Top Sellers
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
RigTune Pro Digital Rig Tension Gauge from HARKEN
Old-fashioned spring gauges, like the Loos Pro, don’t provide repeatable numbers. This product does. Unlike spring-loaded gauges, the Harken Rigtune Pro measures rig tension to the nearest kilogram. A load cell records the pressure on one of the pins and the measurement is displayed on a simple, easy-to-read screen. The Rigtune Pro fits a specific range of rigging sizes, 2. As rigging is deflected over three pins on the back of the gauge, a load cell records the pressure on one of the pins.
|
Flat Cam Riser, 1"H from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
|
Replacement Ball Bearings for 150 Cam Cleat from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
|
Spinnaker Pole Car, Track #2720, 900sq.ft. Max. Sail Area, 1125lb. SWL from HARKEN
Now with captive ball bearings, which eliminates the need for a ball-bearing loader during installation or removal from track. These cars run freely, fit low-beam traveler track and are easy to adjust under any load.
|
Hi-Load Ti-Lite Car, Torlon Bearings, 850lb. SWL from HARKEN
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Boat Size: Dinghies, multihulls, to small offshore boats. Material: One-piece solid aluminum . Shackle: Pivoting toggle models—fasten control blocks directly to post without needing a shackle. Sheave: Fixed sheave models—mainsheet loads 40° or less from vertical.
|
57mm Black Magic AirBlock, High-Load Strap Head with Becket, 2,500lb. SWL, 3.6oz. from HARKEN
Strong, lightweight aluminum blocks for offshore boats Used for sheets, halyards, running backstays and control lines on offshore boats, these strong, lightweight blocks are made of sculpted aluminum with Torlon rollers and carbon black balls for strength and UV protection. Cheek Material/Finish: 6160-T6 Hardkote anodized aluminum . Sheave Size: 57mm (2-1/4") . Construction: Three fasteners for quick disassembly. Plastic isolators separate dissimilar metals. Three-way head system.
|
29mm Carbo Clew Block Assembly from HARKEN
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
|
Winch Service Kit from HARKEN
Contains 10 pawls and 10 springs.
|
|
|
|
|
Midrange Four-Hole Eyestrap from HARKEN
Forged eyestraps are extremely strong and their smooth shape won’t chafe line. Stainless steel . 6000lb. Breaking load.
|
T-Top Boat Cover, Center-Line Length 20'5" to 21'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
T-Top Boat Cover, Center-Line Length 19'5" to 20'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
Side-Mount with Trim & Tilt 4-Wire from TELEFLEX
SL-3 is specifically engineered for installation without control modifications. Port or starboard installation with various cable-entry angles. Adapts for push or pull mode without tools. “Easy-On” cable design means no shift or throttle adjustments. Optional trim switch in handle grip for one-hand operation. Functions: Gearshift/throttle . Levers: Dual functions—each lever controls throttle and shift . Lever Material: Metal . Features: Push button for neutral Adjustable brake .
|
|
from HARKEN, SWL from HARKEN, Port from HARKEN, Starboard from HARKEN
|
|
Home -> Sailboat -> Blocks->Hexaratchet II + 2 Ratchet Blocks
Larger version of the Little Hexaratchets with the same Teflon®-impregnated aluminum sheave. Easy to operate on/off button, and 3-way head system. Holding power of 15:1 with 180° wrap. Sheave: Teflon impregnated Hardkote anodized aluminum. Bearings: Delrin. Sheave Size: 3" (76mm). Line Diameter: 7/16" max. Shackle/Strap Type: Stamped swivel shackle with three-way head.
Part No: 044
|
|
|
|
Home -> Sailboat -> Winches->One- & Two-Speed Non-Self-Tailing Winches
More bearings and pawls combined with Italian styling—better form and function Harken’s precision winches are extremely reliable and exceptionally efficient. Built to very fine tolerances, these winches feature large roller bearings on most gears and drive shafts. Use single-speed winches for sheets on small boats and for halyards on medium and large boats. Use small two-speed winches for sheets and halyards on boats of all sizes. Winches as small as the 48 have roller bearings in every gear.
Part No: B8CCA
|
|
|
|
Home -> Sailboat -> Winches -> Self-Tailing Winches->Two-Speed Self-Tailing Winches
More bearings and pawls combined with Italian styling—better form and function Harken’s precision winches are extremely reliable and exceptionally efficient. Built to very fine tolerances, these winches feature large roller bearings on most gears and drive shafts. Use single-speed winches for sheets on small boats and for halyards on medium and large boats. Use small two-speed winches for sheets and halyards on boats of all sizes. Winches as small as the 48 have roller bearings in every gear.
