Top Sellers
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
Cruising Kit for Boat Length to 25', 2000lb. SWL, 3/16" Max. Wire dia., 5/16" Pin dia., 4" Pin-to-Pin, 1/4" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
40mm Carbo Lead Block Assembly, Fits 1" (25mm) Stanchions, 485lb. SWL, 3.7oz. from HARKEN
These stanchion lead blocks have free-rolling ball bearings to lead line aft for safe furling from the cockpit. Use the 7401 40mm block on the bow pulpit as an inboard lead. The 7402 features a ratchet to control spooling when unfurling. The 7401 and 7402 have ball and socket bases to align blocks for smooth leads aft. The 7403 has a 29mm sheave and allows the furling line to travel outboard of the stanchion to keep the side deck clear. Mounts to stanchion with a four-screw clamp.
|
Mast Base Lead Block, Hi-Load, 2-1/4" Sheave Dia., 3/8" Line Dia., 2,500lb. SWL from HARKEN
For leading lines aft and over cabin tops or coamings. Narrow sheave carriers permit mounting several in a small area. Low lead profile keeps lines close to the deck. Standard block features a stainless shell, Delrin sheaves and roller bearings. High-load blocks have aluminum sheaves with ball bearings and Teflon-composite bushings designed to carry the high static loads of halyards. Sheave: 1-3/4". Sheave Size: 1986: 1-3/4" (44mm); 1988 & 3002: 2-1/4" (57mm).
|
Mast Base Lead Block, Hi-Load Over-the-Top, 2-1/4" Sheave Dia., 3/8" Line Dia., 2,500lb. SWL from HARKEN
For leading lines aft and over cabin tops or coamings. Narrow sheave carriers permit mounting several in a small area. Low lead profile keeps lines close to the deck. Standard block features a stainless shell, Delrin sheaves and roller bearings. High-load blocks have aluminum sheaves with ball bearings and Teflon-composite bushings designed to carry the high static loads of halyards. Sheave: 1-3/4". Sheave Size: 1986: 1-3/4" (44mm); 1988 & 3002: 2-1/4" (57mm).
|
57mm Carbo Ratchet Lead Block Assembly, Fits 7/8", 1" (22, 25mm) Stanchions, 500lb. SWL, 5.4oz. from HARKEN
These stanchion lead blocks have free-rolling ball bearings to lead line aft for safe furling from the cockpit. Use the 7401 40mm block on the bow pulpit as an inboard lead. The 7402 features a ratchet to control spooling when unfurling. The 7401 and 7402 have ball and socket bases to align blocks for smooth leads aft. The 7403 has a 29mm sheave and allows the furling line to travel outboard of the stanchion to keep the side deck clear. Mounts to stanchion with a four-screw clamp.
|
Lead Block Kit (includes all three blocks) from HARKEN
These stanchion lead blocks have free-rolling ball bearings to lead line aft for safe furling from the cockpit. Use the 7401 40mm block on the bow pulpit as an inboard lead. The 7402 features a ratchet to control spooling when unfurling. The 7401 and 7402 have ball and socket bases to align blocks for smooth leads aft. The 7403 has a 29mm sheave and allows the furling line to travel outboard of the stanchion to keep the side deck clear. Mounts to stanchion with a four-screw clamp.
|
29mm Outboard Lead Block Assembly, 3.0oz. from HARKEN
These stanchion lead blocks have free-rolling ball bearings to lead line aft for safe furling from the cockpit. Use the 7401 40mm block on the bow pulpit as an inboard lead. The 7402 features a ratchet to control spooling when unfurling. The 7401 and 7402 have ball and socket bases to align blocks for smooth leads aft. The 7403 has a 29mm sheave and allows the furling line to travel outboard of the stanchion to keep the side deck clear. Mounts to stanchion with a four-screw clamp.
|
Furling Lead, 1/2" Line Dia., 660lb. SWL from SPINLOCK
Low-profile design easily mounts to 1" stanchion using internal clamping system. WL/2 sheave model utilizes unique tracker ball angle adjustment.
|
Stanchion Mount, 1,000lb. SWL, 3.0oz. from SCHAEFER
This block leads the furling line outside your stanchions to keep furling lines out of the way. Slips over stanchions and secures by a simple set screw. Low-friction ball-bearing races. Max. Line Dia.
