Top Sellers
Outboard Lock - Merc/Mariner (40hp), 1/2" x 20 thread from MCGARD
Help make your outboard less attractive to thieves, and also keep it from vibrating loose while running. The vinyl-clad steel tube slides over the mounting screws and is secured with a hardened brass padlock. Padlock is recessed inside the tube to protect against cutting. Comes with two keys. *Fits: OMC 6-30hp, Merc/Mariner 8-25hp, Yamaha 9. 9-40hp, Suzuki 8-13hp.
|
Twisted Pair Wire with Shield from ANCOR MARINE
Similar to Ancor duplex wire, except that the conductors are twisted and surrounded by a copper shield for extra protection against noise and electrical interference. Red/black conductors. Recommended by ABYC for DC wiring near compasses and other magnetically - sensitive devices. Sold per foot. Wire Type: Twisted Pair . Construction: Tinned Copper . Conductors (Color and # of): 1 Red, 1 Black . Color of Exterior Insulation: White . Shielding: Copper Shield . Approvals: UL, ABYC, CSA .
|
30 Amp Circuit Breaker with Black Toggle from ANCOR MARINE
Temperature, false-trip-free, AC/DC breakers For use with either AC or DC current. Magnetic circuit breakers are temperature-stable. A false-trip free mechanism prevents breaker from being held with contacts closed during overload. Switch Type: Toggle . Voltage Compatibility: AC, DC . Safety Features: Temperature stable, false-trip free. Housing Material: Plastic Housing . Dimensions: 2" x 1. 64" x . 75" . Terminal Type: Screw .
|
Electric Bilge Pump Installation Kit from ANCOR MARINE
Essential items for installing a bilge pump Convenient package includes four #8 x 3/4" stainless-steel panhead screws, one 1-3/4" x 3/4" stainless steel hose clamp, and three 16-14AWG heat shrink butt connectors.
|
Large Funnel - 5GPM, 10"H x 8-1/2"Dia., 100 Micron from WEST MARINE
Fuel/Water Separator These filters were tested by Powerboat Reports (March 2003) and rated better than other more expensive funnels. Teflon-coated, stainless-steel filter separates water and dirt from gasoline, diesel and kerosene fuels. Made from industrial standard electroconductive polypropylene that can be grounded for extra safety. Tested and rated by Powerboat Reports (March 2003) better than other more expensive funnels. Separate water and dirt from gasoline, diesel and kerosene fuels.
|
30 Amp Double-Pole Circuit Breaker from ANCOR MARINE
Used with 110V AC main circuits so that both the hot and neutral conductors are disconnected. Same features as single pole breakers. White toggles. Switch Type: Toggle . Voltage Compatibility: 110V AC . Safety Features: Temperature stable, false-trip free . Housing Material: Plastic . Housing Dimensions: 1. 48"W x 2. 00"L x 1. 84"D .
|
Dielectric Silicone Compound from ANCOR MARINE
A silicone "grease" that's great for waterproofing coax connections, butt splices, and other sliding electrical connections. 1/3-oz.
|
G4 BI-PIN Base, 24V, 10W, 0.42A, 11CP from ANCOR MARINE
Keep spare bulbs handy in case of burnouts or breakage.
|
|
|
Mercury/Mariner Outboards, 1990-2000, All 2-stroke engines, 2.5-275HP from SELOC PUBLICATIONS
SELOC has been the leading source of how-to information for the marine industry since 1974. Designed and written to serve the needs of the professional mechanic, do-it-yourself boat enthusiast, instructor and student, these manuals are based on actual teardowns done by Seloc’s editors/authors in our on-site facility. This manual covers Mercury/Mariner Outboards, all 2-stroke engines, 2. 5-275HP from 1990-2000. Hundreds of exploded drawings, photographs and tables . Troubleshooting sections .
|
DELO 100 Diesel Engine Oil - SAE 30 5 gallons from CHEVRON
Recommended for use in older 2 and 4 stroke marine diesel engines, Chevron DELO 100 motor oils utilize the latest technology to provide excellent performance in older engines using either normal, high, or low sulfur fuels. The SAE 30 and 40 grades are specifically designed for 2-stroke diesel engines requiring highly effective control of wear and deposits. DELO 100 oils comply with Detroit Diesel Corporation 2-stroke engine requirements, including the 0.
|
Brass-Bristle Brush from SEAFIT
Solid brass bristles won't rust or corrodeLarge, plastic utility brush has solid brass bristles that won’t rust or corrode. Brass bristles are slightly softer than stainless steel and are therefore less intrusive to surfaces. Molded plastic handle provides solid, controlled grip. Bristles: 5/8"D. Overall length: 8 1/2". Molded plastic handle provides solid, controlled grip. 5/8"L bristles.