Part No: B44.2STA
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers->Micro Cam Cleats & Accessories
Delrin® ball bearings allow pawls to open and close effortlessly under both high and low loads; just pull the line straight down, and the cam opens and holds perfectly. Cam-Matics® Cam-Matics feature Hardkote anodized aluminum pawls, three rows of ball bearings (two on the 338), and are designed for high-load, high wear applications. Carbo-Cams® Perfect for racing boats. X-Treme Angle Fairleads Allows releasing and recleating at angles up to 90° to the cleat, unlike any other fairlead.
Part No: 424Y
|
|
|
|
Home -> Sailboat -> Blocks -> Snatch Blocks->Snatch Blocks
The recessed push button on these blocks allows quick one-handed operation for receiving or removing a line. Features Harken’s low-friction roller bearings for sheave loads and ball bearings for side loads. Snap shackles attach to pad eyes and bails, while trunnion shackles attach to toerails and other fixtures where an ordinary snap shackle will not align with the load. : 5/8". Sheave: Glass-filled Delrin® . Bearings: Ball and roller bearings . Opening: One-handed push button .
Part No: 1609
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->Rope/Wire Bullet Blocks
Designed for vangs, outhauls, shrouds where wire is used or for rope where loads are too high for regular bullet blocks. Roller bearings handle high loads better than ball bearings. Where applicable, blocks use #10 fasteners. Sheaves are aluminum for strength. Sheave: Teflon® impregnated Hardkote anodized aluminum . Bearings: Delrin® roller bearings . Sheave Size: 1-1/8" (29mm) . Line Dia. 5/16" max. . Cheek Material/Finish: Plastic with stainless strap .
Part No: 183
|
|
|
|
Home -> Sailboat -> Blocks->Big Bullet Blocks
Can be used as main or jib sheet blocks on dinghies, or for control line applications, such as travelers, cunninghams or boom vangs on offshore boats. Where applicable, blocks use #10 fasteners. Sheave: Delrin. Sheave Size: 1-1/2" (38mm). Ball Bearings: Delrin. Line Diameter: 3/8" . Cheek Material/Finish: Plastic/stainless straps.
Part No: 222
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Battcar Batten Traveler Systems, System A Components
Add a lazy jack system, and raising or lowering your mainsail becomes a single person operation. Battcar systems also improve sailing performance, because they do not require the sail to be cut flat, or reduce the size of the roach, as with other systems. They make mainsail handling safer, by allowing you to raise or lower the sail with practically no effort at all, even with the sail powered up. At the inboard end of every batten, special ball bearing or slider Battcars move along the track.
Part No: 3805
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Battcar Batten Traveler Systems, System A Components
Add a lazy jack system, and raising or lowering your mainsail becomes a single person operation. Battcar systems also improve sailing performance, because they do not require the sail to be cut flat, or reduce the size of the roach, as with other systems. They make mainsail handling safer, by allowing you to raise or lower the sail with practically no effort at all, even with the sail powered up. At the inboard end of every batten, special ball bearing or slider Battcars move along the track.
Part No: 3826
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Micro-Captive Ball Traveler Cars & Track
Strong, lightweight, solid aluminum, one-piece cars boast stainless steel-wire ball guides that keep the high-strength Torlon balls captive when the car is off the track. Sculpted car bodies reduce weight. Low-profile Micro CB track is fully-saturated Hardkote–anodized for toughness and scratch-resistance. Low-profile, line-shedding endstop absorbs sudden shock loads that can occur during unintentional jibes. Application: Mainsheet cars. Vangs on small dinghies. Controls on small keelboats.
Part No: 2705
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->40mm Carbo Ratchet Blocks
Control loaded lines with ease Lightweight Carbo Ratchets are available in 40mm, 57mm, and 75mm sizes. The 40mm blocks are perfect for jibsheets and spinnakers on small dinghies where size and weight are critical. 57mm and 75mm sizes have many configurations to fit jibsheets, spinnakers, and mainsheet systems on boats ranging from dinghies to large sportboats. The Cheek Block is also switch-controlled. The 40mm cam-arm versions work in ratchet mode only. Sheave Size: 1-9/16" (40mm).
Part No: 2608
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Mainsheet Traveler->Midrange Traveler Track & Accessories
Midrange track is available in low-beam or high-beam configurations. Use high-beam track to span a cockpit or other unsupported area. Choose between variable hole spacing and drilled track. Holes in metric drilled track are on 100mm centers. Use 1/4” (6mm) FHMS fasteners. End stops sold separately. Add 1522 or 1523 Heavy Duty End Stops (sold in pairs, fasteners not included) when end control assemblies are not used. Low-beam track measures 9/16" (14mm)H x 1 1/16" (27mm)W.
Part No: 1616.1.8M
|
|
|
|
Home -> Sailboat -> Headsail Furling->MKIV Unit 0 Furler Accessories
Connectors and extra extrusions for MKIV Unit 0 Furler.
