo Ratchets are available in 40mm, 57mm, and 75mm sizes. The 40mm blocks are perfect for jibsheets and spinnakers on small dinghies where size and weight are critical. 57mm and 75mm sizes have many configurations to fit jibsheets, spinnakers, and mainsheet systems on boats ranging from dinghies to large sportboats. The Cheek Block is also switch-controlled. The 40mm cam-arm versions work in ratchet mode only. Sheave Size: 1-9/16" (40mm).
Part No: 2611
|
|
|
|
|
Home -> Sailboat -> Blocks->40mm Carbo Ratchet Blocks
Control loaded lines with ease Lightweight Carbo Ratchets are available in 40mm, 57mm, and 75mm sizes. The 40mm blocks are perfect for jibsheets and spinnakers on small dinghies where size and weight are critical. 57mm and 75mm sizes have many configurations to fit jibsheets, spinnakers, and mainsheet systems on boats ranging from dinghies to large sportboats. The Cheek Block is also switch-controlled. The 40mm cam-arm versions work in ratchet mode only. Sheave Size: 1-9/16" (40mm).
Part No: 2613
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling
Installation is easy: C-shaped open connectors with low-friction plastic isolators slip onto the headstay wire and into the foil without the need to cut your headstay. The foil's twin grooves and smooth feeder allow fast hoists, douses, and sail changes—ideal for club racing. The Harken toggle assembly accepts standard turnbuckles using swage, rod, Norseman or Sta-Lok terminals, or fits directly to a marine eye and the turnbuckle body is accessible for adjustment by raising the drum.
Part No: 7412.10 5/8
|
|
|
|
|
Home -> Sailboat -> Winches->Winch Mounting Plates
Winch Mounting Plates.
Part No: B947738
|
|
|
|
Home -> Clothing Accessories -> Gloves -> Sailing Gloves->Reflex Full-Finger Perfomance Gloves
A responsive performance sailing glove designed for active line handling in all conditions. Sticky, abrasion-resistant Black Magic® palm and finger wraps provide superior grip, while maintaining dexterity and freedom of movement. Stretch-woven material .
Part No: BLACK-S
|
|
|
|
Home -> Sailboat -> Blocks->75mm Carbo Ratchamatic Blocks
Control loaded lines with ease The 57mm and 75mm Carbo Ratchamatic blocks are adjustable for use in many applications and weather conditions. This load-sensing ratchet block rolls freely in both directions under low loads, then engages the ratchet automatically as loads increase. Great for asymmetrical spinnakers when you need tough holding power and a quick release. Sheave Size: 1-9/16" (40mm). Ball Bearings: Engineered plastic in fitted ball races. Line Diameter: 3/8" .
Part No: 2689
|
|
|
|
|
Home -> Sailboat -> Blocks->57mm Black Magic® AirBlocks®
Strong, lightweight aluminum blocks for offshore boats Used for sheets, halyards, running backstays and control lines on offshore boats, these strong, lightweight blocks are made of sculpted aluminum with Torlon rollers and carbon black balls for strength and UV protection. Cheek Material/Finish: 6160-T6 Hardkote anodized aluminum . Sheave Size: 57mm (2-1/4") . Construction: Three fasteners for quick disassembly. Plastic isolators separate dissimilar metals. Three-way head system.
Part No: 1951
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->Bullet Blocks
Available in a wide range of designs, bullet blocks are the foundation of the Harken line, and are adaptable to almost all control line applications. Ideal for cunninghams, vangs, outhauls, traveler controls, spinnaker controls, barberhaulers, etc. Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size: 1 1/8" (29mm) . Line Dia: 5/16" max. . Cheek Material/Finish: Plastic with stainless strap . Cleat: 094, 095, 291- 423 Carbo-Cam® .
Part No: 291
|
|
|