|
Solid Brass Vertical Action Galley Pump from FYNSPRAY
Vertical plunger pump with a gracefully arched spout. 50 strokes per gallon. 1"diameter tube. Fits 1/2"–5/8" hose. Requires 8 1/2" clearance below counter surface; 9 3/4" above Material: Brass. Capacity: 50 strokes/gal. Dimensions: 9 3/4"H. Cutout Size: 1 1/8". Clearance: 8 1/2".
|
8-1/2" Hatch Holder, Adjustable, for Hatches to 10lb. from MOONLITE MARINE
Stainless, spring-type holders “pop” into place to hold hatches, doors, table leaves, etc. Easy to install. Adjustable model allows opening between 10° and 80°.
|
Series 250 Exhaust Hose, 2-3/8"ID, 2-3/4"OD, 230psi Burst Pressure from SHIELDS RUBBER
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
|
|
Pk from ANCOR MARINE, 8 Qty, 2 Qty, 100 Qty, 25 Qty, 2 Qty, 100 Qty, 2 Qty, 1 Qty
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Standard AGC Fuses
Fast-acting, corrosion-resistant fuses open quickly to protect circuits from overloads and shortcircuits Time-delayed to allow temporary, harmless in-rush currents to pass but open on sustained overloads and short-circuits Each fuse tested twice to ensure highest quality Available in sizes to fit every need.
Part No: 601030
|
|
|
|
Home -> Electrical -> Interior Lighting -> Led Interior Lights->LED Replacement Bulbs
Bulb-LED Dbl Bay 20Wh 360Dg|Bulb-LED Dbl Bay 20Wh 360Dg.
Part No: 529410
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing Assortments
Every toolbox should have an assortment of heat shrink tubing. Can be used for rope whipping as well as wire.
Part No: 301503
|
|
|
|
Home -> Electrical -> Electrical Wire->Primary Wire, Mini Spools
Sophisticated marine electronics and instruments only operate at peak potential when supplied with power at the right voltage, and that necessitates high-quality wire. Ordinary automotive-type wire can suffer a loss of conductivity, caused by corrosion and/or vibration, after a few months in the marine environment. Finally, Ancor wire is based on AWG (American Wire Gauge) wire sizes, which are 6–12% larger than SAE gauge wire, so you get more current-carrying ability than from similar SAE wire.
Part No: 180803
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Slow-Blow MDL Fuses
Fast-acting, corrosion resistant fuses open quickly to protect circuits from overloads and shortcircuits Time-delayed to allow temporary, harmless in-rush currents to pass but open on sustained overloads and short-circuits Each fuse tested twice to ensure highest quality Available in sizes to fit every need.
Part No: 602200
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Nylon Flanged Spade Connectors
Brass sleeve crimps onto wire for additional strain relief. Grooved barrel grips wire for superior holding power. Tinned copper. Nylon insulated.
Part No: 220323
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Nylon Grommets
Flexible nylon grommets prevent wires from abrading where they pass through bulkheads and panels.
Part No: 760250
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Nylon Grommets
Flexible nylon grommets prevent wires from abrading where they pass through bulkheads and panels.
Part No: 760875
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Stainless-Steel Cushion Clamps
304 stainless-steel padded clamps are suitable for supporting fuel lines, electrical looms and plumbing. The EDPM insulator is water-, fuel-, oil-, and acid-resistant.
Part No: 404202
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Waterproof Ring Terminals
A short length of adhesive shrink tubing creates a waterproof wire termination. Style: Ring . Conductor Material: Tinned Copper . Wire Attachment Method: Crimp tool and heat . Insulation Type: Nylon shrink .
Part No: 312225
|
|
|
|
Used with 110V AC main circuits so that both the hot and neutral conductors are disconnected. Same features as single pole breakers. White toggles. Switch Type: Toggle . Voltage Compatibility: 110V AC . Safety Features: Temperature stable, false-trip free . Housing Material: Plastic . Housing Dimensions: 1. 48"W x 2. 00"L x 1. 84"D .
Part No: 552850
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->ATO/ATC Automotive-Style Fuses
Fast-acting, corrosion resistant fuses open quickly to protect circuits from overloads and shortcircuits Time-delayed to allow temporary, harmless in-rush currents to pass but open on sustained overloads and short-circuits Each fuse tested twice to ensure highest quality Available in sizes to fit every need.
Part No: 604010
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories
Black cable ties have UV inhibitors added for extended protection and longer life.
|
|
|
|
Home -> Electrical -> Electrical Wire->Duplex Wire, 100' Spools
White jacket over a black and a red conductor. Wire Type: Duplex . Construction: Tinned Copper . Conductors: One Black, One Red . Color of Exterior Insulation: White .