|
Pulpit Mount with Spring, 1,000lb. SWL, 4.0oz. from SCHAEFER
This block leads the furling line outside your stanchions to keep furling lines out of the way. Slips over stanchions and secures by a simple set screw. Low-friction ball-bearing races. Max. Line Dia.
|
Furling Lead, 1/2" Line Dia., 660lb. SWL from SPINLOCK
Low-profile design easily mounts to 1" stanchion using internal clamping system. WL/2 sheave model utilizes unique tracker ball angle adjustment.
|
Bullet Block, Double, 400lb. SWL, 2.5oz. from HARKEN
Available in a wide range of designs, bullet blocks are the foundation of the Harken line, and are adaptable to almost all control line applications. Ideal for cunninghams, vangs, outhauls, traveler controls, spinnaker controls, barberhaulers, etc. Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size: 1 1/8" (29mm) . Line Dia: 5/16" max. . Cheek Material/Finish: Plastic with stainless strap . Cleat: 094, 095, 291- 423 Carbo-Cam® .
|
Bullet Block, Cheek, 300lb. SWL, 1.3oz. from HARKEN
Available in a wide range of designs, bullet blocks are the foundation of the Harken line, and are adaptable to almost all control line applications. Ideal for cunninghams, vangs, outhauls, traveler controls, spinnaker controls, barberhaulers, etc. Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size: 1 1/8" (29mm) . Line Dia: 5/16" max. . Cheek Material/Finish: Plastic with stainless strap . Cleat: 094, 095, 291- 423 Carbo-Cam® .
|
|
2" Single, 2,000lb. SWL, 5.3oz. from HARKEN
Lightweight, low-friction blocks with hi-load composite bearings carry wire halyards and control line cascades. Side load balls minimize friction from twisting or unfair leads on 304. 300s have thrust washers. Cheek blocks come with fasteners. Sheave: Teflon impregnated Hardkote anodized aluminum. Sheave Size: 1" (25mm), 1-1/2" (38mm), 2" (51mm). Line Diameter: 1" sheave - 3/32"; 1 1/2 sheave - 1/8"; 2"sheave - 3/16".
|
|
from HARKEN, 75oz, 8oz, 12oz, 17oz, 3oz, 32" Furling Line dia, 5oz, SWL from HARKEN
|
|
Sailboat -> Winches->SpeedGrip Ball Bearing Winch Handles
SpeedGrip handles use a ball bearing knob on the top of the grip to allow much faster grinding under low loads, and more powerful two-handed grinding under high loads. A Harken exclusive. Grip: Ball-bearing double, with ball-bearing top. Type: Locking .
Part No: B10ASG
|
|
|
Sailboat -> Cleats & Stoppers->Standard Cam Cleats and Accessories
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
Part No: 365
|
|
|
Sailboat -> Winches -> Self-Tailing Winches->Two-Speed Self-Tailing Winches
More bearings and pawls combined with Italian styling—better form and function Harken’s precision winches are extremely reliable and exceptionally efficient. Built to very fine tolerances, these winches feature large roller bearings on most gears and drive shafts. Use single-speed winches for sheets on small boats and for halyards on medium and large boats. Use small two-speed winches for sheets and halyards on boats of all sizes. Winches as small as the 48 have roller bearings in every gear.
Part No: B32.2STA
|
|
|
Sailboat -> Traveler, Tracks & Vang -> Mainsheet Traveler->Midrange Traveler Track & Accessories
Midrange track is available in low-beam or high-beam configurations. Use high-beam track to span a cockpit or other unsupported area. Choose between variable hole spacing and drilled track. Holes in metric drilled track are on 100mm centers. Use 1/4” (6mm) FHMS fasteners. End stops sold separately. Add 1522 or 1523 Heavy Duty End Stops (sold in pairs, fasteners not included) when end control assemblies are not used. Low-beam track measures 9/16" (14mm)H x 1 1/16" (27mm)W.
Part No: 1522
|
|
|
Sailboat -> Blocks->Deck Organizers
Use to run halyards and control lines aft from the mast to winches near the cockpit or wherever you need multiple sheave cheek blocks.