Part No: 7410.30
|
|
|
|
|
Home -> Sailboat -> Headsail Furling->MKIV Unit 2 Furler Accessories
Connectors, extra extrusions and link plates for MKIV Furler Unit 2.
Part No: 7412.30
|
|
|
|
Home -> Sailboat -> Headsail Furling->Cruising Furler Unit 1
A single-groove round foil withstands extreme reefing loads, letting you easily unfurl your headsail, furl and reef safely in a blow. The foils are easy to assemble with interlocking connectors (screws and adhesive included) built strong for years of torque-loading. The drum installs over your existing turnbuckle, adapting to a variety of rigging options. The Harken® toggle assembly accepts standard turnbuckles using swage, rod, Norseman or Sta-Lok terminals, or fits directly to a marine eye.
Part No: 7311.10 5/8
|
|
|
|
Home -> Sailboat -> Rigging Products
Snap these over your shrouds above the spreaders to allow genoas to roll over your spreaders and tack quickly. Fits 1/4'' wire. Can be drilled to fit up to 7/16'' wire. About 3 1/2'' dia. Also works on lifelines, inner forestays, babystays, etc.
Part No: 285
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Mainsheet Traveler->Midrange Traveler Track & Accessories
Midrange track is available in low-beam or high-beam configurations. Use high-beam track to span a cockpit or other unsupported area. Choose between variable hole spacing and drilled track. Holes in metric drilled track are on 100mm centers. Use 1/4” (6mm) FHMS fasteners. End stops sold separately. Add 1522 or 1523 Heavy Duty End Stops (sold in pairs, fasteners not included) when end control assemblies are not used. Low-beam track measures 9/16" (14mm)H x 1 1/16" (27mm)W.
Part No: 1618.1.8M
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->2.25" Blocks
The original Harken block Used for main and jib sheets on course racing keelboats, scows and dinghies with large mains. Often used for spinnaker halyards and sheets on small offshore boats. Swivel blocks feature a three-way head system with a set screw. Blocks with cams feature adjustable cam arms and reversible cam cleats. Where applicable, blocks use #8 fasteners. Sheave: Delrin. Bearings: Delrin ball bearings. Sheave Size: 2-1/4" (57mm). Line Diameter: 7/16" max.
Part No: 047
|
|
|
|
Home -> Sailboat -> Blocks->57mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 2600
|
|
|
|
Home -> Sailboat -> Blocks->100mm Black Magic® AirBlocks®
Used on offshore boats where weight and performance are critical. The 100mm range features free-rolling, large-diameter aluminum sheaves with Torlon roller bearings housed in a unique center cage. UV-resistant carbon-black Delrin balls carry sideloads. Blocks are Hardkote anodized and have 17-4PH stainless headposts and shackles. Easily disassembled. Ball Bearings: Torlon® Roller Bearings. Carbon-black Delrin® ball bearings . Sheave Size: 4" (100mm) . Line Dia: 5/8" max.
Part No: 3007
|
|
|
|
Home -> Sailboat -> Headsail Furling->Twin Groove Carbo Racing Foil Kits
Carbo Racing Foil material is 15% lighter than PVC, and is very low in friction, making hoists, douses, and sail changes faster. Impact resistance is increased, with less damage from spinnaker poles, especially in cold weather. The black color provides superior UV protection, and is easy to see against a light sky, making the jib trimmer’s job easier. Installation is simple, because the Carbo Foil uncoils and straightens. The foil snaps onto the stay easily, and can be done with the mast up.
Part No: 7000.9M
|
|
![1-1/2" Single with Becket, 1,500lb. SWL, 3.0oz. from HARKEN]( "1-1/2\" Single with Becket, 1,500lb. SWL, 3.0oz. from HARKEN")
|
|
Home -> Sailboat -> Blocks->Line/Wire High-Strength Blocks
Lightweight, low-friction blocks with hi-load composite bearings carry wire halyards and control line cascades. Side load balls minimize friction from twisting or unfair leads on 304. 300s have thrust washers. Cheek blocks come with fasteners. Sheave: Teflon impregnated Hardkote anodized aluminum. Sheave Size: 1" (25mm), 1-1/2" (38mm), 2" (51mm). Line Diameter: 1" sheave - 3/32"; 1 1/2 sheave - 1/8"; 2"sheave - 3/16".
Part No: 313
|
|
|
|
Home -> Sailboat -> Blocks->75mm Black Magic® AirBlocks®
75mm Black Magic AirBlocks feature Torlon roller bearings and carbon black balls for strength and reduced wear. The unique center cage separates rollers for less friction, and sideload ball bearings are protected by sculpted aluminum sideplates. Dissimilar metals are isolated to minimize corrosion. Sheave: 6061-T6 Hardkote anodized aluminum . Sheave Size: 3" (75mm) except 1975 Spriddle fiddle block—3" and 2-1/4" (75mm and 57mm). Line Dia: 9/16" (14mm) max.