Part No: 121110
|
|
|
|
Home -> Electrical -> Electrical Wire->Primary Wire by the Spool
Ordinary automotive-type wire can suffer a loss of conductivity after a few months in the marine environment, caused by corrosion and/or vibration. Premium Ancor wire will provide a lasting solution for your sophisticated marine electronics and instruments to operate at peak potential. 600V . 105°C dry, 75°C wet . Rated for oily and wet environments . Type 3 stranded, with 5–10 times more copper strands than Type 2 . Marine UL-listed, and meets the highest ABYC standards for AC or DC use .
Part No: 102110
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Heavy-Duty Lugs
Tin-plated finish and fully annealed. Made of high-grade electrolytic copper with a flared end for easy wire insertion and seamless construction. AWG identification. Style: Lug . Conductor Material: Tinned Copper . Wire Attachment Method: hand or auto crimp tool .
Part No: 242265
|
|
|
|
Home -> Electrical -> Electrical Wire -> Duplex Wire->Flat Safety Wire, by the 100' Spool
To reduce the chances of electrocution on board, we strongly recommend using Safety Wire in your DC system. The familiar red and black conductors are now red and yellow, to reduce the chance of incorrectly connecting the AC hot (black) with the DC ground (black). Wire Type: Safety . Construction: Tinned Copper . Conductors (Color and # of): One Red, One Yellow . Color of Exterior Insulation: White .
Part No: 124710
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories
Two expandable trays hold 12 compartments of Ancor marine-grade electrical equipment and three essential toolsa much better value than buying items individually. Kit includes approximately 100 butt, spade, and ring connectors, 50–60 cable ties, clamps, various lengths of heat shrink tubing, spare bulbs and fuses in assorted sizes, two fuse holders, two battery lugs, #12 and #16 boat cable, 16/2 duplex wire, a wire cutter, wire stripper and wire crimper.
Part No: 220007
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories -> Electrical Terminals->Snap Plugs
Nylon Insulated with Insulation Grip.
Part No: 220718
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Fully Insulated Nylon Disconnects
Fully insulated (nylon covers entire disconnect). Tinned copper.
Part No: 221429
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Nylon-Insulated Ring Terminals with Funnel Entry
Corrosion-resistant tinned copper with brass sleeve for insulation grip and funnel entry for easy wire insertion. Style: Ring . Conductor Material: Tinned Copper . Wire Attachment Method: Hand or auto-crimp tool . Insulation Type: Nylon .
Part No: 230234
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Nylon-Insulated Ring Terminals with Funnel Entry
Corrosion-resistant tinned copper with brass sleeve for insulation grip and funnel entry for easy wire insertion. Style: Ring . Conductor Material: Tinned Copper . Wire Attachment Method: Hand or auto-crimp tool . Insulation Type: Nylon .
Part No: 230257
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 301106
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Nylon-Insulated Ring Terminals with Insulation Grip
Corrosion-resistant tinned copper with brass sleeve for insulation grip and funnel entry for easy wire insertion. Style: Ring . Conductor Material: Tinned Copper . Wire Attachment Method: Hand or auto-crimp tool . Insulation Type: Nylon .
Part No: 230202
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Mini Lamps
Keep spare bulbs handy in case of burnouts or breakage.
Part No: 522129
|
|
|
|
Home -> Electrical -> Interior Lighting -> Led Interior Lights->LED Replacement Bulbs
Bulb-LED Dbl Bay 20Wh 360Dg|Bulb-LED Dbl Bay 20Wh 360Dg.
Part No: 529419
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Standard Cable Tie Multi-Packs
Black cable ties have UV inhibitors added for extended protection and longer life.
Part No: 351182
|
|
|
|
Home -> Electrical -> Batteries & Accessories->Premium Battery Cable Assemblies
Premium 4AWG Battery Cable Assemblies: Marine-grade heavy-duty cables are pre-assembled with tinned copper lugs and adhesive-lined heat shrink tubing. Ready-to-use cables are acid/oil/moisture/corrosion-resistant. For continuous current draws up to 136A.
Part No: 189137
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 307148
|
|
|
|
Home -> Electrical -> Electrical Wire->Primary Wire by the Foot
Sophisticated marine electronics and instruments only operate at peak potential when supplied with power at the right voltage, and that necessitates high-quality wire. Ordinary automotive-type wire can suffer a loss of conductivity, caused by corrosion and/or vibration, after a few months in the marine environment. Finally, Ancor wire is based on AWG (American Wire Gauge) wire sizes, which are 6–12% larger than SAE gauge wire, so you get more current-carrying ability than from similar SAE wire.
Part No: 103011
|
|
|