Part No: 270
|
|
|
Sailboat -> Blocks->Little Fiddle Blocks
Like their big brothers, only for smaller 3:1 and 4:1 tackles. Hexaratchet has 10:1 holding power in one direction. Sheave: Delrin. Ball Bearings: Delrin. Sheave Size: 2-1/4" (57mm) & 1-1/2" (38mm). Line Diameter: 3/8" max. Cheek Material/Finish: Plastic with stainless straps. Shackle/Strap Type: Stamped swivel shackle.
Part No: 060
|
![Self-Contained Sheave, Single, 1/2" Wide, 300lb. SWL from HARKEN]( "Self-Contained Sheave, Single, 1/2\" Wide, 300lb. SWL from HARKEN")
|
|
Sailboat -> Blocks->Self-Contained Sheaves
Delrin®, with Delrin® ball bearings. Sheave dia. : 1 1/8'' (identical to Harken bullet block). Max. line dia. : 5/16''. Hole dia. : 1/4''.
Part No: 160
|
|
|
Sailboat -> Blocks->Micro Blocks
Extremely lightweight, free running blocks. Designed for any number of uses on dinghies and for lightly-loaded control lines on boats of all sizes (inside masts and booms, lead car returns, tackle, etc. ). Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size 7/8" (22mm) . Line Dia: 1/4" max. . Cheek Material/Finish: Polished 316 stainless . Shackle/Strap Type: Fixed loop, loop with shackle .
Part No: 234
|
|
|
Sailboat -> Shackles, Snaps & Fittings->Stamped “D” Shackles
Stainless-steel, high-resistance "D" shackles.
Part No: 138
|
|
|
Sailboat -> Blocks->57mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 2607
|
|
|
Sailboat -> Blocks->40mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 2637
|
|
|
|
Sailboat -> Blocks->40mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 2638
|
|
|
Sailboat -> Blocks -> Blocks->Bullet Blocks
Available in a wide range of designs, bullet blocks are the foundation of the Harken line, and are adaptable to almost all control line applications. Ideal for cunninghams, vangs, outhauls, traveler controls, spinnaker controls, barberhaulers, etc. Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size: 1 1/8" (29mm) . Line Dia: 5/16" max. . Cheek Material/Finish: Plastic with stainless strap . Cleat: 094, 095, 291- 423 Carbo-Cam® .
Part No: 086
|
|
|
Sailboat -> Blocks->Rope/Wire Bullet Blocks
Designed for vangs, outhauls, shrouds where wire is used or for rope where loads are too high for regular bullet blocks. Roller bearings handle high loads better than ball bearings. Where applicable, blocks use #10 fasteners. Sheaves are aluminum for strength. Sheave: Teflon® impregnated Hardkote anodized aluminum . Bearings: Delrin® roller bearings . Sheave Size: 1-1/8" (29mm) . Line Dia. 5/16" max. . Cheek Material/Finish: Plastic with stainless strap .
Part No: 108
|
|
|
|
Sailboat -> Cleats & Stoppers->Standard Cam Cleats and Accessories
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
Part No: 150BALLS
|
|
|
Sailboat -> Blocks -> Blocks->ESP Blocks
Designed to handle the high loads generated by modern racing and cruising boats, ESP blocks feature axle bearings to ensure smooth, hitch-free performance under high load and heavy winds. Sheave: Long-glass engineered plastic, except lockoff: aluminum. Bearings: Contained-axle sleeve and carbon-black Torlon ball bearings. Sheave Size: 3" (76mm). Line Diameter: 3/4".
Part No: 6058
|
|
|
Sailboat -> Headsail Furling -> Furling Accessories->Twin Groove Carbo Racing Foil Kits
Carbo Racing Foil material is 15% lighter than PVC, and is very low in friction, making hoists, douses, and sail changes faster. Impact resistance is increased, with less damage from spinnaker poles, especially in cold weather. The black color provides superior UV protection, and is easy to see against a light sky, making the jib trimmer’s job easier. Installation is simple, because the Carbo Foil uncoils and straightens. The foil snaps onto the stay easily, and can be done with the mast up.
Part No: 7000.12M
|
|
|
|
Sailboat -> Blocks->40mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 2651
|
|
|
Sailboat -> Blocks -> Fairlead Blocks->Genoa Lead Blocks
The High Performance car features a roller/ball bearing sheave for higher working loads, and rides on low friction sliders. It has a lever-operated pin stop that operates easily even with cold hands, and can be locked open and used to dead-end an adjustment line. Note: These blocks fit Harken low-profile traveler track Configuration: Twin sheet lead block . Sheave: Anodized aluminum . Ball Bearings: 249, 1537 - Torlon® ball bearings, 1997E -Torlon® roller/ball bearings . : 1/2" max.