Part No: 1975
|
|
|
|
|
Home -> Sailboat -> Blocks->75mm Black Magic® AirBlocks®
75mm Black Magic AirBlocks feature Torlon roller bearings and carbon black balls for strength and reduced wear. The unique center cage separates rollers for less friction, and sideload ball bearings are protected by sculpted aluminum sideplates. Dissimilar metals are isolated to minimize corrosion. Sheave: 6061-T6 Hardkote anodized aluminum . Sheave Size: 3" (75mm) except 1975 Spriddle fiddle block—3" and 2-1/4" (75mm and 57mm). Line Dia: 9/16" (14mm) max.
Part No: 1970
|
|
![Jib Lead with Bullseye from HARKEN]( "Jib Lead with Bullseye from HARKEN")
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Dinghy/Small Boat Jib Leads
For dinghies and small sportboats with jibs to 140sq. For the ultimate lightweight system, lash on the 2651 Ti-Lite (Model 1171412). Use the bullseye car for gradual turns. The jib lead/bullseye/swivel combo (452P/452S) has a controlled pivot angle so the cleat is always within easy reach, and features a 356 Carbo-Cam on a lightweight aluminum cam arm. Boat Size: Dinghies/ small sportboats, jibs to 140 sq. Cam: 57° cam arm rotation . Cleat Type: 365 Carbo-Cam with 424B Flairlead, #10 FHMS .
Part No: 451
|
|
![Small Boat Pinstop Slider Car, Starboard from HARKEN]( "Small Boat Pinstop Slider Car, Starboard from HARKEN")
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Dinghy/Small Boat Jib Leads
For dinghies and small sportboats with jibs to 140sq. For the ultimate lightweight system, lash on the 2651 Ti-Lite (Model 1171412). Use the bullseye car for gradual turns. The jib lead/bullseye/swivel combo (452P/452S) has a controlled pivot angle so the cleat is always within easy reach, and features a 356 Carbo-Cam on a lightweight aluminum cam arm. Boat Size: Dinghies/ small sportboats, jibs to 140 sq. Cam: 57° cam arm rotation . Cleat Type: 365 Carbo-Cam with 424B Flairlead, #10 FHMS .
Part No: 393S
|
|
![Small Boat Pinstop Slider Car, Port from HARKEN]( "Small Boat Pinstop Slider Car, Port from HARKEN")
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Dinghy/Small Boat Jib Leads
For dinghies and small sportboats with jibs to 140sq. For the ultimate lightweight system, lash on the 2651 Ti-Lite (Model 1171412). Use the bullseye car for gradual turns. The jib lead/bullseye/swivel combo (452P/452S) has a controlled pivot angle so the cleat is always within easy reach, and features a 356 Carbo-Cam on a lightweight aluminum cam arm. Boat Size: Dinghies/ small sportboats, jibs to 140 sq. Cam: 57° cam arm rotation . Cleat Type: 365 Carbo-Cam with 424B Flairlead, #10 FHMS .
Part No: 393P
|
|
![Midrange Pinstop Slider Car with Tang, Port from HARKEN]( "Midrange Pinstop Slider Car with Tang, Port from HARKEN")
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Dinghy/Small Boat Jib Leads
For dinghies and small sportboats with jibs to 140sq. Use the bail on the 450 with a spring and block. For the ultimate lightweight system, lash on the 2651 Ti-Lite (Model 1171412). Use the bullseye car for gradual turns. The jib lead/bullseye/swivel combo (452P/452S) has a controlled pivot angle so the cleat is always within easy reach, and features a 356 Carbo-Cam on a lightweight aluminum cam arm. . Cam: 57° cam arm rotation . Cleat Type: 365 Carbo-Cam with 424B Flairlead, #10 FHMS .
Part No: 1639P
|
|
![Midrange Pinstop Slider Car with Tang, Starboard from HARKEN]( "Midrange Pinstop Slider Car with Tang, Starboard from HARKEN")
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Dinghy/Small Boat Jib Leads
For dinghies and small sportboats with jibs to 140sq. For the ultimate lightweight system, lash on the 2651 Ti-Lite (Model 1171412). Use the bullseye car for gradual turns. The jib lead/bullseye/swivel combo (452P/452S) has a controlled pivot angle so the cleat is always within easy reach, and features a 356 Carbo-Cam on a lightweight aluminum cam arm. Boat Size: Dinghies/ small sportboats, jibs to 140 sq. Cam: 57° cam arm rotation . Cleat Type: 365 Carbo-Cam with 424B Flairlead, #10 FHMS .
Part No: 1639S
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track
Track and Car 6061-T6 Hardkote Anodized, Teflon impregnated aluminum.
Part No: 453.24
|
|
|
