Top Sellers
1/4" Dia. Stamped Halyard Shackle, 1,000SWL from SCHAEFER
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.
|
Black 3-Strand Nylon, 7/16'' Diameter, 5300lb. Breaking Strength from NEW ENGLAND ROPES
Dramatic resistance to damaging internal and external abrasion Combining premium nylon fiber with a high-quality marine coating and New England Rope’s superior manufacturing processes produces line that is five times more abrasion-resistant wet than any other nylon line. You can actually feel this critical performance advantage when you handle the supple line. Stretch: 16% at 15% of breaking strength. *Approximately 10–15% less strength than White Premium Three-Strand Nylon.
|
Hydrostatic Inflatable Life Vest without Harness from WEST MARINE
The Hammar 1F auto inflator is maintenance-free for five years and automatically inflates only when submerged in 4" of water. Designed for comfort with a low profile for maximum mobility. Soft neoprene Comfort Collar™ won’t chafe your neck. Patented SecureZip™ closure system breaks open easily when inflated, is easy to repack and stays closed during rigorous activities. Inflation cylinder is inside the bladder to protect against corrosion. Buoyancy: 35lb.
|
|
|
Ripstop Nylon Tape, Black from BAINBRIDGE INTERNATI
Fix sail tears with this high-strength nylon tape High-strength nylon. Adhesive-backed.
|
|
|
Bullseye, 1-1/8" Nylon from RONSTAN
Great for minor direction changes in line. Also good for containing line hanging along booms. Nylon deadeyes are available with or without insert.
|
|
|
|
|
|
|
Tee Type Sanitation Hose Fitting, Slip Fitting Thread from SHIELDS RUBBER
Fiberglass-reinforced nylon fittings designed to fit Shields Series 101, 148 and 144 hoses without heating or special tools. Use in sanitation systems, deck drain systems and water tank fill.
|
|
|
1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.
|
Fuel Hose, Type B-2 5/16" from MOELLER
We offer 5/16" and 3/8" SCG B-2 alcohol-resistant hose as used in pre-assembled fuel line. Sold by the foot.
|
Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.
|
|
SWL from HOLT ALLEN, 16" Nylon from HOLT ALLEN, 2" Nylon from HOLT ALLEN
|
|
Home -> Engine Systems -> Propellers & Drive Trains -> Aluminum Props->Henry H. Smith Propeller Repair
Smith & Company, the oldest and largest propeller repair facility in the Midwest, to offer repair and reconditioning of aluminum and stainless props. A family-owned business that began in 1900, Henry Smith, of Algonac, Michigan, specializes in providing solutions for all your boating propulsion problems. Operated by four generations of the same family, they can repair any prop from 6" to 60" in diameter, and they fix about 150 propellers of all shapes and sizes every day.
Part No: 111S11WM
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains -> Aluminum Props->Henry H. Smith Propeller Repair
Smith & Company, the oldest and largest propeller repair facility in the Midwest, to offer repair and reconditioning of aluminum and stainless props. A family-owned business that began in 1900, Henry Smith, of Algonac, Michigan, specializes in providing solutions for all your boating propulsion problems. Operated by four generations of the same family, they can repair any prop from 6" to 60" in diameter, and they fix about 150 propellers of all shapes and sizes every day.
Part No: 111A6WMwm
|
|
|
|
Home -> Paint & Maintenance -> Scrub Brushes & Hoses -> Scrub Brush Kits, Accessories
Get a "handle" on cleaning your waterline!Holds you and your dinghy in one spot while you clean the waterline. Also keeps your skiff from drifting while you’re in the water cleaning the bottom. Its 4”dia. suction cups work well underwater. 4"dia.
Part No: HOL-TITE
|
|
|
|
Home -> Sailboat -> Blocks -> Snatch Blocks->Dinghy Snatch Blocks
Glass-filled nylon cheeks with 316 stainless straps increase working efficiency more than 50% with minimal weight increase. Stainless ball bearings in a polypropylene cassette. For spinnaker sheet, jib sheet turning blocks, etc. Cheek Material/Finish: Glass filled nylon. Ball Bearing: Stainless ball bearings. Opening: Hinged cheek/axle.
Part No: HA1375/1
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->Nylon Thimbles
Nylon Thimbles.
Part No: HA.805TAG/1
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
Stainless steel screw shackle for wire rope. Length: 36mm (1. 44''). Pin size: 5mm (0. 2''). Opening: 13mm (. 52''). Strap width: 13mm (.
Part No: HA4828/1
|
|
![Dinghy Block, Single with Lashing Eye, 3/8" Rope Dia., 1-1/2" Sheave Dia., 330lb. SWL from HOLT ALLEN]( "Dinghy Block, Single with Lashing Eye, 3/8\" Rope Dia., 1-1/2\" Sheave Dia., 330lb. SWL from HOLT ALLEN")
|
|
Home -> Sailboat -> Blocks->Dinghy Blocks & Hardware
Used on production dinghies like Lasers and other popular classes. Acetal resin with stainless steel axle and plain bearings.
Part No: HA.278/1
|
|
|
|
Home -> Sailboat -> Rigging Products
Stainless steel prefeeder is a bowman's dreamA bowman's dream, this prefeeder opens with the pull of the piston latch for easy connection to the headsail luff tape. Plus, there is no need to drop the sail or feed it by hand if the luff tape comes out of the prefeeder. Made from 316 stainless steel and features rolling balls to reduce friction and aid smooth hoists. The hinge is offset from the center line so that it can easily be lashed to the forestay.