Part No: 1537
|
|
|
Sailboat -> Blocks -> Blocks->Midrange Blocks
Great for mainsheet or spinnaker blocks and control lines on offshore yachts. Robust construction handles high loads. Ball-bearing sheaves minimize friction. Beefier posts and wrap-around straps create much higher working loads. Three-way head system permits blocks to swivel or be fixed side-to-side or fore-and-aft. Beckets are removable. Where applicable, blocks use 1/4" fasteners. Ball Bearings: Torlon high-load ball bearings in fitted races. Line Diameter: 9/16" max.
Part No: 1559
|
|
|
Sailboat -> Traveler, Tracks & Vang->Lazy Jack Systems
These kits contain everything for installing a simple, variable system Keep your mainsail under control and on the boom as it’s lowered. Works exceptionally well with fully-battened mains, but can also be used with conventional sails. Everything you need to install a simple, adjustable system is included in the kit: pre-swaged wires, blocks, eyestraps, line, a cleat, fasteners and instructions (including how to alter your sail cover for use with lazy jacks). 13m–3. 75m). 6' to 16' (3.
Part No: 253
|
|
|
Sailboat -> Headsail Furling->Halyard Restrainers
944 and 945 Halyard Restrainers have removable Hardkote-anodized sheaves that are grooved for both wire and rope halyards. Sheaves spin on Teflon® impregnated bearings. Use only when headstay is close to halyard sheave. Used to adjust the lead angle from the masthead sheave, if necessary.
Part No: 945
|
|
|
Sailboat -> Blocks->Big Bullet Blocks
.
Part No: 147
|
|
|
|
Sailboat -> Winches -> Self-Tailing Winches->Two-Speed Self-Tailing Winches
More bearings and pawls combined with Italian styling—better form and function Harken’s precision winches are extremely reliable and exceptionally efficient. Built to very fine tolerances, these winches feature large roller bearings on most gears and drive shafts. Use single-speed winches for sheets on small boats and for halyards on medium and large boats. Use small two-speed winches for sheets and halyards on boats of all sizes. Winches as small as the 48 have roller bearings in every gear.
Part No: B16STC
|
|
|
Sailboat -> Blocks->Big Bullet Blocks
.
Part No: 223
|
|
|
Sailboat -> Headsail Furling -> Headsail Furling->Small Boat Furling Kits
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
Part No: 435
|
|
|
Sailboat -> Blocks -> Blocks->2.25" Blocks
The original Harken block Used for main and jib sheets on course racing keelboats, scows and dinghies with large mains. Often used for spinnaker halyards and sheets on small offshore boats. Swivel blocks feature a three-way head system with a set screw. Blocks with cams feature adjustable cam arms and reversible cam cleats. Where applicable, blocks use #8 fasteners. Sheave: Delrin. Bearings: Delrin ball bearings. Sheave Size: 2-1/4" (57mm). Line Diameter: 7/16" max.
Part No: 001
|
|
|
Sailboat -> Traveler, Tracks & Vang->Midrange Captive Ball Traveler Cars
Recirculating ball-bearing travelers move freely under non-vertical loads and have a low-profile design. Captive balls allow easy installation. Built for high loads on offshore cruisers and racers. Toggle cars are designed with low pivot points for efficient load transfer and serve as a stand-up for mainsheets. Application: Mainsheet systems, offshore boats 27' to 34'. Ball Bearings: Recirculating captive Torlon bearings in open races. 1617, 1618. Material: Machined one-piece aluminum car.
Part No: 1628
|
|
|
Sailboat -> Blocks -> Blocks
Harken Bullet Pivoting Exit Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Sheave and sideplates UV-stabilized with carbon-black additive for maximum protection. Sheave diameter: 1 1/8". Length: 2 3/4". Shipping weight: . 50 lbs. Max line diameter: 1/4". Shackle pin diameter: 3/16".
Part No: 299
|
|
|
Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Midrange CB Trim Caps (Set)
Midrange High & Low Beam Trim Caps.
Part No: 1622
|
|