Part No: HT9900/1
|
|
|
|
|
Home -> Sailboat -> Blocks -> Snatch Blocks->Dinghy Snatch Blocks
Glass-filled nylon cheeks with 316 stainless straps increase working efficiency more than 50% with minimal weight increase. Stainless ball bearings in a polypropylene cassette. For spinnaker sheet, jib sheet turning blocks, etc. Cheek Material/Finish: Glass filled nylon. Ball Bearing: Stainless ball bearings. Opening: Hinged cheek/axle.
Part No: HA4475/1
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Buoyancy Bags->Buoyancy Bags
Holt Allen buoyancy bags are made of tough and thoroughly tested heavy duty PVC shaped and finished to fit snugly in your dinghy. The bags are made from PVC 0. 16” thick as specified in British Standard 3501-1.
Part No: SB2202
|
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Buoyancy Bags->Buoyancy Bags
Holt Allen buoyancy bags are made of tough and thoroughly tested heavy duty PVC shaped and finished to fit snugly in your dinghy. The bags are made from PVC 0. 16” thick as specified in British Standard 3501-1.
Part No: SB2103
|
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Buoyancy Bags->Buoyancy Bags
Holt Allen buoyancy bags are made of tough and thoroughly tested heavy duty PVC shaped and finished to fit snugly in your dinghy. The bags are made from PVC 0. 16” thick as specified in British Standard 3501-1.
Part No: SB2302
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->Nylon Thimbles
Nylon Thimbles.
Part No: HA.810TAG/1
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->Nylon Thimbles
Nylon Thimbles.
Part No: HA.812TAG/1
|
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Buoyancy Bags->Buoyancy Bags
Holt Allen buoyancy bags are made of tough and thoroughly tested heavy duty PVC shaped and finished to fit snugly in your dinghy. The bags are made from PVC 0. 16” thick as specified in British Standard 3501-1.
Part No: SB2502
|
|
![Dinghy Block, Single with Sister Clip, 3/8" Rope Dia., 1-1/2" Sheave Dia., 330lb. SWL from HOLT ALLEN]( "Dinghy Block, Single with Sister Clip, 3/8\" Rope Dia., 1-1/2\" Sheave Dia., 330lb. SWL from HOLT ALLEN")
|
|
Home -> Sailboat -> Blocks->Dinghy Blocks & Hardware
Used on production dinghies like Lasers and other popular classes. Acetal resin with stainless steel axle and plain bearings.
Part No: HA.278-74/1
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->Nylon Thimbles
Nylon Thimbles.
Part No: HA.806TAG/1
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Line Fairleads - Acetal
Acetal resin open-base fairleads have rounded edges to minimize chafe. Require two #10 RHMS.
Part No: HA.182/2
|
|
|
|
Home -> Sailboat -> Blocks->Dinghy Vang Blocks
Aluminum cheek blocks for small boat vangs and other purchases. Original equipment on Laser boom vangs.
Part No: HA.165LZ/1
|
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Buoyancy Bags->Buoyancy Bags
Holt Allen buoyancy bags are made of tough and thoroughly tested heavy duty PVC shaped and finished to fit snugly in your dinghy. The bags are made from PVC 0. 16” thick as specified in British Standard 3501-1.
Part No: SB2112
|
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Buoyancy Bags->Buoyancy Bags
Holt Allen buoyancy bags are made of tough and thoroughly tested heavy duty PVC shaped and finished to fit snugly in your dinghy. The bags are made from PVC 0. 16” thick as specified in British Standard 3501-1.
Part No: SB2802
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Tillers Extensions & Ac->Lightning Sticks Tiller Extensions
Holt worked with members of the British National 470 Sailint Team to develop what may be the most lightweight and versatile tiller extensions ever! Soft, light foam grip around thicker diameter makes it easy to hold on to when the action unfolds fast!.
Part No: HA5508-13
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Line Fairleads - Acetal
Acetal resin open-base fairleads have rounded edges to minimize chafe. Require two #10 RHMS.
Part No: HA.282/2
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->Nylon Thimbles
Nylon Thimbles.
Part No: HA.818TAG/1
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->Nylon Thimbles
Nylon Thimbles.
Part No: HA.808TAG/1
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Folding Pad Eyes
Fold-down pad eyes stay out of the way until needed Essential deck hardware from Holt. Superior quality, forged stainless steel pad eyes fold down when not in use.
Part No: HT60085961/1
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Folding Pad Eyes
Fold-down pad eyes stay out of the way until needed Essential deck hardware from Holt. Superior quality, forged stainless steel pad eyes fold down when not in use.
Part No: HT60010751/1
|
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Buoyancy Bags->Buoyancy Bags
Holt Allen buoyancy bags are made of tough and thoroughly tested heavy duty PVC shaped and finished to fit snugly in your dinghy. The bags are made from PVC 0. 16” thick as specified in British Standard 3501-1.
Part No: SB2602
|
|
|
|
Home -> Sailboat -> Rigging Products
Seal the mast boot with strong, waterproof tape 4"W x 40"L tape is self-bonding, water- and airtight, achieves a seal wet or dry and is not affected by saltwater. Easy to use—no liner to remove.
Part No: P059901001W
|
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Buoyancy Bags->Buoyancy Bags
Holt Allen buoyancy bags are made of tough and thoroughly tested heavy duty PVC shaped and finished to fit snugly in your dinghy. The bags are made from PVC 0. 16” thick as specified in British Standard 3501-1.
Part No: SB2402
|
|
|
